BLBaichen Liu

Baichen Liu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Baichen Liu has a total of 23 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A spotter’s guide to electrochemical impedance and distribution of relaxation times spectra in redox flow cells

    by Edward Saunders, Baichen Liu, Antoni Forner-Cuenca, Clare P. Grey, Michaël De Volder

  • Open Access

    Engineering Multimodal Pore Size Distributions in Redox Flow Battery Electrodes via Non-Solvent Induced Phase Separation

    by Baichen Liu, Rémy Richard Jacquemond, Antoni Forner-Cuenca

    Redox flow batteries (RFBs) are promising for large-scale energy storage, but their widespread deployment is limited by elevated capital costs. Advancing porous electrode to achieve high power density is an effective strategy for reducing the system-level costs. Conventional fibrous electrodes are not originally designed for RFBs, resulting in low surface area and suboptimal microstructure. Recently, non-solvent induced phase separation (NIPS) has emerged as a versatile method for fabricating non-fibrous electrodes with engineered architectures. Building on our previous work, we introduce a nanoparticle-assisted templating strategy to achieve multimodal pore networks. CaCO 3 nanoparticles are incorporated into the polymer solution and subsequently removed to template mesopores within the scaffold. By varying the CaCO 3 loading from 2.5 wt.% to 15 wt.%, we systematically evaluate the effects on solution rheology, microstructure, pressure drop, and electrochemical performance. The resulting electrodes exhibit trimodal pore networks, which ensures high permeability, enhanced electrochemical surface area, and efficient electrolyte transport. Electrochemical testing in vanadium RFBs shows a significant increase in peak power density, with optimal performance achieved at 5 wt.% loading (757 mW cm -2 ). These results highlight the benefits of a multimodal pore microstructure in RFB electrodes and open a pathway for electrode engineering applicable to other electrochemical technologies.


  • Open Access

    Engineering Multimodal Pore Size Distributions in Redox Flow Battery Electrodes via Non-Solvent Induced Phase Separation

    by Baichen Liu, Rémy Richard Jacquemond, Antoni Forner-Cuenca

    Redox flow batteries (RFBs) are promising for large-scale energy storage, but their widespread deployment is limited by elevated capital costs. Advancing porous electrode to achieve high power density is an effective strategy for reducing the system-level costs. Conventional fibrous electrodes are not originally designed for RFBs, resulting in low surface area and suboptimal microstructure. Recently, non-solvent induced phase separation (NIPS) has emerged as a versatile method for fabricating non-fibrous electrodes with engineered architectures. Building on our previous work, we introduce a nanoparticle-assisted templating strategy to achieve multimodal pore networks. CaCO 3 nanoparticles are incorporated into the polymer solution and subsequently removed to template mesopores within the scaffold. By varying the CaCO 3 loading from 2.5 wt.% to 15 wt.%, we systematically evaluate the effects on solution rheology, microstructure, pressure drop, and electrochemical performance. The resulting electrodes exhibit trimodal pore networks, which ensures high permeability, enhanced electrochemical surface area, and efficient electrolyte transport. Electrochemical testing in vanadium RFBs shows a significant increase in peak power density, with optimal performance achieved at 5 wt.% loading (757 mW cm -2 ). These results highlight the benefits of a multimodal pore microstructure in RFB electrodes and open a pathway for electrode engineering applicable to other electrochemical technologies.

  • (Keynote) Towards Deterministic Electrode Design for Redox Flow Batteries: Progress and Challenges

    by Antoni Forner-Cuenca, Rémy Richard Jacquemond, Maxime van der Heijden, Mojtaba Barzegari, Inmaculada Gimenez-Garcia, Baichen Liu, Emre Burak Boz

    Porous electrodes are foundational components in electrochemical energy conversion and storage systems. In redox flow batteries (RFBs), electrode materials govern reaction kinetics and mass transport, ultimately defining system performance, durability, and cost. While conventional RFBs typically employ commercially available materials such as carbon felts and papers, emerging research has demonstrated that novel electrode architectures can outperform these fibrous structures. This progress underscores the importance of understanding how microstructure and surface composition influence electrochemical behavior. In this lecture, I will first review the fundamental roles of electrodes in RFBs and outline performance requirements across various flow battery chemistries, supported by illustrative examples from recent literature. I will then highlight three recent developments from our research group: (1) computational design of porous electrodes using high-performance topology optimization frameworks and genetic algorithms 1,2 , (2) scalable manufacturing of tailored electrode architectures 3–5 , and (3) surface and electrolyte engineering strategies to modulate reaction selectivity in hybrid flow battery systems 6,7 . Finally, I will present key electrode performance metrics, discuss characterization techniques to assess them, and conclude with practical guidelines for rational electrode design. References (1) Barzegari, M.; Forner-Cuenca, Chemical Engineering Journal 2025 , 512 , 161815. (2) Van Der Heijden, M.; Szendrei, G.; De Haas, V.; Forner-Cuenca, A., Digital Discovery 2024 , 3 (7), 1292–1307. (3) Integrating Flow Field Geometries within Porous Electrode Architectures for Enhanced Flow Battery, ChemRxiv . https://chemrxiv.org/engage/chemrxiv/article-details/67e7c119fa469535b9e81bbd. (4) Jacquemond, R. R.; Wan, C. T.-C.; Chiang, Y.-M.; Borneman, Z.; Brushett, F. R.; Nijmeijer, K.; Forner-Cuenca, A, Cell Reports Physical Science 2022 , 3 (7), 100943. (5) Wan, C. T.-C.; Jacquemond, R. R.; Chiang, Y.-M.; Nijmeijer, K.; Brushett, F. R.; Forner-Cuenca, Advanced Materials 2021 , 33 (16), 2006716 (6) Boz, E. B.; Bondre, A.; Bruijne, R. de; Forner-Cuenca, Advanced Materials 2025 , 2414596. (7) Gimenez-Garcia, I.; Forner-Cuenca, Electrochimica Acta 2024 , 498 , 144509.

  • Open Access

    Designer diffusion media microstructures enhance polymer electrolyte fuel cell performance

    by Rens J. Horst, Ralph van der Linde, Rémy R. Jacquemond, Baichen Liu, Antoni Forner-Cuenca

    Gas diffusion media are essential components in polymer electrolyte membrane fuel cells and a broad range of electrochemical technologies, enabling efficient mass transport of gas and liquid, electronic and thermal conductivity, and structural integrity under compression. Conventional diffusion media, typically made from carbon fiber substrates with microporous layers, have been extensively post-treated to enhance performance; however, these approaches offer limited control over three-dimensional microstructure, particularly for advanced architectures with bimodal or gradient porosity – which can facilitate multiphase gas and liquid mass transport – and often rely on complex, multi-step processes. These limitations underscore the need for scalable, cost-effective fabrication methods capable of producing much broader geometrical features. Here, we introduce a scalable, bottom-up fabrication method based on non-solvent induced phase separation (NIPS) to produce carbon-based diffusion media with finely tunable microstructures. By systematically varying processing parameters, we generate thin, mechanically robust diffusion media with tailored in-plane and through-plane porosity, including isoporous and bimodal structures. Using microscopy, porosimetry, and electrochemical diagnostics, we correlate microstructural features with single-cell fuel cell performance, revealing their impact on water management and gas transport. We further demonstrate post-treatment strategies to enhance mass transport properties and benchmark the cost and scalability of NIPS fabrication against conventional carbon fiber-based diffusion media via techno-economic analysis. Our findings highlight the potential of NIPS as a versatile and industrially relevant pathway for next-generation diffusion media, offering new design freedoms to optimize fuel cell performance and reduce system-level costs.


  • Open Access

    Integrating Flow Field Geometries within Porous Electrode Architectures for Enhanced Flow Battery Performance

    by Baichen Liu, Rémy Richard Jacquemond, Vanesa Muñoz-Perales, Simona Buzzi, Johan Hjelm, Antoni Forner-Cuenca

    The large-scale adoption of renewable energy demands efficient and cost-effective storage solutions, with redox flow batteries (RFBs) emerging as promising candidates for grid-scale applications. However, their deployment remains constrained by high capital costs, largely driven by the need for advanced porous electrodes that balance high surface area, efficient mass transport, and low pressure drop. Compared to conventional, carbon-fiber-based porous electrodes, non-solvent induced phase separation (NIPS) offers a versatile manufacturing approach to tailor electrode microstructures and enhance electrochemical performance, yet optimizing mass transport remains a key challenge. Here, we introduce a micro-patterning strategy that directly integrates flow field architectures into the electrode structure during NIPS fabrication as a potentially scalable manufacturing approach. Inspired by flow field designs in fuel cells and flow batteries, we imprint groove and pillar micro-patterns to enhance in-plane and through-plane mass transport. Using symmetric iron flow cells, we show that pillar-patterned electrodes, combined with an interdigitated flow field, significantly reduce mass transfer resistance and improve electrochemical performance while maintaining a low pressure drop. This work presents a simple, scalable, and cost-effective electrode design strategy to boost RFB power density and advance the economic viability of redox flow battery technology.

  • Manufacturing Multiscale Porous Electrodes with Non-Solvent Induced Phase Separation for High Performance Redox Flow Battery Electrodes

    by Baichen Liu, Rémy Richard Jacquemond, Antoni Forner-Cuenca

    Redox flow batteries (RFBs) have attracted growing interest as a promising solution for large-scale energy storage in recent years[1], offering the distinct advantage of decoupling power and energy capacity. However, their broader adoption is hindered by elevated capital costs, to which the reactor stack is a major contributor[2]. One cost-reduction strategy involves advancing porous electrode technology to achieve high power output while reducing the stack size. As critical components within the battery stack, porous electrodes perform a variety of functions, including providing electrochemically active surface area, facilitating mass transfer and fluid flow, and conducting electrons and heat [3]. Commercial RFB electrodes are primarily limited to fibrous materials, such as carbon felt, paper, and cloth. However, these materials are not specifically designed for RFBs[4], with their performance constrained by low surface area (e.g., 2/g[5]) and limited microstructure versatility. Ultimately, the current generation of materials results in suboptimal performance and limits further performance and cost improvements. Recently, our group introduced the non-solvent induced phase separation (NIPS) method for synthesizing non-fibrous porous electrodes[6][7]. This technique, inspired by membrane technology, enables highly engineered microstructures specifically tailored for the requirements of RFBs. The process involves dissolving a polymer mixture containing a carbon precursor (e.g., Polyacrylonitrile) and a pore-forming agent (e.g., Polyvinylpyrrolidone) in a solvent (e.g., N,N-dimethylformamide). The polymer solution is cast onto a mold and immersed in a non-solvent (e.g., water) to induce phase separation. Finally, the polymeric scaffold is carbonized under inert atmosphere to form a conductive carbonaceous network. The microstructure of the NIPS electrodes can be controlled by adjusting the conditions of the solvent/non-solvent exchange process, which enables features such as macrovoids, isoporous, and porosity gradient structures. However, incorporating nanoscale porosity while retaining the multiscale structure would further enhance the available surface area, but has remained challenging to achieve with the traditional NIPS approach. Building on our previous work, we introduce a nanoparticle-assisted strategy to introduce additional nanoscale porosity into the NIPS electrodes to enable multi-modal pore size distributions. Specifically, CaCO3 nanoparticles with the average diameter of ~20 nm were incorporated into the casting polymer solution. During the phase exchange process, the CaCO3 nanoparticles remained embedded in the NIPS scaffold. In a subsequent step, the polymer film was immersed in an HCl solution to generate CO2 bubbles, which regulated the formation of additional porosity within the NIPS structure. We varied the CaCO3 loading from 2.5 wt.% to 15 wt.% and characterized the synthesized electrodes to evaluate their physicochemical properties and performance. Microstructural characterization revealed a multimodal pore size distribution including interconnected finger-shaped macrovoid (pore diameter of ~50 μm), micro-scale pores (pore diameter of ~2-5 μm) forming ladder-like networks, and coupled with nano-scale pores (pore diameter of ~100-500 nm) within the scaffold. This hierarchical pore structure enables a large surface area with abundant reaction sites and facile electrolyte penetration pathways for reduced mass transfer resistance within the electrode. Additionally, we performed electrochemical tests using symmetric iron cells and vanadium full cells, and demonstrated a significant reduction in charge transfer resistance of the nanoparticle-doped electrodes due to the enhanced surface area. Overall, we find that the highest power density was achieved at 5 wt.% CaCO3 loading where a tradeoff between charge transfer and mass transfer resistance was obtained. The developed method emerges as a simple and effective technique for developing high-performance porous electrodes, advancing their application in RFBs.

  • Open Access

    Designer diffusion media microstructures enhance polymer electrolyte fuel cell performance

    by Rens J. Horst, Ralph van der Linde, Rémy R. Jacquemond, Baichen Liu, Antoni Forner-Cuenca

    Gas diffusion media are essential components in polymer electrolyte membrane fuel cells and a broad range of electrochemical technologies, enabling efficient mass transport of gas and liquid, electronic and thermal conductivity, and structural integrity under compression. Conventional diffusion media, typically made from carbon fiber substrates with microporous layers, have been extensively post-treated to enhance performance; however, these approaches offer limited control over three-dimensional microstructure, particularly for advanced architectures with bimodal or gradient porosity – which can facilitate multiphase gas and liquid mass transport – and often rely on complex, multi-step processes. These limitations underscore the need for scalable, cost-effective fabrication methods capable of producing much broader geometrical features. Here, we introduce a scalable, bottom-up fabrication method based on non-solvent induced phase separation (NIPS) to produce carbon-based diffusion media with finely tunable microstructures. By systematically varying processing parameters, we generate thin, mechanically robust diffusion media with tailored in-plane and through-plane porosity, including isoporous and bimodal structures. Using microscopy, porosimetry, and electrochemical diagnostics, we correlate microstructural features with single-cell fuel cell performance, revealing their impact on water management and gas transport. We further demonstrate post-treatment strategies to enhance mass transport properties and benchmark the cost and scalability of NIPS fabrication against conventional carbon fiber-based diffusion media via technoeconomic analysis. Our findings highlight the potential of NIPS as a versatile and industrially relevant pathway for next-generation diffusion media, offering new design freedoms to optimize fuel cell performance and reduce system-level costs.

  • Open Access

    Morphological Properties and Electrochemical Performance for Compressed Carbon-fiber Electrodes in Redox Flow Batteries

    by Baichen Liu, Søren Bredmose Simonsen, Johan Hjelm

    Improving reactor performance of redox flow batteries is critical to reduce capital cost, and one of the main contributions to the internal resistance is generated by the electrodes, which also impact the pressure drop of the stack. Porous electrodes with optimized microstructure and physiochemical properties play a key role in enhancing electrochemical and fluid dynamic performance. Electrode compression significantly impacts morphology and battery behavior, but the relationship between microstructure and performance remains unclear. In the present study, three representative, commercially available, carbon-fiber electrodes (i.e., paper, felt, and cloth) with distinct microstructures were investigated, and a comprehensive study was conducted to compare morphology, hydraulic permeability, mechanical behavior, electrochemical performance in a lab-scale vanadium redox flow battery at compression ratios of 0%–50%. The 3D electrode morphology was characterized through X-ray computed tomography and the extracted microstructure parameters (e.g., surface area and tortuosity) were compared with corresponding electrochemically determined parameters. The optimal trade-off between fluid dynamics and electrochemical performance occurred at the compression ratios of 30%, 20%, and 20% for the felt, paper, and cloth, respectively. Owing to the bi-modal porosity of the woven microstructure, the cloth showed a better trade-off between the electrochemical performance and pressure drop than the other electrodes.


  • Integrating Micro-Patterned Flow Fields into Electrode Architecture Via Non-Solvent Induced Phase Separation for High Performance Redox Flow Batteries

    by Baichen Liu, Rémy Jacquemond, Johan Hjelm, Antoni Forner-Cuenca

    To facilitate increasing penetration of intermittent renewables in the energy mix, there is a growing need for energy storage technologies. Redox flow batteries (RFBs) have attracted significant attention in recent years due to their suitable characteristics for long-duration stationary energy storage applications. However, the wider adoption of RFB systems is still limited by the capital cost, to which the reactor stack is a large contributor[1]. Further cost reduction can be achieved by reducing kinetic, mass-transfer, and ohmic losses to improve the stack performance. Porous electrodes are key components within the battery stack, providing active sites for electrochemical reactions, and transport pathways for active species. Commercially available carbon-fiber electrode architectures include carbon paper, carbon felt, and carbon cloth. They have a highly porous structure, but their relatively low surface area and low hierarchical fiber orientation increase both electrochemical and pumping losses[2]. There is still a need to develop a low-cost porous electrode that meets the requirements of high active surface area and facile electrolyte transport to enhance battery performance and system efficiency. Non-solvent induced phase separation (NIPS) is a manufacturing route in the field of membrane technology, which is widely used to fabricate asymmetric membranes[3]. Recently this route has also been used to fabricate non-fibrous porous electrodes[4]. The microstructure of NIPS electrodes is largely influenced and controlled by the solvent/non-solvent exchange rate at the interface between a polymer solution and a coagulation bath. When the phase exchange process is slow, segregation is delayed. This type of segregation generally results in a sponge-like, relatively dense structure[5]. This sponge-like structure has the advantage of small pore size and high surface area, but also has poor hydraulic permeability and high mass-transfer losses. The trade-off between surface area and permeability needs to be further optimized. In the present study, inspired by the flow field designs widely used in RFBs to guide the electrolyte flow paths for low pressure drop, uniform electrolyte distribution, and high electrochemical performance[6], we propose a strategy to imprint micro-patterned flow fields directly into the electrode architecture during NIPS processing to improve mass transfer properties. NIPS polymer films were cast onto molds with specific micro-patterns, and the resulting micro-channels can be preserved in the electrodes after carbonization. To verify the effectiveness of the micro-patterned electrodes, here, we investigate two selected micro-patterned designs. The groove-patterned electrodes were combined with flow-through flow fields (FT-FFs) for in-plane mass transport optimization, and the pillar-patterned electrodes were combined with interdigitated flow fields (IDFFs) for through-plane flow optimizations[7]. Two geometric sizes of the micro-patterns were considered in each design. The pore sizes and distributions of the micro-patterned electrodes were determined by mercury intrusion porosimetry. The hydraulic permeability of the electrodes was evaluated by half-cell pressure drop measurements, and the electrochemical specific surface area was determined through electrochemical impedance spectroscopy under non-faradaic conditions. In addition, we performed electrochemical battery tests with symmetric iron RFB (0.5 M Fe2+/Fe3+, 2 M HCl) cells and vanadium full-cells (1.6 M V active species at 50% state-of-charge). It was found that due to the small pore size (e.g., ~1 μm) and narrow pore size distribution of the sponge-like NIPS structure, the main contribution to the total losses in electrodes without micro-patterns in electrochemical performance comes from mass-transfer. Electrodes with groove and pillar patterns can help reduce the pressure drop and improve mass transfer properties. Pillar-patterned electrodes with the combination of IDFF show high overall electrochemical performance with greatly reduced mass transport resistances. At an electrolyte velocity of 10 cm/s, the total resistances for kinetic and mass transfer are less than 0.1 Ω·cm2 in symmetric iron cell tests. Compared to the activated commercial electrode (e.g., 2-layer Freudenberg H23 carbon paper, thermally treated at 450 oC for 12 h), the total resistances for kinetic and mass transfer are reduced by ~60%, which shows great potential for adoption in next generation high-performance RFB systems. References J. Noack, L. Wietschel, N. Roznyatovskaya, K. Pinkwart, J. Tübke, Energies, 9, 627 (2016). A. Forner-Cuenca, F.Brushett, Current Opinion in Electrochemistry, 18, 113-122 (2019). H. Wang, J. Jung, J. Kim, S. Kim, E. Drioli, Y. Lee, Journal of Membrane Science, 574, 44-54 (2019). C. Wan, R. Jacquemond, Y. Chiang, K. Nijmeijer, F. Brushett, A. Forner-Cuenca, Advanced Materials, 33, 2006716 (2021). D. Wang, J. Lai, Current Opinion in Chemical Engineering, 2, 229-237 (2013). X. Ke, J. Prahl, J. Alexander, J. Wainright, T. Zawodzinski, R. Savinell, Chemical Society Reviews, 23, 8721-8743 (2018). V. Muñoz-Perales, P. García-Salaberri, A. Mularczyk, S. Ibáñez, M. Vera, A. Forner-Cuenca, ChemRxiv, (2023).