JWJun Wang

Jun Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jun Wang has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Nonlinear Attenuation and Quantitative Evaluation of Aerodynamic Performance for Wing Hail Pits Based on Damage Tolerance

    by Xiaoyu Guo, Heming Zhao, Yuhao Wu, Shuwen Zhao, Fei Xie, Honghui Fan, Jun Wang

    This study aims to analyze how hail pit damage on aircraft wing surfaces affects flight safety after hail impact, characterize the aerodynamic performance degradation, and establish a quantitative evaluation method. Computational fluid dynamics (CFD) simulations are performed using a three-dimensional wing model, and the Shear Stress Transport (SST) k-ω turbulence model is adopted for numerical simulation. The effects of hail pits with different numbers (0–50) and diameters (10–20 mm) on the aerodynamic performance of the wing are investigated under various Mach numbers (0.7–2.0) and angles of attack. By analyzing lift, drag and lift-to-drag ratio and introducing a decay rate for quantitative analysis, it is found that the attenuation of aerodynamic performance exhibits distinct nonlinear characteristics. The maximum performance variation rate does not appear under the condition with the largest number of hail pits. Instead, it peaks at ten pits, and the maximum lift–drag ratio variation rate reaches 33.7% at the transonic Mach number of 1.3. As the number of pits continues to increase, the extent of aerodynamic performance variation does not intensify concurrently but enters a slowly growing plateau stage. Simulation results reveal that intense flow separation and consequent drastic variation in aerodynamic performance are observed for airfoils with sparse hail pits under transonic conditions. As the number of pits increases, densely distributed pits restrain severe flow separation and drive aerodynamic performance degradation toward saturation, and the relevant mechanism is tentatively attributed to surface roughening and flow turbulization effects. As a parametric engineering CFD study, the present findings can serve as preliminary engineering references for similar parametric CFD analyses, as well as for aircraft release assessment and pilot operational decision-making when in-flight hail damage occurs.

  • Open Access

    Numerical Study on Aerodynamic Characteristics of Dual-Ducted Fan System for UAVs Under Coupled Effects of Ground Clearance and Duct Gap

    by Shuwen Zhao, Heming Zhao, Zhiling Peng, Jun Wang, Fei Xie, Xiaoyu Guo

    Due to their low noise and high efficiency, ducted fans are extensively used in unmanned aerial vehicles (UAVs). As the core lift and propulsion units, the aerodynamic performance of dual-ducted fans critically determines propulsion efficiency and flight stability. However, when operating near the ground, variations in ground clearance and the gap between ducts disrupt the isolated flow fields, introducing ground effect and aerodynamic coupling that pose significant stability risks. To address this, we developed a high-fidelity numerical model using the Unsteady Reynolds-Averaged Navier–Stokes approach with sliding mesh technology and the Shear-Stress Transport k-ω turbulence model. This study reveals the macroscopic aerodynamic characteristics of dual-ducted fans as functions of ground clearance and duct gap, and clarifies the underlying flow mechanisms. The research results indicate that the performance of a signle-ducted fan is highly sensitive to ground clearance: a critical threshold of thrust occurs when the ground clearance (h) at the duct outlet is 0.75 times the rotor disk diameter (D). Under ground-effect-free conditions, the dual duct gap dominates the aerodynamic interference pattern: the total thrust of the system reaches its maximum value when the minimum spacing between the outer edges of the two ducts is 6 times the rotor disk radius. The coupling effect of ground clearance and duct gap exhibits significant nonlinear characteristics: thrust first decreases and then increases with increasing ground clearance, and the sensitive range of gap variation is h/D=0.5–1.0. These findings are crucial for optimizing the layout of ducted UAVs and enhancing UAV flight control to ensure safe and efficient operation under near-ground conditions.


  • Open Access

    Boosting the Electrochemical Storage Properties of Co3O4 Nanowires by the Mn Doping Strategy with Appropriate Mn Doping Concentrations

    by Jun Wang, Huifang Zhang, Haoyan Duan, Heming Zhao, Juncheng Qi, Boxiang Ma, Honghui Fan

    High specific capacitance, high energy density, and high power density have always been important directions for the improvement of electrode materials for supercapacitors. In this paper, Co3O4 nanowire arrays with various Mn doping concentrations (Mn:Co molar ratio = 1:11, 1:5, 1:2) directly grown on nickel foam (NF) were prepared by a simple hydrothermal method and annealing process. The influence of Mn doping on the morphology, structure, and electrochemical behaviors of Co3O4 was investigated. The results show that partial substitution of Co ions with Mn ions in the spinel structure does not change the nanowire morphology of pure Co3O4 but increases the lattice parameter and decreases the crystallinity of cobalt oxide. Electrochemical measurements showed that Mn doping in Co3O4 could effectively enhance the redox activity, especially Co3O4 with a Mn doping ratio of 1:5, which exhibits the most excellent electrochemical performance, with the maximum specific capacitance of 1210.8 F·g–1 at 1 A·g–1 and a rate capability of 33.0% at 30 A·g–1. The asymmetric supercapacitor (ASC) device assembled with the optimal Mn–Co3O4 (1:5) and activated carbon (AC) electrode performs a high specific capacitance of 105.8 F·g–1, a high energy density of 33 Wh·kg–1 at a power density of 748.1 W·kg–1, and a capacitance retention of 60.2% after 5000 cycles. This work indicates that an appropriate Mn doping concentration in the Co3O4 lattice structure will have great potential in rationalizing the design of spinel oxides for efficient electrochemical performance.