Jianlin Tang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jianlin Tang has a total of 56 co-authors. Here are the top co-authors by number of shared publications:
Bin Qian
CSG Electric Power Research Institute Co., Ltd., Guangzhou, China
8 shared publications- Xiaoming Lin
Electric Power Research Institute of CSG, Guangzhou 510663, China
6 shared publications Xiaoming Lin
CSG Electric Power Research Institute Co., Ltd., Guangzhou, China
5 shared publications- Bin Qian
Electric Power Research Institute of CSG, Guangzhou, China
4 shared publications - Fan Zhang
Electric Power Research Institute of CSG, Guangzhou 510663, China
4 shared publications Fan Zhang
CSG Electric Power Research Institute Co., Ltd., Guangzhou, China
3 shared publications
Latest Publications
- Open Access
- 2 September 2025
- Published by Springer Nature in International Journal of Computational Intelligence Systems
- Vol. 18 (1) , 1-23
Reinforcement-Learning-Based V2G Scheduling: Peak Load Mitigation and Financial Benefits
- 2 September 2025
- Published by Springer Nature in International Journal of Computational Intelligence Systems
- Vol. 18 (1) , 1-23
Open AccessReinforcement-Learning-Based V2G Scheduling: Peak Load Mitigation and Financial Benefits
- 13 August 2025
- Published by Springer Nature
- p. 110-123
Sensitive Behavior Learning Based on Side Channel Data for Smart Terminal Applications in Power IoT
- 13 August 2025
- Published by Springer Nature
- p. 110-123
Sensitive Behavior Learning Based on Side Channel Data for Smart Terminal Applications in Power IoT
- Open Access
- 11 July 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (14) , 6357
Modeling and Analysis of Carbon Emissions Throughout Lifecycle of Electric Vehicles Considering Dynamic Carbon Emission Factors
Amidst the global strategic transition towards low-carbon energy systems, electric vehicles (EVs) are pivotal for achieving deep decarbonization within the transportation sector. Consequently, enhancing the scientific rigor and precision of their life-cycle carbon footprint assessments is of paramount importance. Addressing the limitations of existing research, notably ambiguous assessment boundaries and the omission of dynamic coupling characteristics, this study develops a dynamic regional-level life-cycle carbon footprint assessment model for EVs that incorporates time-variant carbon emission factors. The methodology first delineates system boundaries based on established life-cycle assessment (LCA) principles, establishing a comprehensive analytical framework encompassing power battery production, vehicle manufacturing, operational use, and end-of-life recycling. Subsequently, inventory analysis is employed to model carbon emissions during the production and recycling phases. Crucially, for the operational phase, we introduce a novel source–load synergistic optimization approach integrating dynamic carbon intensity tracking. This is achieved by formulating a low-carbon dispatch model that accounts for power grid security constraints and the spatiotemporal distribution of EVs, thereby enabling the calculation of dynamic nodal carbon intensities and consequential EV emissions. Finally, data from these distinct stages are integrated to construct a holistic life-cycle carbon accounting system. Our results, based on a typical regional grid scenario, reveal that indirect carbon emissions during the operational phase contribute 75.1% of the total life-cycle emissions, substantially outweighing contributions from production (23.4%) and recycling (1.5%). This underscores the significant carbon mitigation leverage of the use phase and validates the efficacy of our dynamic carbon intensity model in improving the accuracy of regional-level EV carbon accounting.
- 11 July 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (14) , 6357
Open AccessModeling and Analysis of Carbon Emissions Throughout Lifecycle of Electric Vehicles Considering Dynamic Carbon Emission Factors
Amidst the global strategic transition towards low-carbon energy systems, electric vehicles (EVs) are pivotal for achieving deep decarbonization within the transportation sector. Consequently, enhancing the scientific rigor and precision of their life-cycle carbon footprint assessments is of paramount importance. Addressing the limitations of existing research, notably ambiguous assessment boundaries and the omission of dynamic coupling characteristics, this study develops a dynamic regional-level life-cycle carbon footprint assessment model for EVs that incorporates time-variant carbon emission factors. The methodology first delineates system boundaries based on established life-cycle assessment (LCA) principles, establishing a comprehensive analytical framework encompassing power battery production, vehicle manufacturing, operational use, and end-of-life recycling. Subsequently, inventory analysis is employed to model carbon emissions during the production and recycling phases. Crucially, for the operational phase, we introduce a novel source–load synergistic optimization approach integrating dynamic carbon intensity tracking. This is achieved by formulating a low-carbon dispatch model that accounts for power grid security constraints and the spatiotemporal distribution of EVs, thereby enabling the calculation of dynamic nodal carbon intensities and consequential EV emissions. Finally, data from these distinct stages are integrated to construct a holistic life-cycle carbon accounting system. Our results, based on a typical regional grid scenario, reveal that indirect carbon emissions during the operational phase contribute 75.1% of the total life-cycle emissions, substantially outweighing contributions from production (23.4%) and recycling (1.5%). This underscores the significant carbon mitigation leverage of the use phase and validates the efficacy of our dynamic carbon intensity model in improving the accuracy of regional-level EV carbon accounting.
- Open Access
- 26 May 2025
- Published by Springer Nature in International Journal of Computational Intelligence Systems
- Vol. 18 (1) , 1-16
Optimization Scheduling of Multiple Heterogeneous Energy Sources
- 26 May 2025
- Published by Springer Nature in International Journal of Computational Intelligence Systems
- Vol. 18 (1) , 1-16
Open AccessOptimization Scheduling of Multiple Heterogeneous Energy Sources
- Open Access
- 9 May 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (10) , 4299
Low-Carbon Optimization Scheduling for Systems Considering Carbon Responsibility Allocation and Electric Vehicle Demand Response
To achieve low carbon emissions in the power system and contribute to economic growth, a low-carbon optimization scheduling strategy for a power system, considering carbon responsibility sharing and electric vehicle demand response, is proposed based on the establishment of a flexible-load model guided by carbon potential. Firstly, utilizing the principle of proportional sharing to track carbon emission flow and establish a carbon emission flow model. Secondly, based on the Shapley value carbon responsibility allocation method, the reasonable range of carbon responsibility on each load side is calculated, and a hierarchical carbon price is established. A load aggregator demand response carbon emission model is established using the node carbon potential, and a dual-layer optimization scheduling model for the power system based on the node carbon potential demand response is constructed. The upper layer of the model is the optimal economic dispatch of the power grid operator, and the lower layer is the demand response economic dispatch of the load aggregator. Through numerical verification, the carbon trading model takes into account the system’s carbon emissions and overall operating costs while balancing the system’s low-carbon and economic aspects.
- 9 May 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (10) , 4299
Open AccessLow-Carbon Optimization Scheduling for Systems Considering Carbon Responsibility Allocation and Electric Vehicle Demand Response
To achieve low carbon emissions in the power system and contribute to economic growth, a low-carbon optimization scheduling strategy for a power system, considering carbon responsibility sharing and electric vehicle demand response, is proposed based on the establishment of a flexible-load model guided by carbon potential. Firstly, utilizing the principle of proportional sharing to track carbon emission flow and establish a carbon emission flow model. Secondly, based on the Shapley value carbon responsibility allocation method, the reasonable range of carbon responsibility on each load side is calculated, and a hierarchical carbon price is established. A load aggregator demand response carbon emission model is established using the node carbon potential, and a dual-layer optimization scheduling model for the power system based on the node carbon potential demand response is constructed. The upper layer of the model is the optimal economic dispatch of the power grid operator, and the lower layer is the demand response economic dispatch of the load aggregator. Through numerical verification, the carbon trading model takes into account the system’s carbon emissions and overall operating costs while balancing the system’s low-carbon and economic aspects.
- Open Access
- 24 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 74147-74162
Optimized Scheduling of Integrated Energy Systems Considering Electric Vehicles and Carbon Emission Trading
This study proposes an optimized dispatch model for integrated energy systems (IES), incorporating electric vehicles (EVs) and carbon emission trading (CET) to address the interactions between EV scale and CET within IES. The model aims to minimize the overall cost of the IES by evaluating the impact of varying EV scales and CET parameters on both costs and carbon emission reductions.Firstly, Monte Carlo simulations are used to describe the uncertain parameters of EVs. Secondly, a stepped CET mechanism is constructed based on carbon emissions. Then, the segmented linearization method and convex relaxation method are employed to linearize the model. Finally, YALMIP and GUROBI are utilized to solve the problem, and the results of eight scheduling models are compared and analyzed.The findings reveal that integrating EVs and carbon capture technologies under the CET framework can reduce system operating costs by 7.64% and carbon emissions by 17.68%. As the number of EVs increases, the system's actual carbon emissions initially decline but eventually rise, with the lowest emissions occurring at an EV load penetration rate of 9.20%. Under the stepped CET mechanism, maximum carbon reduction from optimized EV charging and discharging is achieved when CET prices range from 250 to 300 CNY/t, and EV load penetration rates range between 12.31% and 19.43%.
- 24 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 74147-74162
Open AccessOptimized Scheduling of Integrated Energy Systems Considering Electric Vehicles and Carbon Emission Trading
This study proposes an optimized dispatch model for integrated energy systems (IES), incorporating electric vehicles (EVs) and carbon emission trading (CET) to address the interactions between EV scale and CET within IES. The model aims to minimize the overall cost of the IES by evaluating the impact of varying EV scales and CET parameters on both costs and carbon emission reductions.Firstly, Monte Carlo simulations are used to describe the uncertain parameters of EVs. Secondly, a stepped CET mechanism is constructed based on carbon emissions. Then, the segmented linearization method and convex relaxation method are employed to linearize the model. Finally, YALMIP and GUROBI are utilized to solve the problem, and the results of eight scheduling models are compared and analyzed.The findings reveal that integrating EVs and carbon capture technologies under the CET framework can reduce system operating costs by 7.64% and carbon emissions by 17.68%. As the number of EVs increases, the system's actual carbon emissions initially decline but eventually rise, with the lowest emissions occurring at an EV load penetration rate of 9.20%. Under the stepped CET mechanism, maximum carbon reduction from optimized EV charging and discharging is achieved when CET prices range from 250 to 300 CNY/t, and EV load penetration rates range between 12.31% and 19.43%.
- Open Access
- 11 April 2025
- Published by MDPI AG in Electronics
- Vol. 14 (8) , 1550
Multi-Objective Day-Ahead Scheduling for Air Conditioning Load Considering Dynamic Carbon Emission Factor
The traditional optimal scheduling of air conditioning load has traditionally focused on improving user comfort and reducing electricity costs. However, research on carbon emissions generated during the operation of air conditioning is still in the developmental stage. Currently used average carbon emission factors in carbon-emission studies face challenges such as delayed data updates and difficulty in reflecting spatiotemporal variations. These issues contribute to the inaccurate quantification of carbon emissions, creating a challenging situation, which does not meet the development needs of green power systems under the “dual carbon goals”. Therefore, this paper proposes a multi-objective scheduling method for cooling-dominant air conditioning load considering the dynamic carbon emission factor (CEF), in conjunction with real-time spatiotemporal data from the electricity grid model, generates the electric carbon factor for each moment throughout the day. Firstly, while considering user comfort, the dynamic CEF-based carbon-emission cost and electricity cost are fused into the user’s comprehensive electricity cost, and a multi-objective optimization model for day-ahead scheduling of air conditioning loads is established. In addition, the above model is solved by the NSGA-II algorithm to obtain the Pareto front composed of non-dominated solutions. Then, the best compromise solution is objectively selected through gray target decision (GTD) to provide scientific decision-making for day-ahead scheduling of cooling-dominant air conditioning loads. Finally, four users with different air conditioning loads and room temperature requirements are designed to verify the effectiveness of the proposed strategy. The simulation results illustrate that compared with single-objective optimization and simple multi-objective decision-making methods, the proposed strategy possesses a stronger trade-off ability, which can greatly reduce the comprehensive electricity cost while ensuring user comfort.
- 11 April 2025
- Published by MDPI AG in Electronics
- Vol. 14 (8) , 1550
Open AccessMulti-Objective Day-Ahead Scheduling for Air Conditioning Load Considering Dynamic Carbon Emission Factor
The traditional optimal scheduling of air conditioning load has traditionally focused on improving user comfort and reducing electricity costs. However, research on carbon emissions generated during the operation of air conditioning is still in the developmental stage. Currently used average carbon emission factors in carbon-emission studies face challenges such as delayed data updates and difficulty in reflecting spatiotemporal variations. These issues contribute to the inaccurate quantification of carbon emissions, creating a challenging situation, which does not meet the development needs of green power systems under the “dual carbon goals”. Therefore, this paper proposes a multi-objective scheduling method for cooling-dominant air conditioning load considering the dynamic carbon emission factor (CEF), in conjunction with real-time spatiotemporal data from the electricity grid model, generates the electric carbon factor for each moment throughout the day. Firstly, while considering user comfort, the dynamic CEF-based carbon-emission cost and electricity cost are fused into the user’s comprehensive electricity cost, and a multi-objective optimization model for day-ahead scheduling of air conditioning loads is established. In addition, the above model is solved by the NSGA-II algorithm to obtain the Pareto front composed of non-dominated solutions. Then, the best compromise solution is objectively selected through gray target decision (GTD) to provide scientific decision-making for day-ahead scheduling of cooling-dominant air conditioning loads. Finally, four users with different air conditioning loads and room temperature requirements are designed to verify the effectiveness of the proposed strategy. The simulation results illustrate that compared with single-objective optimization and simple multi-objective decision-making methods, the proposed strategy possesses a stronger trade-off ability, which can greatly reduce the comprehensive electricity cost while ensuring user comfort.
- 28 February 2025
- Published by Springer Nature
- p. 423-430
Orderly Charging Strategy Based on Total Time Minimization
- 28 February 2025
- Published by Springer Nature
- p. 423-430
Orderly Charging Strategy Based on Total Time Minimization
- Open Access
- 1 February 2025
- Published by AIP Publishing in AIP Advances
- Vol. 15 (2)
Novel efficient deep reinforcement learning-based load frequency control for isolated microgrid
This study introduces a Learning-based Load Frequency Control (LB-LFC) approach to manage the challenges posed by renewable energy’s intermittency in microgrids, which often causes load disturbances, frequency fluctuations, and higher generation costs. The LB-LFC method employs reinforcement learning to balance generation costs and frequency stability effectively. In addition, a novel sort replay actor critic technique is proposed, leveraging the deep deterministic policy gradient algorithm and sort experience replay to enhance control efficiency and robustness. This dual-objective control strategy not only improves frequency management but also aims to reduce generation expenses. The effectiveness of this approach is validated through simulations on the isolated microgrid load frequency control model of China Southern Grid.
- 1 February 2025
- Published by AIP Publishing in AIP Advances
- Vol. 15 (2)
Open AccessNovel efficient deep reinforcement learning-based load frequency control for isolated microgrid
This study introduces a Learning-based Load Frequency Control (LB-LFC) approach to manage the challenges posed by renewable energy’s intermittency in microgrids, which often causes load disturbances, frequency fluctuations, and higher generation costs. The LB-LFC method employs reinforcement learning to balance generation costs and frequency stability effectively. In addition, a novel sort replay actor critic technique is proposed, leveraging the deep deterministic policy gradient algorithm and sort experience replay to enhance control efficiency and robustness. This dual-objective control strategy not only improves frequency management but also aims to reduce generation expenses. The effectiveness of this approach is validated through simulations on the isolated microgrid load frequency control model of China Southern Grid.
- 14 October 2024
- Published by Wiley in International Journal of Circuit Theory and Applications
- Vol. 53 (7) , 4198-4209
An Ultra‐High Voltage AC/DC Isolated Matrix Converter Applied to V2G Electric Vehicle Charging Piles
In recent years, in order to alleviate global environmental problems, renewable energy power generation and the electric vehicle industry have been vigorously promoted by many countries. During this background, many scholars have proposed the development of vehicle‐to‐grid (V2G) systems to alleviate the impact of renewable energy generation on grid quality, and electric vehicle charging piles are the core part of realizing V2G systems. This article proposes an ultra‐high voltage AC/DC isolated matrix converter applied to V2G electric vehicle charging piles, which can achieve bidirectional flow of energy, and proposes the control strategy that can reduce the current stress of the device. In addition, the ultra‐high voltage module of the proposed topology can provide wide voltage range and high voltage charging power for different types of electric vehicles. The proposed topology and control strategy are verified by simulation.
- 14 October 2024
- Published by Wiley in International Journal of Circuit Theory and Applications
- Vol. 53 (7) , 4198-4209
An Ultra‐High Voltage AC/DC Isolated Matrix Converter Applied to V2G Electric Vehicle Charging Piles
In recent years, in order to alleviate global environmental problems, renewable energy power generation and the electric vehicle industry have been vigorously promoted by many countries. During this background, many scholars have proposed the development of vehicle‐to‐grid (V2G) systems to alleviate the impact of renewable energy generation on grid quality, and electric vehicle charging piles are the core part of realizing V2G systems. This article proposes an ultra‐high voltage AC/DC isolated matrix converter applied to V2G electric vehicle charging piles, which can achieve bidirectional flow of energy, and proposes the control strategy that can reduce the current stress of the device. In addition, the ultra‐high voltage module of the proposed topology can provide wide voltage range and high voltage charging power for different types of electric vehicles. The proposed topology and control strategy are verified by simulation.