Neel Kamal Gupta
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Neel Kamal Gupta has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Henning Zeidler
Institute for Machine Elements, Design and Manufacturing, TU Bergakademie Freiberg, 09599 Freiberg, Germany
6 shared publications - Karuppasamy Poolan Karunakaran
Indian Institute of Technology Bombay, Mumbai, India
4 shared publications - Shahu R. Karade
Department of Mechanical Engineering, Indian Institute of Technology Bombay, Powai, Mumbai-400076, India, India
4 shared publications - G. Ganesan
Department of Metallurgical Engineering and Material Science, Indian Institute of Technology Bombay, Mumbai 400076, India
3 shared publications - Rezo Aliyev
Institute for Machine Elements, Engineering Design and Manufacturing, TU Bergakademie Freiberg, Freiberg, Germany
3 shared publications - Siddhartha Siddhartha
Department of Mechanical Engineering, Indian Institute of Technology Bombay, Mumbai 400076, India
3 shared publications
Latest Publications
- 30 March 2026
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 35 (28) , 28776-28789
Investigation of Microstructural Features and Mechanical Performance in Wire Arc Additive Manufactured Dissimilar Metal Cladding of Mild Steel (ER70S-6) and Aluminium Alloy (Al-4043)
- 30 March 2026
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 35 (28) , 28776-28789
Investigation of Microstructural Features and Mechanical Performance in Wire Arc Additive Manufactured Dissimilar Metal Cladding of Mild Steel (ER70S-6) and Aluminium Alloy (Al-4043)
- Open Access
- 11 February 2026
- Published by Springer Nature in Progress in Additive Manufacturing
- Vol. 11 (4) , 3655-3675
Multi-material glass additive manufacturing: a review of materials, techniques, and integration challenges
Glass offers unique advantages such as high optical transparency, thermal stability, and chemical resistance, making it indispensable in optics, microelectronics, sensing, and biomedical applications. However, its high melting point, brittle nature, and incompatibility with traditional manufacturing methods present significant fabrication challenges. Additive manufacturing (AM) introduces new possibilities for the glass industry by enabling the fabrication of customised, complex 3D structures and the integration of glass with other compatible materials. In particular, multi-material glass additive manufacturing (MMGAM) has emerged as a promising frontier, enabling both the spatial tuning of glass composition, dopants, and functionalities, as well as the co-fabrication of glass with dissimilar materials, such as polymers, metals, or ceramics, within a single component using integrated AM platforms. This paper provides a comprehensive overview of the current state of MMGAM, structured around four key themes: (i) key material properties and interfacial compatibility considerations, (ii) AM techniques adapted for multi-material glass systems, (iii) material combinations and strategies for functional integration, and (iv) future challenges and research directions. Particular emphasis is placed on the challenges of interfacial bonding, material compatibility, and the formulation of printable glass systems suitable for co-processing with other materials. The review explores recent strategies for enabling multifunctional, integrated architectures that combine optical, structural, or chemical functionalities within a single component. By synthesising current advances and outlining key research gaps, this work aims to accelerate the development and broader adoption of MMGAM technologies.
- 11 February 2026
- Published by Springer Nature in Progress in Additive Manufacturing
- Vol. 11 (4) , 3655-3675
Open AccessMulti-material glass additive manufacturing: a review of materials, techniques, and integration challenges
Glass offers unique advantages such as high optical transparency, thermal stability, and chemical resistance, making it indispensable in optics, microelectronics, sensing, and biomedical applications. However, its high melting point, brittle nature, and incompatibility with traditional manufacturing methods present significant fabrication challenges. Additive manufacturing (AM) introduces new possibilities for the glass industry by enabling the fabrication of customised, complex 3D structures and the integration of glass with other compatible materials. In particular, multi-material glass additive manufacturing (MMGAM) has emerged as a promising frontier, enabling both the spatial tuning of glass composition, dopants, and functionalities, as well as the co-fabrication of glass with dissimilar materials, such as polymers, metals, or ceramics, within a single component using integrated AM platforms. This paper provides a comprehensive overview of the current state of MMGAM, structured around four key themes: (i) key material properties and interfacial compatibility considerations, (ii) AM techniques adapted for multi-material glass systems, (iii) material combinations and strategies for functional integration, and (iv) future challenges and research directions. Particular emphasis is placed on the challenges of interfacial bonding, material compatibility, and the formulation of printable glass systems suitable for co-processing with other materials. The review explores recent strategies for enabling multifunctional, integrated architectures that combine optical, structural, or chemical functionalities within a single component. By synthesising current advances and outlining key research gaps, this work aims to accelerate the development and broader adoption of MMGAM technologies.
- Open Access
- 23 April 2025
- Published by Wiley in Propellants, Explosives, Pyrotechnics
- Vol. 50 (6)
Metal Oxides and Dichromate Salts Application as Burning Catalysts for the Modern Aluminized Ammonium Nitrate–Based Solid Propellants
This study is devoted to the investigation of combustion characteristics of aluminized solid propellants (SPs) with ammonium nitrate (SP4, 44 wt.% and SP5, 66 wt.%), ammonium perchlorate (5 wt.%), and inert (butyl rubber) and active (polyvinyl tetrazole) binders. The experimental SP formulations were compared with their analogs, both with and without ammonium nitrate included in their compositions. Among ammonium nitrate–contained SPs, the following row of burning rates was found (ammonium nitrate content in brackets, wt.%): SP3 (0) > SP2 (44) ∼ SP4 (44) > SP1 (51) > SP5 (66).The studied SPs were modified by additives of micron‐sized oxide powders (Co3O4, V2O5, MnO2, Fe2O3, CuO) and bichromate salts (K2Cr2O7, Na2Cr2O7, (NH4)2Cr2O7) or potassium bichromate in combination with the second salt of different origin: oxalates (NH4)2C2O4, La2(C2O4)3, and Na2C2O4 and chlorides NaCl, KCl, and BaCl2.Micron‐sized oxide powders were added into the formulation SP4 with 44 wt.% of ammonium nitrate. It was found that there was a 20–30% improvement in the burning rate. CuO exhibited the most pronounced catalytic effect, increasing the burning rate by up to 270% compared to the SPs without additives. K2Cr2O7 was the effective combustion modifier for ammonium nitrate–based SPs, enhancing the burning rate by up to 100% in the pressure range above 4 MPa. The addition of BaCl2 and La2(C2O4)3 in the pressure range from 2 to 5 MPa had a promoting effect on K2Cr2O7.The studied salt mixtures based on K2Cr2O7 were found to be effective catalysts for AN‐based SP combustion.
- 23 April 2025
- Published by Wiley in Propellants, Explosives, Pyrotechnics
- Vol. 50 (6)
Open AccessMetal Oxides and Dichromate Salts Application as Burning Catalysts for the Modern Aluminized Ammonium Nitrate–Based Solid Propellants
This study is devoted to the investigation of combustion characteristics of aluminized solid propellants (SPs) with ammonium nitrate (SP4, 44 wt.% and SP5, 66 wt.%), ammonium perchlorate (5 wt.%), and inert (butyl rubber) and active (polyvinyl tetrazole) binders. The experimental SP formulations were compared with their analogs, both with and without ammonium nitrate included in their compositions. Among ammonium nitrate–contained SPs, the following row of burning rates was found (ammonium nitrate content in brackets, wt.%): SP3 (0) > SP2 (44) ∼ SP4 (44) > SP1 (51) > SP5 (66).The studied SPs were modified by additives of micron‐sized oxide powders (Co3O4, V2O5, MnO2, Fe2O3, CuO) and bichromate salts (K2Cr2O7, Na2Cr2O7, (NH4)2Cr2O7) or potassium bichromate in combination with the second salt of different origin: oxalates (NH4)2C2O4, La2(C2O4)3, and Na2C2O4 and chlorides NaCl, KCl, and BaCl2.Micron‐sized oxide powders were added into the formulation SP4 with 44 wt.% of ammonium nitrate. It was found that there was a 20–30% improvement in the burning rate. CuO exhibited the most pronounced catalytic effect, increasing the burning rate by up to 270% compared to the SPs without additives. K2Cr2O7 was the effective combustion modifier for ammonium nitrate–based SPs, enhancing the burning rate by up to 100% in the pressure range above 4 MPa. The addition of BaCl2 and La2(C2O4)3 in the pressure range from 2 to 5 MPa had a promoting effect on K2Cr2O7.The studied salt mixtures based on K2Cr2O7 were found to be effective catalysts for AN‐based SP combustion.
- Open Access
- 18 April 2025
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 9 (4) , 135
Effect of Varying Layer Thickness by Interlayer Machining on Microstructure and Mechanical Properties in Wire Arc Additive Manufacturing
This study investigates the influence of varying layer thickness through interlayer machining in Wire Arc Additive Manufacturing (WAAM) and its impact on microstructural evolution, mechanical properties, and residual stress distribution. It compares four types of WAAM samples: As-built with uneven layer thickness without interlayer machining and uniform layer thicknesses of 2 mm, 1.5 mm, and 1 mm achieved through interlayer machining. As-built components exhibited coarse columnar grains and uneven deposition, adversely affecting hardness and strength. Interlayer machining at reduced layer thickness refined grains, restricted growth, and induced plastic deformation, leading to enhanced mechanical properties. Grain refinement achieved reductions of 62.7% (top), 77.6% (middle), and 64.3% (bottom), significantly improving microstructural uniformity. Microhardness increased from 150 to 180 HV (as-built) to 210 to 230 HV (machined to maintain 1 mm layer thickness), marking a 40–43% improvement. Tensile strength was enhanced, with UTS increasing from 494.72 MPa to 582.11 MPa (17.6%) and YS from 371 MPa to 471 MPa (26.9%), although elongation decreased from 59% to 46% (22% reduction). Residual stress was reduced by 55–60%, improving structural integrity. These findings highlight interlayer machining as a key strategy for optimizing WAAM-fabricated components while balancing mechanical performance and manufacturing efficiency.
- 18 April 2025
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 9 (4) , 135
Open AccessEffect of Varying Layer Thickness by Interlayer Machining on Microstructure and Mechanical Properties in Wire Arc Additive Manufacturing
This study investigates the influence of varying layer thickness through interlayer machining in Wire Arc Additive Manufacturing (WAAM) and its impact on microstructural evolution, mechanical properties, and residual stress distribution. It compares four types of WAAM samples: As-built with uneven layer thickness without interlayer machining and uniform layer thicknesses of 2 mm, 1.5 mm, and 1 mm achieved through interlayer machining. As-built components exhibited coarse columnar grains and uneven deposition, adversely affecting hardness and strength. Interlayer machining at reduced layer thickness refined grains, restricted growth, and induced plastic deformation, leading to enhanced mechanical properties. Grain refinement achieved reductions of 62.7% (top), 77.6% (middle), and 64.3% (bottom), significantly improving microstructural uniformity. Microhardness increased from 150 to 180 HV (as-built) to 210 to 230 HV (machined to maintain 1 mm layer thickness), marking a 40–43% improvement. Tensile strength was enhanced, with UTS increasing from 494.72 MPa to 582.11 MPa (17.6%) and YS from 371 MPa to 471 MPa (26.9%), although elongation decreased from 59% to 46% (22% reduction). Residual stress was reduced by 55–60%, improving structural integrity. These findings highlight interlayer machining as a key strategy for optimizing WAAM-fabricated components while balancing mechanical performance and manufacturing efficiency.
- Open Access
- 10 March 2025
- Published by MDPI AG in Preprints.org
Effect of Varying Layer Thickness by Interlayer Machining on Microstructure and Mechanical Properties in Wire Arc Additive Manufacturing
This study focuses on how varying layer thickness by interlayer machining affects microstructure refinement, mechanical properties, and residual stresses of Wire Arc Additive Manufacturing (WAAM) components. It compares four types of WAAM samples: As built with uneven layer thickness without interlayer machining and uniform layer thicknesses of 2mm, 1.5mm, and 1mm achieved through interlayer machining. It reveals that the machining force reduces grain size and residual stress in WAAM components. Moreover, uniform and smaller layer thickness enhances inter-layer bonding, improving mechanical properties but increases the build time with more layers of deposition.
- 10 March 2025
- Published by MDPI AG in Preprints.org
Open AccessEffect of Varying Layer Thickness by Interlayer Machining on Microstructure and Mechanical Properties in Wire Arc Additive Manufacturing
This study focuses on how varying layer thickness by interlayer machining affects microstructure refinement, mechanical properties, and residual stresses of Wire Arc Additive Manufacturing (WAAM) components. It compares four types of WAAM samples: As built with uneven layer thickness without interlayer machining and uniform layer thicknesses of 2mm, 1.5mm, and 1mm achieved through interlayer machining. It reveals that the machining force reduces grain size and residual stress in WAAM components. Moreover, uniform and smaller layer thickness enhances inter-layer bonding, improving mechanical properties but increases the build time with more layers of deposition.
- Open Access
Hybridization in Metal Wire Additive Manufacturing: A Case Study of an Impeller
Additive manufacturing (AM) has evolved to enable the direct production of functional components through the hybridization of additive and subtractive processes. In metal wire AM, hybridization is key, encompassing process integration (addition/subtraction), energy source combinations (arc/laser), kinematic options (3/4/5 axis), and slicing techniques (planar/conformal). This paper focuses on these hybridization methods, with a unified system designed for single-machine setups, improving efficiency and accuracy. This study presents a detailed exploration of these hybridization levels through the fabrication of a complex 5-axis geometry—an impeller. The impeller was manufactured with hybridization using various levels and subsequently compared with manufacturing processes like additive manufacturing with interlayer machining and traditional machining methods. The hybrid approach significantly reduced the manufacturing time for the selected impeller geometry from 3536 min to 792 min (saving 77.6% manufacturing time) and minimized material waste to 9.3%, compared with 74.07% in traditional machining. This demonstrates a more efficient, precise, and cost-effective method to optimize metal wire AM for producing complex metal components, advancing capabilities and applications.
Open AccessHybridization in Metal Wire Additive Manufacturing: A Case Study of an Impeller
Additive manufacturing (AM) has evolved to enable the direct production of functional components through the hybridization of additive and subtractive processes. In metal wire AM, hybridization is key, encompassing process integration (addition/subtraction), energy source combinations (arc/laser), kinematic options (3/4/5 axis), and slicing techniques (planar/conformal). This paper focuses on these hybridization methods, with a unified system designed for single-machine setups, improving efficiency and accuracy. This study presents a detailed exploration of these hybridization levels through the fabrication of a complex 5-axis geometry—an impeller. The impeller was manufactured with hybridization using various levels and subsequently compared with manufacturing processes like additive manufacturing with interlayer machining and traditional machining methods. The hybrid approach significantly reduced the manufacturing time for the selected impeller geometry from 3536 min to 792 min (saving 77.6% manufacturing time) and minimized material waste to 9.3%, compared with 74.07% in traditional machining. This demonstrates a more efficient, precise, and cost-effective method to optimize metal wire AM for producing complex metal components, advancing capabilities and applications.
- Open Access
- 25 December 2024
- Published by MDPI AG in Preprints.org
Hybridization in Metal-Wire Additive Manufacturing: A Case Study of an Impeller
Rapid prototyping has advanced into additive manufacturing (AM), enabling direct production of functional components through a hybrid approach combining additive and subtractive processes. In metal-wire AM, arc and laser energy sources are common, with geometry complexity influencing kinematic choices (3/4/5 axis) and necessitating tailored slicing techniques. Whereas this paper explores various levels of hybridization, essential for creating functional components using the metal-wire AM process. These levels encompass process hybridization (addition/subtraction), energy source hybridization (arc/laser), kinematics hybridization (3/4/5 axis), and slicing technique hybridization (planar/conformal). A unified system was designed to accommodate all levels of hybridization on a single machine with a single setup that minimizes the time and improves accuracy. The study presents a detailed exploration of these hybridization levels through the fabrication of a complex 5-axis geometry—an impeller. The impeller was manufactured with hybridization using various levels and subsequently compared with manufacturing processes like additive manufacturing with interlayer machining and traditional machining methods. The hybrid approach significantly reduced the manufacturing time for the selected impeller geometry from 3536 minutes to 792 minutes (saving 77.6% manufacturing time) and minimized material waste to 9.3%, compared to 74.07% in traditional machining. This demonstrates a more efficient, precise, and cost-effective method for producing complex metal components. Furthermore, it offers critical insights into the effectiveness of this hybrid method by optimizing metal-wire AM processes for intricate geometries, thereby advancing the capabilities and applications of metal-wire AM technology.
- 25 December 2024
- Published by MDPI AG in Preprints.org
Open AccessHybridization in Metal-Wire Additive Manufacturing: A Case Study of an Impeller
Rapid prototyping has advanced into additive manufacturing (AM), enabling direct production of functional components through a hybrid approach combining additive and subtractive processes. In metal-wire AM, arc and laser energy sources are common, with geometry complexity influencing kinematic choices (3/4/5 axis) and necessitating tailored slicing techniques. Whereas this paper explores various levels of hybridization, essential for creating functional components using the metal-wire AM process. These levels encompass process hybridization (addition/subtraction), energy source hybridization (arc/laser), kinematics hybridization (3/4/5 axis), and slicing technique hybridization (planar/conformal). A unified system was designed to accommodate all levels of hybridization on a single machine with a single setup that minimizes the time and improves accuracy. The study presents a detailed exploration of these hybridization levels through the fabrication of a complex 5-axis geometry—an impeller. The impeller was manufactured with hybridization using various levels and subsequently compared with manufacturing processes like additive manufacturing with interlayer machining and traditional machining methods. The hybrid approach significantly reduced the manufacturing time for the selected impeller geometry from 3536 minutes to 792 minutes (saving 77.6% manufacturing time) and minimized material waste to 9.3%, compared to 74.07% in traditional machining. This demonstrates a more efficient, precise, and cost-effective method for producing complex metal components. Furthermore, it offers critical insights into the effectiveness of this hybrid method by optimizing metal-wire AM processes for intricate geometries, thereby advancing the capabilities and applications of metal-wire AM technology.
- 15 October 2024
- Published by IOP Publishing in Engineering Research Express
- Vol. 6 (4) , 045404
Drilling parameter optimisation for three-dimensional prints of acrylonitrile butadiene styrene
Over the past decade, additive manufacturing has transformed the industry, leading to a range of innovative products. In this study, the acrylonitrile butadiene styrene specimen was produced using the fused deposition modeling process. To assess the effectiveness of additive manufacturing parts in final product development, it’s crucial to establish the optimal drilling process parameters to minimize thrust force and torque. The investigation utilized two different drill geometries. Drilling with an end mill resulted in a 24.22% reduction in thrust force and a 12.37% decrease in torque compared to using a twist drill. Additionally, factors such as orientation, infill density, feed rate, and drill geometry have a significant impact on drilling forces.
- 15 October 2024
- Published by IOP Publishing in Engineering Research Express
- Vol. 6 (4) , 045404
Drilling parameter optimisation for three-dimensional prints of acrylonitrile butadiene styrene
Over the past decade, additive manufacturing has transformed the industry, leading to a range of innovative products. In this study, the acrylonitrile butadiene styrene specimen was produced using the fused deposition modeling process. To assess the effectiveness of additive manufacturing parts in final product development, it’s crucial to establish the optimal drilling process parameters to minimize thrust force and torque. The investigation utilized two different drill geometries. Drilling with an end mill resulted in a 24.22% reduction in thrust force and a 12.37% decrease in torque compared to using a twist drill. Additionally, factors such as orientation, infill density, feed rate, and drill geometry have a significant impact on drilling forces.
- Open Access
- 10 October 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (20) , 9188
Study of Various Process Parameters on Bead Penetration and Porosity in Wire Arc Additive Manufacturing (WAAM) of Copper Alloy Cu1897
Copper-based alloys are widely known for their high thermal and electrical conductivity. Although the use of these alloys in powder-based additive manufacturing (AM) shows significant promise, applying this method in wire arc additive manufacturing (WAAM) processes poses various considerable challenges, including porosity, delamination, surface oxidation, etc. The limited research on WAAM of copper alloys, especially Cu1897, highlights the need for a more in-depth investigation. This study addresses the effects of process parameters in pulse cold metal transfer (CMT)-based WAAM of Cu1897, i.e., pulse correction (PC) and arc length correction (ALC), on bead penetration and porosity. The results showed that as PC was increased from −5 to +5, weld bead penetration increased from 2.38 mm to 3.87 mm. To further enhance penetration and reduce the porosity, the ALC was varied from +30% to −30% with a step size of 15%. The results showed that weld bead penetration increased to 4.47 mm by altering the ALC from +30% to −30%. Additionally, as the ALC varied within this range, porosity decreased significantly from 3.98% to 0.28%. Overall, it is concluded that a lower value of ALC is recommended to improve bead penetration and reduce porosity in WAAM of Cu1897.
- 10 October 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (20) , 9188
Open AccessStudy of Various Process Parameters on Bead Penetration and Porosity in Wire Arc Additive Manufacturing (WAAM) of Copper Alloy Cu1897
Copper-based alloys are widely known for their high thermal and electrical conductivity. Although the use of these alloys in powder-based additive manufacturing (AM) shows significant promise, applying this method in wire arc additive manufacturing (WAAM) processes poses various considerable challenges, including porosity, delamination, surface oxidation, etc. The limited research on WAAM of copper alloys, especially Cu1897, highlights the need for a more in-depth investigation. This study addresses the effects of process parameters in pulse cold metal transfer (CMT)-based WAAM of Cu1897, i.e., pulse correction (PC) and arc length correction (ALC), on bead penetration and porosity. The results showed that as PC was increased from −5 to +5, weld bead penetration increased from 2.38 mm to 3.87 mm. To further enhance penetration and reduce the porosity, the ALC was varied from +30% to −30% with a step size of 15%. The results showed that weld bead penetration increased to 4.47 mm by altering the ALC from +30% to −30%. Additionally, as the ALC varied within this range, porosity decreased significantly from 3.98% to 0.28%. Overall, it is concluded that a lower value of ALC is recommended to improve bead penetration and reduce porosity in WAAM of Cu1897.
- 6 February 2024
- Published by SAGE Publications in Journal of Micromanufacturing
- Vol. 7 (1) , 90-96
Process parametric optimization of fused deposition modeling for manufacturing of acrylonitrile butadiene styrene parts
Additive manufacturing has been a revolution in the last decade and has led to a number of product innovations. Rapid prototyping (RP) has significantly reduced the product development cycle time and RP techniques are now replacing many conventional plastic processing techniques where production volume is not an issue. In order to ascertain the utility of additive manufacturing techniques for the development of fully functional parts, it’s important to establish the optimal set of process parameters for achieving maximum mechanical performance. In the current experimental investigation, the dogbone-shaped parts of acrylonitrile butadiene styrene (ABS) were fabricated by the fused deposition modeling (FDM) process. The process parameters were optimized for dogbone-shaped specimens fabricated by the FDM process. Among the parameters, it has been found that orientation and infill density are the most dominant factors affecting the tensile strength of FDM parts printed with ABS material.
- 6 February 2024
- Published by SAGE Publications in Journal of Micromanufacturing
- Vol. 7 (1) , 90-96
Process parametric optimization of fused deposition modeling for manufacturing of acrylonitrile butadiene styrene parts
Additive manufacturing has been a revolution in the last decade and has led to a number of product innovations. Rapid prototyping (RP) has significantly reduced the product development cycle time and RP techniques are now replacing many conventional plastic processing techniques where production volume is not an issue. In order to ascertain the utility of additive manufacturing techniques for the development of fully functional parts, it’s important to establish the optimal set of process parameters for achieving maximum mechanical performance. In the current experimental investigation, the dogbone-shaped parts of acrylonitrile butadiene styrene (ABS) were fabricated by the fused deposition modeling (FDM) process. The process parameters were optimized for dogbone-shaped specimens fabricated by the FDM process. Among the parameters, it has been found that orientation and infill density are the most dominant factors affecting the tensile strength of FDM parts printed with ABS material.