DDDam-Bé Lardja Douti

Dam-Bé Lardja Douti

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Dam-Bé Lardja Douti has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Sensitive Detection of Abamectin and Acetamiprid by Dual-Wavelength Photothermal Lens Spectroscopy

    by Komna Fata, Komlan Segbéya Gadejisso-Tossou, Dam-Bé Lardja Douti, Kosi Mawuéna Novidzro, Kodjo Djidjolé Etse, Ayayi Claude Ahyi, Humberto Cabrera

    Contamination of water resources by pesticide residues represents a major environmental challenge, requiring the development of sensitive, rapid, and reliable analytical methods for their detection and quantification. In this work, we evaluated the performance of Photothermal Lens (PTL) spectroscopy for the detection and quantification of two widely used agricultural pesticides, abamectin and acetamiprid, dissolved in ethanol. Measurements were performed at two excitation wavelengths, 400 nm and 532 nm. The two compounds were first characterized by Fourier Transform Infrared (FTIR) spectroscopy to confirm their main functional groups. UV-Visible spectroscopy was then used to identify their absorption bands and compare its performance with that of PTL spectroscopy. Our results show that, despite their very low absorption in the visible region, both pesticides can be detected at nanomolar concentrations using PTL spectroscopy. absorption coefficients exhibited a linear dependence on concentration, with the calibration curves showing coefficients of determination (R2) ranging from 0.94 to 0.99. The limits of detection (LOD) and quantification (LOQ) values for abamectin were 0.16 and 0.53 nM, respectively, at 400 nm, and 0.36 and 1.18 nM, respectively, at 532 nm. For acetamiprid, the corresponding LOD and LOQ values were 0.04 and 0.13 nM, respectively, at 400 nm, and 0.41 and 1.38 nM, respectively, at 532 nm. These results demonstrate the potential of the PTL spectroscopy as a promising method for detecting and quantifying trace levels of pesticides in liquid media in the visible range. Further validation in real and spiked environmental water samples is required before direct application to environmental monitoring.

  • Open Access

    Automated Malaria Parasitemia Assessment from Blood Smears Using a Hybrid Deep Learning and Image Analysis Framework

    by Sena Apeke, Dam-Bé Lardja Douti, Edoh Katchekpele

    Malaria remains a major public health problem, particularly in sub-Saharan Africa, where microscopic diagnosis using blood smears remains the gold standard. However, this approach relies heavily on the expertise of laboratory technicians and can lead to variability in interpretation. In this study, we propose a hybrid artificial intelligence approach aimed at automatically calculating an image score based on images of blood smears. The methodology developed combines automatic segmentation of red blood cells, a convolutional neural network (CNN) for detecting infected cells, a multiscale texture analysis based on wavelets, and an anomaly detection module inspired by Denoising Diffusion Probabilistic Models (DDPM). The experiments were conducted using the public NIH Malaria Cell Images Dataset and BBBC041 datasets. The CNN classifier achieved an accuracy of 98.47%, an F1-score of 98.47%, an AUROC of 0.9988, and an AUPRC of 0.9989. Analysis of 1,328 blood smears yielded an average image score of 0.473, associated with an average parasitemia of 26.25%. The ablation study confirmed the complementary contribution of the wavelet and DDPM components, while machine learning of the weights showed that parasitic density is the most informative variable, with an importance of 72.09%. These results demonstrate the potential of the proposed approach for the development of intelligent systems to aid in the diagnosis and quantitative monitoring of malaria.

  • Tenue au flux et physique de l'interaction laser/matière dans les couches minces optiques en régime sub-picoseconde

    by Dam-Bé Lardja Douti

    La tenue au flux des traitements de surfaces optiques constitue aujourd'hui un enjeu majeur pour le développement des lasers de puissance à courtes durées d'impulsion. L’étude des interactions laser-matière en régime sub-picoseconde a montré que l’initiation de l'endommagement laser est le résultat de processus d’excitation fortement non-linéaires (photoionisation, ionisation par impact et avalanche électronique). Dans cette thèse, un dispositif de tests multiparamétriques a été développé pour l’étude de la tenue au flux des composants optiques. Différentes études expérimentales ont été menées sur des matériaux diélectriques, en couche mince ou en matériau massif, afin d’apporter des données nouvelles sur les matériaux couches minces assez peu étudiés dans la littérature. L’étude de l’influence de la longueur d’onde a révélé différentes phases de prédominance des processus d’ionisation. L’influence du nombre de tirs à différentes longueurs d’ondes aussi a été étudiée, en considérant différentes techniques de dépôt de couches minces. L’interprétation de ces résultats expérimentaux est soutenue par un modèle de simulation numérique que nous présentons en détail dans le manuscrit. Une place, non moins importante, a été accordée dans notre travail à la métrologie de l’endommagement. Nous avons proposé et appliqué l’utilisation d’un dispositif original de mesure quantitative de phase pour l’analyse des processus d’endommagement. Et pour terminer nous avons développé un système de microscopie pompe-sonde afin de pousser les investigations sur les processus en jeu lors de l’interaction laser-matière en régime sub-picoseconde.

  • Open Access

    A Vector Space Model Based Algorithm for Element Identification in Laser Induced Breakdown Spectroscopy Spectra

    by Dam-Bé Douti, Kossi Amouzouvi

    Laser-Induced Breakdown Spectroscopy (LIBS) has gained interest among analytical techniques the last few years, thanks to its relative simplicity of use: generate compositional information from a material with minimal sample preparation. However, accurate recognition of chemical species in complex mixtures typically requires expert interpretation or extensive calibration datasets, and usually can only be performed on selected chemical elements. To mitigate these limitations and enhance the analytical capability of LIBS, we propose a novel vector space model coupled with singular value decomposition (SVD) and demonstrate its potential for both qualitative and quantitative LIBS analysis. In this vector space based algorithm, each chemical element is encoded as a unit vector; the complete set of unit vectors constitutes a basis that spans the spectral space of any unknown sample. Synthetic spectra generated from the LIBS spectra database of the National Institute of Standards and Technology is used to construct a database of 16 elements and assess the relevance of our approach in the identification and quantification of alloys in LIBS spectra. The algorithm reliably identified all elemental components and estimated their proportions; quantitative precision was highest for simpler binary alloys and decreased with compositional complexity. This approach provides a promising foundation for automated and calibration-light LIBS analysis. The limits of this approach are also discussed and some ideas for improvement are proposed.

  • Scintillators and Photodetectors

    by Ram Gopal, Krishan Gopal, Ravi P. N. Tripathi, Dam-Bé L. Douti

  • Open Access

    FriiTriga, a triggered controller with an optical beam shutter using a hard disk drive voice-coil actuator

    by Dam-Bé L. Douti, Chérif Ouro-Wassara, Essohana Mabafei


  • Open Access

    Thermal simulation and optimization of a Curie-based thermomagnetic motor harnessing concentrated solar energy

    by Serge Dzo Mawuefa Afenyiveh, Assiongbon Adanlete Adjanoh, Dam-Bé Lardja Douti, Tchilabalo Pakam

    This work reports on a numerical study of a thermomagnetic motor with the active material being a Nickel (Ni) plate using the Curie effect. The main goal is to use thermal simulation and parameter optimization to increase the motor’s efficiency. With respect to beam width, heat exposure duration, and rotation frequency, the study focuses on multiparametric simulations of a thermomagnetic wheel exposed to a concentrated sun beam. An efficient configuration for real-world application is found using the finite element-based computational tool COMSOL Multiphysics. The outcomes show that, when taking into account n = 5 cycles, the ideal configuration displays parameter settings with the lowest quadratic deviation around the Curie temperature during the thermal excitation process and the lowest quadratic deviation around the ambient temperature during the thermal relaxation process. Furthermore, a cooling method is presented, which includes supporting the active material with an Aluminum (Al) heat sink. In order to speed up the remagnetization of the Curie wheel, this method seeks to decrease heat accumulation and regulate the deposited thermal flux on the Ni plate. We also found that the reduction in quadratic deviation is most pronounced between zAl = 1 mm and zAl = 2 mm. At zAl = 10 mm, the quadratic deviation achieves its lowest value (σθmin=5.65K) at the end of the thermal relaxation process. The results of this study will forward the design of a high-performance thermomagnetic motor for mechanical and electrical applications.


  • Analysis of energy deposition and damage mechanisms in single layer optical thin films irradiated by IR and UV femtosecond pulses

    by Dam Be L Douti, Laurent Gallais, Christophe Hecquet, Thomas Begou, Julien Lumeau, Mireille Commandre