Lanbin Yang
Research Subjects
Lanbin Yang has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Ming Chen
National Engineering Research Center for Inland Waterway Regulation, Chongqing Jiaotong University 1 , Chongqing 400074
4 shared publications - Haijin Huang3 shared publications
- Xusheng Zhou
Key Laboratory of Hydraulic and Waterway Engineering of the Ministry of Education, Chongqing Jiaotong University, Chongqing 400074, China
3 shared publications - Peng Jiang2 shared publications
Duoyin Wang
1 shared publicationHaijin Huang
1 shared publication
Latest Publications
- 1 June 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (6)
Turbulent structures in offset-jet shear layers using large-eddy simulation
This study employs large-eddy simulation to investigate turbulent structures of a planar offset jet characterized by an offset ratio of 5 and a Reynolds number of 7500. A combined diagnostic methodology based on proper orthogonal decomposition (POD), quadrant analysis, and vortex-core-based conditional averaging is used to examine the spatial properties of ejection and sweep events, their contributions to Reynolds shear stress, and their relationship with vortex structures in the present case. POD results reveal that, across most shear layers, the energy-containing and large-scale structures predominantly exhibit extensive ejection or sweep events. Quadrant analysis shows a clear mismatch between the occurrence frequency of ejection and sweep events and their contributions to Reynolds shear stress in the outer shear layers of the pre-attachment and wall jet regions: the more frequently occurring event type does not necessarily make the larger contribution to Reynolds shear stress. However, this mismatch becomes weaker in the inner shear layer of the pre-attachment region, under the influence of the recirculation region, and is largely suppressed in the inner shear layer of the wall jet region, due to the strong near-wall confinement. The vortex-core-based conditional statistics further indicate that the observed frequency-contribution mismatch stems from an imbalance in intensity between vortex-induced ejection and sweep events. The present study, through a combined diagnostic methodology, further deepens the understanding of turbulent structures and the generation mechanisms of Reynolds shear stress within offset-jet shear layers, providing a theoretical reference for understanding pollutant transport, diffusion, and desalination processes under such flow conditions.
- 1 June 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (6)
Turbulent structures in offset-jet shear layers using large-eddy simulation
This study employs large-eddy simulation to investigate turbulent structures of a planar offset jet characterized by an offset ratio of 5 and a Reynolds number of 7500. A combined diagnostic methodology based on proper orthogonal decomposition (POD), quadrant analysis, and vortex-core-based conditional averaging is used to examine the spatial properties of ejection and sweep events, their contributions to Reynolds shear stress, and their relationship with vortex structures in the present case. POD results reveal that, across most shear layers, the energy-containing and large-scale structures predominantly exhibit extensive ejection or sweep events. Quadrant analysis shows a clear mismatch between the occurrence frequency of ejection and sweep events and their contributions to Reynolds shear stress in the outer shear layers of the pre-attachment and wall jet regions: the more frequently occurring event type does not necessarily make the larger contribution to Reynolds shear stress. However, this mismatch becomes weaker in the inner shear layer of the pre-attachment region, under the influence of the recirculation region, and is largely suppressed in the inner shear layer of the wall jet region, due to the strong near-wall confinement. The vortex-core-based conditional statistics further indicate that the observed frequency-contribution mismatch stems from an imbalance in intensity between vortex-induced ejection and sweep events. The present study, through a combined diagnostic methodology, further deepens the understanding of turbulent structures and the generation mechanisms of Reynolds shear stress within offset-jet shear layers, providing a theoretical reference for understanding pollutant transport, diffusion, and desalination processes under such flow conditions.
- 1 February 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (2)
Flow characteristics of a three-dimensional wall jet strongly confined by a vertical baffle
To examine the flow characteristics of a three-dimensional wall jet strongly confined by a vertical baffle, flow field measurements were performed on the horizontal and vertical planes crossing the nozzle center using a two-dimensional particle image velocimetry system. The experiment considered four Reynolds numbers: 5084, 8179, 11 052, and 13 926, with a fixed nozzle-to-baffle spacing of 2 d (where d is the nozzle diameter). The results show that the upward and corner wall jets are formed after the three-dimensional wall jet impinges on the vertical baffle. Due to the influence of the recirculation structure on the upward wall jet, it decays more rapidly in the maximum velocity than the corner wall jet. At the same Reynolds number, the jet spreading rates of both jets are comparable. Self-similarity is observed in the normalized time-averaged velocity and Reynolds stress profiles using their half-widths and local maxima values, and their scaling laws are obtained. Two-point spatial correlation and proper orthogonal decomposition analyses reveal that the turbulent structures in the corner wall jet possess lower energy and smaller scales compared to those in the upward wall jet. This study is the first to reveal detailed flow characteristics of the three-dimensional wall jet extremely constrained by a vertical baffle. The findings offer valuable insights for informing the design of engineering structures with complex flow configurations.
- 1 February 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (2)
Flow characteristics of a three-dimensional wall jet strongly confined by a vertical baffle
To examine the flow characteristics of a three-dimensional wall jet strongly confined by a vertical baffle, flow field measurements were performed on the horizontal and vertical planes crossing the nozzle center using a two-dimensional particle image velocimetry system. The experiment considered four Reynolds numbers: 5084, 8179, 11 052, and 13 926, with a fixed nozzle-to-baffle spacing of 2 d (where d is the nozzle diameter). The results show that the upward and corner wall jets are formed after the three-dimensional wall jet impinges on the vertical baffle. Due to the influence of the recirculation structure on the upward wall jet, it decays more rapidly in the maximum velocity than the corner wall jet. At the same Reynolds number, the jet spreading rates of both jets are comparable. Self-similarity is observed in the normalized time-averaged velocity and Reynolds stress profiles using their half-widths and local maxima values, and their scaling laws are obtained. Two-point spatial correlation and proper orthogonal decomposition analyses reveal that the turbulent structures in the corner wall jet possess lower energy and smaller scales compared to those in the upward wall jet. This study is the first to reveal detailed flow characteristics of the three-dimensional wall jet extremely constrained by a vertical baffle. The findings offer valuable insights for informing the design of engineering structures with complex flow configurations.
- 22 September 2025
- Published by Elsevier in Ocean Engineering
- Vol. 342
Entrainment mechanism in a turbulent offset jet
- 22 September 2025
- Published by Elsevier in Ocean Engineering
- Vol. 342
Entrainment mechanism in a turbulent offset jet
- Open Access
- 1 February 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (2)
Flow characteristics in a semi-confined circular-pipe impinging jet
The impinging jet is a complex heat and mass transfer technique that involves several process variables, such as the jet Reynolds number, impingement distance, and jet configuration. In this study, the flow characteristics of a semi-confined circular-pipe impinging jet over different Reynolds numbers and impingement distances were experimentally investigated using a two-dimensional particle image velocimetry technique. The confinement was achieved by positioning a plate parallel to the impinging plate at the nozzle exit. The time-averaged velocity field exhibited a recirculation structure that gradually shifted downstream with increasing Reynolds numbers or impingement distances. Notably, at H/d = 2, this downstream shift of the structure was accompanied by an increase in the vortex intensity. Moreover, the confined plate induced alterations in the overall flow pattern within the confined region, significantly reducing the wall jet decay rate compared with both unconfined and confined radial wall jets for H/d ≥ 3. Conversely, the confinement did not affect the expansion of the wall jet. Unlike the free (unconfined) impinging jets, the semi-confined circular-pipe impinging jet did not exhibit self-similar behavior in the conventional outer-scaled coordinates, particularly concerning the turbulence intensity and Reynolds shear stress. Finally, self-similarity in the time-averaged velocity and various turbulence parameters was achieved using the parameter scale proposed in this study, thereby obtaining the corresponding scaling laws in the wall jet region. Our study results can deepen the current understanding of the flow characteristics of semi-confined circular-pipe impinging jets and are significant for optimizing the performance and efficiency of compact electronic packaging equipment.
- 1 February 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (2)
Open AccessFlow characteristics in a semi-confined circular-pipe impinging jet
The impinging jet is a complex heat and mass transfer technique that involves several process variables, such as the jet Reynolds number, impingement distance, and jet configuration. In this study, the flow characteristics of a semi-confined circular-pipe impinging jet over different Reynolds numbers and impingement distances were experimentally investigated using a two-dimensional particle image velocimetry technique. The confinement was achieved by positioning a plate parallel to the impinging plate at the nozzle exit. The time-averaged velocity field exhibited a recirculation structure that gradually shifted downstream with increasing Reynolds numbers or impingement distances. Notably, at H/d = 2, this downstream shift of the structure was accompanied by an increase in the vortex intensity. Moreover, the confined plate induced alterations in the overall flow pattern within the confined region, significantly reducing the wall jet decay rate compared with both unconfined and confined radial wall jets for H/d ≥ 3. Conversely, the confinement did not affect the expansion of the wall jet. Unlike the free (unconfined) impinging jets, the semi-confined circular-pipe impinging jet did not exhibit self-similar behavior in the conventional outer-scaled coordinates, particularly concerning the turbulence intensity and Reynolds shear stress. Finally, self-similarity in the time-averaged velocity and various turbulence parameters was achieved using the parameter scale proposed in this study, thereby obtaining the corresponding scaling laws in the wall jet region. Our study results can deepen the current understanding of the flow characteristics of semi-confined circular-pipe impinging jets and are significant for optimizing the performance and efficiency of compact electronic packaging equipment.