OLOleksandr S. Liashuk

Oleksandr S. Liashuk

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Oleksandr S. Liashuk has a total of 74 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Synthesis, Physicochemical and Computational Analysis of Tris(fluoromethyl)alkyl Building Blocks

    by Denys Klyukovskiy, Oleksandr S. Liashuk, Mykhailo Redka, Alina T. Bezuhla, Oleksandr P. Blahun, Dmytro Lesyk, Petro Borysko, Anton V. Chernykh, Yurii M. Pustovit, Oleksandr Grygorenko

    A concise and scalable synthesis of tris(fluoromethyl)alkyl-building blocks (including amines, carboxylic acids, alcohols, and bromides) starting from commercially available 3,3-bis(bromomethyl)oxetane. Comprehensive physicochemical profiling of the corresponding amines and carboxylic acids (by measuring their pKa and LogP values), benchmarked against less fluorinated and non-fluorinated counterparts, showed that the tris(fluoromethyl)methyl (beta,beta',beta''-trifluro-tert-butyl, (FCH₂)₃C, TFTB) group mimics the electronic and polarity-modulating properties of CF₃ and CF₃CH₂ substituents despite substantially larger steric volume. Conformational analysis shows that the (FCH₂)₃C group adopts a restricted set of low-energy conformations governed by through-space electrostatic interactions, with C=O···H–C and C–F···H–C contacts playing a crucial stabilizing role. Molecular electrostatic potential analysis rationalizes both the anomalous lipophilicity trends and the CF₃-like polarity modulation of this group. Together, these data confirm the TFTB group as a valuable motif for isosteric replacement in drug design.


  • Open Access

    Deoxyfluorination of Hydroxy-Substituted Boronates

    by Yaroslav Melnyk, Oleksandr S. Liashuk, Oleksandr Horulya, Olexiy D. Kachkovskiy, Oleksandr Grygorenko

    A practical and scalable protocol for the deoxyfluorination of hydroxyalkyl-substituted aryl- and alkenylboronates was developed. The optimized conditions (combining Deoxo-Fluor with TEA·3HF as the reagents and substrate pre-conversion to trifluoroborate salts) enabled efficient transformation across a wide range of (homo)benzylic and allylic alcohols, while tolerating protected carboxyl and amino groups. The resulting fluorinated boronates performed well as versatile building blocks in oxidation and Suzuki cross-coupling reactions. Furthermore, a telescoped one-pot strategy allowed direct utiliza-tion of crude fluorinated intermediates, enabling access to complex molecular frameworks containing alcohol, carbonyl, and ester functionalities, typically intolerant to the late-stage fluorination conditions. This methodology offers a general and efficient route for the incorporation of monofluorinated aliphatic fragments into structures of relevance for medicinal chem-istry and material science.

  • Open Access

    Multigram Synthesis and Physicochemical Evaluation of (Oxa)Azaspiro[2.n]alkane Building Blocks

    by Sergiy Galavskyy, Anton V. Chernykh, Daria S. Klymenko, Oleksandr S. Liashuk, Svetlana V. Shishkina, Dmytro Lesyk, Pavlo Nosyk, Valeriya Makhankova, Petro Borysko, Dmytro M. Volochnyuk, et al.

    An efficient and scalable approach to (oxa)azaspiro[2.n]alkane building blocks has been developed starting from commercially available N-Boc-protected lactams and lactones. Tebbe olefination followed by cyclopropanation as the key step enabled the construction of spirocyclic cores containing five- to seven-membered heterocycles, with scalability demonstrated up to 62 g. Subsequent diastereomeric separation and straightforward functional group interconversions provided a diverse set of derivatives, including carboxylic acids, amines, and gem-difluorinated analogues, thereby extending access to scarcely explored larger-ring scaffolds. Experimental lipophilicity measurements demonstrated that spiro-annelation of gem-diflurocyclopropane ring significantly increased LogP values; the effect was similar to that of CF3 group. Structural characterization by single-crystal X-ray diffraction studies and exit vector plot (EVP) analysis confirmed the three-dimensional architecture of representative compounds and suggested potential applications for isosteric replacements. Together, these results establish a robust platform for the multigram preparation and physicochemical profiling of spirocyclic building blocks of high relevance for medicinal chemistry.

  • Open Access

    Synthesis and Physicochemical Characterization of 5 Trifluoromethyl-Substituted Saturated O- and S-Heterocycles

    by Mykhailo O. Redka, Nazar Dovhaniuk, Oleksandr Blahun, Oleksandr S. Liashuk, Anastasiia M. Hurieva, Dmytro Lesyk, Daniil Skrypnik, Yuliia Holota, Dmytro Durylin, Petro Borysko, et al.

    Fluorinated saturated heterocycles are valuable yet underexplored motifs in drug design. Here we present a scalable strategy for the synthesis of fluorinated tetrahydrofuran (THF) and tetrahydrothiophene (THT) building blocks from simple and readily available starting materials. The optimized conditions enabled access to CF₃-substituted ketones and the corresponding stereodefined alcohol, amine, and amino acid derivatives on decagram scale. Physicochemical profiling established clear structure–property relationships. pKₐ and pI values were affected by strong inductive effects of heteroatoms and SO₂ groups, with CF₃ substitution consistently enhancing the compound’s acidity and lowering isoelectric points. LogP measurements highlighted scaffold- and substituent-dependent lipophilicity, with sulfur-containing motifs being most lipophilic and sulfone derivatives – least. Overall, this work delivers a robust platform for accessing versatile fluorinated building blocks (including noncanonical amino acids) for drug discovery.

  • Open Access

    2-Azabicyclo[3.2.0]heptane as a Bicyclic Isostere for Medicinal Chemistry: Synthesis and Physicochemical Characterization

    by Danylo A. Nosyk, Serhii Yu. Lukyanenko, Dmytro S. Granat, Daniil Skrypnik, Valentyn Chigrinov, Oleksandr S. Liashuk, Svetlana V. Shishkina, Timur Savchenko, Oleksandr O. Yurchenko, Oleksandr O. Grygorenko

    A convenient approach to the synthesis of diastereopure 6- and 2,6-substituted 2-azabicyclo[3.2.0]hexanes is reported. The method is based on the sequential construction of the cyclobutane and pyrrolidine rings of the target bicyclic system via [2 + 2] ketene cycloaddition and lactam formation, respectively. Although the key cycloaddition step had modest stereoselectivity (dr 2:1), the target bicyclic product could be obtained as a pure diastereomer without using chromatographic purification. The reaction sequence commenced from readily available starting materials and was easily scalable (up to 32.8 g). Utility of the synthesized intermediates was demonstrated by the preparation of a series of (monoprotected) exo- and endo-isomeric amino alcohols and diamines – valuable building blocks for drug discovery. Their potential for isosteric replacements was evaluated by measuring physicochemical properties, as well as structural studies and exit vector plot (EVP) analysis.

  • Open Access

    Physicochemical Properties of gem-Difluorinated Saturated Bicyclic Amines – Advanced Building Blocks for Drug Discovery

    by Oleksandr S. Liashuk, Bohdan Moroz, Kostiantyn P. Melnykov, Serhii Holovach, Dmytro Lesyk, Yaroslav Lesyk, Daniil Skrypnik, Yuliia Holota, Petro Borysko, Andrey A. Filatov, et al.

    Impact of gem-difluorination on the physicochemical properties of bicyclic saturated amines with 6 to 8 atoms in the largest ring is discussed. The fluorination effect on the acidity of protonated species (pKa) correlated with intuitive predictions based on the inductive effect of the electron-deficient substituent. In contrast, lipophilicity (LogP) could be either increased or decreased by the gem-difluorination. The observed effect depended on the structure of the bicyclic core and was affected by the spatial orientation of the C−F and neighboring C−H bonds.

  • Open Access

    Multigram Copper-Catalyzed Borylation of Functionalized Terminal Alkynes with B2Pin2

    by Ihor Kleban, Yana Semonchuk, Oleksandr S. Liashuk, Anastasiia M. Hurieva, Yuliia V. Rassukana, Oleksandr O. Grygorenko

    A comprehensive study of the commercially available ligands/additives in the formal copper-catalyzed hydroboration reaction of functionalized terminal alkynes is described. Based on the common reaction system (CuCl − B₂Pin₂), a set of common and inexpensive ligands or additives − namely, rac-BINAP, PPh₃, [(t-Bu)₃PH]BF₄, and LiCl – was tested for its effects on the borylation regioselectivity and overall reaction efficiency. The results observed demonstrated correlation between the substrate nature (propargylic, homopropargylic, or higher homolog) and the ligand, which could be used for the preferential preparation of linear or branched isomer of the target alkenyl boronic species. It was found, that LiCl and (t-Bu)3P could be used for preparation of β-substituted alkenyl boronates, whereas α-substituted isomers were preferentially obtained in the presence of triarylphopsphine ligands. The scope of the transformations covered derivatives of protected (homo)propargylic alcohols and amines and tolerated free alcohol, ether, silyl ether, ketal, ester, and alkene moieties. The practical utility of the discussed methodologies was proven by the multigram preparation of target building blocks (10...100 g for over 20 boronates, up to 300 g – for a few selected representatives).

  • Open Access

    Synthesis and Physicochemical Characterization of 6-Trifluoromethyl Spiro[3.3]heptane Building Blocks

    by Oleksandr S. Olifir, Pavlo R. Lenda, Anton V. Chernykh, Daria Klymenko, Oleksandr S. Liashuk, Svetlana V. Shishkina, Ivan Kondratov, Oleksandr O. Grygorenko

    A practical synthesis of 6-(trifluoromethyl)spiro[3.3]hep¬tane-derived building blocks was developed. Starting from a commercially available cyclobutanone derivative, a key building block – 1,1-bis(bromomethyl)-3-(trifluoromethyl)cyclobutane – was prepa¬red on a 0.5 kg scale in a single run. Further construction of the spiro[3.3]heptane core was achieved via double alkylation of TosMIC or malonate diester on up to 120 g scale. Simple functional group transformation provided access to a wide range of mono- and bifunctional spiro[3.3]heptane-derived building blocks, including alcohols, amines, boronate esters, carboxylic acids, and amino acids on a gram to multigram scale. Physicochemical properties (i.e., acidity pKa and lipophilicity LogP) were experimentally determined and compared to those for non-, mono-, and gem-difluorinated counterparts, as well as cyclohexane and cycloheptane derivatives. Spatial structure of the obtained compounds was evaluated by X-ray diffraction studies and characterized by exit vector plot (EVP) analysis.

  • Open Access

    Synthesis and Physicochemical Properties of Functionalized cis-2-((Fluoro)alkyl)cyclobutanes

    by Anton V. Chernykh, Oleksandr S. Liashuk, Kyrylo O. Kononenko, Artem Y. Michuda, Oleksandr S. Olifir, Dmytro Lesyk, Karina Turenko, Andrii V. Kozytskyi, Svitlana V. Shishkina, Petro Borysko, et al.

    Efficient decagram-scale synthesis of (fluoro)alkyl-containing cis-1,2-disubstited cyclobutane-derived building blocks is described. Starting from commercially available chemicals, target cyclobutylamines, carboxylic acids, and other valuable derivatives were obtained in 3–8 steps on up to 39 g scale. Physicochemical characterization of the prepared compounds and their model derivatives revealed the distinct features of cis-1,2-disubstituted cyclobutanes (namely, significantly lowered lipophilicity) as compared to their previously reported trans-isomeric counterparts. Computational analysis along with experimentally obtained structural properties suggested the decisive influence of the compounds’ conformation on the discussed properties.

  • Open Access

    Copper-mediated C–C Coupling of Alkenyl Boronates and Bromodifluoroacetates

    by Yevhen Yurov, Kamila Laniush, Oleksandr Hryschuk, Oleksandr Liashuk, Oleksandr Grygorenko

    The reaction of alkenyl boronates and bromo-difluoroacetates in the presence of copper powder and TMEDA as the catalytic system was developed. The corresponding C–C coupling products were obtained in 35–93% yield. The method tolerated a variety of functional groups, namely, phenol, (thio)ether, protected amino-, hydroxy-, ketone, and carboxylic acid moieties, as well as various saturated carbo- and heterocycles, and was compatible with multigram scale up (to 76 g). The diastereoselectivity of the process was typically low, so that ca. 1:1 E/Z isomeric mixtures were formed from pure E or Z alkenyl boronates. Further functional group transformations demonstrated the utility of the prepared compounds as valuable building blocks for synthetic and medicinal chemistry. Based on the obtained results and the literature data, a plausible reaction mechanism was proposed involving the formation of radical and organocopper intermediates.