Ignatovich Zhanna Vladimirovna
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ignatovich Zhanna Vladimirovna has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
- Alexander Alexandrovich Rogachev
Institute of Chemistry of New Materials of the National Academy of Sciences of Belarus, Minsk, Belarus
3 shared publications - Anastasia L. Ermolinskaya
Institute of Chemistry of New Materials, National Academy of Sciences of Belarus, Minsk, Belarus
3 shared publications - Elena V. Koroleva
Institute of Chemistry of New Materials, National Academy of Sciences of Belarus, Minsk, Belarus
3 shared publications - Abdumutolib A. Atakhanov
Institute of Polymer Chemistry and Physics, Academy of Sciences of the Republic of Uzbekistan, Tashkent, Uzbekistan
2 shared publications - Guohua Jiang
School of Materials Science and Engineering, Zhejiang Sci–Tech University, Hangzhou, China
2 shared publications - J. V. Siniutsich
Institute of Chemistry of New Materials, NAS of Belarus, Minsk, Belarus
2 shared publications
Latest Publications
- 29 November 2025
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 36 (12)
Physicochemical Characteristics of Nanocomposite Hydrogels Based on Carboxymethylcellulose and Zinc Oxide Nanoparticles and Study Its Sun Protection Properties and Antibacterial Activity
The conditions for synthesizing a polymer‐metal complex hydrogel containing zinc oxide nanoparticles (ZnO NPs) of various sizes and shapes, using chemical methods from solutions of purified sodium‐carboxymethylcellulose (Na‐CMC) with a degree of substitution of 0.97 and a degree of polymerization of 1000, along with aqueous solutions of zinc nitrate hexahydrate at 80°C, were determined. It was found that mixing of those solutions led to ionic‐coordinate cross‐linking binding of the zinc ions (Zn 2+ ) with the carboxylate anions (R‐COO − ) of Na‐CMC. The physicochemical properties of the hydrogel containing ZnO NPs of various sizes and shapes, stabilized by Na‐CMC macromolecules, were examined using FT‐IR, UV–Vis spectroscopy, AFM, SEM, TEM, XRD diffraction, and dynamic light scattering (DLS) analysis methods. It was found that increasing the initial concentration of Zn(NO 3 ) 2 in Na‐CMC hydrogel results in the formation of ZnO NPs with various sizes, contents, and shapes during chemical reduction. Additionally, DLS and zeta potential measurements confirmed the stability of ZnO NPs with a ζ potential of −38.3 mV in Na‐CMC hydrogel during 72 days of storage times. A strong sunscreen effect was observed in the CMC/ZnO NPs hydrogel containing 0.0324% ZnO NPs sized 35–95 nm, compared with the commercial “Floresan” sunscreen cream. The antibacterial activity of the hydrogel containing ZnO NPs with sizes of 35–95 nm was tested using two assays against the bacterium Staphylococcus epidermidis and the fungus Candida albicans . The hydrogel exhibited a strong bactericidal “nano effect,” achieving a 100% kill rate compared to the control and the commercial “Floresan” sunscreen cream. Na‐CMC hydrogels incorporating ZnO NPs have potential for broad use in medical and cosmetic applications, serving as sunscreens with antibacterial properties.
- 29 November 2025
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 36 (12)
Physicochemical Characteristics of Nanocomposite Hydrogels Based on Carboxymethylcellulose and Zinc Oxide Nanoparticles and Study Its Sun Protection Properties and Antibacterial Activity
The conditions for synthesizing a polymer‐metal complex hydrogel containing zinc oxide nanoparticles (ZnO NPs) of various sizes and shapes, using chemical methods from solutions of purified sodium‐carboxymethylcellulose (Na‐CMC) with a degree of substitution of 0.97 and a degree of polymerization of 1000, along with aqueous solutions of zinc nitrate hexahydrate at 80°C, were determined. It was found that mixing of those solutions led to ionic‐coordinate cross‐linking binding of the zinc ions (Zn 2+ ) with the carboxylate anions (R‐COO − ) of Na‐CMC. The physicochemical properties of the hydrogel containing ZnO NPs of various sizes and shapes, stabilized by Na‐CMC macromolecules, were examined using FT‐IR, UV–Vis spectroscopy, AFM, SEM, TEM, XRD diffraction, and dynamic light scattering (DLS) analysis methods. It was found that increasing the initial concentration of Zn(NO 3 ) 2 in Na‐CMC hydrogel results in the formation of ZnO NPs with various sizes, contents, and shapes during chemical reduction. Additionally, DLS and zeta potential measurements confirmed the stability of ZnO NPs with a ζ potential of −38.3 mV in Na‐CMC hydrogel during 72 days of storage times. A strong sunscreen effect was observed in the CMC/ZnO NPs hydrogel containing 0.0324% ZnO NPs sized 35–95 nm, compared with the commercial “Floresan” sunscreen cream. The antibacterial activity of the hydrogel containing ZnO NPs with sizes of 35–95 nm was tested using two assays against the bacterium Staphylococcus epidermidis and the fungus Candida albicans . The hydrogel exhibited a strong bactericidal “nano effect,” achieving a 100% kill rate compared to the control and the commercial “Floresan” sunscreen cream. Na‐CMC hydrogels incorporating ZnO NPs have potential for broad use in medical and cosmetic applications, serving as sunscreens with antibacterial properties.
- 10 June 2025
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 36 (6)
Synthesis, Characterization, and Cytotoxic Activity of Stable Selenium Nanoparticles‐Incorporated Carboxymethylcellulose Solution
Selenium nanoparticles (SeNPs) have attracted considerable attention in biomedical research due to their antioxidant properties and potential therapeutic applications. In this study, selenium nanoparticles (SeNPs) were synthesized from sodium selenite (Na2SeO3) using ascorbic acid as a reducing agent and sodium carboxymethylcellulose (Na‐CMC) as an environmentally friendly stabilizer. Fourier‐transform infrared spectroscopy (FTIR) confirmed ion‐dipole and hydrogen bonding interactions between SeNPs and functional groups of Na‐CMC spectra at 1601 and 3426 cm−1. Besides, dynamic light scattering (DLS) and zeta potential measurements demonstrated the stability of SeNPs with ζ = − 40.5 mV in solution over extended storage periods till 672 h. Scanning electron microscopy (SEM) analysis revealed a correlation between precursor concentration of Na2SeO3 (0.0165–0.122 wt%), spherical nanoparticle size (5–40 nm and 15–75 nm), and morphology. Remarkably, the obtained SeNPs exhibited lower acute toxicity at different doses (0.076 and 0.220 mg/mL) and higher LD50 values (maximum 2005.36 and 1405.31 mg/kg) than SeO32− ions demonstrated via intravenous and intraperitoneal routes of administration, along with a prolonged release profile of 43% by the 48‐h incubation period. Antioxidant activity was evaluated using the DPPH assay. While cytotoxicity was assessed against 8 × 106 cells/mL Ehrlich ascites carcinoma (EAC) cells, similar cytotoxic activity was observed at equal doses of 10 mg/kg of CMC/SeNPs (15–75 nm) and Doxorubicin showing 94.2% (IC50 = 0.84 mg/kg) and 96.4% (IC50 = 0.78 mg/kg), respectively. Interestingly, SeNPs (40–65 nm) exhibited a strong “nanoeffect” achieving 93% cytotoxicity (IC50 = 1.01 mg/kg) after 12 h of incubation, comparable to doxorubicin. These results underscore the potential of SeNPs as a promising candidate for biomedical applications, particularly in cancer therapy.
- 10 June 2025
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 36 (6)
Synthesis, Characterization, and Cytotoxic Activity of Stable Selenium Nanoparticles‐Incorporated Carboxymethylcellulose Solution
Selenium nanoparticles (SeNPs) have attracted considerable attention in biomedical research due to their antioxidant properties and potential therapeutic applications. In this study, selenium nanoparticles (SeNPs) were synthesized from sodium selenite (Na2SeO3) using ascorbic acid as a reducing agent and sodium carboxymethylcellulose (Na‐CMC) as an environmentally friendly stabilizer. Fourier‐transform infrared spectroscopy (FTIR) confirmed ion‐dipole and hydrogen bonding interactions between SeNPs and functional groups of Na‐CMC spectra at 1601 and 3426 cm−1. Besides, dynamic light scattering (DLS) and zeta potential measurements demonstrated the stability of SeNPs with ζ = − 40.5 mV in solution over extended storage periods till 672 h. Scanning electron microscopy (SEM) analysis revealed a correlation between precursor concentration of Na2SeO3 (0.0165–0.122 wt%), spherical nanoparticle size (5–40 nm and 15–75 nm), and morphology. Remarkably, the obtained SeNPs exhibited lower acute toxicity at different doses (0.076 and 0.220 mg/mL) and higher LD50 values (maximum 2005.36 and 1405.31 mg/kg) than SeO32− ions demonstrated via intravenous and intraperitoneal routes of administration, along with a prolonged release profile of 43% by the 48‐h incubation period. Antioxidant activity was evaluated using the DPPH assay. While cytotoxicity was assessed against 8 × 106 cells/mL Ehrlich ascites carcinoma (EAC) cells, similar cytotoxic activity was observed at equal doses of 10 mg/kg of CMC/SeNPs (15–75 nm) and Doxorubicin showing 94.2% (IC50 = 0.84 mg/kg) and 96.4% (IC50 = 0.78 mg/kg), respectively. Interestingly, SeNPs (40–65 nm) exhibited a strong “nanoeffect” achieving 93% cytotoxicity (IC50 = 1.01 mg/kg) after 12 h of incubation, comparable to doxorubicin. These results underscore the potential of SeNPs as a promising candidate for biomedical applications, particularly in cancer therapy.
- 1 March 2025
- Published by Pleiades Publishing Ltd in Russian Journal of Organic Chemistry
- Vol. 61 (3) , 378-384
Synthesis and Antiproliferative Activity of 4-(1H-Benzimidazol-2-yl)-N-{3-[(pyrimidin-2-yl)amino]phenyl}benzamides as Potential Protein Kinase Inhibitors
The results of studying the synthesis and antiproliferative activity of new 4-(1H-benzimidazol-2-yl)benzamides containing pharmacophoric 2aminopyrimidine and pyridine moieties are reported. The target compounds were obtained by the acylation of N-(pyrimidin-2-yl)-m-phenylenediamines with 4-(1H-benzimidazol-2-yl)benzoyl chloride or by the aminolysis 4-(1H-benzimidazol-2-yl)benzoic acid with the same amines. The synthesized compounds were evaluated for their in vitro antiproliferative activity against stable human tumor cell lines K562, HL-60, RPMI 1788, and HeLa.
- 1 March 2025
- Published by Pleiades Publishing Ltd in Russian Journal of Organic Chemistry
- Vol. 61 (3) , 378-384
Synthesis and Antiproliferative Activity of 4-(1H-Benzimidazol-2-yl)-N-{3-[(pyrimidin-2-yl)amino]phenyl}benzamides as Potential Protein Kinase Inhibitors
The results of studying the synthesis and antiproliferative activity of new 4-(1H-benzimidazol-2-yl)benzamides containing pharmacophoric 2aminopyrimidine and pyridine moieties are reported. The target compounds were obtained by the acylation of N-(pyrimidin-2-yl)-m-phenylenediamines with 4-(1H-benzimidazol-2-yl)benzoyl chloride or by the aminolysis 4-(1H-benzimidazol-2-yl)benzoic acid with the same amines. The synthesized compounds were evaluated for their in vitro antiproliferative activity against stable human tumor cell lines K562, HL-60, RPMI 1788, and HeLa.
- Open Access
- 3 April 2024
- Published by Publishing House Belorusskaya Nauka in Proceedings of the National Academy of Sciences of Belarus. Physical-technical series
- Vol. 69 (1) , 65-75
Mathematical modeling of the creation process and aging of polymer composite materials
Based on the analysis of the literature on the possibility of using neural networks to create new materials with high functional properties, the article considers a solution to the problem of determining the operational stability of polymeric composite materials by creating physical and chemically sound mathematical prediction models. Epoxy resins of the UP-637 and EA brands with an isophorone diamine hardener were chosen as the matrix of the model composite material, and oligobutadiene rubber of the SKN-10 KTR brand was chosen as the modifier. It justifies directions of work necessary for development of new materials creation methodology with optimal characteristics, building a model for changing the properties of materials at variation of composition and implementation of full-scale mathematical modeling of physical and chemical processes of polymer composite materials aging at changing level and time of climatic factors influence. Verification of the obtained dependence of service characteristics on the composition of the material and the level of influencing climatic factors was carried out on the basis of data from full-scale tests in a temperate climate. The proposed methodology for modelling the properties of polymer composite materials will reduce the development time of new materials and allow creation of polymer composites based on epoxy resin containing fillers of various natures (carbon, mineral and polymer) with high performance parameters.
- 3 April 2024
- Published by Publishing House Belorusskaya Nauka in Proceedings of the National Academy of Sciences of Belarus. Physical-technical series
- Vol. 69 (1) , 65-75
Open AccessMathematical modeling of the creation process and aging of polymer composite materials
Based on the analysis of the literature on the possibility of using neural networks to create new materials with high functional properties, the article considers a solution to the problem of determining the operational stability of polymeric composite materials by creating physical and chemically sound mathematical prediction models. Epoxy resins of the UP-637 and EA brands with an isophorone diamine hardener were chosen as the matrix of the model composite material, and oligobutadiene rubber of the SKN-10 KTR brand was chosen as the modifier. It justifies directions of work necessary for development of new materials creation methodology with optimal characteristics, building a model for changing the properties of materials at variation of composition and implementation of full-scale mathematical modeling of physical and chemical processes of polymer composite materials aging at changing level and time of climatic factors influence. Verification of the obtained dependence of service characteristics on the composition of the material and the level of influencing climatic factors was carried out on the basis of data from full-scale tests in a temperate climate. The proposed methodology for modelling the properties of polymer composite materials will reduce the development time of new materials and allow creation of polymer composites based on epoxy resin containing fillers of various natures (carbon, mineral and polymer) with high performance parameters.
- 1 December 2023
- Published by Pleiades Publishing Ltd in Russian Journal of Organic Chemistry
- Vol. 59 (12) , 2167-2175
Synthesis of Unsymmetrically Substituted Succinic Acid Diamides Containing a Pharmacophoric 2-Aminopyrimidine Fragment as Potential Protein Kinase Inhibitors
Succinic acid diamides containing two pharmacophoric fragments, one of which is 2aminopyrimidine, and the other, N-methylpiperazine, 2-aminopyrimidine, or substituted aniline moiety, were synthesized in two steps. The synthetic scheme included acylation of substituted (pyrimidin-2-ylamino)aniline or pyrimidin-2-amine with succinic anhydride and the subsequent acylation of another heterocyclic or aromatic amine with the resulting pyrimidine-substituted succinic acid monoamide. The key intermediate products in the synthesis are succinic acid anilides. The acylation heterocyclic or aromatic amines with substituted succinic acid monochloride or amidation of succinic acid benzotriazolyl ester gave the corresponding succinic acid diamides as potential inhibitors of enzymes mediating tumorigenic processes.
- 1 December 2023
- Published by Pleiades Publishing Ltd in Russian Journal of Organic Chemistry
- Vol. 59 (12) , 2167-2175
Synthesis of Unsymmetrically Substituted Succinic Acid Diamides Containing a Pharmacophoric 2-Aminopyrimidine Fragment as Potential Protein Kinase Inhibitors
Succinic acid diamides containing two pharmacophoric fragments, one of which is 2aminopyrimidine, and the other, N-methylpiperazine, 2-aminopyrimidine, or substituted aniline moiety, were synthesized in two steps. The synthetic scheme included acylation of substituted (pyrimidin-2-ylamino)aniline or pyrimidin-2-amine with succinic anhydride and the subsequent acylation of another heterocyclic or aromatic amine with the resulting pyrimidine-substituted succinic acid monoamide. The key intermediate products in the synthesis are succinic acid anilides. The acylation heterocyclic or aromatic amines with substituted succinic acid monochloride or amidation of succinic acid benzotriazolyl ester gave the corresponding succinic acid diamides as potential inhibitors of enzymes mediating tumorigenic processes.