Tae-Seong Kim
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Tae-Seong Kim has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Jang-Young Choi
Department of Electrical Engineering, Chungnam National University, Daejeon 34134, Republic of Korea
8 shared publications - Kyung-Hun Shin
Department of Electrical Engineering, Changwon National University, Changwon 51140, Republic of Korea
8 shared publications - Jun-Won Yang
Chungnam National University
5 shared publications - Manh-Dung Nguyen
Department of Electrical Engineering, Chungnam National University, Daejeon 34134, Republic of Korea
4 shared publications Yong-Joo Kim
Department of Biosystems Machinery Engineering, Chungnam National University, Daejeon, Republic of Korea
4 shared publications- Gang-Hyeon Jang
Convergence Technology Lab, Korea Electric Power Research Institute, Daejeon 34056, Republic of Korea
2 shared publications
Latest Publications
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 62 (10) , 7002006
Improved Method for Electromagnetic Analysis of Axial-Flux Permanent-Magnet Motor With 3-D Leakage Flux in Overhang Structures
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 62 (10) , 7002006
Improved Method for Electromagnetic Analysis of Axial-Flux Permanent-Magnet Motor With 3-D Leakage Flux in Overhang Structures
- Open Access
Analysis of Electromagnetic Characteristics of Outer Rotor Type BLDC Motor Based on Analytical Method and Optimal Design Using NSGA-II
This study investigates the electromagnetic analysis and optimal design of outer rotor type brushless DC (BLDC) motors for fan filter applications. The primary objective is to develop a method that integrates three-dimensional (3D) structural effects with efficient two-dimensional (2D) equivalent analysis. This study proposes a 2D equivalent analysis method that addresses the unique features of outer rotor type BLDC motors, particularly the permanent magnet (PM) overhang structure. This approach transforms the operating point on the B–H curve to facilitate accurate modeling in a 2D framework, overcoming traditional analysis limitations. An analytical method using spatial harmonics is introduced to derive essential electromagnetic quantities, namely flux linkage and back electromotive force (EMF). The method compensates for slot effects using the Carter coefficient, ensuring precise evaluation of circuit parameters and electromagnetic losses. To optimize motor performance, a multi-objective optimization technique is implemented using the Non-dominated Sorting Genetic Algorithm-II (NSGA-II), aiming to maximize both efficiency and power density. The research validates the proposed analytical approach against the finite element analysis method (FEM) results to confirm its accuracy.
Open AccessAnalysis of Electromagnetic Characteristics of Outer Rotor Type BLDC Motor Based on Analytical Method and Optimal Design Using NSGA-II
This study investigates the electromagnetic analysis and optimal design of outer rotor type brushless DC (BLDC) motors for fan filter applications. The primary objective is to develop a method that integrates three-dimensional (3D) structural effects with efficient two-dimensional (2D) equivalent analysis. This study proposes a 2D equivalent analysis method that addresses the unique features of outer rotor type BLDC motors, particularly the permanent magnet (PM) overhang structure. This approach transforms the operating point on the B–H curve to facilitate accurate modeling in a 2D framework, overcoming traditional analysis limitations. An analytical method using spatial harmonics is introduced to derive essential electromagnetic quantities, namely flux linkage and back electromotive force (EMF). The method compensates for slot effects using the Carter coefficient, ensuring precise evaluation of circuit parameters and electromagnetic losses. To optimize motor performance, a multi-objective optimization technique is implemented using the Non-dominated Sorting Genetic Algorithm-II (NSGA-II), aiming to maximize both efficiency and power density. The research validates the proposed analytical approach against the finite element analysis method (FEM) results to confirm its accuracy.
- 24 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 61 (9) , 1-5
Characteristic Analysis and Improved Design of IPMSM for Automotive Compressor Through Tapering of Rotor Surface
This study investigates the tapering rotor surface technique in an interior permanent magnet synchronous motor (IPMSM) for electric vehicle compressors. To achieve this, this article proposes a novel tapered rotor design with a nonuniform air gap, created by applying asymmetric shaping to the bridge region along the rotor radius. A conventional IPMSM with a uniform air gap produces a trapezoidal-shaped flux density, introducing high-order harmonics and causing certain drawbacks for the motor. This study selected the offset height of the eccentric center and the distance between the rotor radius and the magnet as improvement design variables. The proposed tapered rotor model, characterized by a nonuniform air gap, demonstrated better performance than the initial model. Subsequently, a stress analysis of the thinned barrier was conducted to validate the structural integrity of the proposed model. The key parameters, such as air-gap flux density, cogging torque, inductance, flux linkage, and efficiency maps, were compared between the initial and improved models using finite element method (FEM) and MATLAB simulations. The proposed tapering motor achieved a 36.36% reduction in cogging torque error rate and a 0.6% improvement in efficiency deviation at the primary operating point. A prototype of the conventional rotor model was manufactured, and its efficiency curve was verified, which showed good agreement with the FEM analysis results.
- 24 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 61 (9) , 1-5
Characteristic Analysis and Improved Design of IPMSM for Automotive Compressor Through Tapering of Rotor Surface
This study investigates the tapering rotor surface technique in an interior permanent magnet synchronous motor (IPMSM) for electric vehicle compressors. To achieve this, this article proposes a novel tapered rotor design with a nonuniform air gap, created by applying asymmetric shaping to the bridge region along the rotor radius. A conventional IPMSM with a uniform air gap produces a trapezoidal-shaped flux density, introducing high-order harmonics and causing certain drawbacks for the motor. This study selected the offset height of the eccentric center and the distance between the rotor radius and the magnet as improvement design variables. The proposed tapered rotor model, characterized by a nonuniform air gap, demonstrated better performance than the initial model. Subsequently, a stress analysis of the thinned barrier was conducted to validate the structural integrity of the proposed model. The key parameters, such as air-gap flux density, cogging torque, inductance, flux linkage, and efficiency maps, were compared between the initial and improved models using finite element method (FEM) and MATLAB simulations. The proposed tapering motor achieved a 36.36% reduction in cogging torque error rate and a 0.6% improvement in efficiency deviation at the primary operating point. A prototype of the conventional rotor model was manufactured, and its efficiency curve was verified, which showed good agreement with the FEM analysis results.
- Open Access
- 12 November 2024
- Published by MDPI AG in Mathematics
- Vol. 12 (22) , 3526
Fast Prediction of Characteristics in Wound Rotor Synchronous Condenser Using Subdomain Modeling
Wound rotor synchronous condensers (WRSCs) are DC-excited rotor machines that utilize rotor winding instead of permanent magnets. Their voltage regulator controls the rotor field to generate or absorb reactive power, thereby regulating grid voltage or improving power factor. A key characteristic of a WRSC is the compounding curve, which shows the required rotor current under specific stator current and voltage conditions. This paper presents an approach for quickly calculating the electromagnetic parameters of a WRSC using a mathematical method. After determining magnetic flux density, induced voltage, and inductance through analytical methods, the Park and Clarke transformations are applied to derive the dq-frame quantities, enabling prediction of active and reactive powers and compounding curve characteristics. The 60 Hz model was evaluated through comparison with finite element method (FEM) simulations. Results of flux density, induced voltage, and the compounding curve under varying rotor and stator current conditions showed that the proposed method achieved comparable performance to FEM simulation while reducing computational time by half.
- 12 November 2024
- Published by MDPI AG in Mathematics
- Vol. 12 (22) , 3526
Open AccessFast Prediction of Characteristics in Wound Rotor Synchronous Condenser Using Subdomain Modeling
Wound rotor synchronous condensers (WRSCs) are DC-excited rotor machines that utilize rotor winding instead of permanent magnets. Their voltage regulator controls the rotor field to generate or absorb reactive power, thereby regulating grid voltage or improving power factor. A key characteristic of a WRSC is the compounding curve, which shows the required rotor current under specific stator current and voltage conditions. This paper presents an approach for quickly calculating the electromagnetic parameters of a WRSC using a mathematical method. After determining magnetic flux density, induced voltage, and inductance through analytical methods, the Park and Clarke transformations are applied to derive the dq-frame quantities, enabling prediction of active and reactive powers and compounding curve characteristics. The 60 Hz model was evaluated through comparison with finite element method (FEM) simulations. Results of flux density, induced voltage, and the compounding curve under varying rotor and stator current conditions showed that the proposed method achieved comparable performance to FEM simulation while reducing computational time by half.
- 8 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 61 (1) , 1-4
Analytical Study and Experimental Verification of Electromagnetic Vibration Sources and Optimization of Rotor Skew in Surface-Mounted Permanent Magnet Synchronous Machines
In this paper, a method for calculating the cogging torque and air-gap flux density of a surface-mounted permanent magnet machine (SPMSM) is studied. First, a simplified model of the SPMSM is presented for electromagnetic analysis, and the magnetic vector potential is derived using the governing equations based on Maxwell’s equations in a two-dimensional polar coordinate system. The air gap flux density is derived using appropriate boundary conditions, and based on analytical solutions, the cogging torque was calculated. The analysis results derived through the proposed method and the skew of the rotor, the skew angle and segment that satisfy the optimal cogging torque of SPMSMs are derived. The accuracy of the proposed method is verified through a comparison with the analysis results with the finite element method.
- 8 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 61 (1) , 1-4
Analytical Study and Experimental Verification of Electromagnetic Vibration Sources and Optimization of Rotor Skew in Surface-Mounted Permanent Magnet Synchronous Machines
In this paper, a method for calculating the cogging torque and air-gap flux density of a surface-mounted permanent magnet machine (SPMSM) is studied. First, a simplified model of the SPMSM is presented for electromagnetic analysis, and the magnetic vector potential is derived using the governing equations based on Maxwell’s equations in a two-dimensional polar coordinate system. The air gap flux density is derived using appropriate boundary conditions, and based on analytical solutions, the cogging torque was calculated. The analysis results derived through the proposed method and the skew of the rotor, the skew angle and segment that satisfy the optimal cogging torque of SPMSMs are derived. The accuracy of the proposed method is verified through a comparison with the analysis results with the finite element method.
- Open Access
- 1 February 2024
- Published by AIP Publishing in AIP Advances
- Vol. 14 (2)
Demagnetization analysis of outer-rotor-type BLDC motors considering permanent magnet overhang structure
This paper presents an analysis of demagnetization of an outer rotor type brushless DC (BLDC) motor with a permanent magnet (PM) overhang structure. The proposed model converts the operating points of PM to consider such a three-dimensional (3D) structure in two dimensions (2D). In addition, the rotor yoke thickness of the proposed model is increased to consider the housing rotor. Ferrite PMs require demagnetization analysis owing to their decreasing coercivity at lower temperatures compared with rare-earth PMs. Hence, demagnetization analysis is conducted using a proposed model while considering, the PM overhang structure. The demagnetization analysis results are compared with the results of proposed model and 3D FEA analyses.
- 1 February 2024
- Published by AIP Publishing in AIP Advances
- Vol. 14 (2)
Open AccessDemagnetization analysis of outer-rotor-type BLDC motors considering permanent magnet overhang structure
This paper presents an analysis of demagnetization of an outer rotor type brushless DC (BLDC) motor with a permanent magnet (PM) overhang structure. The proposed model converts the operating points of PM to consider such a three-dimensional (3D) structure in two dimensions (2D). In addition, the rotor yoke thickness of the proposed model is increased to consider the housing rotor. Ferrite PMs require demagnetization analysis owing to their decreasing coercivity at lower temperatures compared with rare-earth PMs. Hence, demagnetization analysis is conducted using a proposed model while considering, the PM overhang structure. The demagnetization analysis results are compared with the results of proposed model and 3D FEA analyses.
- Open Access
- 1 February 2024
- Published by AIP Publishing in AIP Advances
- Vol. 14 (2)
Electromagnetic analysis of permanent magnet-assisted synchronous reluctance motor based on magnetic equivalent circuit
As rare-earth permanent magnet prices continue to fluctuate, interest in non-rare-earth permanent magnet-assisted synchronous reluctance motors (PMa-SynRMs) is increasing. However, non-rare-earth PMa-SynRMs have a multi-layer structure with interior permanent magnets to compensate for the low magnetic fields. Therefore, the rotor has several design parameters, and electromagnetic analysis is time-consuming. To overcome these challenges, magnetic equivalent circuit analysis was used to perform fast electromagnetic analysis of non-rare-earth PMa-SynRMs. In addition, the validity of the proposed method was confirmed through a comparison of the obtained results with those of finite element analysis.
- 1 February 2024
- Published by AIP Publishing in AIP Advances
- Vol. 14 (2)
Open AccessElectromagnetic analysis of permanent magnet-assisted synchronous reluctance motor based on magnetic equivalent circuit
As rare-earth permanent magnet prices continue to fluctuate, interest in non-rare-earth permanent magnet-assisted synchronous reluctance motors (PMa-SynRMs) is increasing. However, non-rare-earth PMa-SynRMs have a multi-layer structure with interior permanent magnets to compensate for the low magnetic fields. Therefore, the rotor has several design parameters, and electromagnetic analysis is time-consuming. To overcome these challenges, magnetic equivalent circuit analysis was used to perform fast electromagnetic analysis of non-rare-earth PMa-SynRMs. In addition, the validity of the proposed method was confirmed through a comparison of the obtained results with those of finite element analysis.