Marcus Wohlgemuth
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Marcus Wohlgemuth has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Felix Gunkel
Forschungszentrum Jülich
3 shared publications - Alexandros Sarantopoulos
Peter Grünberg Institute‐Electronic Materials (PGI‐7) Forschungszentrum Jülich GmbH Jülich Germany
2 shared publications - Regina Dittmann
Forschungszentrum Jülich
2 shared publications A. Kaus
Peter Grünberg Institute 7, Forschungszentrum Jülich GmbH, Jülich, Germany
1 shared publicationA. Sarantopoulos
Peter Grünberg Institute 7, Forschungszentrum Jülich GmbH, Jülich, Germany
1 shared publication- Anton Kaus
Forschungszentrum Jülich
1 shared publication
Latest Publications
- Open Access
- 9 October 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-11
Chemical termination and interfacial redox behavior of freestanding SrTiO3
Tailoring oxide heterointerfaces has sparked the search for electronic and ionic phenomena in low-dimensional, confined systems. The fabrication of freestanding oxide membranes has further expanded the possible fields of application. Based on the structural vulnerability and physical confinement of such membranes, it remains a great challenge to achieve atomically defined and single-terminated surfaces by the typical chemical treatments and to induce interfacial redox-reactions in these nanoscopic transition metal oxides. To address this, we use the sacrificial layer exfoliation route, involving an all-perovskite epitaxial layer structure to fabricate freestanding $$\hbox {SrTiO}_3$$ membranes with high crystallinity and defined surface morphology. To study the interfacial redox-behavior of the singly $$\hbox {TiO}_2$$ -terminated, annealed membrane, we employ the formation of oxygen vacancies in $$\hbox {SrTiO}_3$$ , triggered by the low-pressure deposition of a thin $$\hbox {LaAlO}_3$$ layer epitaxially grown on the transferred $$\hbox {SrTiO}_3$$ layer. A mixed Ti $$^{3+/4+}$$ valence state is indicative of the induced transfer of oxygen ions from the confined $$\hbox {SrTiO}_3$$ membrane into the $$\hbox {LaAlO}_3$$ overlayer, resulting in an oxygen vacancy concentration of around $$10^{21}~{\hbox {cm}^{-3}}$$ in the confined $$\hbox {SrTiO}_3$$ membrane. Our results highlight that interfacial redox-reactions can be induced in $$\hbox {SrTiO}_3$$ membranes, which enables the ionic engineering of confined oxide heterointerfaces based on the freestanding oxide approach.- 9 October 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-11
Open AccessChemical termination and interfacial redox behavior of freestanding SrTiO3
Tailoring oxide heterointerfaces has sparked the search for electronic and ionic phenomena in low-dimensional, confined systems. The fabrication of freestanding oxide membranes has further expanded the possible fields of application. Based on the structural vulnerability and physical confinement of such membranes, it remains a great challenge to achieve atomically defined and single-terminated surfaces by the typical chemical treatments and to induce interfacial redox-reactions in these nanoscopic transition metal oxides. To address this, we use the sacrificial layer exfoliation route, involving an all-perovskite epitaxial layer structure to fabricate freestanding $$\hbox {SrTiO}_3$$ membranes with high crystallinity and defined surface morphology. To study the interfacial redox-behavior of the singly $$\hbox {TiO}_2$$ -terminated, annealed membrane, we employ the formation of oxygen vacancies in $$\hbox {SrTiO}_3$$ , triggered by the low-pressure deposition of a thin $$\hbox {LaAlO}_3$$ layer epitaxially grown on the transferred $$\hbox {SrTiO}_3$$ layer. A mixed Ti $$^{3+/4+}$$ valence state is indicative of the induced transfer of oxygen ions from the confined $$\hbox {SrTiO}_3$$ membrane into the $$\hbox {LaAlO}_3$$ overlayer, resulting in an oxygen vacancy concentration of around $$10^{21}~{\hbox {cm}^{-3}}$$ in the confined $$\hbox {SrTiO}_3$$ membrane. Our results highlight that interfacial redox-reactions can be induced in $$\hbox {SrTiO}_3$$ membranes, which enables the ionic engineering of confined oxide heterointerfaces based on the freestanding oxide approach. - Open Access
- 6 January 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Chemical Termination and Interfacial Redox Behavior of Freestanding SrTiO3
Tailoring oxide heterointerfaces has sparked the search for electronic and ionic phenomena in low-dimensional, confined systems. The fabrication of freestanding oxide membranes has further expanded the possible fields of application. Based on the structural vulnerability and physical confinement of such membranes, it remains a great challenge to achieve atomically defined and single-terminated surfaces by the typical chemical treatments and to induce interfacial redox-reactions in these nanoscopic transition metal oxides. To address this, we use the sacrificial layer exfoliation route, involving an all-perovskite epitaxial layer structure to fabricate freestanding SrTiO3 membranes with high crystallinity and defined surface morphology. To study the interfacial redox-behavior of the singly TiO2-terminated, annealed membrane, we employ the formation of oxygen vacancies in SrTiO3, triggered by the low-pressure deposition of a thin LaAlO3 layer epitaxially grown on the transferred SrTiO3 layer. A mixed Ti3+/4+ valence state is indicative of the induced transfer of oxygen ions from the confined SrTiO3 membrane into the LaAlO3 overlayer, resulting in an oxygen vacancy concentration around 1021 cm−3 in the confined SrTiO3 membrane. Our results highlight that interfacial redox-reactions can be induced in SrTiO3 membranes, which enables the ionic engineering of confined oxides heterointerfaces based on the freestanding oxide approach.
- 6 January 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessChemical Termination and Interfacial Redox Behavior of Freestanding SrTiO3
Tailoring oxide heterointerfaces has sparked the search for electronic and ionic phenomena in low-dimensional, confined systems. The fabrication of freestanding oxide membranes has further expanded the possible fields of application. Based on the structural vulnerability and physical confinement of such membranes, it remains a great challenge to achieve atomically defined and single-terminated surfaces by the typical chemical treatments and to induce interfacial redox-reactions in these nanoscopic transition metal oxides. To address this, we use the sacrificial layer exfoliation route, involving an all-perovskite epitaxial layer structure to fabricate freestanding SrTiO3 membranes with high crystallinity and defined surface morphology. To study the interfacial redox-behavior of the singly TiO2-terminated, annealed membrane, we employ the formation of oxygen vacancies in SrTiO3, triggered by the low-pressure deposition of a thin LaAlO3 layer epitaxially grown on the transferred SrTiO3 layer. A mixed Ti3+/4+ valence state is indicative of the induced transfer of oxygen ions from the confined SrTiO3 membrane into the LaAlO3 overlayer, resulting in an oxygen vacancy concentration around 1021 cm−3 in the confined SrTiO3 membrane. Our results highlight that interfacial redox-reactions can be induced in SrTiO3 membranes, which enables the ionic engineering of confined oxides heterointerfaces based on the freestanding oxide approach.
- Open Access
- 1 February 2024
- Published by AIP Publishing in APL Materials
- Vol. 12 (2)
Control of growth kinetics during remote epitaxy of complex oxides on graphene by pulsed laser deposition
Remote epitaxy through 2D materials opens new opportunities for research and application, overcoming some limitations of classical epitaxy and allowing the creation of freestanding layers. However, using graphene as a 2D interlayer for remote epitaxy of metal oxides is challenging, particularly when carried out by pulsed laser deposition (PLD). The graphene layer can be easily oxidized under the typically applied high oxygen pressures, and the impact of highly kinetic particles of the plasma plume can lead to severe damages. In this study, both aspects are addressed: Argon is introduced as an inert background gas in order to avoid oxidation and to reduce the kinetic impact of the plasma species on graphene. The laser spot size is minimized to control the plasma plume and particle flux. As a model system, strontium titanate (STO) is quasi-homoepitaxially grown on graphene buffered STO single crystals. Raman spectroscopy is performed to evaluate the 2D, G, and D band fingerprints of the graphene layer and to assess the defect structure of the interlayer after the deposition. Our results prove that control of the growth kinetics by reducing the laser spot size and by using high argon pressures provides a key strategy to conserve graphene with a low defect density during PLD while allowing a layer-by-layer growth of structurally coherent oxide layers. This strategy may be generalized for the PLD remote epitaxy of many complex oxides, opening the way for integrating 2D materials with complex oxides using widely accessible PLD processes.
- 1 February 2024
- Published by AIP Publishing in APL Materials
- Vol. 12 (2)
Open AccessControl of growth kinetics during remote epitaxy of complex oxides on graphene by pulsed laser deposition
Remote epitaxy through 2D materials opens new opportunities for research and application, overcoming some limitations of classical epitaxy and allowing the creation of freestanding layers. However, using graphene as a 2D interlayer for remote epitaxy of metal oxides is challenging, particularly when carried out by pulsed laser deposition (PLD). The graphene layer can be easily oxidized under the typically applied high oxygen pressures, and the impact of highly kinetic particles of the plasma plume can lead to severe damages. In this study, both aspects are addressed: Argon is introduced as an inert background gas in order to avoid oxidation and to reduce the kinetic impact of the plasma species on graphene. The laser spot size is minimized to control the plasma plume and particle flux. As a model system, strontium titanate (STO) is quasi-homoepitaxially grown on graphene buffered STO single crystals. Raman spectroscopy is performed to evaluate the 2D, G, and D band fingerprints of the graphene layer and to assess the defect structure of the interlayer after the deposition. Our results prove that control of the growth kinetics by reducing the laser spot size and by using high argon pressures provides a key strategy to conserve graphene with a low defect density during PLD while allowing a layer-by-layer growth of structurally coherent oxide layers. This strategy may be generalized for the PLD remote epitaxy of many complex oxides, opening the way for integrating 2D materials with complex oxides using widely accessible PLD processes.