Robby Kurniawan Harahap
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Robby Kurniawan Harahap has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Eri Prasetyo Wibowo
Gunadarma University
4 shared publications - Antonius Irianto Sukowati
Dept. of Electrical Engineering, Cendekia Abditama University
2 shared publications Desy Kristyawati
Universitas Gunadarma, Indonesia
2 shared publications- Dyah Nur’aIningsih
Dept. of Electrical Engineering, Gunadarma University
2 shared publications - R.A. Sekar Ciptaning Anindya
Dept. of Electrical Engineering, Gunadarma University
2 shared publications - Widyastuti
Dept. of Electrical Engineering, Gunadarma University
2 shared publications
Latest Publications
- Open Access
- 28 July 2026
- Published by Institut Teknologi Nasional, Bandung in ELKOMIKA: Jurnal Teknik Energi Elektrik, Teknik Telekomunikasi, & Teknik Elektronika
- Vol. 14 (3) , 374
Comparative Analysis of LCX and Bidirectional Antenna Performance in Jakarta MRT Telecommunication System
Comparative Analysis of LCX and Bidirectional Antenna Performance in Jakarta MRT Telecommunication System
- 28 July 2026
- Published by Institut Teknologi Nasional, Bandung in ELKOMIKA: Jurnal Teknik Energi Elektrik, Teknik Telekomunikasi, & Teknik Elektronika
- Vol. 14 (3) , 374
Open AccessComparative Analysis of LCX and Bidirectional Antenna Performance in Jakarta MRT Telecommunication System
Comparative Analysis of LCX and Bidirectional Antenna Performance in Jakarta MRT Telecommunication System
- 25 November 2025
- Published by Institute of Electronics, Information and Communications Engineers (IEICE) in IEICE Electronics Express
- Vol. 22 (22) , 20258004
Erratum: Optimization of D flip-flop in RFID reader using full swing gate diffusion input (FSGDI) with buffer circuit to improve power efficiency [IEICE Electronics Express Vol. 22 (2025) No. 8 pp. 20250018]
- 25 November 2025
- Published by Institute of Electronics, Information and Communications Engineers (IEICE) in IEICE Electronics Express
- Vol. 22 (22) , 20258004
Erratum: Optimization of D flip-flop in RFID reader using full swing gate diffusion input (FSGDI) with buffer circuit to improve power efficiency [IEICE Electronics Express Vol. 22 (2025) No. 8 pp. 20250018]
- Open Access
- 24 September 2025
- Published by MDPI AG in Preprints.org
Integrating IoT and Machine Learning for Real-Time Soil-Based Crop and Fertilizer Recommendations: The UG-AgroPlan System
Precision agriculture plays a critical role in addressing global food security while minimizing environmental impact. However, conventional fertilization practices often rely on fixed schedules without real-time feedback from soil conditions, leading to inefficient resource use and reduced crop quality. Unlike existing systems that provide static fertilizer schedules or lack integration with real-time soil data, UG-AgroPlan uniquely combines a calibrated multi-parameter soil sensor and a K-Nearest Neighbors model to deliver adaptive recommendations that dynamically adjust to changing soil conditions. This study introduces the UG-AgroPlan system, which integrates IoT-based soil nutrient monitoring with Machine Learning algorithms to provide real-time crop and fertilizer recommendations. The system utilizes a calibrated multi-parameter soil sensor capable of detecting nitrogen (N), phosphorus (P), potassium (K), pH, moisture, temperature, and electrical conductivity with high accuracy (97.41% Field validation was conducted using Uzbekistan melon as a case study, as this crop is highly sensitive to soil nutrient balance and requires precise fertilization to achieve optimal quality and specific location. This characteristic makes it an ideal indicator for evaluating the system’s accuracy and effectiveness, applying four fertilization strategies (daily, weekly, monthly, and conventional). Results showed that the daily precision fertilization strategy achieved the best performance, with fruit sweetness reaching 15.59°Brix, average weight 3.69 kg, and length 30.14 cm, while reducing fertilizer usage by up to 18% compared to conventional methods. These findings demonstrate that UG-AgroPlan offers a scalable, accurate, and adaptive approach to sustainable smart farming by integrating real-time sensing, machine learning, and actionable agronomic recommendations. These findings demonstrate that UG-AgroPlan offers a scalable, accurate, and adaptive approach to sustainable smart farming by integrating real-time sensing, machine learning, and actionable agronomic recommendations. Unlike existing systems that provide static fertilizer schedules or lack integration with real-time soil data, UG-AgroPlan uniquely combines a calibrated multi-parameter soil sensor and a KNN model to deliver adaptive recommendations that dynamically adjust to changing soil conditions.
- 24 September 2025
- Published by MDPI AG in Preprints.org
Open AccessIntegrating IoT and Machine Learning for Real-Time Soil-Based Crop and Fertilizer Recommendations: The UG-AgroPlan System
Precision agriculture plays a critical role in addressing global food security while minimizing environmental impact. However, conventional fertilization practices often rely on fixed schedules without real-time feedback from soil conditions, leading to inefficient resource use and reduced crop quality. Unlike existing systems that provide static fertilizer schedules or lack integration with real-time soil data, UG-AgroPlan uniquely combines a calibrated multi-parameter soil sensor and a K-Nearest Neighbors model to deliver adaptive recommendations that dynamically adjust to changing soil conditions. This study introduces the UG-AgroPlan system, which integrates IoT-based soil nutrient monitoring with Machine Learning algorithms to provide real-time crop and fertilizer recommendations. The system utilizes a calibrated multi-parameter soil sensor capable of detecting nitrogen (N), phosphorus (P), potassium (K), pH, moisture, temperature, and electrical conductivity with high accuracy (97.41% Field validation was conducted using Uzbekistan melon as a case study, as this crop is highly sensitive to soil nutrient balance and requires precise fertilization to achieve optimal quality and specific location. This characteristic makes it an ideal indicator for evaluating the system’s accuracy and effectiveness, applying four fertilization strategies (daily, weekly, monthly, and conventional). Results showed that the daily precision fertilization strategy achieved the best performance, with fruit sweetness reaching 15.59°Brix, average weight 3.69 kg, and length 30.14 cm, while reducing fertilizer usage by up to 18% compared to conventional methods. These findings demonstrate that UG-AgroPlan offers a scalable, accurate, and adaptive approach to sustainable smart farming by integrating real-time sensing, machine learning, and actionable agronomic recommendations. These findings demonstrate that UG-AgroPlan offers a scalable, accurate, and adaptive approach to sustainable smart farming by integrating real-time sensing, machine learning, and actionable agronomic recommendations. Unlike existing systems that provide static fertilizer schedules or lack integration with real-time soil data, UG-AgroPlan uniquely combines a calibrated multi-parameter soil sensor and a KNN model to deliver adaptive recommendations that dynamically adjust to changing soil conditions.
- Open Access
- 12 September 2025
- Published by Kresnamedia Publisher in Jurnal Riset Informatika
- Vol. 7 (4) , 371-380
Prototype Of An Automatic Height And Weight Measurement System Based On Z-Scores For Determiningthe Nutritional Status Of Toddlers
Monitoring the nutritional status of children aged 24-60 months is a crucial aspect of ensuring their growth and development. The commonly used manual methods often have limitations in terms of accuracy and efficiency. This study aims to design and develop a prototype of an automated height and weight measurement system based on Z-Score to accurately and efficiently determine the nutritional status of children. The system is developed using the ESP8266 microcontroller as the control center, integrating an RFID module for child identification, an ultrasonic sensor for height measurement, and a load cell for weight measurement. The measurement data is then processed to generate a Z-Score value, which is displayed on an LCD screen. Based on the test results, the system demonstrates a measurement accuracy of 99.60% for children's height and weight. Additionally, the nutritional status assessment aligns with WHO standards. This system is expected to enhance the effectiveness and efficiency of nutritional monitoring for toddlers.
- 12 September 2025
- Published by Kresnamedia Publisher in Jurnal Riset Informatika
- Vol. 7 (4) , 371-380
Open AccessPrototype Of An Automatic Height And Weight Measurement System Based On Z-Scores For Determiningthe Nutritional Status Of Toddlers
Monitoring the nutritional status of children aged 24-60 months is a crucial aspect of ensuring their growth and development. The commonly used manual methods often have limitations in terms of accuracy and efficiency. This study aims to design and develop a prototype of an automated height and weight measurement system based on Z-Score to accurately and efficiently determine the nutritional status of children. The system is developed using the ESP8266 microcontroller as the control center, integrating an RFID module for child identification, an ultrasonic sensor for height measurement, and a load cell for weight measurement. The measurement data is then processed to generate a Z-Score value, which is displayed on an LCD screen. Based on the test results, the system demonstrates a measurement accuracy of 99.60% for children's height and weight. Additionally, the nutritional status assessment aligns with WHO standards. This system is expected to enhance the effectiveness and efficiency of nutritional monitoring for toddlers.
- Open Access
- 1 August 2025
- Published by Institute of Advanced Engineering and Science in International Journal of Electrical and Computer Engineering (IJECE)
- Vol. 15 (4) , 3696-3706
Integration of strain gauge sensor in biceps muscle movement detection using LabView
Muscle injuries caused by sports can have a serious impact on sportsmen, to avoid injuries during sports can be prevented by detecting the wrong movement using a strain gauge sensor attached to the muscle which in this study is devoted to the biceps muscle. The strain gauge will detect muscle movement, and the output generated at the strain gauge will be converted into the form of voltage and current which will be used to be processed using machine learning to get data patterns so that they can be grouped into data patterns of wrong movements and correct movements. The strain gauge movement pattern here is simulated using LabView by using a gauge resistance of 120 Ω, strain configuration Quarter Bridge 1, gauge factor 2.05, Vex is the excitation voltage given to the Wheatstone bridge is 5 V and the initial voltage -180.08 µV, the strain gauge output pattern is obtained in the form of Excel and with this data can be converted into voltage and current.
- 1 August 2025
- Published by Institute of Advanced Engineering and Science in International Journal of Electrical and Computer Engineering (IJECE)
- Vol. 15 (4) , 3696-3706
Open AccessIntegration of strain gauge sensor in biceps muscle movement detection using LabView
Muscle injuries caused by sports can have a serious impact on sportsmen, to avoid injuries during sports can be prevented by detecting the wrong movement using a strain gauge sensor attached to the muscle which in this study is devoted to the biceps muscle. The strain gauge will detect muscle movement, and the output generated at the strain gauge will be converted into the form of voltage and current which will be used to be processed using machine learning to get data patterns so that they can be grouped into data patterns of wrong movements and correct movements. The strain gauge movement pattern here is simulated using LabView by using a gauge resistance of 120 Ω, strain configuration Quarter Bridge 1, gauge factor 2.05, Vex is the excitation voltage given to the Wheatstone bridge is 5 V and the initial voltage -180.08 µV, the strain gauge output pattern is obtained in the form of Excel and with this data can be converted into voltage and current.
- Open Access
- 25 April 2025
- Published by Institute of Electronics, Information and Communications Engineers (IEICE) in IEICE Electronics Express
- Vol. 22 (8) , 20250018
Optimization of D flip-flop in RFID reader using full swing gate diffusion input (FSGDI) with buffer circuit to improve power efficiency
CMOS technology, commonly used in RFID circuits, faces limitations in power efficiency and chip size. This study optimizes the D Flip-Flop in RFID readers using Full Swing Gate Diffusion Input (FSGDI) with added buffers to reduce transistor count, power consumption, and delay, enhancing system performance. FSGDI achieves a stable output voltage and the lowest power consumption of 32.74 µW, reducing power by 84.91% with a lower delay of 0.15 ns and 3.3V compared to CMOS. The D-flip-flop with FSGDI integration proposed in this study is beneficial for improving power efficiency and signal stability in RFID readers.
- 25 April 2025
- Published by Institute of Electronics, Information and Communications Engineers (IEICE) in IEICE Electronics Express
- Vol. 22 (8) , 20250018
Open AccessOptimization of D flip-flop in RFID reader using full swing gate diffusion input (FSGDI) with buffer circuit to improve power efficiency
CMOS technology, commonly used in RFID circuits, faces limitations in power efficiency and chip size. This study optimizes the D Flip-Flop in RFID readers using Full Swing Gate Diffusion Input (FSGDI) with added buffers to reduce transistor count, power consumption, and delay, enhancing system performance. FSGDI achieves a stable output voltage and the lowest power consumption of 32.74 µW, reducing power by 84.91% with a lower delay of 0.15 ns and 3.3V compared to CMOS. The D-flip-flop with FSGDI integration proposed in this study is beneficial for improving power efficiency and signal stability in RFID readers.
- Open Access
- 1 January 2025
- Published by PT. Amirul Bangun Bangsa in Jurnal Pengabdian Masyarakat Bangsa
- Vol. 2 (11) , 5401-5407
Pelatihan Pemanfaatan Simulator Elektronika Online Untuk Perangkat Keras IoT Bagi Siswa SMK Yadika 13 Tambun
Pelatihan pemanfaatan simulator elektronika online Wokwi bertujuan untuk meningkatkan pemahaman dan keterampilan siswa SMK Yadika 13 Tambun dalam bidang elektronika dan Internet of Things (IoT). Pelatihan ini dirancang untuk mengintegrasikan konsep teori dengan praktik, memungkinkan siswa memahami penerapan teknologi IoT dalam kehidupan nyata. Metode yang digunakan adalah metode pembelajaran terintegrasi, yang menggabungkan ceramah interaktif, simulasi praktis, dan diskusi berbasis kasus. Pelaksanaan pelatihan melibatkan lima dosen dari Program Studi Teknik Elektro Universitas Gunadarma, dengan fokus pada pengenalan simulator Wokwi, praktik perancangan rangkaian elektronik sederhana, serta pengembangan proyek IoT berbasis sistem tertanam. Hasil pelatihan menunjukkan keberhasilan dalam meningkatkan pemahaman dan keterampilan siswa, dengan sebagian besar peserta mampu mendesain rangkaian logika secara mandiri dan memahami konsep kerja komponen IoT. Diskusi berbasis kasus juga memicu antusiasme siswa, menghasilkan ide-ide inovatif untuk penerapan teknologi IoT. Kesimpulannya, pelatihan ini memberikan dampak positif yang signifikan terhadap kemampuan teknis siswa dan diharapkan dapat menjadi model kegiatan berkelanjutan dalam mendukung pendidikan vokasi di bidang elektronika dan IoT.
- 1 January 2025
- Published by PT. Amirul Bangun Bangsa in Jurnal Pengabdian Masyarakat Bangsa
- Vol. 2 (11) , 5401-5407
Open AccessPelatihan Pemanfaatan Simulator Elektronika Online Untuk Perangkat Keras IoT Bagi Siswa SMK Yadika 13 Tambun
Pelatihan pemanfaatan simulator elektronika online Wokwi bertujuan untuk meningkatkan pemahaman dan keterampilan siswa SMK Yadika 13 Tambun dalam bidang elektronika dan Internet of Things (IoT). Pelatihan ini dirancang untuk mengintegrasikan konsep teori dengan praktik, memungkinkan siswa memahami penerapan teknologi IoT dalam kehidupan nyata. Metode yang digunakan adalah metode pembelajaran terintegrasi, yang menggabungkan ceramah interaktif, simulasi praktis, dan diskusi berbasis kasus. Pelaksanaan pelatihan melibatkan lima dosen dari Program Studi Teknik Elektro Universitas Gunadarma, dengan fokus pada pengenalan simulator Wokwi, praktik perancangan rangkaian elektronik sederhana, serta pengembangan proyek IoT berbasis sistem tertanam. Hasil pelatihan menunjukkan keberhasilan dalam meningkatkan pemahaman dan keterampilan siswa, dengan sebagian besar peserta mampu mendesain rangkaian logika secara mandiri dan memahami konsep kerja komponen IoT. Diskusi berbasis kasus juga memicu antusiasme siswa, menghasilkan ide-ide inovatif untuk penerapan teknologi IoT. Kesimpulannya, pelatihan ini memberikan dampak positif yang signifikan terhadap kemampuan teknis siswa dan diharapkan dapat menjadi model kegiatan berkelanjutan dalam mendukung pendidikan vokasi di bidang elektronika dan IoT.
- Open Access
- 17 July 2024
- Published by Universitas Gadjah Mada in Jurnal Nasional Teknik Elektro dan Teknologi Informasi
- Vol. 13 (3) , 186-194
Securing RFID in IoT Networks With Lightweight AES and ECDH Cryptography Approach
Radio frequency identification (RFID) technology integrated into the Internet of things (IoT) networks often poses security and privacy concerns due to its attack vulnerability. This research proposed a lightweight cryptographic model tailored for implementation in resource-constrained environments. The objective is to address security challenges while accommodating limited memory, power, and size requirements. A combined modified 126-bit Advanced Encryption Standard (AES) algorithm with a 256-bit elliptic curve Diffie-Hellman (ECDH) cryptographic key was utilized to develop lightweight cryptography for securing RFID data. The implementation used the Python programming language in Jupyter Notebook, with RFID operating at 13.56 Mhz. The methodology involved retrieving RFID data through additional programs and equalizing ECDH keys for encryption and decryption. Encryption and decryption testing demonstrated a high success rate, achieving an accuracy of 99.9%. The first encryption attempt required 85.125 ms, with the second attempt completed faster at 65.95 ms, showcasing improved efficiency. File encryption sizes averaged 29.875 bytes for the initial attempt and 30.1 bytes for the subsequent one. This research was limited to algorithm evaluation and had not been implemented in hardware. However, the proposed hybrid cryptography offers significant benefits for maintaining the confidentiality of RFID data within IoT environments. Rapid, efficient, and compact encryption of unique identifier (UID) data ensures enhanced security, thereby addressing critical concerns associated with RFID-enabled IoT networks.
- 17 July 2024
- Published by Universitas Gadjah Mada in Jurnal Nasional Teknik Elektro dan Teknologi Informasi
- Vol. 13 (3) , 186-194
Open AccessSecuring RFID in IoT Networks With Lightweight AES and ECDH Cryptography Approach
Radio frequency identification (RFID) technology integrated into the Internet of things (IoT) networks often poses security and privacy concerns due to its attack vulnerability. This research proposed a lightweight cryptographic model tailored for implementation in resource-constrained environments. The objective is to address security challenges while accommodating limited memory, power, and size requirements. A combined modified 126-bit Advanced Encryption Standard (AES) algorithm with a 256-bit elliptic curve Diffie-Hellman (ECDH) cryptographic key was utilized to develop lightweight cryptography for securing RFID data. The implementation used the Python programming language in Jupyter Notebook, with RFID operating at 13.56 Mhz. The methodology involved retrieving RFID data through additional programs and equalizing ECDH keys for encryption and decryption. Encryption and decryption testing demonstrated a high success rate, achieving an accuracy of 99.9%. The first encryption attempt required 85.125 ms, with the second attempt completed faster at 65.95 ms, showcasing improved efficiency. File encryption sizes averaged 29.875 bytes for the initial attempt and 30.1 bytes for the subsequent one. This research was limited to algorithm evaluation and had not been implemented in hardware. However, the proposed hybrid cryptography offers significant benefits for maintaining the confidentiality of RFID data within IoT environments. Rapid, efficient, and compact encryption of unique identifier (UID) data ensures enhanced security, thereby addressing critical concerns associated with RFID-enabled IoT networks.
- Open Access
- 5 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 22978-22990
Experimental Visualization of the LoRaWAN Variable Correlation in Jakarta
This paper presents an experimental study on the performance of LoRaWAN, a wireless communication protocol capable of transmitting data over long distances with low power consumption and low cost. The study aims to understand the relationship between transmission and connectivity in the context of LoRaWAN. Previous studies on LoRaWAN have not explored the impact of variables such as building height, elevation above sea level (MASL), drive test elevation, gateway elevation, drive test distance, signal-to-noise ratio (SNR), and Received Signal Strength Indicator (RSSI) on the coverage status based on free space loss. Therefore, this research conducted experiments using drive test devices (K02188, K02204, and K02205) to investigate the influence of these variables on the performance of LoRaWAN. The experimental results include log data and historical data, demonstrating the reliability of LoRaWAN technology in open space. The RSSI measurements, which represent the signal strength, range from around -127 dB to 60 dB, with an average SNR of 7 dB. The coverage status is classified into different categories, including Excellent (12.55%), Acceptable (16.57%), Good (19.86%), Poor (23.98%), and Very Poor (27.01%). The correlation variable analysis reveals that the coverage status is highly correlated with the independent variables. These findings provide valuable insights into the performance and reliability of LoRaWAN in open spaces, and the correlation variables shed light on the factors influencing the coverage status.
- 5 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 22978-22990
Open AccessExperimental Visualization of the LoRaWAN Variable Correlation in Jakarta
This paper presents an experimental study on the performance of LoRaWAN, a wireless communication protocol capable of transmitting data over long distances with low power consumption and low cost. The study aims to understand the relationship between transmission and connectivity in the context of LoRaWAN. Previous studies on LoRaWAN have not explored the impact of variables such as building height, elevation above sea level (MASL), drive test elevation, gateway elevation, drive test distance, signal-to-noise ratio (SNR), and Received Signal Strength Indicator (RSSI) on the coverage status based on free space loss. Therefore, this research conducted experiments using drive test devices (K02188, K02204, and K02205) to investigate the influence of these variables on the performance of LoRaWAN. The experimental results include log data and historical data, demonstrating the reliability of LoRaWAN technology in open space. The RSSI measurements, which represent the signal strength, range from around -127 dB to 60 dB, with an average SNR of 7 dB. The coverage status is classified into different categories, including Excellent (12.55%), Acceptable (16.57%), Good (19.86%), Poor (23.98%), and Very Poor (27.01%). The correlation variable analysis reveals that the coverage status is highly correlated with the independent variables. These findings provide valuable insights into the performance and reliability of LoRaWAN in open spaces, and the correlation variables shed light on the factors influencing the coverage status.
- Open Access
- 2 February 2024
- Published by Universitas Muhammadiyah Malang in Kinetik: Game Technology, Information System, Computer Network, Computing, Electronics, and Control
Comparison between Power Dissipation and Propagation Delay on 6T SRAM Cell Design Using GDI Logic with Transmission Gate VMSA and Voltage Divider
The rapid evolution of the semiconductor industry has witnessed shrinking portable and mobile devices alongside an increasing demand for extended battery life. Addressing the critical challenges of speed and battery life in digital devices, this paper investigated the effectiveness of innovative low-power design techniques. Focusing on the Gate Diffusion Input (GDI) approach, a recent advancement in the field, a comprehensive analysis revealed its significant potential for reducing power consumption in digital circuits. Additionally, a comparative analysis was conducted to evaluate the performance of conventional 6T GDI SRAM cells and their Modified 6T GDI SRAM with Voltage Divider, considering the influence of Sense Amplifiers. Simulation data demonstrated that Modified 6T SRAM designs, particularly the Voltage Divider and TGVMSA variants, achieved significantly lower power dissipation and delay despite having a larger cell area. Remarkably, the proposed design substantially improved power dissipation and propagation delay, achieving 1.3 ps, and 889.41mV at 1.8V shows that the suggested design enhances power dissipation and propagation delay. These findings suggest that the proposed design offers a promising strategy for enhancing power efficiency and performance in digital devices, thereby mitigating the limitations of battery life and speed in the modern technological landscape.
- 2 February 2024
- Published by Universitas Muhammadiyah Malang in Kinetik: Game Technology, Information System, Computer Network, Computing, Electronics, and Control
Open AccessComparison between Power Dissipation and Propagation Delay on 6T SRAM Cell Design Using GDI Logic with Transmission Gate VMSA and Voltage Divider
The rapid evolution of the semiconductor industry has witnessed shrinking portable and mobile devices alongside an increasing demand for extended battery life. Addressing the critical challenges of speed and battery life in digital devices, this paper investigated the effectiveness of innovative low-power design techniques. Focusing on the Gate Diffusion Input (GDI) approach, a recent advancement in the field, a comprehensive analysis revealed its significant potential for reducing power consumption in digital circuits. Additionally, a comparative analysis was conducted to evaluate the performance of conventional 6T GDI SRAM cells and their Modified 6T GDI SRAM with Voltage Divider, considering the influence of Sense Amplifiers. Simulation data demonstrated that Modified 6T SRAM designs, particularly the Voltage Divider and TGVMSA variants, achieved significantly lower power dissipation and delay despite having a larger cell area. Remarkably, the proposed design substantially improved power dissipation and propagation delay, achieving 1.3 ps, and 889.41mV at 1.8V shows that the suggested design enhances power dissipation and propagation delay. These findings suggest that the proposed design offers a promising strategy for enhancing power efficiency and performance in digital devices, thereby mitigating the limitations of battery life and speed in the modern technological landscape.