Tianbao Huo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Tianbao Huo has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Yi He
Lanzhou Jiaotong University
8 shared publications - Lifeng Zhang
School of Civil Engineering, Lanzhou University of Technology
5 shared publications - Jiapeng Tang
Faculty of Geomatics, Lanzhou Jiaotong University, Lanzhou, China
4 shared publications - Qing Zhang
Faculty of Geomatics, Lanzhou Jiaotong University, Lanzhou, China
4 shared publications - Wang Yang
Faculty of Geomatics, Lanzhou Jiaotong University, Lanzhou, China
4 shared publications Yunhao Zhang
Faculty of Geomatics, Lanzhou Jiaotong University, Lanzhou, China
4 shared publications
Latest Publications
- Open Access
- 2 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 19 (19391404) , 8878-8897
InSAR Deformation Analysis and Response Mechanism of Retrogressive Thaw Slumps in Permafrost Region of the Qinghai–Tibet Engineering Corridor
Amid global climate warming, retrogressive thaw slumps (RTSs) are increasing, posing significant risks to regional ecosystems and permafrost infrastructure. However, RTS’s spatiotemporal evolution and triggering mechanisms along the Qinghai–Tibet Engineering Corridor (QTEC) remain poorly quantified. Here, we employ small baseline subset Interferometric Synthetic Aperture Radar (InSAR) to monitor surface deformation in the CHU RA MA HE–Wuli section from 7 Sep. 2019 to 29 Jul. 2022, and construct a multifactor causal network based on the convergent cross mapping (CCM) model. Combining InSAR deformation monitoring with optical remote sensing, we identified 238 RTSs, primarily in hilly and piedmont regions with gentle slopes (3°–6°). Spatially, deformation initiates at the headwall, while temporally, they follow cyclic thaw subsidence and frost heave, showing a delayed response to climate changes and a strong correlation with vegetation, leading to stepwise subsidence. The causal network shows that on shady slopes, land surface temperature (LST), precipitation (PRE), and normalized difference vegetation index (NDVI) exert comparable influences, whereas on sunny slopes, PRE dominates. Feedbacks between RTS deformation and LST vary with aspect, while PRE and NDVI exhibit temporal-scale separation. These findings offer valuable insights for hazard risk assessment and sustainable development along the QTEC.
- 2 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 19 (19391404) , 8878-8897
Open AccessInSAR Deformation Analysis and Response Mechanism of Retrogressive Thaw Slumps in Permafrost Region of the Qinghai–Tibet Engineering Corridor
Amid global climate warming, retrogressive thaw slumps (RTSs) are increasing, posing significant risks to regional ecosystems and permafrost infrastructure. However, RTS’s spatiotemporal evolution and triggering mechanisms along the Qinghai–Tibet Engineering Corridor (QTEC) remain poorly quantified. Here, we employ small baseline subset Interferometric Synthetic Aperture Radar (InSAR) to monitor surface deformation in the CHU RA MA HE–Wuli section from 7 Sep. 2019 to 29 Jul. 2022, and construct a multifactor causal network based on the convergent cross mapping (CCM) model. Combining InSAR deformation monitoring with optical remote sensing, we identified 238 RTSs, primarily in hilly and piedmont regions with gentle slopes (3°–6°). Spatially, deformation initiates at the headwall, while temporally, they follow cyclic thaw subsidence and frost heave, showing a delayed response to climate changes and a strong correlation with vegetation, leading to stepwise subsidence. The causal network shows that on shady slopes, land surface temperature (LST), precipitation (PRE), and normalized difference vegetation index (NDVI) exert comparable influences, whereas on sunny slopes, PRE dominates. Feedbacks between RTS deformation and LST vary with aspect, while PRE and NDVI exhibit temporal-scale separation. These findings offer valuable insights for hazard risk assessment and sustainable development along the QTEC.
- Open Access
- 29 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 18 (19391404) , 23107-23132
A BiGRU-Based Spatiotemporal Prediction Method for Surface Displacement in Coal Mining Areas Considering Multiscale Seasonal Characteristics
Accurate prediction of surface displacement in coal mining areas is essential for enabling intelligent early warning systems and effective risk mitigation of mining-induced geological hazards. However, current deep learning models often fall short in capturing the complex and dynamic characteristics associated with seasonal displacement patterns. To address this limitation, this study presents a BiGRU-based spatiotemporal prediction framework that incorporates multi-scale seasonal features, aiming to enhance displacement forecasting accuracy in coal mining regions. The proposed approach begins by integrating the time series decomposition module from the Autoformer model to separate InSAR-derived displacement sequences into trend and seasonal components, thereby enabling targeted modeling of long-term trends and periodic fluctuations. Given the complex periodic structures and nonlinear volatility exhibited by the seasonal component, a multi-scale feature generation strategy is employed to extract both short-term (micro-scale) and long-term (macro-scale) fluctuation patterns. These features are then fused to construct composite input representations that reflect complex spatiotemporal evolution patterns, thereby improving the model capacity to capture seasonal variability. For the trend component, an autoregressive integrated moving average (ARIMA) model is utilized owing to its characteristics. In contrast, the BiGRU model is adopted for the seasonal component to learn nonlinear and intricate temporal features. The proposed method is validated using two representative mining sites with distinctly different operational histories. Experimental results demonstrate that the method achieves robust predictive performance across displacement scenarios with substantial variation, yielding reductions of at least 30.2% in MAE, 6.8% in RMSE, and 29.8% in MAPE. This work demonstrates the ability of the model to capture complex spatiotemporal dynamics in seasonal displacement, offering a promising solution for high-precision displacement prediction that supports real-time mine monitoring and risk management.
- 29 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 18 (19391404) , 23107-23132
Open AccessA BiGRU-Based Spatiotemporal Prediction Method for Surface Displacement in Coal Mining Areas Considering Multiscale Seasonal Characteristics
Accurate prediction of surface displacement in coal mining areas is essential for enabling intelligent early warning systems and effective risk mitigation of mining-induced geological hazards. However, current deep learning models often fall short in capturing the complex and dynamic characteristics associated with seasonal displacement patterns. To address this limitation, this study presents a BiGRU-based spatiotemporal prediction framework that incorporates multi-scale seasonal features, aiming to enhance displacement forecasting accuracy in coal mining regions. The proposed approach begins by integrating the time series decomposition module from the Autoformer model to separate InSAR-derived displacement sequences into trend and seasonal components, thereby enabling targeted modeling of long-term trends and periodic fluctuations. Given the complex periodic structures and nonlinear volatility exhibited by the seasonal component, a multi-scale feature generation strategy is employed to extract both short-term (micro-scale) and long-term (macro-scale) fluctuation patterns. These features are then fused to construct composite input representations that reflect complex spatiotemporal evolution patterns, thereby improving the model capacity to capture seasonal variability. For the trend component, an autoregressive integrated moving average (ARIMA) model is utilized owing to its characteristics. In contrast, the BiGRU model is adopted for the seasonal component to learn nonlinear and intricate temporal features. The proposed method is validated using two representative mining sites with distinctly different operational histories. Experimental results demonstrate that the method achieves robust predictive performance across displacement scenarios with substantial variation, yielding reductions of at least 30.2% in MAE, 6.8% in RMSE, and 29.8% in MAPE. This work demonstrates the ability of the model to capture complex spatiotemporal dynamics in seasonal displacement, offering a promising solution for high-precision displacement prediction that supports real-time mine monitoring and risk management.
- Open Access
- 26 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 18 (19391404) , 9297-9320
InSAR-Based Surface Deformation Analysis and Trend Prediction in Permafrost Areas Along the Qinghai-Tibet Railway Using Sentinel-1A and Environmental Factors
Global warming is accelerating the permafrost degradation along the Qinghai-Tibet Railway (QTR), causing the surface deformation (SD) of the railway subgrade. Especially in the Salt Lake to Wuli section of the QTR, the permafrost is widely distributed, and the SD has been the most serious. However, the spatio-temporal characteristics and mechanism of SD are still unclear. In addition, it is very important to predict the future trend of SD. Therefore, we acquired time series SD results from 2019 to 2022 based on Small Baseline Subset Interferometric Synthetic Aperture Radar (SBAS-InSAR) and analyzed the spatio-temporal characteristics and mechanism of SD in the Salt Lake to Wuli section. Subsequently, the EnvCA-GRU model for SD prediction was developed, integrating the Multi-Head Cross-Attention (MHCA) mechanism and Gated Recurrent Unit (GRU) to account for changes in environmental factors (EFs). The model was then employed to forecast SD trends over the next two years. Our results showed that the SD was uneven in the Salt Lake to Wuli section of the QTR from 2019 to 2022, there were six typical deformation areas, and the maximum cumulative ground subsidence reached 126.79 mm. The SD velocity of the sunny slope was higher than that of the shady slope, and the closer to the QTR, the greater the ground subsidence. Land surface temperature (LST), normalized difference vegetation index (NDVI), and precipitation are the main factors affecting SD. Our proposed EnvCA-GRU prediction model fusing NDVI, LST, and precipitation showed an RMSE of 0.153 and an R² of 0.991, the proposed model was reliable. The maximum cumulative ground subsidence of six typical areas by July 2024 reached 177.52, 268.08, 287.73, 270.99, 190.70, and 211.89 mm, respectively. The results of this study can play a guiding role in the early warning and mitigation of ground subsidence disasters along the QTR.
- 26 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 18 (19391404) , 9297-9320
Open AccessInSAR-Based Surface Deformation Analysis and Trend Prediction in Permafrost Areas Along the Qinghai-Tibet Railway Using Sentinel-1A and Environmental Factors
Global warming is accelerating the permafrost degradation along the Qinghai-Tibet Railway (QTR), causing the surface deformation (SD) of the railway subgrade. Especially in the Salt Lake to Wuli section of the QTR, the permafrost is widely distributed, and the SD has been the most serious. However, the spatio-temporal characteristics and mechanism of SD are still unclear. In addition, it is very important to predict the future trend of SD. Therefore, we acquired time series SD results from 2019 to 2022 based on Small Baseline Subset Interferometric Synthetic Aperture Radar (SBAS-InSAR) and analyzed the spatio-temporal characteristics and mechanism of SD in the Salt Lake to Wuli section. Subsequently, the EnvCA-GRU model for SD prediction was developed, integrating the Multi-Head Cross-Attention (MHCA) mechanism and Gated Recurrent Unit (GRU) to account for changes in environmental factors (EFs). The model was then employed to forecast SD trends over the next two years. Our results showed that the SD was uneven in the Salt Lake to Wuli section of the QTR from 2019 to 2022, there were six typical deformation areas, and the maximum cumulative ground subsidence reached 126.79 mm. The SD velocity of the sunny slope was higher than that of the shady slope, and the closer to the QTR, the greater the ground subsidence. Land surface temperature (LST), normalized difference vegetation index (NDVI), and precipitation are the main factors affecting SD. Our proposed EnvCA-GRU prediction model fusing NDVI, LST, and precipitation showed an RMSE of 0.153 and an R² of 0.991, the proposed model was reliable. The maximum cumulative ground subsidence of six typical areas by July 2024 reached 177.52, 268.08, 287.73, 270.99, 190.70, and 211.89 mm, respectively. The results of this study can play a guiding role in the early warning and mitigation of ground subsidence disasters along the QTR.
- Open Access
- 13 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 18 (19391404) , 6584-6599
A Synergistic CNN-DF Method for Landslide Susceptibility Assessment
The complex structures and intricate hyperparameters of existing deep learning (DL) models make achieving higher accuracy in landslide susceptibility assessment (LSA) time-consuming and labor-intensive. Deep forest (DF) is a decision tree-based DL framework that uses a cascade structure to process features, with model depth adapting to the input data. To explore a more ideal landslide susceptibility model, this study designed a landslide susceptibility model combining convolutional neural networks (CNNs) and DF, referred to as CNN-DF. The Bailong River Basin, a region severely affected by landslides, was chosen as the study area. First, the landslide inventory and influencing factors of the study area were obtained. Second, an equal number of landslide and nonlandslide samples were selected under similar environmental constraints to establish the dataset. Third, CNN was used to extract high-level features from the raw data, which were then input into the DF model for training and testing. Finally, the trained model was used to predict landslide susceptibility. The results showed that the CNN-DF model achieved high prediction accuracy, with an AUC of 0.9061 on the testing set, outperforming DF, CNN, and other commonly used machine learning models. In landslide susceptibility maps (LSMs), the proportion of historical landslides in the very high susceptibility category of CNN-DF was also higher than that of other models. CNN-DF is feasible for LSA, offering higher efficiency and more accurate results. In addition, the SHAP algorithm was used to quantify the contribution of features to the prediction results both globally and locally, further explaining the model. The LSM based on CNN-DF can provide a scientific basis for landslide prevention and disaster management in the target area.
- 13 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 18 (19391404) , 6584-6599
Open AccessA Synergistic CNN-DF Method for Landslide Susceptibility Assessment
The complex structures and intricate hyperparameters of existing deep learning (DL) models make achieving higher accuracy in landslide susceptibility assessment (LSA) time-consuming and labor-intensive. Deep forest (DF) is a decision tree-based DL framework that uses a cascade structure to process features, with model depth adapting to the input data. To explore a more ideal landslide susceptibility model, this study designed a landslide susceptibility model combining convolutional neural networks (CNNs) and DF, referred to as CNN-DF. The Bailong River Basin, a region severely affected by landslides, was chosen as the study area. First, the landslide inventory and influencing factors of the study area were obtained. Second, an equal number of landslide and nonlandslide samples were selected under similar environmental constraints to establish the dataset. Third, CNN was used to extract high-level features from the raw data, which were then input into the DF model for training and testing. Finally, the trained model was used to predict landslide susceptibility. The results showed that the CNN-DF model achieved high prediction accuracy, with an AUC of 0.9061 on the testing set, outperforming DF, CNN, and other commonly used machine learning models. In landslide susceptibility maps (LSMs), the proportion of historical landslides in the very high susceptibility category of CNN-DF was also higher than that of other models. CNN-DF is feasible for LSA, offering higher efficiency and more accurate results. In addition, the SHAP algorithm was used to quantify the contribution of features to the prediction results both globally and locally, further explaining the model. The LSM based on CNN-DF can provide a scientific basis for landslide prevention and disaster management in the target area.
- Open Access
- 16 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 17 (19391404) , 14848-14861
GLER-BiGRUnet: A Surface Deformation Prediction Model Fusing Multiscale Features of InSAR Deformation Information and Environmental Factors
Accurate surface deformation (SD) predictions are critical for early warning and timely remediation of infrastructure damage. However, the current SD prediction models do not integrate the multi-scale features of InSAR SD and environmental factors (EFs), which makes their prediction results inaccurate. To address this limitations, we proposed a bi-directional gated recurrent unit (BiGRU) multi-output SD prediction network (GLER-BiGRUnet), which mainly included global-local feature extraction (GLFE), multi-factor cross-attention residual (MCAR) and local residual module embedded in self-attention mechanism (RCSA) modules. Specifically, Dense and Conv1D were concatenated in the GLFE module to extract global-local SD features. The long time-series dependence between EFs and SD was learned in the MCAR module using the Multi-head cross attention (MHCA) mechanism to obtain the corresponding attention weight feature matrix. The residual connection and self-attention (SA) mechanisms were used in the RCSA module to merge the multi-scale features and enhance the model fitting ability. We chose four typical regions in the permafrost area of Qinghai-Tibet Railway (QTR) as the scene for the experiment. The spatial distribution and local profile exhibited relatively small discrepancies between the prediction results of the GLER-BiGRUnet model and the InSAR SD. Meanwhile, the average RMSE of the GLER-BiGRUnet model in the four typical regions was 0.19 mm, and the proposed model had the best evaluation index compared with other SD prediction models. Additionally, the prediction trend of SD of the proposed GLER-BiGRUnet model was consistent with the original InSAR SD, and the prediction results were more stable than those of other prediction models. The SD prediction model proposed in this paper contributes to early warning of surface deformation.
- 16 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 17 (19391404) , 14848-14861
Open AccessGLER-BiGRUnet: A Surface Deformation Prediction Model Fusing Multiscale Features of InSAR Deformation Information and Environmental Factors
Accurate surface deformation (SD) predictions are critical for early warning and timely remediation of infrastructure damage. However, the current SD prediction models do not integrate the multi-scale features of InSAR SD and environmental factors (EFs), which makes their prediction results inaccurate. To address this limitations, we proposed a bi-directional gated recurrent unit (BiGRU) multi-output SD prediction network (GLER-BiGRUnet), which mainly included global-local feature extraction (GLFE), multi-factor cross-attention residual (MCAR) and local residual module embedded in self-attention mechanism (RCSA) modules. Specifically, Dense and Conv1D were concatenated in the GLFE module to extract global-local SD features. The long time-series dependence between EFs and SD was learned in the MCAR module using the Multi-head cross attention (MHCA) mechanism to obtain the corresponding attention weight feature matrix. The residual connection and self-attention (SA) mechanisms were used in the RCSA module to merge the multi-scale features and enhance the model fitting ability. We chose four typical regions in the permafrost area of Qinghai-Tibet Railway (QTR) as the scene for the experiment. The spatial distribution and local profile exhibited relatively small discrepancies between the prediction results of the GLER-BiGRUnet model and the InSAR SD. Meanwhile, the average RMSE of the GLER-BiGRUnet model in the four typical regions was 0.19 mm, and the proposed model had the best evaluation index compared with other SD prediction models. Additionally, the prediction trend of SD of the proposed GLER-BiGRUnet model was consistent with the original InSAR SD, and the prediction results were more stable than those of other prediction models. The SD prediction model proposed in this paper contributes to early warning of surface deformation.
- Open Access
- 2 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 17 (19391404) , 14556-14574
A Graph–Transformer Method for Landslide Susceptibility Mapping
Landslide susceptibility mapping (LSM) is of great significance for regional land resource planning and disaster prevention and reduction. The machine learning (ML) method has been widely used in the field of LSM. However, the existing LSM model fails to consider the correlation between landslide and disaster-prone environment (DPE) and lacks global information, resulting in a high false alarm rate of LSM. Therefore, we propose an LSM method with GraphTransformer that considers the DPE characteristics and global information. Firstly, correlation analysis and importance analysis are employed on nine landslide contributing factors (LCFs), and the landslide dataset is generated by combining remote sensing image interpretation and field verification. Secondly, a graph constrained by environment similarity relationship is constructed to realize the correlation between landslide and DPE. Then, the Transformer module is introduced to construct a Graph-Transformer model that considers the global information. Finally, the LSM is generated and analyzed, and the accuracy of the proposed model is compared and evaluated. The experimental results show that the environment similarity relationship graph effectively improves the accuracy of the models and weakens the influence of environmental differences on the models. Compared with graph convolutional network (GCN), graph sample and aggregate (GraphSAGE), and graph attention network (GAT) models, the AUC value of the proposed model is more than 2.05% higher under the environment similarity relationship. In addition, the AUC value of the proposed model is more than 8.8% higher than that of traditional ML models. In conclusion, our proposed model framework can get better evaluation results than most existing methods, and its results can provide effective ways and key technical support for landslide disaster investigation and control
- 2 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 17 (19391404) , 14556-14574
Open AccessA Graph–Transformer Method for Landslide Susceptibility Mapping
Landslide susceptibility mapping (LSM) is of great significance for regional land resource planning and disaster prevention and reduction. The machine learning (ML) method has been widely used in the field of LSM. However, the existing LSM model fails to consider the correlation between landslide and disaster-prone environment (DPE) and lacks global information, resulting in a high false alarm rate of LSM. Therefore, we propose an LSM method with GraphTransformer that considers the DPE characteristics and global information. Firstly, correlation analysis and importance analysis are employed on nine landslide contributing factors (LCFs), and the landslide dataset is generated by combining remote sensing image interpretation and field verification. Secondly, a graph constrained by environment similarity relationship is constructed to realize the correlation between landslide and DPE. Then, the Transformer module is introduced to construct a Graph-Transformer model that considers the global information. Finally, the LSM is generated and analyzed, and the accuracy of the proposed model is compared and evaluated. The experimental results show that the environment similarity relationship graph effectively improves the accuracy of the models and weakens the influence of environmental differences on the models. Compared with graph convolutional network (GCN), graph sample and aggregate (GraphSAGE), and graph attention network (GAT) models, the AUC value of the proposed model is more than 2.05% higher under the environment similarity relationship. In addition, the AUC value of the proposed model is more than 8.8% higher than that of traditional ML models. In conclusion, our proposed model framework can get better evaluation results than most existing methods, and its results can provide effective ways and key technical support for landslide disaster investigation and control
- Open Access
- 21 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 17 (19391404) , 5443-5459
Thaw Slump Susceptibility Mapping Based on Sample Optimization and Ensemble Learning Techniques in Qinghai-Tibet Railway Corridor
Thaw slump susceptibility mapping (TSSM) of Qinghai-Tibet Railway corridor (QTRC) is the prerequisite and basis for disaster assessment and prevention of permafrost projects. The objective of this study is to construct ensemble learning models based on single classifier models to generate the TSSM of the QTRC, compare and verify the performance of the models, and further explore the relationship between the high susceptibility area and environmental factors of the QTRC. The collinearity analysis was carried out by selecting 14 thaw slump conditioning factors (TSCFs). We used the balance bagging method for sample optimization, and the data set was divided into 70% training set and 30% verification set. Convolutional neural network (CNN), multilayer perceptron (MLP), support vector regression (SVR), random forest (RF) single classifiers were selected to construct blending and stacking ensemble learning models for the TSSM. The results showed that there was no collinearity among the 14 TSCFS. The comparison of model performance revealed that all models had good performance, but the constructed stacking and blending ensemble learning models had stable performance and high prediction accuracy for TSSM. The stacking ensemble learning model had the best effect, and the area under curve (AUC) value of receiver operating characteristic (ROC) curve reached 0.9607. It showed that the generated TSSM of QTRC based on stacking ensemble learning model had the highest reliability. The QTRC has local areas with high thaw slump susceptibility, mainly concentrated in the permafrost areas with high altitude, high slope, adjacent faults, sparse vegetation, ice and snow and the more cumulative precipitation.
- 21 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 17 (19391404) , 5443-5459
Open AccessThaw Slump Susceptibility Mapping Based on Sample Optimization and Ensemble Learning Techniques in Qinghai-Tibet Railway Corridor
Thaw slump susceptibility mapping (TSSM) of Qinghai-Tibet Railway corridor (QTRC) is the prerequisite and basis for disaster assessment and prevention of permafrost projects. The objective of this study is to construct ensemble learning models based on single classifier models to generate the TSSM of the QTRC, compare and verify the performance of the models, and further explore the relationship between the high susceptibility area and environmental factors of the QTRC. The collinearity analysis was carried out by selecting 14 thaw slump conditioning factors (TSCFs). We used the balance bagging method for sample optimization, and the data set was divided into 70% training set and 30% verification set. Convolutional neural network (CNN), multilayer perceptron (MLP), support vector regression (SVR), random forest (RF) single classifiers were selected to construct blending and stacking ensemble learning models for the TSSM. The results showed that there was no collinearity among the 14 TSCFS. The comparison of model performance revealed that all models had good performance, but the constructed stacking and blending ensemble learning models had stable performance and high prediction accuracy for TSSM. The stacking ensemble learning model had the best effect, and the area under curve (AUC) value of receiver operating characteristic (ROC) curve reached 0.9607. It showed that the generated TSSM of QTRC based on stacking ensemble learning model had the highest reliability. The QTRC has local areas with high thaw slump susceptibility, mainly concentrated in the permafrost areas with high altitude, high slope, adjacent faults, sparse vegetation, ice and snow and the more cumulative precipitation.
- Open Access
- 23 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 17 (19391404) , 4139-4163
The Displacement Analysis and Prediction of a Creeping Ancient Landslide at Suoertou, Zhouqu County, China
The ancient Suoertou landslide seriously threatens the surrounding population's lives and property. Monitoring and predicting this landslide is crucial to ensure the affected areas’ safety. The previous research on the landslide's displacement characteristics and mechanisms has lacked detailed analyses. Additionally, its future development trends must be understood. Therefore, we conducted a detailed analysis of the ancient Suoertou landslide's displacement characteristics and mechanisms using small baseline subset interferometric synthetic aperture radar (SBAS-InSAR) monitoring results from 2018 to 2023. Furthermore, by applying a gated recurrent unit (GRU) prediction mode that incorporates the refined displacement characteristics and mechanisms, we forecasted the landslide's displacement trends. The results show that this landslide is currently undergoing overall slow displacement with violent fluctuations in localized areas. Tectonic movement, precipitation, human activities, river erosion, and other factors interact, forming a vicious development displacement mechanism. According to our prediction, the displacement of this landslide will be in a trend of fluctuating increase from June 2023 to June 2024. In particular, the local area will undergo abnormal displacement acceleration. The results of the current research provide a scientific basis upon which to monitor landslides, promote their management, and reduce the risk of losses due to landslide disasters.
- 23 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 17 (19391404) , 4139-4163
Open AccessThe Displacement Analysis and Prediction of a Creeping Ancient Landslide at Suoertou, Zhouqu County, China
The ancient Suoertou landslide seriously threatens the surrounding population's lives and property. Monitoring and predicting this landslide is crucial to ensure the affected areas’ safety. The previous research on the landslide's displacement characteristics and mechanisms has lacked detailed analyses. Additionally, its future development trends must be understood. Therefore, we conducted a detailed analysis of the ancient Suoertou landslide's displacement characteristics and mechanisms using small baseline subset interferometric synthetic aperture radar (SBAS-InSAR) monitoring results from 2018 to 2023. Furthermore, by applying a gated recurrent unit (GRU) prediction mode that incorporates the refined displacement characteristics and mechanisms, we forecasted the landslide's displacement trends. The results show that this landslide is currently undergoing overall slow displacement with violent fluctuations in localized areas. Tectonic movement, precipitation, human activities, river erosion, and other factors interact, forming a vicious development displacement mechanism. According to our prediction, the displacement of this landslide will be in a trend of fluctuating increase from June 2023 to June 2024. In particular, the local area will undergo abnormal displacement acceleration. The results of the current research provide a scientific basis upon which to monitor landslides, promote their management, and reduce the risk of losses due to landslide disasters.