Jianhong Zhai
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jianhong Zhai has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Quan Xue
South China University of Technology
4 shared publications - Yunfei Cao
South China University of Technology
4 shared publications - Wenquan Che
South China University of Technology
3 shared publications - Feng Du
Guangdong Provincial Key Laboratory of Millimeter-Wave and Terahertz, School of Electronic and Information Engineering, South China University of Technology, Guangzhou, China
1 shared publication - Wenjie Feng
South China University of Technology
1 shared publication - Xin Xiu
School of Electronic and Optical Engineering, Nanjing University of Posts and Telecommunications, Nanjing, China
1 shared publication
Latest Publications
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (9) , 3676-3680
Symmetric Millimeter-Wave Beam-Scanning Linear Slot Array With Wide Scanning Angle and Low Cross Polarization
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (9) , 3676-3680
Symmetric Millimeter-Wave Beam-Scanning Linear Slot Array With Wide Scanning Angle and Low Cross Polarization
- 10 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 74 (5) , 4926-4931
Dual-Band Shared-Aperture Base-Station Antenna Array Using Frequency-Selective Absorbers for Cross-Band Interference Mitigation
The paper proposes a dual-band shared-aperture antenna array using frequency-selective absorbers. In the proposed array, a lower-band (LB) ±45°-polarized dipole antenna is interlaced among four higher-band (HB) ±45°-polarized dipole antennas. To suppress the coupling effect of LB antenna on HB antennas, four Absorbers A are placed above the LB antenna. For the LB antenna, the Absorbers A can absorb the scattering wave from induced HB coupling current, but do not affect the in-band radiation. To mitigate the electromagnetic blockage effect, the LB radiators are designed to pass the HB electromagnetic wave. Each HB antenna element is surrounded by four Absorbers B for suppressing the resonance interference caused by the LB common-mode currents on the HB feeding baluns. Compared with previous works, the proposed array has wider LB of 1.4-2.2 GHz and HB of 3.8-5.2 GHz, higher cross-band isolation of over 33dB and stable radiation patterns. By virtue of the superior advantages, the proposed array is a good solution for multiband communication application scenarios.
- 10 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 74 (5) , 4926-4931
Dual-Band Shared-Aperture Base-Station Antenna Array Using Frequency-Selective Absorbers for Cross-Band Interference Mitigation
The paper proposes a dual-band shared-aperture antenna array using frequency-selective absorbers. In the proposed array, a lower-band (LB) ±45°-polarized dipole antenna is interlaced among four higher-band (HB) ±45°-polarized dipole antennas. To suppress the coupling effect of LB antenna on HB antennas, four Absorbers A are placed above the LB antenna. For the LB antenna, the Absorbers A can absorb the scattering wave from induced HB coupling current, but do not affect the in-band radiation. To mitigate the electromagnetic blockage effect, the LB radiators are designed to pass the HB electromagnetic wave. Each HB antenna element is surrounded by four Absorbers B for suppressing the resonance interference caused by the LB common-mode currents on the HB feeding baluns. Compared with previous works, the proposed array has wider LB of 1.4-2.2 GHz and HB of 3.8-5.2 GHz, higher cross-band isolation of over 33dB and stable radiation patterns. By virtue of the superior advantages, the proposed array is a good solution for multiband communication application scenarios.
- 14 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 24 (6) , 1547-1551
Millimeter-Wave Wide-Angle Beam-Scanning Phased Array Based on Full-Wavelength Slot Antenna Elements
The phased array with wide scanning range is significant to increase signal coverage for millimeter-wave communication. In this letter, a millimeter-wave wide-angle beam-scanning phased array based on crossed full-wavelength slot elements is presented. High-gain performance of full-wavelength slot elements are used to improve the array boresight gain. The proposed crossed slot antenna element has a pair of mirror symmetrical radiating full-wavelength slots. The crossed slot is designed with parallel arms to reduce element-to-element distance for the phased array. Furthermore, parasitic slots are loaded in the vicinity of outer elements of the array to increase the element beamwidth. Due to small element spacing and wide-beam characteristic of outer elements, the beam-scanning angle of the millimeter-wave array is enhanced substantially. As a result, simulated and measured results show that the proposed 1 × 8 phased array has scanning angles of ±80° with 4 dB scan loss in 26.0 GHz to 30.0 GHz. Compared with other related works, the proposed array has wider beam-scanning range with high gain and compact size.
- 14 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 24 (6) , 1547-1551
Millimeter-Wave Wide-Angle Beam-Scanning Phased Array Based on Full-Wavelength Slot Antenna Elements
The phased array with wide scanning range is significant to increase signal coverage for millimeter-wave communication. In this letter, a millimeter-wave wide-angle beam-scanning phased array based on crossed full-wavelength slot elements is presented. High-gain performance of full-wavelength slot elements are used to improve the array boresight gain. The proposed crossed slot antenna element has a pair of mirror symmetrical radiating full-wavelength slots. The crossed slot is designed with parallel arms to reduce element-to-element distance for the phased array. Furthermore, parasitic slots are loaded in the vicinity of outer elements of the array to increase the element beamwidth. Due to small element spacing and wide-beam characteristic of outer elements, the beam-scanning angle of the millimeter-wave array is enhanced substantially. As a result, simulated and measured results show that the proposed 1 × 8 phased array has scanning angles of ±80° with 4 dB scan loss in 26.0 GHz to 30.0 GHz. Compared with other related works, the proposed array has wider beam-scanning range with high gain and compact size.
- 25 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 72 (2) , 2001-2006
Cross-Band Decoupling Method for Dual-Band Aperture-Shared Antenna Array Using Metasurfaces
One method of using a metasurface to reduce the cross-band mutual interference of the dual-band aperture-shared antenna array is proposed. A base-station dual-band antenna array is designed to validate the method, and composed of a lower-band (LB) antenna element, 2×2 higher-band (HB) antenna elements and a metasurface. The metasurface exhibits the bandstop characteristic in the HB, and cancels the HB radiation from the LB antenna. Meanwhile, the metasurface absorbs part of the HB electromagnetic wave from the LB antenna. As a result, the mutual coupling between the LB and HB antennas is suppressed substantially. The metasurface causes little loss for the LB antenna. The dual-band aperture-shared antenna array covers the bands of 1.7-2.7 GHz (45.5%) and 3.3-3.8 GHz (14.1%). The simulated and measured results show that the proposed array has high port-to-port isolation, wide bandwidth and stable radiation pattern in both the LB and HB.
- 25 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 72 (2) , 2001-2006
Cross-Band Decoupling Method for Dual-Band Aperture-Shared Antenna Array Using Metasurfaces
One method of using a metasurface to reduce the cross-band mutual interference of the dual-band aperture-shared antenna array is proposed. A base-station dual-band antenna array is designed to validate the method, and composed of a lower-band (LB) antenna element, 2×2 higher-band (HB) antenna elements and a metasurface. The metasurface exhibits the bandstop characteristic in the HB, and cancels the HB radiation from the LB antenna. Meanwhile, the metasurface absorbs part of the HB electromagnetic wave from the LB antenna. As a result, the mutual coupling between the LB and HB antennas is suppressed substantially. The metasurface causes little loss for the LB antenna. The dual-band aperture-shared antenna array covers the bands of 1.7-2.7 GHz (45.5%) and 3.3-3.8 GHz (14.1%). The simulated and measured results show that the proposed array has high port-to-port isolation, wide bandwidth and stable radiation pattern in both the LB and HB.