Ibrahim Shaikh
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ibrahim Shaikh has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Abebe Alemu Wendimu
Department of Automation and Control Engineering, Faculty of Applied Informatics, Tomas Bata University in Zlín, nám. T. G. Masaryka 5555, 760 01 Zlín, Czech Republic
3 shared publications Radek Matušů
Department of Automation and Control Engineering, Faculty of Applied Informatics, Tomas Bata University in Zlín, Zlín, Czech Republic
3 shared publications- Radek Matušů
Department of Automation and Control Engineering, Faculty of Applied Informatics, Tomas Bata University in Zlín, nám. T. G. Masaryka 5555, 760 01 Zlín, Czech Republic
3 shared publications Abebe Alemu Wendimu
Department of Automation and Control Engineering, Faculty of Applied Informatics, Tomas Bata University in Zlín, Zlín, Czech Republic
2 shared publicationsEl Wardi Zerdazi
Tomas Bata University in Zlín
2 shared publications- Meron Tadele Roba
Department of Automation and Control Engineering, Faculty of Applied Informatics, Tomas Bata University in Zlín, nám. T. G. Masaryka 5555, 760 01 Zlín, Czech Republic
2 shared publications
Latest Publications
- Open Access
- 19 November 2026
- Published by MDPI AG in Fractal and Fractional
- Vol. 10 (11) , 819
Comparative Frequency and Time-Domain Evaluation of Rational Approximation Methods for Fractional-Order Systems
This paper presents a systematic comparative analysis of rational approximation methods for fractional-order systems, which are widely used to describe dynamics with memory and hereditary effects. Since fractional-order operators generally lead to irrational transfer functions, rational approximations are required for practical simulation, analysis, and implementation. Seven approximation methods are investigated, including Classical Oustaloup, Refined Oustaloup, Continued Fraction Expansion (CFE), Curve Fitting, Modified Stability Boundary Locus (M-SBL), Equal-Ripple, and Exact-Phase methods. The methods are evaluated using three representative test cases: a fundamental fractional-order operator, a higher-order fractional-order transfer function, and a fractional-order controller. Both frequency-domain characteristics and time-domain responses are examined using magnitude and phase RMSE, step-response RMSE, IAE, and ISE. The results show that approximation performance depends on both the approximation method and the type of fractional-order system. Refined Oustaloup generally provides close agreement with the reference model for the fundamental operator and higher-order transfer function, while the controller results show a different performance across the evaluated metrics. The findings demonstrate that no single method is universally optimalm and that both frequency- and time-domain evaluations are important for assessing rational approximation accuracy.
- 19 November 2026
- Published by MDPI AG in Fractal and Fractional
- Vol. 10 (11) , 819
Open AccessComparative Frequency and Time-Domain Evaluation of Rational Approximation Methods for Fractional-Order Systems
This paper presents a systematic comparative analysis of rational approximation methods for fractional-order systems, which are widely used to describe dynamics with memory and hereditary effects. Since fractional-order operators generally lead to irrational transfer functions, rational approximations are required for practical simulation, analysis, and implementation. Seven approximation methods are investigated, including Classical Oustaloup, Refined Oustaloup, Continued Fraction Expansion (CFE), Curve Fitting, Modified Stability Boundary Locus (M-SBL), Equal-Ripple, and Exact-Phase methods. The methods are evaluated using three representative test cases: a fundamental fractional-order operator, a higher-order fractional-order transfer function, and a fractional-order controller. Both frequency-domain characteristics and time-domain responses are examined using magnitude and phase RMSE, step-response RMSE, IAE, and ISE. The results show that approximation performance depends on both the approximation method and the type of fractional-order system. Refined Oustaloup generally provides close agreement with the reference model for the fundamental operator and higher-order transfer function, while the controller results show a different performance across the evaluated metrics. The findings demonstrate that no single method is universally optimalm and that both frequency- and time-domain evaluations are important for assessing rational approximation accuracy.
- Open Access
- 24 July 2026
- Published by MDPI AG in Engineering Proceedings
- Vol. 150 (1) , 76
Transient Numerical Simulation of Reheating Furnace Behavior for Continuous Casting Rail Steel Blooms Prior to Rolling
In this study a transient finite element model was developed to examine the temperature evolution of continuous casting blooms during reheating prior to rail rolling. The simulation was carried out using COMSOL Multiphysics 5.6, incorporating convective and radiative heat transfer mechanisms under a three-zone furnace (preheating, heating and soaking) temperature schedule. The temperature distribution and soaking uniformity were evaluated over a 7200 s heating cycle. The results indicate that proper adjustment of furnace setpoints enables the bloom center to reach approximately 1220 °C while maintaining acceptable temperature uniformity . This study shows how numerical modeling can be used to improve thermal homogeneity prior to hot rolling and optimize reheating furnace performance.- 24 July 2026
- Published by MDPI AG in Engineering Proceedings
- Vol. 150 (1) , 76
Open AccessTransient Numerical Simulation of Reheating Furnace Behavior for Continuous Casting Rail Steel Blooms Prior to Rolling
In this study a transient finite element model was developed to examine the temperature evolution of continuous casting blooms during reheating prior to rail rolling. The simulation was carried out using COMSOL Multiphysics 5.6, incorporating convective and radiative heat transfer mechanisms under a three-zone furnace (preheating, heating and soaking) temperature schedule. The temperature distribution and soaking uniformity were evaluated over a 7200 s heating cycle. The results indicate that proper adjustment of furnace setpoints enables the bloom center to reach approximately 1220 °C while maintaining acceptable temperature uniformity . This study shows how numerical modeling can be used to improve thermal homogeneity prior to hot rolling and optimize reheating furnace performance. - Open Access
- 9 May 2026
- Published by MDPI AG in Fractal and Fractional
- Vol. 10 (5) , 321
A Unified Comparative Framework for Fractional-Order Operator Approximation with Pareto-Based Analysis
Fractional-order operators play a fundamental role in the modeling and control of complex dynamical systems; however, their infinite-dimensional nature necessitates rational approximation for practical implementation. This paper presents a unified comparative framework for evaluating widely used approximation methods, including standard and refined Oustaloup filters, continued fraction expansion (CFE), Matsuda, curve-fitting, and modified stability boundary locus (M-SBL) approaches. A systematic evaluation methodology is developed to assess these methods based on frequency-domain accuracy, time-domain performance, and robustness. Furthermore, a Pareto-based multi-objective analysis is introduced to explicitly capture the trade-offs among conflicting performance criteria, enabling the identification of non-dominated solutions without relying on weighted-sum formulations. Extensive simulations are conducted over a wide frequency range to evaluate approximation accuracy and control-oriented performance. The results reveal that different methods exhibit distinct trade-offs between accuracy, robustness, and complexity. In particular, the Oustaloup and M-SBL approaches demonstrate strong overall performance across multiple criteria, while methods such as CFE and curve-fitting show limitations under wideband conditions. The proposed framework provides a systematic and reproducible basis for selecting appropriate approximation techniques in fractional-order control applications, offering valuable insights into their practical implementation and performance trade-offs.
- 9 May 2026
- Published by MDPI AG in Fractal and Fractional
- Vol. 10 (5) , 321
Open AccessA Unified Comparative Framework for Fractional-Order Operator Approximation with Pareto-Based Analysis
Fractional-order operators play a fundamental role in the modeling and control of complex dynamical systems; however, their infinite-dimensional nature necessitates rational approximation for practical implementation. This paper presents a unified comparative framework for evaluating widely used approximation methods, including standard and refined Oustaloup filters, continued fraction expansion (CFE), Matsuda, curve-fitting, and modified stability boundary locus (M-SBL) approaches. A systematic evaluation methodology is developed to assess these methods based on frequency-domain accuracy, time-domain performance, and robustness. Furthermore, a Pareto-based multi-objective analysis is introduced to explicitly capture the trade-offs among conflicting performance criteria, enabling the identification of non-dominated solutions without relying on weighted-sum formulations. Extensive simulations are conducted over a wide frequency range to evaluate approximation accuracy and control-oriented performance. The results reveal that different methods exhibit distinct trade-offs between accuracy, robustness, and complexity. In particular, the Oustaloup and M-SBL approaches demonstrate strong overall performance across multiple criteria, while methods such as CFE and curve-fitting show limitations under wideband conditions. The proposed framework provides a systematic and reproducible basis for selecting appropriate approximation techniques in fractional-order control applications, offering valuable insights into their practical implementation and performance trade-offs.
- Open Access
- 26 February 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Comprehensive identification and parametric uncertainty assessment in the dynamic modelling of a 3D crane system
This paper presents a detailed study of the dynamic modeling and parametric uncertainty analysis of a 3D crane system, providing insights into its positional and angular responses across varying operational conditions. Using real-world experimental data, the study identifies and quantifies key parameters, including system gains, time constants, and damping ratios. These parameters form the basis of a validated mathematical model that accurately reflects the crane’s dynamic behaviour under diverse Z-axis configurations and input conditions. The results demonstrate how payload height significantly affects both positional and angular dynamics, particularly revealing notable coupling effects between translational and rotational movements. Additionally, an asymmetric actuator dead-zone was experimentally observed and analysed to enhance the comprehensiveness of the system identification. A nonlinear state-space model and the manufacturer’s nominal linear translational model are used for comparison with the identified linear model. To the best of the authors’ knowledge, this is the first study to experimentally derive and quantify parametric uncertainties in a validated 3D crane system model, extending beyond existing literature, which often assumes fixed parameters or focuses on lower-dimensional models. The insights from this study establish a foundation for designing robust control strategies capable of handling the inherent variability and complexity of 3D crane systems. The findings have practical implications for industries requiring precise load handling and reliable operation under dynamic and uncertain conditions, such as construction, logistics, and automated systems.
- 26 February 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Open AccessComprehensive identification and parametric uncertainty assessment in the dynamic modelling of a 3D crane system
This paper presents a detailed study of the dynamic modeling and parametric uncertainty analysis of a 3D crane system, providing insights into its positional and angular responses across varying operational conditions. Using real-world experimental data, the study identifies and quantifies key parameters, including system gains, time constants, and damping ratios. These parameters form the basis of a validated mathematical model that accurately reflects the crane’s dynamic behaviour under diverse Z-axis configurations and input conditions. The results demonstrate how payload height significantly affects both positional and angular dynamics, particularly revealing notable coupling effects between translational and rotational movements. Additionally, an asymmetric actuator dead-zone was experimentally observed and analysed to enhance the comprehensiveness of the system identification. A nonlinear state-space model and the manufacturer’s nominal linear translational model are used for comparison with the identified linear model. To the best of the authors’ knowledge, this is the first study to experimentally derive and quantify parametric uncertainties in a validated 3D crane system model, extending beyond existing literature, which often assumes fixed parameters or focuses on lower-dimensional models. The insights from this study establish a foundation for designing robust control strategies capable of handling the inherent variability and complexity of 3D crane systems. The findings have practical implications for industries requiring precise load handling and reliable operation under dynamic and uncertain conditions, such as construction, logistics, and automated systems.
- Open Access
- 4 July 2025
- Published by Elsevier in Chemical Engineering Science
- Vol. 318
Steady and dynamic state simulation of a methanol continuous-flow laboratory reactor for process variable evaluation and event-based thermostat regulation
- 4 July 2025
- Published by Elsevier in Chemical Engineering Science
- Vol. 318
Open AccessSteady and dynamic state simulation of a methanol continuous-flow laboratory reactor for process variable evaluation and event-based thermostat regulation
- 17 October 2024
- Published by Springer Nature
- p. 536-549
Reduced-Order $H_{\infty }$ Loop-Shaping Controller Design for Nonlinear Continuous-Time HDD Systems Using Hankel-Norm Approximation- 17 October 2024
- Published by Springer Nature
- p. 536-549
Reduced-Order $H_{\infty }$ Loop-Shaping Controller Design for Nonlinear Continuous-Time HDD Systems Using Hankel-Norm Approximation- Open Access
- 12 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 111523-111534
H∞ Loop-Shaping Continuous-Time Controller Design for Nonlinear HDD Systems: A Reduced-Order Approach Using Hankel-Norm Approximation
This study presents the development and examination of a streamlined H ∞ loop-shaping continuous-time controller tailored for nonlinear Hard Disk Drive (HDD) systems. Using the Hankel-norm approximation technique, the complexity of the controller is systematically reduced, emphasizing preserving the system’s efficacy while enhancing computational efficiency. The dynamics of the HDD system and the performance of the proposed controller are investigated through MATLAB simulations. The effectiveness of the controller is quantitatively measured by employing the ITAE (Integral of Time multiplied by Absolute Error) criterion. The results indicate that a controller of the 10th-order provides a desirable compromise between maintaining robust control and minimizing disturbances and noise without significant loss in performance. This method illustrates the capacity for implementing more straightforward controllers in complex HDD systems, paving the way for their application in precision-critical industrial settings.
- 12 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 111523-111534
Open AccessH∞ Loop-Shaping Continuous-Time Controller Design for Nonlinear HDD Systems: A Reduced-Order Approach Using Hankel-Norm Approximation
This study presents the development and examination of a streamlined H ∞ loop-shaping continuous-time controller tailored for nonlinear Hard Disk Drive (HDD) systems. Using the Hankel-norm approximation technique, the complexity of the controller is systematically reduced, emphasizing preserving the system’s efficacy while enhancing computational efficiency. The dynamics of the HDD system and the performance of the proposed controller are investigated through MATLAB simulations. The effectiveness of the controller is quantitatively measured by employing the ITAE (Integral of Time multiplied by Absolute Error) criterion. The results indicate that a controller of the 10th-order provides a desirable compromise between maintaining robust control and minimizing disturbances and noise without significant loss in performance. This method illustrates the capacity for implementing more straightforward controllers in complex HDD systems, paving the way for their application in precision-critical industrial settings.
- 18 February 2024
- Published by Springer Nature
- p. 58-66
Robust $H_{\infty }$ Controller Design for Satellite Systems with Uncertain Inertia Matrix: A Linear Matrix Inequality Approach- 18 February 2024
- Published by Springer Nature
- p. 58-66
Robust $H_{\infty }$ Controller Design for Satellite Systems with Uncertain Inertia Matrix: A Linear Matrix Inequality Approach