JQJianhua Qiu

Jianhua Qiu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jianhua Qiu has a total of 84 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Interface Engineering of 2D MOF nanosheet/GO Rigid-Flexible Composite Membranes: High-Stability Ion Sieving and High-Permeance Water Treatment Performance

    by Yu Zhang, Zengqiang Wei, Shiyao Qiu, Shanshan Lu, Liping Jiang, Weiyi Li, Jianhua Qiu

    The safe disposal of radioactive wastewater presents a critical challenge to sustainable nuclear energy development, demanding efficient separation of low-concentration, long-lived anionic radionuclides (e.g., I-, SO42-). Conventional adsorption methods are compromised by competitive adsorption from divalent anions, while commercial development of ion-exchange and nanofiltration membranes is facing inherent conflicts in balancing selectivity, permeability, and long-term stability. In pursuit of solutions to these challenges, this study proposed to engineer a lamellar sieving membrane through hybridization of rigid amino-functionalized 2D Zn(BDC)-NH2 metal-organic framework (MOF) nanosheets with flexible graphene oxide (GO). In this design, low-aspect-ratio MOF nanosheets were leveraged to enhance the porosity and thereby shorten the mass-transfer pathways; hydrogen bonding from GO intercalation was exploited to improve the interfacial compatibility; vacuum filtration could be employed to achieve uniform assembly. This design yielded a membrane that achieved a SO42-/I- separation factor of 15 and water permeance of 161 L m-2 h-1 bar-1. The characterization results indicated that the 2D Zn(BDC)-NH2 nanosheets could expand the GO interlayer spacing to boost the water permeance, while generating uniform nanochannels for molecular sieving. This study offers an efficient pretreatment solution for radioactive wastewater, which is key to enhancing the subsequent adsorption efficiency.

  • Open Access

    Missing Evidence in Interfacial Polymerization: Challenges and Opportunities for In Situ Observation of Polyamide Membrane Formation

    by Haowen Wu, Jianhua Qiu, Hao Guo

    Polyamide (PA) thin-film composite membranes are the dominant platform for reverse osmosis and nanofiltration. However, despite decades of development, the dynamic formation process of PA layers during interfacial polymerization (IP) remains insufficiently understood. Existing mechanistic interpretations are largely based on retrospective relationship analyses of formed membrane nanostructure with certain IP reaction conditions rather than direct in situ observation of transient interfacial events. The ultrafast kinetics, nanoscale reaction zone, liquid–liquid interfacial environment, and highly nonequilibrium nature of IP make the in situ observation challenging. Herein, we critically examine the major mechanistic interpretations for the nanostructure formation of fully and semiaromatic PA, including convections, interfacial degassing, monomer eruption, reaction-diffusion, and water templating. Inconsistencies and limitations of these interpretations are briefly discussed, further driving the introduction of the progress and limitations of existing in situ IP observation techniques. Despite these techniques enabling in situ spatial or temporal characterization of PA formation during IP, they still lack high-resolution spatiotemporal monitoring and excellent compatibility with the susceptible liquid–liquid interface. To address these challenges, we further envision the next-generation in situ IP observation platform combining miniaturized IP reactors, controllable reaction initiation, and ultrafast vitrification function as inspired by the advanced time-resolved cryogenic electron microscopy in biological studies. This platform is expected to allow direct in situ characterization of the transient IP reaction stages, thereby improving the fundamental understanding of the rapid and dynamic formation of diverse PA nanostructures and thus guiding the rational design of high-performance PA membranes.

  • Decoupling the CT Paradigm in Membrane Chlorination: Equivalent Versus Inequivalent Impacts of Hypochlorite Concentration and Exposure Time on Contaminants Rejection

    by Wenhao Su, Keyu Yao, Jiaxing Li, Dingyu Xing, Jianhua Qiu, Wanbin Li, Hao Guo

    CT (i.e., hypochlorite concentration C × exposure time T) value, borrowed from water disinfection that assumes the equivalent contribution of C and T, is widely used to indicate membrane chlorination intensity. Although intentional chlorine treatment is commonly applied to polyamide nanofiltration membranes for surface modification or fouling control, whether C and T play equivalent roles in membrane rejection of diverse contaminants, such as per- and polyfluoroalkyl substances (PFASs), antibiotics, and endocrine disrupting compounds (EDCs), remains unclear. Herein, we investigated the impacts of C and T on contaminant rejection across CT values of 1000–20,000 ppm × h. Results reveal near-equivalent effects on the rejection of PFASs and antibiotics at low chlorination intensities (e.g., ≤ 2000 ppm × h), but significantly inequivalent impacts on the rejection of all contaminants at higher intensities (e.g., CT ≥ 10,000 ppm × h). High-C chlorination induced more severe polyamide degradation than long T chlorination, drastically compromising contaminant rejection (e.g., sulfadiazine rejection of 98.2% vs 59.3% for membranes chlorinated at 2000 ppm × 10 h and 20,000 ppm × 1 h, respectively). Based on these results, a conceptual framework was established to decouple the traditional CT paradigm, revealing the fundamental mechanisms of chlorination-induced changes in membrane rejection.


  • Open Access

    Pore engineering of Phenylboronic Covalent Organic Framework Membranes for Steviol Glycosides Separation

    by Shiyao Qiu, Yuqing Zhang, Haoyun Hu, Shanshan Lu, Yonggang Zhao, Sitong Lin, Xi-Jie Lin, Hao Guo, Liping Jiang, Jianhua Qiu

    Membrane separation offers high efficiency, environmental compatibility, and precise molecular-level discrimination, making it highly promising for the purification of steviol glycosides (SGs). However, the directional construction of high-permeance membranes that allow efficient SGs transmission remains challenging. To address these issues, we construct adsorption–diffusion functional sites within the well-defined nanochannels of the covalent organic framework (COF) membrane. The hydrophobic TAPB-TFB COF membrane from 1,3,5-tris(4-aminophenyl)benzene (TAPB) and 1,3,5-triformylbenzene (TFB), and the hydrophilic boronic-acid-functionalized TAPB-BuPa COF membrane from TAPB and 3,5-diformylphenylboronic acid (BuPa) were fabricated via liquid-liquid interfacial polymerization. The TAPB-TFB COF membrane exhibits an SG rejection of 45.31% and the permeance of 14.4 L m-2 h-1 bar-1. The TAPB-BuPa COF membrane creates a hydrophilic affinity microenvironment within its ordered nanochannels. Its pendant phenylboronic acid groups selectively form dynamic, reversible boronate ester bonds with the vicinal diol moieties of SGs. This specific interaction enables a hopping diffusion mechanism. As a result, the permeance increases 5-fold to 71.6 L m-2 h-1 bar-1, and a high SGs transmission of 78.1% is achieved. Elucidating this microenvironment-controlled switch from adsorption to diffusion provides a new paradigm for designing high-flux membranes tailored for natural product concentration.

  • Overlooked Role of Coulombic and Dipole–Surface Interactions in the Rejection of Polar Contaminants by Polyamide Membranes

    by Keyu Yao, Haowen Wu, Wenhao Su, Qi Shao, Li Long, Bing Li, Tingzheng Hou, Yan-Bing He, Jianhua Qiu, Hao Guo

    Size exclusion is commonly believed to be the major mechanism governing the rejection of antibiotics by nanofiltration (NF), while both size exclusion and Coulombic interactions affect the rejection of negatively charged polyfluoroalkyl substances (PFASs). Nevertheless, the potential interactions between polar antibiotics (e.g., zwitterionic fluoroquinolones and nonionized sulfonamides) and the membrane are often overlooked. Herein, this study identifies the key impacts of Coulombic and dipole–surface interactions in the rejection of polar antibiotics by polyamide NF membranes with various pore sizes and charges. Membranes with identical pore sizes yet different charges showed distinguished rejection behavior of such antibiotics. Further analysis reveals a strong relevance between the molecular polarity and the passage of antibiotics. This result indicates the non-negligible impact of Coulombic and dipole–surface attraction for the passage of polar zwitterionic fluoroquinolones and nonionized sulfonamides, respectively. In comparison, the dipole–surface interaction had a negligible impact on the rejection of low polar and charged PFASs compared to the dominant size exclusion and Coulombic interaction. Leveraging on these results, a mechanistic framework integrating with size exclusion, Coulombic interaction, and dipole–surface interaction toward efficient rejection of various contaminants were developed. Such improved fundamental understanding promotes the rational design of NF membranes for highly effective water decontamination.


  • Top Cited Papers

    Distinct Sorption and Rejection Behavior of Hydrophobic Endocrine-Disrupting Compounds by Chlorinated Polyamide Nanofiltration Membranes: Mechanisms and Implications

    by Wenhao Su, Yi Liu, Haowen Wu, Wenjinghao Yang, Dingyu Xing, Jianhua Qiu, Lin Lin, Zhenghua Zhang, Hao Guo

    Effective removal of hydrophobic endocrine-disrupting compounds (EDCs) using polyamide nanofiltration (NF) membranes remains a challenge in membrane-based water treatment. A common belief is that the sorption of hydrophobic EDCs is key to their rejection, while high sorption often leads to low rejection. However, this study reported distinct sorption–rejection behavior of EDCs by various chlorinated polyamide membranes. Specifically, the chlorinated NF90 membrane exhibited significantly reduced sorption and, thus, enhanced rejection for EDCs. This is primarily attributed to the enhanced hydrophilic carboxyl groups through chlorination-induced hydrolysis, which can suppress the hydrophobic interactions between the membrane and the EDCs. More interestingly, the chlorinated VNF1 membrane demonstrated higher sorption but also higher rejection of EDCs than that of the virgin membrane. The high sorption can be attributed to the strong hydrophobic interaction between EDCs and the hydrophobic chlorine attached to the membrane. Meanwhile, the large size of chlorine also strengthened membrane size exclusion, thereby enhancing its rejection of EDCs. Such enhanced size exclusion overperformed the impact of increased sorption, thus leading to enhanced rejection. These findings elaborate the existing membrane sorption–rejection framework and offer valuable insights for the rational design of advanced NF membranes aiming for the effective elimination of EDCs in water and wastewater treatment.


  • Enhanced removal of iodine ions using Zn-based metal-organic framework/polypyrrole adsorption membrane

    by Lingyun Xu, Shanshan Lu, Liping Jiang, Xiaohe Tian, Xijie Lin, Jianhua Qiu


  • Flexible Cyclotriphosphonitrile‐Based Covalent Organic Frameworks for the Capture of Iodine

    by Zhaoqi Zheng, Yan Hong, Peixu Zheng, Wei Luo, Jianhua Qiu, Liping Jiang

    The development of highly efficient materials for trapping radioactive iodine is essential for the safe use of nuclear energy. Herein, we present a strategy to synergistically enhance iodine capture by exploiting the flexible building blocks with the affinity properties of electrically rich heteroatoms by combining the cyclic triphosphonitrile derivative with amine linkers of different molecular lengths and constructing triangular pore‐structured flexible cyclotriphosphonitrile‐based covalent organic frameworks. A series of cyclotriphosphonitrile‐based COFs (CTP‐X‐COF, X = PDA, ODA, BPY, DPT) with triangular pore topology were synthesized using CTP‐6 as the node and connection point of p‐phenylenediamine (PDA), 4,4‐diaminodiphenyl ether (ODA), 5,5‐diamino2,2‐bipyridine (BPY), and 4,4‐diaminotribiphenyl (DPT) with different molecular lengths. It was found that the adsorption capacities of CTP‐PDA‐COF, CTP‐ODA‐COF, CTP‐BPY‐COF, and CTP‐DPT‐COF for iodine vapor were 4.65 g g −1 , 4.18 g g −1 , 2.38 g g −1 , and 3.57 g g −1 , respectively. The results showed that the adsorption capacities of CTP‐PDA‐COF, CTP‐ODA‐COF, CTP‐BPY‐COF, and CTP‐DPT‐COF for iodine in cyclohexane were 281.50 mg g −1 , 221.67 mg g −1 , 161.14 mg g −1 , and 222.67 mg g −1 , respectively. It was found that the four COFs adsorbed iodine in cyclohexane solution was a mixed adsorption process with chemical adsorption playing a predominant role and physical adsorption as an auxiliary mechanism.