Zhengbang Chen

Nitrogen injection technology has become an important production technology after water injection development in the karst fracture-vuggy reservoir in Tahe Oilfield. However, due to the influence of reservoir heterogeneity and the high mobility of gas fluid, nitrogen easily forms a dominant channel and gas channeling occurs, and the recovery effect time is short. Based on this, a visual surface karst model is designed and created to study nitrogen foam-assisted gas drive. The results show that after gas channeling occurs in the dominant channel of nitrogen flooding, foam injection-assisted gas flooding can improve oil recovery. In the longitudinal direction, foam-assisted gas drive mainly displaces the remaining oil because of gravity differentiation and the reduction of oil–water interfacial tension. In the horizontal direction, foam-assisted gas drive is mainly used to block the large pore cracks and dominant channels, promote the gas to turn into large tortuous and small cracks, and expand the swept efficiency of the gas. After forming the dominant channel, injecting 0.3 pv salt-sensitive foam with a gas–liquid ratio of 2:1 in the middle of the gas channel can improve the recovery rate of the model from 4% to about 25%, and the recovery rate can be increased by about 20%, which improves the effect of gas flushing and improves the development efficiency of the oil field at the same time.

Nitrogen injection technology has become an important production technology after water injection development in the karst fracture-vuggy reservoir in Tahe oilfield. However, due to the influence of reservoir heterogeneity and high mobility of gas fluid, nitrogen is easy to form a dominant channel and gas channelling occurs, and the recovery effect time is short. Based on this, a visual surface karst model is designed and made to study nitrogen foam assisted gas drive. The results show that after gas channeling occurs in the dominant channel of nitrogen flooding, foam injection assisted gas flooding can improve oil recovery. In the longitudinal direction, foam assisted gas drive mainly displaces the remaining oil because of gravity differentiation and the reduction of oil-water interfacial tension. In the horizontal direction, foam assisted gas drive is mainly used to block the large pore cracks and dominant channels, and promote the gas to turn into the large tortuous and small cracks, and expand the swept efficiency of the gas.After forming the dominant channel, injecting 0.3pv salt-sensitive foam with a gas-liquid ratio of 2:1 in the middle of the gas channel can improve the recovery rate of the model from 4% to about 25%, and the recovery rate can be increased by about 20%, which improves the effect of gas flushing and improves the development efficiency of the oil field at the same time.

To address the issue of ineffective injection resulting from the consistent channeling of injected water through highly permeable channels in ultra-deep, high-temperature, high-salinity, and strongly heterogeneous reservoirs during the production process, a gel particle profile control agent suitable for high-temperature and high-salinity conditions was chosen. With the help of the glass etching visual microscopic model and the heterogeneous long core model, the formation mechanism of a water flooding channeling path and the distribution law of the remaining oil were explored, the microscopic profile control mechanism of the different parameters was clarified, and the profile control effect of macroscopic core displacement was analyzed. The research shows that the formation mechanism of a water flooding channeling path is dominated by the distribution law of the permeability section and the connection mode between different penetration zones. The remaining oil types after water flooding are mainly contiguous block, parallel throats, and multi-branch clusters. The profile control effect of gel particles on reservoir vertical heterogeneity is better than that of reservoir lateral heterogeneity. It was found that 10 wt% submicron particles with a median diameter of 600 nm play a good role in profiling and plugging pores of 5–20 μm. In addition, 10 wt% micron-sized particles with a median diameter of 2.63 μm mainly play a strong plugging role in the pores of 20–30 μm, and 5 wt% micron-sized particles with a median diameter of 2.63 μm mainly form a weak plugging effect on the pores of 10–20 μm. The overall profile control effect of 10 wt% submicro particles is the best, and changes in concentration parameters have a more significant effect on the profile control effect. In the macroscopic core profile control, enhanced oil recovery (EOR) can reach 16%, and the gel particles show plugging, deformation migration, and re-plugging. The research results provide theoretical guidance for tapping the potential of the remaining oil in strong heterogeneous reservoirs. To date, the gel particles have been applied in the Tahe oilfield and have produced an obvious profile control effect; the oil production has risen to the highest value of 26.4 t/d, and the comprehensive water content has fallen to the lowest percentage of 32.1%.