Qiangqiang Xiao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Qiangqiang Xiao has a total of 44 co-authors. Here are the top co-authors by number of shared publications:
- Xudong Zu
School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210094, China
8 shared publications - Zhengxiang Huang
School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210094, China
7 shared publications - Xin Jia
Nanjing University of Science and Technology, China
4 shared publications Bin Ma
3 shared publicationsXin Jia
3 shared publications- Bin Ma
Nanjing University of Science and Technology, China
2 shared publications
Latest Publications
- Open Access
Unloading Acceleration Driven by Shock Pressure: A Theoretical Model for Jet Formation of High Entropy Alloys
Accurately predicting the terminal state of shaped charge jets (SCJs) is crucial for optimizing their penetration performance. The core challenge lies in a deep understanding of the complete physical chain from shock compression to unloading expansion. This paper presents a hybrid analytical–numerical model for SCJ formation that incorporates a shock-pressure-driven unloading term. Unlike classical PER theory, the proposed model explicitly introduces an unloading term and derives a quantitative expression for the momentum conversion factor to quantitatively characterize the momentum redistribution during collapse. Our analysis finds that exhibits a typical S-shaped evolution law as the dimensionless Mach number varies. This study uses a logistic function with two characteristic parameters, and , to accurately fit the data. The research results indicate that the model parameters have clear physical connotations: characterizes the critical condition for the material to transition from “strength-dominated” to “kinetic-energy-dominated” behavior, while k reflects the degree of abrupt transition. After calibrating the model parameters using high-fidelity numerical simulations, the jet morphology and velocity data obtained from X-ray flash photography experiments are compared and verified, confirming that the model can significantly improve the prediction accuracy. Especially for Ti55Al20V5Zr5Nb15 HEA, the prediction error in the jet velocity is less than 4%, and the theoretically predicted shock pressure is highly correlated with the numerical results . A further mechanistic analysis indicates that the proposed model successfully decodes the unique response of the HEA: its high dynamic strength results in a larger value, causing its momentum conversion efficiency to fall within a lower range under typical impact conditions. The theoretical framework constructed in this study provides a hybrid analytical–numerical and highly reliable theoretical tool for the accurate prediction of SCJs, as well as for the material selection and design of high-performance liners.Open AccessUnloading Acceleration Driven by Shock Pressure: A Theoretical Model for Jet Formation of High Entropy Alloys
Accurately predicting the terminal state of shaped charge jets (SCJs) is crucial for optimizing their penetration performance. The core challenge lies in a deep understanding of the complete physical chain from shock compression to unloading expansion. This paper presents a hybrid analytical–numerical model for SCJ formation that incorporates a shock-pressure-driven unloading term. Unlike classical PER theory, the proposed model explicitly introduces an unloading term and derives a quantitative expression for the momentum conversion factor to quantitatively characterize the momentum redistribution during collapse. Our analysis finds that exhibits a typical S-shaped evolution law as the dimensionless Mach number varies. This study uses a logistic function with two characteristic parameters, and , to accurately fit the data. The research results indicate that the model parameters have clear physical connotations: characterizes the critical condition for the material to transition from “strength-dominated” to “kinetic-energy-dominated” behavior, while k reflects the degree of abrupt transition. After calibrating the model parameters using high-fidelity numerical simulations, the jet morphology and velocity data obtained from X-ray flash photography experiments are compared and verified, confirming that the model can significantly improve the prediction accuracy. Especially for Ti55Al20V5Zr5Nb15 HEA, the prediction error in the jet velocity is less than 4%, and the theoretically predicted shock pressure is highly correlated with the numerical results . A further mechanistic analysis indicates that the proposed model successfully decodes the unique response of the HEA: its high dynamic strength results in a larger value, causing its momentum conversion efficiency to fall within a lower range under typical impact conditions. The theoretical framework constructed in this study provides a hybrid analytical–numerical and highly reliable theoretical tool for the accurate prediction of SCJs, as well as for the material selection and design of high-performance liners. - Open Access
- 1 February 2026
- Published by KEAI Publishing in Defence Technology
- Vol. 56, 244-253
The effects of compressibility and target strength on shaped charge jet penetration
- 1 February 2026
- Published by KEAI Publishing in Defence Technology
- Vol. 56, 244-253
Open AccessThe effects of compressibility and target strength on shaped charge jet penetration
- 21 October 2025
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 13 (43) , 18795-18809
Microwave-Absorbing CaO-CNT Catalyst for Enhanced Transesterification: Bridging Dielectric Loss to Energy-Efficient Fatty Acid Methyl Ester Production
- 21 October 2025
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 13 (43) , 18795-18809
Microwave-Absorbing CaO-CNT Catalyst for Enhanced Transesterification: Bridging Dielectric Loss to Energy-Efficient Fatty Acid Methyl Ester Production
- Open Access
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Latin American Journal of Solids and Structures
- Vol. 22 (7) , e8579
The application of refractory high entropy alloys in shaped charge
High entropy alloys (HEAs) have attracted widespread attention from researchers as emerging materials. Among them, refractory high entropy alloys (RHEAs) have shown potential for application in high-temperature environments due to their excellent high-temperature mechanical properties. This study mainly focuses on TiAlVZrNb RHEAs, conducting quasi-static and dynamic mechanical experiments, and fitting Johnson Cook constitutive equation parameters. In addition, the formation and aftereffect of the jets are studied through experiments. The temperature and yield strength distribution of the jets are studied through numerical simulation. The results indicate that under quasi-static loading, TiAlVZrNb RHEAs exhibit high yield strength and excellent ductility. The cohesiveness of the jet is discussed by combining the theoretical and mechanical properties. The burn marks on the quilt and oil tank behind the target also confirm the strong aftereffect of TiAlVZrNb RHEAs jet. This study can provide a reference for the application and design of RHEAs liner.
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Latin American Journal of Solids and Structures
- Vol. 22 (7) , e8579
Open AccessThe application of refractory high entropy alloys in shaped charge
High entropy alloys (HEAs) have attracted widespread attention from researchers as emerging materials. Among them, refractory high entropy alloys (RHEAs) have shown potential for application in high-temperature environments due to their excellent high-temperature mechanical properties. This study mainly focuses on TiAlVZrNb RHEAs, conducting quasi-static and dynamic mechanical experiments, and fitting Johnson Cook constitutive equation parameters. In addition, the formation and aftereffect of the jets are studied through experiments. The temperature and yield strength distribution of the jets are studied through numerical simulation. The results indicate that under quasi-static loading, TiAlVZrNb RHEAs exhibit high yield strength and excellent ductility. The cohesiveness of the jet is discussed by combining the theoretical and mechanical properties. The burn marks on the quilt and oil tank behind the target also confirm the strong aftereffect of TiAlVZrNb RHEAs jet. This study can provide a reference for the application and design of RHEAs liner.
- Open Access
Application of Lee–Tarver Model for Energetic Materials Safety Assessment Utilized in Aerospace Applications
Energetic materials, essential for rocket propulsion, play a crucial role in aerospace systems. These materials lack sufficient safety assessments and pose significant risks to life and infrastructure. The slow progress in this field is hindered by prohibitively high experimental costs and the inherently destructive nature of these experiments. This study aimed to evaluate modeling-based safety assessments, primarily utilizing the Lee–Tarver model. It specifically addressed the threat posed by shaped charges during transportation. Experimental analyses employed 50 mm JH-2 shaped charges, targeting RDX-based JH-2 formulation, since RDX is widely used in various rocket motor propellant formulations. TNT was also used to enhance the validation of the Lee–Tarver model findings. Various logistical configurations were explored, testing steel container walls ranging from 10 mm thickness to reinforced walls of 50 mm, 60 mm, and 65 mm steel. Comparative analysis with experiments reinforced the accuracy of the Lee–Tarver model’s numerical predictions. Both simulations and experiments affirmed that a 65 mm steel protection suffices for the safe transportation of RDX-based JH-2 formulations and TNT within a 10 mm storage box in logistical setups. Furthermore, this study emphasizes the Lee–Tarver model’s reliability for most energetic materials safety assessments, while acknowledging certain limitations.
Open AccessApplication of Lee–Tarver Model for Energetic Materials Safety Assessment Utilized in Aerospace Applications
Energetic materials, essential for rocket propulsion, play a crucial role in aerospace systems. These materials lack sufficient safety assessments and pose significant risks to life and infrastructure. The slow progress in this field is hindered by prohibitively high experimental costs and the inherently destructive nature of these experiments. This study aimed to evaluate modeling-based safety assessments, primarily utilizing the Lee–Tarver model. It specifically addressed the threat posed by shaped charges during transportation. Experimental analyses employed 50 mm JH-2 shaped charges, targeting RDX-based JH-2 formulation, since RDX is widely used in various rocket motor propellant formulations. TNT was also used to enhance the validation of the Lee–Tarver model findings. Various logistical configurations were explored, testing steel container walls ranging from 10 mm thickness to reinforced walls of 50 mm, 60 mm, and 65 mm steel. Comparative analysis with experiments reinforced the accuracy of the Lee–Tarver model’s numerical predictions. Both simulations and experiments affirmed that a 65 mm steel protection suffices for the safe transportation of RDX-based JH-2 formulations and TNT within a 10 mm storage box in logistical setups. Furthermore, this study emphasizes the Lee–Tarver model’s reliability for most energetic materials safety assessments, while acknowledging certain limitations.
- 9 February 2024
- Published by Elsevier in Composites Communications
- Vol. 46
Photo-reduced TiO2@WO3 electrospun nanofibers for efficient SERS and photoelectrochemical performances
- 9 February 2024
- Published by Elsevier in Composites Communications
- Vol. 46
Photo-reduced TiO2@WO3 electrospun nanofibers for efficient SERS and photoelectrochemical performances
- Open Access
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Latin American Journal of Solids and Structures
- Vol. 21 (3) , e540
Safety Assessment of Insensitive and Conventional Energetic Materials using 50mm Small Standard Shaped Charges: Numerical and Experimental Insights
The detonation of conventional munitions due to accidents or hostile actions causes urban destruction and loss of life, underscoring the need for improved safety measures. This study addresses the scarcity of research in munitions safety by investigating the threat of small and medium munitions. Experimental setups using 50mm shaped charges were developed and simulated with ANSYS AUTODYN, featuring JH-2 explosive and oxygen free high conductivity copper liner. Aluminum buffer plates were added to align jet energy levels with small and medium munitions' requirements. Safety assessments of JH-2 explosive against standard charges utilized φ45x40mm JH-2 targets covered with steel. Numerical simulations employed the Lee-Tarver ignition and growth model, comparing JH-2 explosive response with insensitive explosives like LX-17 and TATB. Results showed JH-2's failure in experimental tests, corroborated by simulations, while TATB and LX-17 remained stable. This study advocates for the adoption of cost-effective, insensitive explosives in next generation weaponry to mitigate unintentional detonations.
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Latin American Journal of Solids and Structures
- Vol. 21 (3) , e540
Open AccessSafety Assessment of Insensitive and Conventional Energetic Materials using 50mm Small Standard Shaped Charges: Numerical and Experimental Insights
The detonation of conventional munitions due to accidents or hostile actions causes urban destruction and loss of life, underscoring the need for improved safety measures. This study addresses the scarcity of research in munitions safety by investigating the threat of small and medium munitions. Experimental setups using 50mm shaped charges were developed and simulated with ANSYS AUTODYN, featuring JH-2 explosive and oxygen free high conductivity copper liner. Aluminum buffer plates were added to align jet energy levels with small and medium munitions' requirements. Safety assessments of JH-2 explosive against standard charges utilized φ45x40mm JH-2 targets covered with steel. Numerical simulations employed the Lee-Tarver ignition and growth model, comparing JH-2 explosive response with insensitive explosives like LX-17 and TATB. Results showed JH-2's failure in experimental tests, corroborated by simulations, while TATB and LX-17 remained stable. This study advocates for the adoption of cost-effective, insensitive explosives in next generation weaponry to mitigate unintentional detonations.
- Open Access
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Latin American Journal of Solids and Structures
- Vol. 21 (3) , e537
Study on cone angle of shockwave front in liquid composite protective structure
Liquid composite armor has demonstrated excellent performance in protecting against shaped charge jets. Currently, most existing theoretical calculation models for the velocity range of the disturbed jet approximate the cone angle of the shockwave front as the Mach angle. However, indiscriminately equating the cone angle of the shockwave front with the Mach angle can lead to significant errors in the calculated velocity range of the disturbed jet. To address this issue, this study focuses on investigating the variation of the cone angle of the shockwave front within the liquid composite protective structure. Firstly, a dimensional analysis was conducted to determine the functional relationship between the cone angle of the shockwave front and relevant parameters. Then, the process of jet penetrating liquid composite protective structure was simulated by Autodyn. The results demonstrated that the normalized cone angle solely depends on the normalized diameter within the critical angle. By fitting the simulation data, the formula for calculating the cone angle of the shockwave front was derived.
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Latin American Journal of Solids and Structures
- Vol. 21 (3) , e537
Open AccessStudy on cone angle of shockwave front in liquid composite protective structure
Liquid composite armor has demonstrated excellent performance in protecting against shaped charge jets. Currently, most existing theoretical calculation models for the velocity range of the disturbed jet approximate the cone angle of the shockwave front as the Mach angle. However, indiscriminately equating the cone angle of the shockwave front with the Mach angle can lead to significant errors in the calculated velocity range of the disturbed jet. To address this issue, this study focuses on investigating the variation of the cone angle of the shockwave front within the liquid composite protective structure. Firstly, a dimensional analysis was conducted to determine the functional relationship between the cone angle of the shockwave front and relevant parameters. Then, the process of jet penetrating liquid composite protective structure was simulated by Autodyn. The results demonstrated that the normalized cone angle solely depends on the normalized diameter within the critical angle. By fitting the simulation data, the formula for calculating the cone angle of the shockwave front was derived.
- Open Access
Blast Resistance of a Masonry Wall Coated with a Polyurea Elastomer
The coating of polyurea elastomers on walls is a hotspot in the protection field. This work combines a numerical simulation with experimental validation to examine the blast resistance after coating a polyurea elastomer on a 370 mm wall under a contact explosion. Firstly, the failure limit, failure mode, and failure mechanism of the 370 mm unreinforced wall under different strength loads are studied. In the case of the contact explosion, the increase in size of the 370 mm wall blasting pit gradually stops after the dose is increased to more than 1 kg. Thereafter, the energy of the explosive load wis released by splashing wall fragments as well as by the deflection and movement of the wall. Spraying double-sided polyurea reinforcement on the wall can effectively improve the resistance to damages caused by exposure to explosive loads and can inhibit the damage to the surrounding personnel and equipment caused by flying structural debris. When the polyurea thickness on the front surface is 6 mm, the optimal thickness of the back surface should be 2 mm.
Open AccessBlast Resistance of a Masonry Wall Coated with a Polyurea Elastomer
The coating of polyurea elastomers on walls is a hotspot in the protection field. This work combines a numerical simulation with experimental validation to examine the blast resistance after coating a polyurea elastomer on a 370 mm wall under a contact explosion. Firstly, the failure limit, failure mode, and failure mechanism of the 370 mm unreinforced wall under different strength loads are studied. In the case of the contact explosion, the increase in size of the 370 mm wall blasting pit gradually stops after the dose is increased to more than 1 kg. Thereafter, the energy of the explosive load wis released by splashing wall fragments as well as by the deflection and movement of the wall. Spraying double-sided polyurea reinforcement on the wall can effectively improve the resistance to damages caused by exposure to explosive loads and can inhibit the damage to the surrounding personnel and equipment caused by flying structural debris. When the polyurea thickness on the front surface is 6 mm, the optimal thickness of the back surface should be 2 mm.
- Open Access
Influence Mechanism of Foamed Concrete Coating Thickness on the Blast Resistance of RC Walls
How to effectively reduce the damage of frequent accidental explosions and explosion attacks to existing walls is an important concern of the blast resistance field. In the present study, the influence of the foamed concrete (density 820 kg/m3, water-cement ratio 0.4) coating thickness on the blast resistance of a 120 mm RC (reinforced concrete) wall was studied through blast experiments, numerical simulations, and shock wave theory. Results show that the influences of foamed concrete on the blast resistance of RC walls are jointly decided by the stress drop caused by impedance effect and exponential attenuation and the stress rise caused by high-speed impact compression. The coating thickness mainly affects the foam concrete’s fragmentation degree and stress attenuation. A lower critical coating thickness exists in foamed concrete-coated RC walls. The blast resistance of the RC wall will decrease when the coating thickness is less than that value. The lower critical coating thickness is related to the intensity of blast load and the energy absorption capacity of foamed concrete, and it can be predicted by monitoring the explosive stress and energy incident to the RC wall.
Open AccessInfluence Mechanism of Foamed Concrete Coating Thickness on the Blast Resistance of RC Walls
How to effectively reduce the damage of frequent accidental explosions and explosion attacks to existing walls is an important concern of the blast resistance field. In the present study, the influence of the foamed concrete (density 820 kg/m3, water-cement ratio 0.4) coating thickness on the blast resistance of a 120 mm RC (reinforced concrete) wall was studied through blast experiments, numerical simulations, and shock wave theory. Results show that the influences of foamed concrete on the blast resistance of RC walls are jointly decided by the stress drop caused by impedance effect and exponential attenuation and the stress rise caused by high-speed impact compression. The coating thickness mainly affects the foam concrete’s fragmentation degree and stress attenuation. A lower critical coating thickness exists in foamed concrete-coated RC walls. The blast resistance of the RC wall will decrease when the coating thickness is less than that value. The lower critical coating thickness is related to the intensity of blast load and the energy absorption capacity of foamed concrete, and it can be predicted by monitoring the explosive stress and energy incident to the RC wall.