Esmaeil Akbarinezhad
Research Subjects
Esmaeil Akbarinezhad has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
Naser Esmaeili
2 shared publicationsAhmad Zamani Gharaghooshi
Industrial Protection Division, Research Institute of Petroleum Industry (RIPI), P.O. Box 14665-137, Tehran, Iran
1 shared publicationAlireza Akbarinejad
1 shared publication- Danial Iravani
Chemical Engineering Department, Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad, Iran
1 shared publication F. Sharif
Polymer Engineering and Color Technology Department, Amirkabir University of Technology, Tehran, Iran
1 shared publicationH. R. Faridi
Department of Materials Engineering & Metallurgy, Hamedan University of Technology, Hamedan, Iran
1 shared publication
Latest Publications
- 15 January 2021
- Published by Pleiades Publishing Ltd in Protection of Metals and Physical Chemistry of Surfaces
- Vol. 57 (1) , 153-167
Study of Adsorption/Desorption Effect of 2-Mercaptobenzothiazole as Sweet Corrosion Inhibitor on API-5L X60 Steel
In this study, the inhibitive performance of 2-mercaptobenzothiazole (2MBT) and 2-aminobenzothiazole (2ABT) were investigated on API-5L X60 steel as corrosion inhibitor in NaCl 3.5 wt % solution saturated with CO2 at 25, 40 and 60°C. The 2ABT compound due to the formation of bicarbonate salt and carbamate does not have good performance as a corrosion inhibitor. Adsorption/desorption effect of 2-mercaptobenzothiazole was studied by electrochemical impedance spectroscopy (EIS) techniques. Adsorption effects of 2MBT on Volta potential of metal surface were studied by mapping via Scanning Kelvin Probe (SKP) method. Volta potential changes in the presence of inhibitor follow corrosion parameters fluctuations that were observed in the other test results with respect to bare metal. Results showed that the 2MBT had adsorption/desorption behavior on metal surface during immersion. Inhibitive properties of 2MBT was studied by weight loss, potentiodynamic polarization and EIS. 2-Mercaptobenzothiazole had effective inhibition performance with 97% efficiency at 300 ppm concentration and excellent adsorption during immersion in sweet corrosion media. Adsorption of 2MBT on the surface of API-5L X60 obeys the Langmuir isotherm model. The value of \({{\Delta }}G_{{{\text{ads}}}}^{^\circ }\) showed that 2MBT adsorbs on API-5L X60 surface via physical and chemical adsorption processes. 2-Mercaptobenzothiazole increases activation energy of metal dissolution in CO2 saturated solution. Slope change of anodic and cathodic branches in polarization plots revealed that this compound acts as a mixed type inhibitor. Increasing of test media temperature decreases inhibitive power of 2-mercaptobenzothiazole. Contact angle measurements revealed hydrophobic effect of 2-MBT absorption on to sample surface.- 15 January 2021
- Published by Pleiades Publishing Ltd in Protection of Metals and Physical Chemistry of Surfaces
- Vol. 57 (1) , 153-167
Study of Adsorption/Desorption Effect of 2-Mercaptobenzothiazole as Sweet Corrosion Inhibitor on API-5L X60 Steel
In this study, the inhibitive performance of 2-mercaptobenzothiazole (2MBT) and 2-aminobenzothiazole (2ABT) were investigated on API-5L X60 steel as corrosion inhibitor in NaCl 3.5 wt % solution saturated with CO2 at 25, 40 and 60°C. The 2ABT compound due to the formation of bicarbonate salt and carbamate does not have good performance as a corrosion inhibitor. Adsorption/desorption effect of 2-mercaptobenzothiazole was studied by electrochemical impedance spectroscopy (EIS) techniques. Adsorption effects of 2MBT on Volta potential of metal surface were studied by mapping via Scanning Kelvin Probe (SKP) method. Volta potential changes in the presence of inhibitor follow corrosion parameters fluctuations that were observed in the other test results with respect to bare metal. Results showed that the 2MBT had adsorption/desorption behavior on metal surface during immersion. Inhibitive properties of 2MBT was studied by weight loss, potentiodynamic polarization and EIS. 2-Mercaptobenzothiazole had effective inhibition performance with 97% efficiency at 300 ppm concentration and excellent adsorption during immersion in sweet corrosion media. Adsorption of 2MBT on the surface of API-5L X60 obeys the Langmuir isotherm model. The value of \({{\Delta }}G_{{{\text{ads}}}}^{^\circ }\) showed that 2MBT adsorbs on API-5L X60 surface via physical and chemical adsorption processes. 2-Mercaptobenzothiazole increases activation energy of metal dissolution in CO2 saturated solution. Slope change of anodic and cathodic branches in polarization plots revealed that this compound acts as a mixed type inhibitor. Increasing of test media temperature decreases inhibitive power of 2-mercaptobenzothiazole. Contact angle measurements revealed hydrophobic effect of 2-MBT absorption on to sample surface.- 19 March 2019
- Published by SAGE Publications in Corrosion Engineering, Science and Technology: The International Journal of Corrosion Processes and Corrosion Control
- Vol. 54 (5) , 389-401
Electrochemical evaluations of zinc-rich epoxy primers modified with polyaniline and exfoliated polyaniline graphite nanocomposite
Polyaniline (Pani) and exfoliated polyaniline graphite (EPaniG) nanocomposites were used to modify the protective properties of an epoxy zinc-rich primer (ZRP). The corrosion resistance properties of primers were evaluated in 3.5% sodium chloride solution for a period of 120 days via electrochemical noise (EN) and electrochemical impedance spectroscopy (EIS). EN data were analysed via Wavelet and Hilbert spectra analysis to evaluate the protection mechanism of different ZRP coatings during immersion. Coating resistance and charge transfer resistance of the primers were evaluated by EIS measurements. Results showed good compatibility between |Z|0.01Hz from EIS measurements and mean noise resistance which results from EN data and these evaluations allowed the examination of coating performances during immersion. Free corrosion potential (Ecorr) measurements and salt spray test revealed that both the cathodic protection and barrier properties of the ZRP primer were improved after addition of EPaniG nanocomposite to the ZRP sample.
- 19 March 2019
- Published by SAGE Publications in Corrosion Engineering, Science and Technology: The International Journal of Corrosion Processes and Corrosion Control
- Vol. 54 (5) , 389-401
Electrochemical evaluations of zinc-rich epoxy primers modified with polyaniline and exfoliated polyaniline graphite nanocomposite
Polyaniline (Pani) and exfoliated polyaniline graphite (EPaniG) nanocomposites were used to modify the protective properties of an epoxy zinc-rich primer (ZRP). The corrosion resistance properties of primers were evaluated in 3.5% sodium chloride solution for a period of 120 days via electrochemical noise (EN) and electrochemical impedance spectroscopy (EIS). EN data were analysed via Wavelet and Hilbert spectra analysis to evaluate the protection mechanism of different ZRP coatings during immersion. Coating resistance and charge transfer resistance of the primers were evaluated by EIS measurements. Results showed good compatibility between |Z|0.01Hz from EIS measurements and mean noise resistance which results from EN data and these evaluations allowed the examination of coating performances during immersion. Free corrosion potential (Ecorr) measurements and salt spray test revealed that both the cathodic protection and barrier properties of the ZRP primer were improved after addition of EPaniG nanocomposite to the ZRP sample.
- 9 December 2012
- Published by Springer Nature in Research on Chemical Intermediates
- Vol. 39 (9) , 4137-4144
Facile synthesis of polyaniline nanofibers in supercritical CO2 with high yield
- 9 December 2012
- Published by Springer Nature in Research on Chemical Intermediates
- Vol. 39 (9) , 4137-4144
Facile synthesis of polyaniline nanofibers in supercritical CO2 with high yield