Kenzhebek Myrzabekov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Kenzhebek Myrzabekov has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Kuanysh Alipbayev
Department of Aerospace and Electronic Engineering, Almaty University of Power Engineering and Telecommunications Named After Gumarbek Daukeyev, Almaty 050013, Kazakhstan
10 shared publications - Alina Fazylova
Department of Aerospace and Electronic Engineering, Almaty University of Power Engineering and Telecommunications Named After Gumarbek Daukeyev, Almaty 050013, Kazakhstan
6 shared publications - Teodor Iliev
Department of Telecommunication, University of Ruse, 7004 Ruse, Bulgaria
5 shared publications - Akylbek Bapyshev
Department of Electronics, Telecommunications and Space Technology, Satbayev University, Almaty 050013, Kazakhstan
4 shared publications - Fariza Oraz
Almaty University of Power Engineering and Telecommunications named after Gumarbek Daukeyev, Almaty, Kazakhstan
3 shared publications - Akylbek Bapyshev
Department of Science and Innovation, ALT University, Almaty 050012, Kazakhstan
1 shared publication
Latest Publications
- Open Access
Constraint-Aware Multi-Parametric Mass Optimization and Volume Assessment of an Electric-Pump Feed System for Liquid Rocket Engines
This article presents a constraint-aware multiparameter methodology for mass optimization and volume assessment of an electric-pump feed system (EPFS) for a liquid-propellant rocket engine. Preliminary EPFS sizing must account for coupled battery energy and peak-power limits, electrical-distribution mass, and thermal feasibility across operating conditions. The proposed framework combines component-based mass estimation with DC-bus-dependent distribution sizing, motor–inverter thermal screening, and preliminary core hardware-envelope volume assessment across prescribed thrust and burn-duration scenarios. Particular attention is paid to the combined consideration of the energy and power limitations of the battery pack, which allows for determining the transition between power-limited and energy-limited modes. Additionally, the model treats battery peak-power capability and motor–inverter thermal admissibility as feasibility constraints, while the total EPFS mass is used as the primary launch-oriented objective. The results demonstrate that the governing EPFS limitation changes with operating duration, transitioning from peak-power-controlled battery sizing to energy-controlled sizing and ultimately to the subsystem mass constraint. For a 25 kN, 120 s scenario, the minimum-mass configuration identified within the evaluated design set yielded model-predicted reductions of 47.4% in EPFS mass and 47.1% in estimated core hardware-envelope volume relative to the adopted baseline. The methodology provides a quantitative basis for preliminary EPFS configuration screening, mass minimization, and core-hardware packaging assessment, subject to design-point efficiency assumptions and simplified thermal and volumetric models.
Open AccessConstraint-Aware Multi-Parametric Mass Optimization and Volume Assessment of an Electric-Pump Feed System for Liquid Rocket Engines
This article presents a constraint-aware multiparameter methodology for mass optimization and volume assessment of an electric-pump feed system (EPFS) for a liquid-propellant rocket engine. Preliminary EPFS sizing must account for coupled battery energy and peak-power limits, electrical-distribution mass, and thermal feasibility across operating conditions. The proposed framework combines component-based mass estimation with DC-bus-dependent distribution sizing, motor–inverter thermal screening, and preliminary core hardware-envelope volume assessment across prescribed thrust and burn-duration scenarios. Particular attention is paid to the combined consideration of the energy and power limitations of the battery pack, which allows for determining the transition between power-limited and energy-limited modes. Additionally, the model treats battery peak-power capability and motor–inverter thermal admissibility as feasibility constraints, while the total EPFS mass is used as the primary launch-oriented objective. The results demonstrate that the governing EPFS limitation changes with operating duration, transitioning from peak-power-controlled battery sizing to energy-controlled sizing and ultimately to the subsystem mass constraint. For a 25 kN, 120 s scenario, the minimum-mass configuration identified within the evaluated design set yielded model-predicted reductions of 47.4% in EPFS mass and 47.1% in estimated core hardware-envelope volume relative to the adopted baseline. The methodology provides a quantitative basis for preliminary EPFS configuration screening, mass minimization, and core-hardware packaging assessment, subject to design-point efficiency assumptions and simplified thermal and volumetric models.
- Open Access
Integrated Multi-Criteria Control of a Dual-Channel Electric Pump-Fed Propellant Feed System for a Small Liquid Rocket Engine Under Energy and Thermal Constraints
Electric pump-fed liquid rocket engines require coordinated propellant delivery under coupled hydraulic, electrical, actuator, and thermal constraints. This study develops an integrated reduced-order model of a dual-channel electric pump-fed propellant system, including the battery and DC bus, power converters, two independently driven motor–pump units, hydraulic feed lines, control valves, combustion chamber, and thermal states. A hierarchical constrained multi-criteria supervisory controller is formulated to regulate chamber pressure, oxidizer-to-fuel mixture ratio, feed-channel coordination, electrical loading, and thermal response. Performance is compared with a conventional PI controller and an enhanced PI configuration incorporating feedforward and disturbance compensation under nominal, degraded, long-duration, and constraint-active scenarios. Relative to the baseline PI controller, the proposed controller reduced the startup pressure peak from 2.64 to 2.32 MPa, pressure RMSE from 0.016 to 0.006 MPa, and mean branch synchronization error from 0.112 to 0.028 MPa. The minimum battery voltage increased from 87.0 to 90.4 V, while the peak motor current decreased from approximately 88 to 65 A. In the 1800 s thermal case, the maximum fuel-drive temperature decreased from approximately 104 to 74 °C. Numerical verification and comparison with published experimental benchmarks supported the physical plausibility and equilibrium-scale behavior of the reduced-order model, while differences in absolute transient time scales limit its use for quantitative prediction of hardware transient dynamics. The results indicate improved coordinated control within the investigated operating envelope and support the use of the framework for comparative system-level assessment and preliminary design of small-class electric-pump propulsion systems.
Open AccessIntegrated Multi-Criteria Control of a Dual-Channel Electric Pump-Fed Propellant Feed System for a Small Liquid Rocket Engine Under Energy and Thermal Constraints
Electric pump-fed liquid rocket engines require coordinated propellant delivery under coupled hydraulic, electrical, actuator, and thermal constraints. This study develops an integrated reduced-order model of a dual-channel electric pump-fed propellant system, including the battery and DC bus, power converters, two independently driven motor–pump units, hydraulic feed lines, control valves, combustion chamber, and thermal states. A hierarchical constrained multi-criteria supervisory controller is formulated to regulate chamber pressure, oxidizer-to-fuel mixture ratio, feed-channel coordination, electrical loading, and thermal response. Performance is compared with a conventional PI controller and an enhanced PI configuration incorporating feedforward and disturbance compensation under nominal, degraded, long-duration, and constraint-active scenarios. Relative to the baseline PI controller, the proposed controller reduced the startup pressure peak from 2.64 to 2.32 MPa, pressure RMSE from 0.016 to 0.006 MPa, and mean branch synchronization error from 0.112 to 0.028 MPa. The minimum battery voltage increased from 87.0 to 90.4 V, while the peak motor current decreased from approximately 88 to 65 A. In the 1800 s thermal case, the maximum fuel-drive temperature decreased from approximately 104 to 74 °C. Numerical verification and comparison with published experimental benchmarks supported the physical plausibility and equilibrium-scale behavior of the reduced-order model, while differences in absolute transient time scales limit its use for quantitative prediction of hardware transient dynamics. The results indicate improved coordinated control within the investigated operating envelope and support the use of the framework for comparative system-level assessment and preliminary design of small-class electric-pump propulsion systems.
- Open Access
- 3 September 2026
- Published by MDPI AG in Engineering Proceedings
- Vol. 154 (1) , 48
Development of a Control System for an Electric Fuel Pump for an Ultra-Light Launch Vehicle
This article discusses the development of a control system for an electric propellant pump for a light-lift launch vehicle. The relevance of this work stems from the need to create compact and energy-efficient propellant supply systems capable of ensuring stable operation within the weight, size, and energy resource constraints of onboard equipment. The research object is presented as a single electromechanical-hydraulic system comprising an electric drive, a pump unit, a hydraulic circuit, and a digital control system. A mathematical model of the electric pump unit is developed, its numerical parameterization is performed, and a cascade control structure with a feedforward channel is proposed. A series of computational experiments are conducted, including an analysis of transient processes during pressure target changes, a study of the system’s response to hydraulic disturbances, and a robustness assessment under parameter uncertainty. It is established that the proposed control system provides higher response speed, a smaller integral control error, and better resistance to external disturbances compared to a classical cascade PI structure. The obtained results confirm the potential of the proposed approach for electric pump units for fuel supply of ultra-light launch vehicles.
- 3 September 2026
- Published by MDPI AG in Engineering Proceedings
- Vol. 154 (1) , 48
Open AccessDevelopment of a Control System for an Electric Fuel Pump for an Ultra-Light Launch Vehicle
This article discusses the development of a control system for an electric propellant pump for a light-lift launch vehicle. The relevance of this work stems from the need to create compact and energy-efficient propellant supply systems capable of ensuring stable operation within the weight, size, and energy resource constraints of onboard equipment. The research object is presented as a single electromechanical-hydraulic system comprising an electric drive, a pump unit, a hydraulic circuit, and a digital control system. A mathematical model of the electric pump unit is developed, its numerical parameterization is performed, and a cascade control structure with a feedforward channel is proposed. A series of computational experiments are conducted, including an analysis of transient processes during pressure target changes, a study of the system’s response to hydraulic disturbances, and a robustness assessment under parameter uncertainty. It is established that the proposed control system provides higher response speed, a smaller integral control error, and better resistance to external disturbances compared to a classical cascade PI structure. The obtained results confirm the potential of the proposed approach for electric pump units for fuel supply of ultra-light launch vehicles.
- Open Access
- 3 September 2026
- Published by MDPI AG in Engineering Proceedings
- Vol. 154 (1) , 38
Coordinated Control of a Dual-Motor Mobile Robot for Stable Motion on Uneven Surfaces
Stable motion of differential-drive mobile robots on uneven surfaces remains a challenging control problem because local variations in rolling resistance and wheel–terrain interaction generate asymmetric traction forces, trajectory deviation, and heading instability. This study investigates a dual-motor mobile robot in which the left and right driving wheels are actuated independently and coordinated through a coupled control structure that simultaneously regulates linear speed and suppresses yaw motion. A control-oriented nonlinear dynamic model is developed by combining the longitudinal and yaw dynamics of the platform with first-order actuator models and resistance terms that represent uneven-terrain effects through side-dependent rolling losses. Based on this model, a coordinated control law is formulated to redistribute the control effort between the two drives in response to both speed and angular-velocity errors. Numerical experiments are carried out for nominal motion, localized asymmetric resistance, prolonged uneven-surface excitation, robustness-boundary analysis, and actuator-dynamics sensitivity. The results show that the proposed strategy improves directional stability under uneven-surface disturbances, limits the degradation of forward motion, and enlarges the admissible operating region compared with decoupled drive action. The study demonstrates that coordinated inter-wheel control provides a physically interpretable and computationally efficient solution for enhancing the stability of wheeled mobile robots operating on irregular terrain.
- 3 September 2026
- Published by MDPI AG in Engineering Proceedings
- Vol. 154 (1) , 38
Open AccessCoordinated Control of a Dual-Motor Mobile Robot for Stable Motion on Uneven Surfaces
Stable motion of differential-drive mobile robots on uneven surfaces remains a challenging control problem because local variations in rolling resistance and wheel–terrain interaction generate asymmetric traction forces, trajectory deviation, and heading instability. This study investigates a dual-motor mobile robot in which the left and right driving wheels are actuated independently and coordinated through a coupled control structure that simultaneously regulates linear speed and suppresses yaw motion. A control-oriented nonlinear dynamic model is developed by combining the longitudinal and yaw dynamics of the platform with first-order actuator models and resistance terms that represent uneven-terrain effects through side-dependent rolling losses. Based on this model, a coordinated control law is formulated to redistribute the control effort between the two drives in response to both speed and angular-velocity errors. Numerical experiments are carried out for nominal motion, localized asymmetric resistance, prolonged uneven-surface excitation, robustness-boundary analysis, and actuator-dynamics sensitivity. The results show that the proposed strategy improves directional stability under uneven-surface disturbances, limits the degradation of forward motion, and enlarges the admissible operating region compared with decoupled drive action. The study demonstrates that coordinated inter-wheel control provides a physically interpretable and computationally efficient solution for enhancing the stability of wheeled mobile robots operating on irregular terrain.
- Open Access
Physics-Based Hybrid Control of Mobile Robot Drives with Adaptive Neural Network Compensation
This paper proposes a physically based hybrid architecture for controlling mobile robot drives. It combines a model-based controller, an adaptive neural network compensator for residual dynamics, and a Lyapunov-based stability supervision mechanism. Unlike existing hybrid control approaches, the proposed architecture implements a structured injection of neural network correction directly into the physical drive model with a controlled Lyapunov-based adaptation constraint. A mathematical model of the electromechanical drive of a differential mobile platform is developed, taking into account electrical and mechanical dynamics, wheel-to-surface contact interaction, and the system’s energy characteristics. Numerical simulation results demonstrate that the hybrid approach improves tracking accuracy, improves transient response, and ensures stable operation of the control system under parametric uncertainty, adhesion changes, and external disturbances. The proposed architecture maintains the physical interpretability of the model while simultaneously enhancing the system’s adaptability. The obtained results confirm the effectiveness of the developed method and its potential for application in control systems for mobile robotic platforms.
Open AccessPhysics-Based Hybrid Control of Mobile Robot Drives with Adaptive Neural Network Compensation
This paper proposes a physically based hybrid architecture for controlling mobile robot drives. It combines a model-based controller, an adaptive neural network compensator for residual dynamics, and a Lyapunov-based stability supervision mechanism. Unlike existing hybrid control approaches, the proposed architecture implements a structured injection of neural network correction directly into the physical drive model with a controlled Lyapunov-based adaptation constraint. A mathematical model of the electromechanical drive of a differential mobile platform is developed, taking into account electrical and mechanical dynamics, wheel-to-surface contact interaction, and the system’s energy characteristics. Numerical simulation results demonstrate that the hybrid approach improves tracking accuracy, improves transient response, and ensures stable operation of the control system under parametric uncertainty, adhesion changes, and external disturbances. The proposed architecture maintains the physical interpretability of the model while simultaneously enhancing the system’s adaptability. The obtained results confirm the effectiveness of the developed method and its potential for application in control systems for mobile robotic platforms.
- Open Access
- 14 January 2026
- Published by MDPI AG in Engineering Proceedings
- Vol. 122 (1) , 6
Methodology for Selecting an Electric Pump and Battery Pack for a Low-Thrust LRE: Computational Simulation Study
The paper offers a practical method for selecting an electric pump and battery pack for low-thrust liquid rocket engines. The approach combines 0D/1D modeling of hydraulic, electromechanical, and thermal subsystems in a single environment and is supplemented by sensitivity analysis, correlation analysis, and Monte Carlo simulation with N = 3000 iterations to verify the stability of the estimates. The methodology has been tested on mission profiles in the 5–50 kN thrust range and shows that the electric pump scheme is most effective at low thrusts, while an increase in thrust leads to a disproportionate increase in energy and thermal loads and narrows the scope of applicability. The determining factors remain the hydraulic efficiency of the pump η_pump and the oxidizer pressure; electrical parameters such as bus voltage and internal battery resistance have less influence and become noticeable at high power levels. Modeling confirms the stability of the obtained estimates; at a thrust of 20 kN, the spread of the battery block mass is close to ±10%. The proposed methodology provides quantitative guidelines in the early stages of design and helps to justify the scope of application of electric pump liquid rocket engines; expansion beyond low thrust requires progress in battery technologies.
- 14 January 2026
- Published by MDPI AG in Engineering Proceedings
- Vol. 122 (1) , 6
Open AccessMethodology for Selecting an Electric Pump and Battery Pack for a Low-Thrust LRE: Computational Simulation Study
The paper offers a practical method for selecting an electric pump and battery pack for low-thrust liquid rocket engines. The approach combines 0D/1D modeling of hydraulic, electromechanical, and thermal subsystems in a single environment and is supplemented by sensitivity analysis, correlation analysis, and Monte Carlo simulation with N = 3000 iterations to verify the stability of the estimates. The methodology has been tested on mission profiles in the 5–50 kN thrust range and shows that the electric pump scheme is most effective at low thrusts, while an increase in thrust leads to a disproportionate increase in energy and thermal loads and narrows the scope of applicability. The determining factors remain the hydraulic efficiency of the pump η_pump and the oxidizer pressure; electrical parameters such as bus voltage and internal battery resistance have less influence and become noticeable at high power levels. Modeling confirms the stability of the obtained estimates; at a thrust of 20 kN, the spread of the battery block mass is close to ±10%. The proposed methodology provides quantitative guidelines in the early stages of design and helps to justify the scope of application of electric pump liquid rocket engines; expansion beyond low thrust requires progress in battery technologies.
- Open Access
- 1 January 2026
- Published by Wiley in International Journal of Aerospace Engineering
- Vol. 2026 (1)
Applicability Boundaries of Electric Pump‐Fed Liquid Rocket Engines: A Systematic Review Using Normalized Metrics
Electric pump systems are increasingly being considered as an alternative to turbopumps in liquid rocket engines. Interest is driven by the potential for reduced dry mass and increased system efficiency. This systematic review analyzes 89 peer‐reviewed publications from 2008 to 2025. The applicability limits of EPS architecture are defined based on normalized metrics that ensure comparability of results. Sources were selected through a systematic search of leading scientific databases in accordance with the PRISMA procedure. The “battery‐to‐thrust ratio” indicator was introduced for interarticle comparison. A reduction in the “dry” weight of the engine by 0.23–0.46 kg/kN in the thrust range of 10–100 kN is shown, mainly due to the elimination of the hot turbomachine and a reduction in the number of high‐temperature and mechanically loaded components. The current level of EPS already meets the requirements of light and medium launch vehicles. Further development is linked to an increase in the specific energy of batteries to 600 W·h/kg, the improvement of cryogenic heat dissipation solutions, the qualification of large‐sized products manufactured using additive manufacturing techniques, and the bench validation of multiphysical digital twins. The implementation of these areas will accelerate the transition to serial EPS engines and expand the possibilities for creating reusable and more environmentally friendly rocket systems.
- 1 January 2026
- Published by Wiley in International Journal of Aerospace Engineering
- Vol. 2026 (1)
Open AccessApplicability Boundaries of Electric Pump‐Fed Liquid Rocket Engines: A Systematic Review Using Normalized Metrics
Electric pump systems are increasingly being considered as an alternative to turbopumps in liquid rocket engines. Interest is driven by the potential for reduced dry mass and increased system efficiency. This systematic review analyzes 89 peer‐reviewed publications from 2008 to 2025. The applicability limits of EPS architecture are defined based on normalized metrics that ensure comparability of results. Sources were selected through a systematic search of leading scientific databases in accordance with the PRISMA procedure. The “battery‐to‐thrust ratio” indicator was introduced for interarticle comparison. A reduction in the “dry” weight of the engine by 0.23–0.46 kg/kN in the thrust range of 10–100 kN is shown, mainly due to the elimination of the hot turbomachine and a reduction in the number of high‐temperature and mechanically loaded components. The current level of EPS already meets the requirements of light and medium launch vehicles. Further development is linked to an increase in the specific energy of batteries to 600 W·h/kg, the improvement of cryogenic heat dissipation solutions, the qualification of large‐sized products manufactured using additive manufacturing techniques, and the bench validation of multiphysical digital twins. The implementation of these areas will accelerate the transition to serial EPS engines and expand the possibilities for creating reusable and more environmentally friendly rocket systems.
- Open Access
- 14 September 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (18) , 10040
Dynamic Analysis and Force Adaptation in Elastic-Link Mechanical Systems with Two Degrees of Freedom
This study presents a comprehensive dynamic analysis of mechanical systems incorporating elastic joints and introduces an adaptive vibration actuator with an integrated transmission variator. The system’s behavior is modeled through kinematic and dynamic formulations, utilizing both analytical and numerical methods. The analysis reveals that the inclusion of elastic elements enables a force adaptation effect, allowing the output element to adjust dynamically to variations in external loading. Under conditions of constant input power, the output speed varies inversely with the load, ensuring reliable adaptive performance. Furthermore, the elastic joints facilitate internal force redistribution, enhancing energy efficiency and reducing mechanical losses. These findings hold relevance for applications in industrial automation and robotics, where consistent functionality under variable load conditions is essential.
- 14 September 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (18) , 10040
Open AccessDynamic Analysis and Force Adaptation in Elastic-Link Mechanical Systems with Two Degrees of Freedom
This study presents a comprehensive dynamic analysis of mechanical systems incorporating elastic joints and introduces an adaptive vibration actuator with an integrated transmission variator. The system’s behavior is modeled through kinematic and dynamic formulations, utilizing both analytical and numerical methods. The analysis reveals that the inclusion of elastic elements enables a force adaptation effect, allowing the output element to adjust dynamically to variations in external loading. Under conditions of constant input power, the output speed varies inversely with the load, ensuring reliable adaptive performance. Furthermore, the elastic joints facilitate internal force redistribution, enhancing energy efficiency and reducing mechanical losses. These findings hold relevance for applications in industrial automation and robotics, where consistent functionality under variable load conditions is essential.
- Open Access
The Aerodynamically Driven Orientation Control of a Solar Panel on an Aircraft with Numerical Simulation
For unmanned aerial vehicles with long-duration autonomous missions, efficient energy management is critically important. One of the most promising solutions is solar power, the implementation of which requires the continuous orientation tracking of the Sun’s position. This study presents a three-axis active solar tracking system based on a gimbal mount, providing full kinematic control of the panel in space. A mathematical model of orientation is developed using the Earth-Centered Inertial, local geographic frame, and unmanned aerial vehicle body coordinate systems. An aerodynamic analysis is conducted, including a quantitative assessment of drag, lift, and torque on the panel. Based on the obtained characteristics, limiting conditions for the safe operation of the tracker are formulated. An adaptive control algorithm is introduced, minimizing a generalized objective function that accounts for angular deviation, aerodynamic loads, and current energy balance. Numerical simulations are described, demonstrating system stability under various scenarios: turbulence, maneuvers, power limitations, and sensor errors. The results confirm the effectiveness of the proposed approach under real-world operating conditions.
Open AccessThe Aerodynamically Driven Orientation Control of a Solar Panel on an Aircraft with Numerical Simulation
For unmanned aerial vehicles with long-duration autonomous missions, efficient energy management is critically important. One of the most promising solutions is solar power, the implementation of which requires the continuous orientation tracking of the Sun’s position. This study presents a three-axis active solar tracking system based on a gimbal mount, providing full kinematic control of the panel in space. A mathematical model of orientation is developed using the Earth-Centered Inertial, local geographic frame, and unmanned aerial vehicle body coordinate systems. An aerodynamic analysis is conducted, including a quantitative assessment of drag, lift, and torque on the panel. Based on the obtained characteristics, limiting conditions for the safe operation of the tracker are formulated. An adaptive control algorithm is introduced, minimizing a generalized objective function that accounts for angular deviation, aerodynamic loads, and current energy balance. Numerical simulations are described, demonstrating system stability under various scenarios: turbulence, maneuvers, power limitations, and sensor errors. The results confirm the effectiveness of the proposed approach under real-world operating conditions.
- Open Access
- 13 February 2025
- Published by JSC Academy of Logistics and Transport in Вестник КазАТК
- Vol. 138 (3) , 529-538
АНАЛИТИЧЕСКИЙ ОБЗОР ОПТИМИЗАЦИИ МАССО-ГАБАРИТНЫХ ХАРАКТЕРИСТИК ЖИДКОСТНОГО РАКЕТНОГО ДВИГАТЕЛЯ С ПРИМЕНЕНИЕМ ЭЛЕКТРОНАСОСА
В статье представлен аналитический обзор современных теоретических и экспериментальных подходов к оптимизации массо-габаритных характеристик жидкостных ракетных двигателей (ЖРД) с использованием электронасосных систем. Рассматриваются экспериментальные исследования, направленные на повышение производительности и удельного импульса двигателей, а также использование алгоритмов управления насосами для точной регулировки подачи топлива. Также проведен анализ современных достижений в области управления ЖРД и экспериментальных исследований, направленных на улучшение удельного импульса и надежности двигателей. Применение электронасосов показало значительное сокращение массы двигательной установки и увеличение общей производительности, что открывает новые возможности для разработки легких и эффективных ракетных систем.
- 13 February 2025
- Published by JSC Academy of Logistics and Transport in Вестник КазАТК
- Vol. 138 (3) , 529-538
Open AccessАНАЛИТИЧЕСКИЙ ОБЗОР ОПТИМИЗАЦИИ МАССО-ГАБАРИТНЫХ ХАРАКТЕРИСТИК ЖИДКОСТНОГО РАКЕТНОГО ДВИГАТЕЛЯ С ПРИМЕНЕНИЕМ ЭЛЕКТРОНАСОСА
В статье представлен аналитический обзор современных теоретических и экспериментальных подходов к оптимизации массо-габаритных характеристик жидкостных ракетных двигателей (ЖРД) с использованием электронасосных систем. Рассматриваются экспериментальные исследования, направленные на повышение производительности и удельного импульса двигателей, а также использование алгоритмов управления насосами для точной регулировки подачи топлива. Также проведен анализ современных достижений в области управления ЖРД и экспериментальных исследований, направленных на улучшение удельного импульса и надежности двигателей. Применение электронасосов показало значительное сокращение массы двигательной установки и увеличение общей производительности, что открывает новые возможности для разработки легких и эффективных ракетных систем.