RZRuiqi Zhang

Ruiqi Zhang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ruiqi Zhang has a total of 75 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Mixed-Ligand-Driven Phase-Pure 2D Perovskite for Interfacial Passivation of Perovskite Photovoltaics

    by Meng-Chen Shih, Shaun Tan, Yongli Lu, Tim Kodalle, Tanguy Terlier, Matthias J. Grotevent, Faiz Mandani, Ruiqi Zhang, Do-Kyoung Lee, Yu-Kuan Lin, et al.

    Effective interfacial passivation is essential for achieving high-performance perovskite photovoltaics. 2D/3D heterostructures are a widely adopted strategy for defect passivation and band alignment regulation. Despite recent progress, achieving favorable interfacial energetics and comprehensively suppressing nonradiative recombination at both surfaces and grain boundaries continues to be an active area of investigation. We introduce a coassembled 2D architecture in which long-chain ligands are complemented by a minority component of short-chain ligands to form a mixed-ligand passivation layer. Such a coassembled structure promotes preferentially phase-pure, n = 2, 2D layer formation, resulting in an energetically favorable band alignment that enhances charge extraction. In addition, this coassembly facilitates effective passivation of interfacial defects at both surfaces and grain boundaries, leading to suppressed nonradiative recombination. As a consequence, these interfacial improvements increase carrier lifetimes and enhance the fill factor and open-circuit voltage of the device, yielding a higher power-conversion efficiency.

  • Open Access

    Morphological and chemical changes in Cd-free colloidal QD-LEDs during operation

    by Ruiqi Zhang, Jamie Geng, Shaun Tan, Mike Dillender, Shreyas Srinivasan, Taehyung Kim, Mayuran Saravanapavanantham, Kwang-Hee Kim, Heejae Chung, Sujin Park, et al.

    Heavy-metal-free quantum-dot light-emitting devices (QD-LEDs) demonstrate high brightness, saturated color, and high efficiency, yet their operational lifetimes remain limited, with the underlying degradation mechanisms not fully understood. Here, we show that InP/ZnSe/ZnS (red-emitting) and ZnTeSe/ZnSe/ZnS (blue-emitting) colloidal QD-LEDs undergo nanoscale morphological changes during operation. Interparticle coarsening and layer thinning are observed in the core functional layers, accompanied by the generation and diffusion of compositional-oxygen and hydrogen across the device, with oxygen accumulating at the Al electrode/ZnMgO electron-transport layer (ETL) interface. In situ transmission electron microscopy reveals that electron beam exposure, in presence of atomic hydrogen species, accelerates ZnMgO nanoparticles coarsening. To mitigate these degradation pathways, we show that acrylate-based resin encapsulation can stabilize the ETL, HTL, and QD layers by suppressing atomic species formation and halting morphology changes. This approach achieves over 50-fold and 5000-fold lifetime improvement in InP/ZnSe/ZnS and ZnTeSe/ZnSe/ZnS QD-LEDs, respectively. Our findings establish the causal relationships between morphological degradation, interlayer dynamics, and QD-LED instability, providing insight into the acrylate encapsulation treatment that enables efficient and long-lived QD-LEDs.

  • Open Access

    Decoding Nacre: Uncovering Unique Identifiers of Pearl Provenance

    by Admir Masic, Dahyun Kyung, Ruiqi Zhang, Alice Zehner, Ali Alatawi, Noora Jamsheer, James Weaver, Kristin Bergmann, Vladimir Bulovic, Adam Jost

    Pearls are nacreous biogenic products that can be classified by whether they are natural or cultured, what species of mollusk produced them, and what environment they were grown in. Due to the subtle compositional and morphological differences between pearl types, determining pearl provenance can be problematic. To address these challenges, in this study we introduce a pearl identification workflow combining stable isotope analysis of pearl carbonate minerals to identify their geographic origin, and a Raman spectroscopy-based machine learning model to determine pearl species. Stable isotope data reveal clustering in δ18O based on the geographic origin of saltwater pearls. Additionally, pearl oyster shells from the Arabian Gulf were used as a tractable model system to investigate links between seawater geochemistry and carbonate stable isotope signatures. Paralleling these studies, Raman spectra of pearls formed by P. radiata, P. maxima, and P. fucata oysters were utilized to train a support vector machine classifier to predict pearl species with 96.4% accuracy. The combined results from these investigations demonstrate their utility in tracing pearl provenance by identifying geography and species of origin, which could be employed at a larger scale to improve pearl classification and provide insights into the formation mechanisms of biogenic carbonates.

  • Oxygen Vacancy Formation in ZnSeTe Blue Quantum Dot Light-Emitting Diodes

    by Shaun Tan, Sujin Park, Seung-Gu Choi, Oliver J. Tye, Ruiqi Zhang, Jonah R. Horowitz, Tanguy Terlier, Heejae Chung, Vladimir Bulović, Jeonghun Kwak, et al.

    Recent advancements have led to the development of bright and heavy metal-free blue-emitting quantum dot light-emitting diodes (QLEDs). However, consensus understanding of their distinct photophysical and electroluminescent dynamics remains elusive. This work correlates the chemical and electronic changes occurring in a QLED during operation using depth-resolved and operando techniques. The results indicate that oxygen vacancies form in the ZnMgO layer during operation, with important implications on the charge injection and electrochemical dynamics. Taken together, the results suggest a causal relationship between oxygen vacancy formation and operational degradation of the blue-emitting ZnSeTe-based QLEDs.


  • Open Access

    Electric Field Inhomogeneity in Colloidal QD‐LEDs

    by Shreyas Srinivasan, Ruiqi Zhang, Mike Dillender, Thienan Nguyen, Madeleine Laitz, Taehyung Kim, Kwang‐Hee Kim, Tae‐Gon Kim, Moungi Bawendi, Vladimir Bulović

    It is demonstrated that the electroluminescent layer in a colloidal quantum dot light emitting diode (QD‐LED), formed by stochastic methods such as spin‐coating, incorporates morphological thickness inhomogeneities, resulting in local electric field variations. These inhomogeneities can be directly visualized and quantified using confocal micro‐photoluminescence (PL) and micro‐electroluminescence (EL), as showed in QD‐LEDs with stochastically processed InP/ZnSe/ZnS colloidal quantum dots (QDs). Around 5% of the device shows EL darkspots under forward bias and PL hotspots under photoexcitation, with a strong spatial correlation between these features. The PL hotspots (EL darkspots) correspond to thicker regions in the stochastically‐processed QD film. This thickness variation leads to two distinct QD sub‐populations responding differently to optical excitation. Time and energy‐resolved spectral diffusion measurements reveal that most excitons belong to a “more‐mobile” sub‐population with fast energy transfer and short, electric field‐dependent lifetimes, while a smaller fraction belongs to a “less‐mobile” sub‐population with slower energy transfer and longer, electric field‐independent lifetimes. The “less‐mobile” excitons correlate with thicker QD regions. These findings shed light on the local electric field inhomogeneity in QD‐LEDs, offering insights into device operation, possible degradation mechanisms, and strategies for developing stochastically‐processed micro‐QD‐LEDs.


  • Top Cited Papers

    Spontaneous formation of robust two-dimensional perovskite phases

    by Shaun Tan, Meng-Chen Shih, Yongli Lu, Seung-Gu Choi, Yifan Dong, Joo-Hong Lee, Ilhan Yavuz, Bryon W. Larson, So Yeon Park, Tim Kodalle, et al.

    The two-dimensional on three-dimensional (2D/3D) perovskite bilayer heterostructure can improve the stability and performance of perovskite solar cells. We show that the 2D/3D perovskite stack in a device evolves dynamically during its end-of-life decomposition. Initially phase-pure 2D interlayers can evolve differently, resulting in different device stabilities. We show that a robust 2D interlayer can be formed using mixed solvents to regulate its crystallinity and phase purity. The resulting 2D/3D devices achieved 25.9% efficiency and had good durability, retaining 91% of their initial performance after 1074 hours at 85°C using maximum power point tracking.


  • Machine Learning Prediction of Organic–Inorganic Halide Perovskite Solar Cell Performance from Optical Properties

    by Ruiqi Zhang, Brandon Motes, Shaun Tan, Yongli Lu, Meng-Chen Shih, Yilun Hao, Karen Yang, Shreyas Srinivasan, Moungi G. Bawendi, Vladimir Bulović


  • Open Access

    Rational Design of a Chemical Bath Deposition Based Tin Oxide Electron‐Transport Layer for Perovskite Photovoltaics

    by Yongli Lu, Meng‐Chen Shih, Shaun Tan, Matthias J. Grotevent, Lili Wang, Hua Zhu, Ruiqi Zhang, Joo‐Hong Lee, Jin‐Wook Lee, Vladimir Bulović, et al.

  • Co-pyrolysis mechanism of PP and PET under steam atmosphere

    by Kuntong Song, Yi Li, Nan Wang, Wenxia Hou, Ruiqi Zhang, Junhong Liu, Qing Zhou, Dongxia Yan, Xingmei Lu


  • Open Access

    Globally-Optimal Inlier Maximization for Relative Pose Estimation Under Planar Motion

    by Haotian Liu, Guang Chen, Yinlong Liu, Zichen Liang, Ruiqi Zhang, Alois Knoll

    Planar motion constraint occurs in visual odometry (VO) and SLAM for Automated Guided Vehicles (AGVs) or mobile robots in general. Conventionally, two-point solvers can be nested to RANdom SAmple Consensus to reject outliers in real data, but the performance descends when the ratio of outliers goes high. This study proposes a globally-optimal Branch-and-Bound (BnB) solver for relative pose estimation under general planar motion, which aims to figure out the globally-optimal solution even under a quite noisy environment. Through reasonable modification of the motion equation, we decouple the relative pose into relative rotation and translation so that a simplified bounding strategy can be applied. It enhances the efficiency of the BnB technique. Experimental results support the global optimality and demonstrate that the proposed method performs more robustly than existing approaches. In addition, the proposed algorithm outperforms state-of-art methods in global optimality under the varying level of outliers.