Azzedine Bouaraba
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Azzedine Bouaraba has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Karima Hadj-Rabah
Department of Geoinformatics Z_GIS, University of Salzburg, 5020 Salzburg, Austria
4 shared publications - Gilda Schirinzi
University of Naples Parthenope
3 shared publications - Aichouche Belhadj-Aissa
University of Sciences and Technology Houari Boumediene
2 shared publications - Alessandra Budillon
Department of Engineering, Universit degli Studi di Napoli Parthenope, Naples, Italy
2 shared publications - Ayoub Boutemedjet
Ecole Militaire Polytechnique
2 shared publications - Lekhmissi Harkati
Radar Laboratory, Ecole Militaire Polytechnique, Algiers, Algeria
2 shared publications
Latest Publications
- 13 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. PP (15361225) , 1-5
Circularly Polarized Array Antenna for Polarimetric SAR Application
In this letter, the design, simulation and measurement of a novel circularly polarized array antenna for polarimetric synthetic aperture radar (PolSAR) applications in the C-band are presented. A low-cost and compact solution is achieved by employing microstrip technology. More precisely, a multilayer configuration is adopted, where the sequential rotation technique, combined with the use of slotted parasitic elements in a stacked arrangement, ensures wideband operation and high polarization purity. The proposed array antenna exhibits compact dimensions (62 mm × 62mm × 13mm) with low weight of only 56 g. Measurements performed on a fabricated prototype show that the $|S_{11}|$ parameter remains below -10 dB from 4.82 GHz to 7.62 GHz (corresponding to a 45% bandwidth), with the axial ratio below 3 dB from 4.95 GHz to 6.85 GHz (corresponding to a 32% bandwidth), which is fully encompassed by the impedance bandwidth. Moreover, the measured far-field patterns in the anechoic chamber are in excellent agreement with the simulated results. Hence, the proposed array antenna represents a promising candidate for PolSAR systems, where challenging radiation requirements coexist with stringent compactness constraints.
- 13 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. PP (15361225) , 1-5
Circularly Polarized Array Antenna for Polarimetric SAR Application
In this letter, the design, simulation and measurement of a novel circularly polarized array antenna for polarimetric synthetic aperture radar (PolSAR) applications in the C-band are presented. A low-cost and compact solution is achieved by employing microstrip technology. More precisely, a multilayer configuration is adopted, where the sequential rotation technique, combined with the use of slotted parasitic elements in a stacked arrangement, ensures wideband operation and high polarization purity. The proposed array antenna exhibits compact dimensions (62 mm × 62mm × 13mm) with low weight of only 56 g. Measurements performed on a fabricated prototype show that the $|S_{11}|$ parameter remains below -10 dB from 4.82 GHz to 7.62 GHz (corresponding to a 45% bandwidth), with the axial ratio below 3 dB from 4.95 GHz to 6.85 GHz (corresponding to a 32% bandwidth), which is fully encompassed by the impedance bandwidth. Moreover, the measured far-field patterns in the anechoic chamber are in excellent agreement with the simulated results. Hence, the proposed array antenna represents a promising candidate for PolSAR systems, where challenging radiation requirements coexist with stringent compactness constraints.
- Open Access
- 25 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 63 (01962892) , 1-13
Adaptive Coherent Multilook GLRT for SAR Tomography Detection
In recent years, generalized likelihood ratio test (GLRT) scatterers’ detection in the context of synthetic aperture radar tomography (TomoSAR) has gained great interest from the remote sensing scientific community. This is due to its effectiveness in identifying scatterers within each single azimuth–range resolution cell, particularly in urban areas. The multilook GLRT (M-GLRT) variant offers more satisfactory results at the expense of spatial resolution deterioration, by jointly exploiting the neighboring information of the pixel to be reconstructed. In this context, coherent and incoherent formulations can be adopted. The former provides better performance in the assumption of constant reflectivity of the pixels in the considered neighborhood, while the latter is much more robust with respect to the violation of this assumption. In this article, an adaptive formulation of the coherent and incoherent GLRT is presented with the aim of improving scatterers’ detection and their height estimation. The method is based on an adaptive window setting, to select adjacent pixels with similar height and reflectivity characteristics. A detailed study and analysis of the proposed adaptive coherent M-GLRT (ACM-GLRT) detector has been conducted and validated through simulations along with comparison to both standard and adaptive formulations of incoherent M-GLRT. Experimental findings from a real dataset acquired by the German TerraSAR-X (TSX) over the city of Naples (Italy) demonstrate the performance improvement of our proposed approach.
- 25 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 63 (01962892) , 1-13
Open AccessAdaptive Coherent Multilook GLRT for SAR Tomography Detection
In recent years, generalized likelihood ratio test (GLRT) scatterers’ detection in the context of synthetic aperture radar tomography (TomoSAR) has gained great interest from the remote sensing scientific community. This is due to its effectiveness in identifying scatterers within each single azimuth–range resolution cell, particularly in urban areas. The multilook GLRT (M-GLRT) variant offers more satisfactory results at the expense of spatial resolution deterioration, by jointly exploiting the neighboring information of the pixel to be reconstructed. In this context, coherent and incoherent formulations can be adopted. The former provides better performance in the assumption of constant reflectivity of the pixels in the considered neighborhood, while the latter is much more robust with respect to the violation of this assumption. In this article, an adaptive formulation of the coherent and incoherent GLRT is presented with the aim of improving scatterers’ detection and their height estimation. The method is based on an adaptive window setting, to select adjacent pixels with similar height and reflectivity characteristics. A detailed study and analysis of the proposed adaptive coherent M-GLRT (ACM-GLRT) detector has been conducted and validated through simulations along with comparison to both standard and adaptive formulations of incoherent M-GLRT. Experimental findings from a real dataset acquired by the German TerraSAR-X (TSX) over the city of Naples (Italy) demonstrate the performance improvement of our proposed approach.
- 30 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Geoscience and Remote Sensing Letters
- Vol. 22 (1545598X) , 1-5
Covariance Matrix Estimation via Geometric Median in Highly Heterogeneous PolSAR Images
The Wishart distribution is a well-established statistical model for characterizing the density of random variables in Polarimetric SAR (PolSAR) data, particularly within homogeneous regions where Gaussian assumptions hold. However, as PolSAR applications expand into heterogeneous environments, alternative statistical models have been developed to better capture the complexity of such areas, playing an important role in tasks such as classification. In this study, we examine the effectiveness of covariance matrix estimation using the median matrix, a technique grounded in optimal transport theory and validated in prior research for its effectiveness. Building on this foundation, we propose the application of a statistical model tailored for heterogeneous regions, i.e., following the G0P distribution, addressing the limitations of traditional assumptions. This method is particularly suitable for high-resolution PolSAR datasets, where the homogeneity hypothesis often does not hold. The experimental results obtained using L-band PolSAR images acquired over Foulum in Denmark demonstrate the robustness of our proposed variant.
- 30 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Geoscience and Remote Sensing Letters
- Vol. 22 (1545598X) , 1-5
Covariance Matrix Estimation via Geometric Median in Highly Heterogeneous PolSAR Images
The Wishart distribution is a well-established statistical model for characterizing the density of random variables in Polarimetric SAR (PolSAR) data, particularly within homogeneous regions where Gaussian assumptions hold. However, as PolSAR applications expand into heterogeneous environments, alternative statistical models have been developed to better capture the complexity of such areas, playing an important role in tasks such as classification. In this study, we examine the effectiveness of covariance matrix estimation using the median matrix, a technique grounded in optimal transport theory and validated in prior research for its effectiveness. Building on this foundation, we propose the application of a statistical model tailored for heterogeneous regions, i.e., following the G0P distribution, addressing the limitations of traditional assumptions. This method is particularly suitable for high-resolution PolSAR datasets, where the homogeneity hypothesis often does not hold. The experimental results obtained using L-band PolSAR images acquired over Foulum in Denmark demonstrate the robustness of our proposed variant.
- 24 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Geoscience and Remote Sensing Letters
- Vol. 21 (1545598X) , 1-5
Gridless GLRT for Tomographic SAR Detection Using Particle Swarm Optimization Algorithm
The detection of multiple scatterers within each resolution cell is an open research subject in Synthetic Aperture Radar tomography. For over a decade, the Generalised Likelihood Ratio Test (GLRT) detector has been implemented along with its variants, allowing the generation of height maps and 3D point clouds with good precision. However, they are limited by the grid search during the optimization of the Maximum Likelihood function. In order to mitigate this, we propose a gridless version of GLRT where the Particle Swarm Optimization (PSO) method is used to locate the minima. The conducted analysis of the proposed detector with respect to the state-of-the-art methods behavior on simulated and real datasets proved the effectiveness of PSO-GLRT in terms of height accuracy and computational cost. The evaluation metrics Root Mean Square Error, Accuracy, and Completeness have been used as a quantitative improvement indicator for estimated height assessment.
- 24 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Geoscience and Remote Sensing Letters
- Vol. 21 (1545598X) , 1-5
Gridless GLRT for Tomographic SAR Detection Using Particle Swarm Optimization Algorithm
The detection of multiple scatterers within each resolution cell is an open research subject in Synthetic Aperture Radar tomography. For over a decade, the Generalised Likelihood Ratio Test (GLRT) detector has been implemented along with its variants, allowing the generation of height maps and 3D point clouds with good precision. However, they are limited by the grid search during the optimization of the Maximum Likelihood function. In order to mitigate this, we propose a gridless version of GLRT where the Particle Swarm Optimization (PSO) method is used to locate the minima. The conducted analysis of the proposed detector with respect to the state-of-the-art methods behavior on simulated and real datasets proved the effectiveness of PSO-GLRT in terms of height accuracy and computational cost. The evaluation metrics Root Mean Square Error, Accuracy, and Completeness have been used as a quantitative improvement indicator for estimated height assessment.
- 4 September 2024
- Published by Taylor & Francis in The Imaging Science Journal
- Vol. 73 (3) , 381-400
Efficient and robust techniques for infrared imaging system correction
Infrared imaging is a technology used to capture and visualize infrared radiation emitted or reflected by objects. It is widely employed in various industries, including remote sensing, medical dia...
- 4 September 2024
- Published by Taylor & Francis in The Imaging Science Journal
- Vol. 73 (3) , 381-400
Efficient and robust techniques for infrared imaging system correction
Infrared imaging is a technology used to capture and visualize infrared radiation emitted or reflected by objects. It is widely employed in various industries, including remote sensing, medical dia...
- 30 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Geoscience and Remote Sensing Letters
- Vol. 21 (1545598X) , 1-5
Generalized Parametric Iterative Approach for Tomographic SAR Reconstruction
The reconstruction of high-elevation natural and artificial structures through Synthetic Aperture Radar (SAR) tomography has been an active research topic owing to its significance in various earth science applications. However, the complexity of this task arises from inaccuracies in the estimated reconstruction, attributed to factors such as low signal-to-noise ratios, decorrelations, few and uneven measurements, and overlapping scatterers. The utilization of iterative spectral estimation methods has been demonstrated to be beneficial in addressing some of these inaccuracies. Thus, selecting the best method within this class constitutes a challenge. In this context, our letter aims to propose a generalized formula linking the maximum likelihood-based iterative methods via a regularization parameter. The behavior of the latter is analyzed for several values in order to unveil the potential of the proposed approach in achieving a balance between noise reduction and detection performance. The experimental study has been conducted on simulated and real SAR data acquired by airborne and spaceborne systems covering tropical forest and build-up areas. The obtained results show the effectiveness and performance of the optimal regularization parameter to eliminate noise while preserving scatterers’ contribution.
- 30 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Geoscience and Remote Sensing Letters
- Vol. 21 (1545598X) , 1-5
Generalized Parametric Iterative Approach for Tomographic SAR Reconstruction
The reconstruction of high-elevation natural and artificial structures through Synthetic Aperture Radar (SAR) tomography has been an active research topic owing to its significance in various earth science applications. However, the complexity of this task arises from inaccuracies in the estimated reconstruction, attributed to factors such as low signal-to-noise ratios, decorrelations, few and uneven measurements, and overlapping scatterers. The utilization of iterative spectral estimation methods has been demonstrated to be beneficial in addressing some of these inaccuracies. Thus, selecting the best method within this class constitutes a challenge. In this context, our letter aims to propose a generalized formula linking the maximum likelihood-based iterative methods via a regularization parameter. The behavior of the latter is analyzed for several values in order to unveil the potential of the proposed approach in achieving a balance between noise reduction and detection performance. The experimental study has been conducted on simulated and real SAR data acquired by airborne and spaceborne systems covering tropical forest and build-up areas. The obtained results show the effectiveness and performance of the optimal regularization parameter to eliminate noise while preserving scatterers’ contribution.
- 3 April 2024
- Published by World Scientific Pub Co Pte Ltd in Unmanned Systems
- Vol. 13 (02) , 561-577
Innovative Stripe Noise Image Correction Method for Remote Sensing
Due to their propensity for stripe noise distortions, infrared remote sensing images present substantial difficulty for interpretation. Our ability to address this issue by offering an easy, efficient, and fast technique for image stripe noise correction is what makes our work unique. Our proposed solution tackles stripe noise by subtracting the mean value along the stripes from the noisy image. Additionally, we leverage the wavelet transform on the average signal to exploit the inherent sparsity of noise in the wavelet domain. This approach not only enhances denoising performance without introducing blurring effects but also enables us to recover image details with remarkable precision, all without the need for intricate algorithms, iterative processes, or training models. To validate the effectiveness of our approach, we conducted evaluations using a dataset of real-world infrared remote sensing images. This dataset encompasses a wide range of examples, featuring both real and artificially induced noise scenarios.
- 3 April 2024
- Published by World Scientific Pub Co Pte Ltd in Unmanned Systems
- Vol. 13 (02) , 561-577
Innovative Stripe Noise Image Correction Method for Remote Sensing
Due to their propensity for stripe noise distortions, infrared remote sensing images present substantial difficulty for interpretation. Our ability to address this issue by offering an easy, efficient, and fast technique for image stripe noise correction is what makes our work unique. Our proposed solution tackles stripe noise by subtracting the mean value along the stripes from the noisy image. Additionally, we leverage the wavelet transform on the average signal to exploit the inherent sparsity of noise in the wavelet domain. This approach not only enhances denoising performance without introducing blurring effects but also enables us to recover image details with remarkable precision, all without the need for intricate algorithms, iterative processes, or training models. To validate the effectiveness of our approach, we conducted evaluations using a dataset of real-world infrared remote sensing images. This dataset encompasses a wide range of examples, featuring both real and artificially induced noise scenarios.
- 19 February 2024
- Published by World Scientific Pub Co Pte Ltd in Journal of Nonlinear Optical Physics & Materials
- Vol. 34 (04)
Kerr effect optimization in acetone-immersed optical nanofibers
Nanoscale optical fibers, capable of confining light at the nanoscale, exhibit nonlinear effects and generate a strong evanescent field interacting with the surrounding environment. In this study, we compared various nanofibers composed of different glasses, closely matching the refractive index of silica, while immersed in acetone. Our objective was to optimize the Kerr effect contributions from either the core or the cladding, dependent on factors such as nanofiber dimensions, core optical properties, and the effective area of the fundamental mode HE[ ] both inside and outside the nanofiber core. Our findings reveal that the fluorophosphate (S-FPM3) nanofiber exhibits a dominant Kerr effect when immersed in acetone compared to the silica nanofiber. Specifically, for a radius [ ][ ]nm, the S-FPM3 nanofiber core demonstrates a Kerr coefficient [ ], three times higher than that of the silica nanofiber. Similarly, for [ ], the Kerr coefficient [ ] for the S-FPM3 nanofiber cladding is three times greater than that of the silica nanofiber, despite both having nearly identical nonlinear indices. Additionally, we observed that Kerr coefficients follow similar variations across different wavelengths in the visible and infrared regions, with values decreasing significantly due to the inverse proportionality with optical wavelength [ ]. Analyzing the dynamics of nanofiber normalized diameter reveals a sub-wavelength threshold optimizing effective nonlinearity, particularly in the case of the NC21A nanofiber. These findings suggest the potential use of optical nanofibers as reliable sensors in challenging-to-access areas for external media and the enhancement of nonlinear effects through the evanescent field.
- 19 February 2024
- Published by World Scientific Pub Co Pte Ltd in Journal of Nonlinear Optical Physics & Materials
- Vol. 34 (04)
Kerr effect optimization in acetone-immersed optical nanofibers
Nanoscale optical fibers, capable of confining light at the nanoscale, exhibit nonlinear effects and generate a strong evanescent field interacting with the surrounding environment. In this study, we compared various nanofibers composed of different glasses, closely matching the refractive index of silica, while immersed in acetone. Our objective was to optimize the Kerr effect contributions from either the core or the cladding, dependent on factors such as nanofiber dimensions, core optical properties, and the effective area of the fundamental mode HE[ ] both inside and outside the nanofiber core. Our findings reveal that the fluorophosphate (S-FPM3) nanofiber exhibits a dominant Kerr effect when immersed in acetone compared to the silica nanofiber. Specifically, for a radius [ ][ ]nm, the S-FPM3 nanofiber core demonstrates a Kerr coefficient [ ], three times higher than that of the silica nanofiber. Similarly, for [ ], the Kerr coefficient [ ] for the S-FPM3 nanofiber cladding is three times greater than that of the silica nanofiber, despite both having nearly identical nonlinear indices. Additionally, we observed that Kerr coefficients follow similar variations across different wavelengths in the visible and infrared regions, with values decreasing significantly due to the inverse proportionality with optical wavelength [ ]. Analyzing the dynamics of nanofiber normalized diameter reveals a sub-wavelength threshold optimizing effective nonlinearity, particularly in the case of the NC21A nanofiber. These findings suggest the potential use of optical nanofibers as reliable sensors in challenging-to-access areas for external media and the enhancement of nonlinear effects through the evanescent field.
- 1 October 2019
- Published by Elsevier in Journal of Atmospheric and Solar-Terrestrial Physics
- Vol. 193, 105092
Ionosphere modeling in the context of Algerian Satellite-based Augmentation System
- 1 October 2019
- Published by Elsevier in Journal of Atmospheric and Solar-Terrestrial Physics
- Vol. 193, 105092
Ionosphere modeling in the context of Algerian Satellite-based Augmentation System