Fariba Esperouz
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Fariba Esperouz has a total of 88 co-authors. Here are the top co-authors by number of shared publications:
- Domenico Ciavarella
Department of Clinical and Experimental Medicine University of Foggia Foggia Italy
19 shared publications - Lucio Lo Russo
Department of Clinical and Experimental medicine, Dental School of Foggia, University of Foggia, 71122 Foggia, Italy
19 shared publications - Mauro Lorusso
Department of Clinical and Experimental medicine, Dental School of Foggia, University of Foggia, 71122 Foggia, Italy
18 shared publications - Michele Tepedino
Department of Biotechnological and Applied Clinical Sciences, Dental School of L’Aquila, University of L’Aquila, 67100 L’Aquila, Italy
13 shared publications Lucio Lo Russo
Department of Clinical and Experimental Medicine University of Foggia Foggia Italy
9 shared publicationsDomenico Ciavarella
Department of Clinical and Experimental Medicine, School of Dentistry, University of Foggia, 71121 Foggia
7 shared publications
Latest Publications
- Open Access
- 12 October 2026
- Published by MDPI AG in Dentistry Journal
- Vol. 14 (10) , 664
Biomechanical Assessment of a Novel Self-Ligating Orthodontic Bracket Using Finite Element Analysis: The LUMACA System
Objectives: This study aimed to comparatively assess, using a two-dimensional static finite element analysis (FEA), the initial biomechanical response associated with two LUMACA bracket configurations and a conventional bracket configuration under identical loading and modelling conditions. Methods: A two-dimensional finite element model comprising the tooth, cortical and trabecular bone, and periodontal ligament (PDL) was constructed using COMSOL Multiphysics. Three configurations were simulated under a palato-vestibular load: (1) the LUMACA bracket in the standard position, (2) the LUMACA bracket in a gingival (apical) position, and (3) a conventional bracket in the standard position. Each configuration was analysed at five force levels ranging from 0.25 to 2.00 N, with 1.47 N used as the reference load. Von Mises stress, longitudinal and transverse strain distributions, and the displacements of coronal and apical probe points were analysed to characterise the mechanical response and tooth-movement pattern. Results: In all three configurations, the crown and apex moved in the same direction and the centre of rotation lay beyond the root apex; therefore, all configurations produced controlled tipping. The apex-to-crown ratio of the displacement components along the applied load, which equals 1 for pure bodily translation and 0 for rotation about the apex, was 0.771 for the gingivally bonded LUMACA bracket, 0.469 for the LUMACA bracket in the standard position, and 0.227 for the conventional bracket. The corresponding centres of rotation were located 37.0, 9.7, and 3.2 mm beyond the root apex, respectively. Under a load of 1.47 N, the differential displacement between the crown and apex was 0.050, 0.211, and 0.516 micrometres, respectively; thus, the conventional bracket produced approximately ten times the differential displacement observed with the gingivally bonded LUMACA bracket. The response was linear across the entire force range examined, indicating that the ranking of the three configurations was independent of load magnitude. Conclusions: Bracket slot position substantially influenced the biomechanical response of the tooth–PDL complex. The apically bonded LUMACA bracket displaced the centre of rotation farther beyond the root apex and produced a more uniform PDL deformation pattern than the conventional design. The calculated stress distributions and displacements should be interpreted as comparative metrics between bracket configurations and not as direct predictors of clinical outcomes.
- 12 October 2026
- Published by MDPI AG in Dentistry Journal
- Vol. 14 (10) , 664
Open AccessBiomechanical Assessment of a Novel Self-Ligating Orthodontic Bracket Using Finite Element Analysis: The LUMACA System
Objectives: This study aimed to comparatively assess, using a two-dimensional static finite element analysis (FEA), the initial biomechanical response associated with two LUMACA bracket configurations and a conventional bracket configuration under identical loading and modelling conditions. Methods: A two-dimensional finite element model comprising the tooth, cortical and trabecular bone, and periodontal ligament (PDL) was constructed using COMSOL Multiphysics. Three configurations were simulated under a palato-vestibular load: (1) the LUMACA bracket in the standard position, (2) the LUMACA bracket in a gingival (apical) position, and (3) a conventional bracket in the standard position. Each configuration was analysed at five force levels ranging from 0.25 to 2.00 N, with 1.47 N used as the reference load. Von Mises stress, longitudinal and transverse strain distributions, and the displacements of coronal and apical probe points were analysed to characterise the mechanical response and tooth-movement pattern. Results: In all three configurations, the crown and apex moved in the same direction and the centre of rotation lay beyond the root apex; therefore, all configurations produced controlled tipping. The apex-to-crown ratio of the displacement components along the applied load, which equals 1 for pure bodily translation and 0 for rotation about the apex, was 0.771 for the gingivally bonded LUMACA bracket, 0.469 for the LUMACA bracket in the standard position, and 0.227 for the conventional bracket. The corresponding centres of rotation were located 37.0, 9.7, and 3.2 mm beyond the root apex, respectively. Under a load of 1.47 N, the differential displacement between the crown and apex was 0.050, 0.211, and 0.516 micrometres, respectively; thus, the conventional bracket produced approximately ten times the differential displacement observed with the gingivally bonded LUMACA bracket. The response was linear across the entire force range examined, indicating that the ranking of the three configurations was independent of load magnitude. Conclusions: Bracket slot position substantially influenced the biomechanical response of the tooth–PDL complex. The apically bonded LUMACA bracket displaced the centre of rotation farther beyond the root apex and produced a more uniform PDL deformation pattern than the conventional design. The calculated stress distributions and displacements should be interpreted as comparative metrics between bracket configurations and not as direct predictors of clinical outcomes.
- Open Access
- 20 July 2026
- Published by Wiley in Journal of Oral Pathology & Medicine
- Vol. 55 (9) , 1008-1018
Oral and Pancreatobiliary Microbiota in Cancer: A Systematic Review of Compositional Alterations and Their Clinical Implications
Background: Associations between microbial dysbiosis and malignancies of the pancreatobiliary system have been described in recent studies. As a result of the limited number of studies that have been done specifically on the malignancies of the biliary tract, information regarding oral, biliary and tumour‐related microbial alterations was combined to provide an overview of the microbial changes that may occur. Methods: Studies that involved observations on the composition or presence of dysbiosis of the microbiota from oral (saliva, oral rinse, dental plaque) or other non‐oral specimens (bile, pancreatic tissue, duodenal tissue and bacteria‐derived extracellular vesicles from plasma) in patients with pancreatobiliary malignancies were considered. The risk of bias was evaluated using the Newcastle‐Ottawa Scale (NOS) for case–control study designs and the JBI Checklist for cross‐sectional studies. Results: There were a total of 16 studies involving 1426 participants that were conducted using both case–control and cross‐sectional study designs. Samples were collected from saliva, oral wash, bile, pancreatic and duodenal tissues and bacterial extracellular vesicles isolated from plasma samples. The most common method used was 16S rRNA sequencing, and two used shotgun metagenomics. In all the studies, patients with pancreatobiliary cancers, especially PDAC, had a significantly higher abundance of opportunistic microbes like Streptococcus, Veillonella, Fusobacterium, Prevotella and a lower abundance of commensal bacteria like Neisseria and Corynebacterium. There was overlap of microbial profile in the oral cavity and tumour/bile compartments in a few studies. Conclusions: Although the current data is preliminary and observational in nature, there are consistent findings linking microbiota dysbiosis with cancers of the pancreatobiliary region within both oral and non‐oral body sites. Causality has not been established yet. The use of microbial signatures as a basis for biomarker development is a promising research direction.
- 20 July 2026
- Published by Wiley in Journal of Oral Pathology & Medicine
- Vol. 55 (9) , 1008-1018
Open AccessOral and Pancreatobiliary Microbiota in Cancer: A Systematic Review of Compositional Alterations and Their Clinical Implications
Background: Associations between microbial dysbiosis and malignancies of the pancreatobiliary system have been described in recent studies. As a result of the limited number of studies that have been done specifically on the malignancies of the biliary tract, information regarding oral, biliary and tumour‐related microbial alterations was combined to provide an overview of the microbial changes that may occur. Methods: Studies that involved observations on the composition or presence of dysbiosis of the microbiota from oral (saliva, oral rinse, dental plaque) or other non‐oral specimens (bile, pancreatic tissue, duodenal tissue and bacteria‐derived extracellular vesicles from plasma) in patients with pancreatobiliary malignancies were considered. The risk of bias was evaluated using the Newcastle‐Ottawa Scale (NOS) for case–control study designs and the JBI Checklist for cross‐sectional studies. Results: There were a total of 16 studies involving 1426 participants that were conducted using both case–control and cross‐sectional study designs. Samples were collected from saliva, oral wash, bile, pancreatic and duodenal tissues and bacterial extracellular vesicles isolated from plasma samples. The most common method used was 16S rRNA sequencing, and two used shotgun metagenomics. In all the studies, patients with pancreatobiliary cancers, especially PDAC, had a significantly higher abundance of opportunistic microbes like Streptococcus, Veillonella, Fusobacterium, Prevotella and a lower abundance of commensal bacteria like Neisseria and Corynebacterium. There was overlap of microbial profile in the oral cavity and tumour/bile compartments in a few studies. Conclusions: Although the current data is preliminary and observational in nature, there are consistent findings linking microbiota dysbiosis with cancers of the pancreatobiliary region within both oral and non‐oral body sites. Causality has not been established yet. The use of microbial signatures as a basis for biomarker development is a promising research direction.
- Open Access
- 19 July 2026
- Published by Wiley in Clinical and Experimental Dental Research
- Vol. 12 (4) , e70401
Inflammation, Hypoxia, and Periodontal Breakdown: The Association Between Obstructive Sleep Apnea and Periodontitis; Results From a Systematic Review With Meta‐Analysis
Objective: This systematic review and meta‐analysis aimed to evaluate the association between obstructive sleep apnea and periodontitis and to quantify the magnitude of this relationship based on the available evidence. Methods: A systematic literature search was conducted in PubMed, Scopus, and Web of Science up to November 2025, following PRISMA 2020 guidelines. Observational studies investigating the association between OSA and periodontitis in human adults were included. Study quality was assessed using the ROBINS‐I tool. A random‐effects meta‐analysis was performed to pool odds ratios (ORs) with 95% confidence intervals (CIs). Additionally, Spearman correlation coefficients were synthesized when available. Results: Twenty‐three studies were included in the qualitative synthesis, and 18 studies were eligible for quantitative analysis. The pooled meta‐analysis demonstrated that OSA was significantly associated with an increased risk of periodontitis (OR = 2.22; 95% CI: 1.78–2.77), with moderate heterogeneity ( I 2 = 57.4%). Furthermore, a random‐effects meta‐analysis of correlation coefficients revealed a moderate positive association between OSA and periodontal disease severity ( r = 0.39; 95% CI: 0.17–0.58). These findings were consistent across different populations and diagnostic approaches, particularly in studies using polysomnography for OSA assessment. Conclusions: The present meta‐analysis provides evidence of a significant association between obstructive sleep apnea and periodontitis, with patients affected by OSA showing more than twice the risk of developing periodontal disease. Although causality cannot be established due to the observational nature of the included studies, shared inflammatory and microbiological pathways support a biologically plausible link. An interdisciplinary approach involving dental and sleep medicine professionals may be beneficial for early diagnosis and comprehensive management of both conditions.
- 19 July 2026
- Published by Wiley in Clinical and Experimental Dental Research
- Vol. 12 (4) , e70401
Open AccessInflammation, Hypoxia, and Periodontal Breakdown: The Association Between Obstructive Sleep Apnea and Periodontitis; Results From a Systematic Review With Meta‐Analysis
Objective: This systematic review and meta‐analysis aimed to evaluate the association between obstructive sleep apnea and periodontitis and to quantify the magnitude of this relationship based on the available evidence. Methods: A systematic literature search was conducted in PubMed, Scopus, and Web of Science up to November 2025, following PRISMA 2020 guidelines. Observational studies investigating the association between OSA and periodontitis in human adults were included. Study quality was assessed using the ROBINS‐I tool. A random‐effects meta‐analysis was performed to pool odds ratios (ORs) with 95% confidence intervals (CIs). Additionally, Spearman correlation coefficients were synthesized when available. Results: Twenty‐three studies were included in the qualitative synthesis, and 18 studies were eligible for quantitative analysis. The pooled meta‐analysis demonstrated that OSA was significantly associated with an increased risk of periodontitis (OR = 2.22; 95% CI: 1.78–2.77), with moderate heterogeneity ( I 2 = 57.4%). Furthermore, a random‐effects meta‐analysis of correlation coefficients revealed a moderate positive association between OSA and periodontal disease severity ( r = 0.39; 95% CI: 0.17–0.58). These findings were consistent across different populations and diagnostic approaches, particularly in studies using polysomnography for OSA assessment. Conclusions: The present meta‐analysis provides evidence of a significant association between obstructive sleep apnea and periodontitis, with patients affected by OSA showing more than twice the risk of developing periodontal disease. Although causality cannot be established due to the observational nature of the included studies, shared inflammatory and microbiological pathways support a biologically plausible link. An interdisciplinary approach involving dental and sleep medicine professionals may be beneficial for early diagnosis and comprehensive management of both conditions.
- 6 July 2026
- Published by American Academy of Implant Dentistry in Journal of Oral Implantology
- Vol. -1 (aop)
Clinical accuracy of FDM 3D-printed surgical guides: a focused mini-review
Objective: To provide a focused overview of the current evidence on the accuracy of surgical guides fabricated using fused deposition modeling (FDM) technology and to compare their clinical performance with guides produced using stereolithography (SLA) or other light-curing techniques. Materials and Methods: A structured literature search was conducted in PubMed, Scopus, and Web of Science through January 2026. Studies evaluating the accuracy of implant placement using FDM-printed surgical guides were considered. Due to the limited number of available studies and variability in study designs, a qualitative synthesis of the evidence was performed. Results: Three studies (two in vitro investigations and one randomized controlled clinical trial), involving a total of 150 implants, were included. The available evidence consistently suggests that FDM-printed surgical guides achieve accuracy comparable to SLA or light-curing guides in angular, coronal, and apical deviations. Reported deviations were within clinically acceptable ranges. However, the evidence is limited to simple clinical scenarios, mainly single posterior edentulous sites. Conclusions: FDM-3D-printed surgical guides appear to provide clinically acceptable accuracy and may represent a cost-effective, practical option for guided implant placement in selected cases. Nevertheless, the limited number of studies and the lack of data on complex clinical situations require cautious interpretation. Further clinical research is needed to confirm their reliability across a broader range of implant indications.
- 6 July 2026
- Published by American Academy of Implant Dentistry in Journal of Oral Implantology
- Vol. -1 (aop)
Clinical accuracy of FDM 3D-printed surgical guides: a focused mini-review
Objective: To provide a focused overview of the current evidence on the accuracy of surgical guides fabricated using fused deposition modeling (FDM) technology and to compare their clinical performance with guides produced using stereolithography (SLA) or other light-curing techniques. Materials and Methods: A structured literature search was conducted in PubMed, Scopus, and Web of Science through January 2026. Studies evaluating the accuracy of implant placement using FDM-printed surgical guides were considered. Due to the limited number of available studies and variability in study designs, a qualitative synthesis of the evidence was performed. Results: Three studies (two in vitro investigations and one randomized controlled clinical trial), involving a total of 150 implants, were included. The available evidence consistently suggests that FDM-printed surgical guides achieve accuracy comparable to SLA or light-curing guides in angular, coronal, and apical deviations. Reported deviations were within clinically acceptable ranges. However, the evidence is limited to simple clinical scenarios, mainly single posterior edentulous sites. Conclusions: FDM-3D-printed surgical guides appear to provide clinically acceptable accuracy and may represent a cost-effective, practical option for guided implant placement in selected cases. Nevertheless, the limited number of studies and the lack of data on complex clinical situations require cautious interpretation. Further clinical research is needed to confirm their reliability across a broader range of implant indications.
- Open Access
- 9 April 2026
- Published by MDPI AG in Healthcare
- Vol. 14 (8) , 989
Comparative Dentoskeletal Effects of Two Fixed Systems in Treating Class II Malocclusion: A Retrospective Cohort Study
Objectives: Class II malocclusion is a frequent orthodontic problem in growing patients, and understanding the dentoskeletal effects of different treatment approaches is essential for selecting the most appropriate therapeutic strategy. This study aimed to compare the skeletal and dentoalveolar effects of the Carriere Motion appliance (CMA) and the Rapid Maxillary Expander II (RME II) system in growing patients with Class II malocclusion, using an untreated control group. Methods: This study included 86 growing patients with skeletal Class II Division 1 malocclusion, divided into three groups: RME II (n = 28), CMA (n = 28), and untreated controls (n = 30). Lateral cephalograms were obtained at baseline (T0) and after Class II correction (T1). Skeletal and dentoalveolar variables were assessed, and intergroup differences in treatment changes were analyzed using appropriate statistical tests with correction for multiple comparisons. Results: Both treatment groups showed significantly greater reductions in overjet than the control group, with no significant difference between the two appliances. The CMA group showed a greater reduction in overbite, whereas the RME II group showed greater reductions in the A point–Nasion–B point (ANB) angle and greater increases in mandibular length (Condylion–Gnathion; Co-Gn) compared with both the control and CMA groups. Conclusions: Both appliances were effective in correcting Class II malocclusion during growth. However, the CMA was mainly associated with dentoalveolar correction and vertical changes, whereas the RME II system induced more evident skeletal modifications.
- 9 April 2026
- Published by MDPI AG in Healthcare
- Vol. 14 (8) , 989
Open AccessComparative Dentoskeletal Effects of Two Fixed Systems in Treating Class II Malocclusion: A Retrospective Cohort Study
Objectives: Class II malocclusion is a frequent orthodontic problem in growing patients, and understanding the dentoskeletal effects of different treatment approaches is essential for selecting the most appropriate therapeutic strategy. This study aimed to compare the skeletal and dentoalveolar effects of the Carriere Motion appliance (CMA) and the Rapid Maxillary Expander II (RME II) system in growing patients with Class II malocclusion, using an untreated control group. Methods: This study included 86 growing patients with skeletal Class II Division 1 malocclusion, divided into three groups: RME II (n = 28), CMA (n = 28), and untreated controls (n = 30). Lateral cephalograms were obtained at baseline (T0) and after Class II correction (T1). Skeletal and dentoalveolar variables were assessed, and intergroup differences in treatment changes were analyzed using appropriate statistical tests with correction for multiple comparisons. Results: Both treatment groups showed significantly greater reductions in overjet than the control group, with no significant difference between the two appliances. The CMA group showed a greater reduction in overbite, whereas the RME II group showed greater reductions in the A point–Nasion–B point (ANB) angle and greater increases in mandibular length (Condylion–Gnathion; Co-Gn) compared with both the control and CMA groups. Conclusions: Both appliances were effective in correcting Class II malocclusion during growth. However, the CMA was mainly associated with dentoalveolar correction and vertical changes, whereas the RME II system induced more evident skeletal modifications.
- Open Access
- 1 April 2026
- Published by MDPI AG in Dentistry Journal
- Vol. 14 (4) , 198
Occlusal Force Changes in Growing Patients Treated with the Three Bite Plane Appliance: A Prospective Study
Objective: To investigate the effects of three-bite plane appliance (TBP) therapy on maximal occlusal force (MOF) in growing patients. Methods: This study included 120 children (aged 9–10 years) diagnosed with Class I, Class II, or Class III malocclusion. All subjects presented with a deep bite and a normodivergent growth pattern. MOF was recorded at baseline (T0) and after 12 months of treatment (T1). A standardized multi-bite protocol was used to improve reproducibility. Paired t-tests or Wilcoxon tests assessed intragroup differences, while Welch’s ANOVA with Games–Howell post hoc testing evaluated intergroup variation. Results: Significant intragroup differences were found for all groups (p < 0.001). Class I subjects demonstrated a reduction in MOF (Δ = −138.3 N; p < 0.001), whereas Class II (Δ = 113.35 N; p < 0.001) and Class III (Δ = 145.6 N; p < 0.001) subjects showed significant increases. Intergroup comparison revealed a significant overall difference in MOF change (F = 41.35; p < 0.001). Post hoc analysis confirmed significant differences between Class I and both Class II and III, while no significant difference was detected between Class II and III. Conclusions: Treatment with a three-bite plane appliance modifies MOF in growing patients, showing malocclusion-specific adaptation patterns. The reduction observed in Class I contrasts with the functional enhancement detected in Class II and Class III subjects.
- 1 April 2026
- Published by MDPI AG in Dentistry Journal
- Vol. 14 (4) , 198
Open AccessOcclusal Force Changes in Growing Patients Treated with the Three Bite Plane Appliance: A Prospective Study
Objective: To investigate the effects of three-bite plane appliance (TBP) therapy on maximal occlusal force (MOF) in growing patients. Methods: This study included 120 children (aged 9–10 years) diagnosed with Class I, Class II, or Class III malocclusion. All subjects presented with a deep bite and a normodivergent growth pattern. MOF was recorded at baseline (T0) and after 12 months of treatment (T1). A standardized multi-bite protocol was used to improve reproducibility. Paired t-tests or Wilcoxon tests assessed intragroup differences, while Welch’s ANOVA with Games–Howell post hoc testing evaluated intergroup variation. Results: Significant intragroup differences were found for all groups (p < 0.001). Class I subjects demonstrated a reduction in MOF (Δ = −138.3 N; p < 0.001), whereas Class II (Δ = 113.35 N; p < 0.001) and Class III (Δ = 145.6 N; p < 0.001) subjects showed significant increases. Intergroup comparison revealed a significant overall difference in MOF change (F = 41.35; p < 0.001). Post hoc analysis confirmed significant differences between Class I and both Class II and III, while no significant difference was detected between Class II and III. Conclusions: Treatment with a three-bite plane appliance modifies MOF in growing patients, showing malocclusion-specific adaptation patterns. The reduction observed in Class I contrasts with the functional enhancement detected in Class II and Class III subjects.
- Open Access
- 24 February 2026
- Published by Elsevier in Clinics and Research in Hepatology and Gastroenterology
- Vol. 50 (4) , 102797
How do oral pathogenic bacteria potentially contribute to inflammatory processes in autoimmune liver disease? Results from a systematic review
- 24 February 2026
- Published by Elsevier in Clinics and Research in Hepatology and Gastroenterology
- Vol. 50 (4) , 102797
Open AccessHow do oral pathogenic bacteria potentially contribute to inflammatory processes in autoimmune liver disease? Results from a systematic review
- Open Access
- 20 January 2026
- Published by MDPI AG in Journal of Clinical Medicine
- Vol. 15 (2) , 815
Available Evidence on the Diagnostic Accuracy of Chemiluminescence for Detecting Dysplasia or Malignant Transformation in Oral Potentially Malignant Disorders (OPMDs): A Systematic Review and Meta-Analysis
Background: Oral potentially malignant disorders (OPMDs) often exhibit heterogeneous clinical features, making the early detection of dysplasia very difficult. Several chemiluminescence-based devices, like ViziLite®, have been suggested as non-invasive adjuncts that can enhance the visualization of suspicious mucosal changes. However, their true diagnostic value remains unclear. Methods: A systematic review and meta-analysis were conducted in line with PRISMA 2020 guidelines. Thirteen clinical studies met the inclusion criteria, necessitating chemiluminescence as index test and histopathology as reference standard, with extractable 2 × 2 diagnostic data. For all OPMDs and leukoplakia-only subgroups, pooled sensitivity and specificity, DOR, SROC curves, and device-specific diagnostic accuracy were determined. Results: Of all the OPMDs, chemiluminescence demonstrated a high pooled sensitivity of 0.82 and a low specificity of 0.48 with considerable heterogeneity among studies. The results in the leukoplakia subgroup improved sensitivity of 0.87 and a specificity of 0.51 were recorded with a more concave SROC curve, which illustrated a better discriminative ability in keratinized lesions. Comparison of devices illustrates accuracy was best for ViziLite + Lugol iodine (~0.82) followed by standard ViziLite (~0.62) and ViziLite Plus (~0.53). Conclusions: Chemiluminescence, while it may demonstrate good sensitivity, has repeatedly shown to have limited specificity in a consistent manner, particularly in populations with mixed OPMD where inflammatory and benign lesions inflate the false-positive rates. Notably, diagnostic performance was higher in leukoplakia, suggesting that keratinized lesions benefit most from this adjunctive tool. Overall, chemiluminescence may facilitate lesion visualization and biopsy site selection but cannot supplant histopathological examination as a definitive diagnostic modality.
- 20 January 2026
- Published by MDPI AG in Journal of Clinical Medicine
- Vol. 15 (2) , 815
Open AccessAvailable Evidence on the Diagnostic Accuracy of Chemiluminescence for Detecting Dysplasia or Malignant Transformation in Oral Potentially Malignant Disorders (OPMDs): A Systematic Review and Meta-Analysis
Background: Oral potentially malignant disorders (OPMDs) often exhibit heterogeneous clinical features, making the early detection of dysplasia very difficult. Several chemiluminescence-based devices, like ViziLite®, have been suggested as non-invasive adjuncts that can enhance the visualization of suspicious mucosal changes. However, their true diagnostic value remains unclear. Methods: A systematic review and meta-analysis were conducted in line with PRISMA 2020 guidelines. Thirteen clinical studies met the inclusion criteria, necessitating chemiluminescence as index test and histopathology as reference standard, with extractable 2 × 2 diagnostic data. For all OPMDs and leukoplakia-only subgroups, pooled sensitivity and specificity, DOR, SROC curves, and device-specific diagnostic accuracy were determined. Results: Of all the OPMDs, chemiluminescence demonstrated a high pooled sensitivity of 0.82 and a low specificity of 0.48 with considerable heterogeneity among studies. The results in the leukoplakia subgroup improved sensitivity of 0.87 and a specificity of 0.51 were recorded with a more concave SROC curve, which illustrated a better discriminative ability in keratinized lesions. Comparison of devices illustrates accuracy was best for ViziLite + Lugol iodine (~0.82) followed by standard ViziLite (~0.62) and ViziLite Plus (~0.53). Conclusions: Chemiluminescence, while it may demonstrate good sensitivity, has repeatedly shown to have limited specificity in a consistent manner, particularly in populations with mixed OPMD where inflammatory and benign lesions inflate the false-positive rates. Notably, diagnostic performance was higher in leukoplakia, suggesting that keratinized lesions benefit most from this adjunctive tool. Overall, chemiluminescence may facilitate lesion visualization and biopsy site selection but cannot supplant histopathological examination as a definitive diagnostic modality.
- Open Access
- 1 January 2026
- Published by Wiley in Case Reports in Dentistry
- Vol. 2026 (1)
Interceptive Management of Ectopically Erupting Maxillary Canines With Rapid Maxillary Expansion and Clear Aligners: A Case Report
Objective: Maxillary canine impaction represents one of the most common eruption disturbances in orthodontics after third molars. This case report describes the management of a 9.2‐year‐old growing male patient with bilateral ectopic eruption of the maxillary permanent canines, transverse maxillary deficiency, mesiorotation of the upper first molars, and bilateral Class II molar relationship. The patient was treated according to the BIG‐C concept (Biomechanical Interceptive Guidance of Canine Eruption)—a biomechanically guided interceptive approach combining rapid maxillary expansion, sequential distalization with clear aligners, and arch‐perimeter management. Methods: Radiographic changes were assessed on serial panoramic radiographs using the Ericson and Kurol criteria, including α ‐angle and sector classification at baseline (T0), after RME (T1), and after sequential distalization (T2). Clinical and radiographic follow‐up was continued until eruption and progressive alignment of both permanent canines following interceptive treatment were observed (T3). Results: Both maxillary canines showed progressive radiographic improvement. The α ‐angle decreased from 44.5° to 17.7° for Tooth 1.3 and from 47.1° to 18.7° for Tooth 2.3, corresponding to total reductions of 60.2% and 60.3%, respectively. Sector relationships improved to Sector 1 for both canines, and eruption occurred without surgical exposure or direct orthodontic traction. Conclusions: The combined interceptive protocol, including rapid maxillary expansion followed by sequential distalization with clear aligners, was associated with progressive α ‐angle reduction, improvement in sector relationship, and eruption of both maxillary permanent canines in this case. The contribution of the individual treatment components cannot be determined from this single observation.
- 1 January 2026
- Published by Wiley in Case Reports in Dentistry
- Vol. 2026 (1)
Open AccessInterceptive Management of Ectopically Erupting Maxillary Canines With Rapid Maxillary Expansion and Clear Aligners: A Case Report
Objective: Maxillary canine impaction represents one of the most common eruption disturbances in orthodontics after third molars. This case report describes the management of a 9.2‐year‐old growing male patient with bilateral ectopic eruption of the maxillary permanent canines, transverse maxillary deficiency, mesiorotation of the upper first molars, and bilateral Class II molar relationship. The patient was treated according to the BIG‐C concept (Biomechanical Interceptive Guidance of Canine Eruption)—a biomechanically guided interceptive approach combining rapid maxillary expansion, sequential distalization with clear aligners, and arch‐perimeter management. Methods: Radiographic changes were assessed on serial panoramic radiographs using the Ericson and Kurol criteria, including α ‐angle and sector classification at baseline (T0), after RME (T1), and after sequential distalization (T2). Clinical and radiographic follow‐up was continued until eruption and progressive alignment of both permanent canines following interceptive treatment were observed (T3). Results: Both maxillary canines showed progressive radiographic improvement. The α ‐angle decreased from 44.5° to 17.7° for Tooth 1.3 and from 47.1° to 18.7° for Tooth 2.3, corresponding to total reductions of 60.2% and 60.3%, respectively. Sector relationships improved to Sector 1 for both canines, and eruption occurred without surgical exposure or direct orthodontic traction. Conclusions: The combined interceptive protocol, including rapid maxillary expansion followed by sequential distalization with clear aligners, was associated with progressive α ‐angle reduction, improvement in sector relationship, and eruption of both maxillary permanent canines in this case. The contribution of the individual treatment components cannot be determined from this single observation.
- Open Access
- 1 January 2026
- Published by Wiley in International Journal of Dentistry
- Vol. 2026 (1)
Mandibular Arch Morphology in Normodivergent Patients With Impacted Maxillary Canines: A Case‐Control Study
Introduction: The morphologic characteristics associated with maxillary canine impaction have been extensively investigated at the maxillary level, whereas the contribution of mandibular arch morphology remains less explored. The purpose of this study was to evaluate mandibular arch form in patients with impacted maxillary canines. Methods: The present study included 96 normodivergent Class I subjects aged 10–12 years, divided into three groups: patients with buccally impacted maxillary canines ( n = 32), patients with palatally impacted maxillary canines ( n = 32), and a control group with physiologic canine eruption ( n = 32). Mandibular arch morphology was assessed using an angular morphometric analysis performed on digitally acquired mandibular models. A reference polygon was defined using the cusp tips of the mandibular canines and the distobuccal cusps of the mandibular first molars, and the sums of its anterior and posterior angles were calculated. Cephalometric variables were used to control for sagittal and vertical skeletal relationships. Multivariate and univariate statistical analyses were performed to evaluate intergroup differences. Results: Multivariate analysis of variance (MANOVA) revealed a significant overall effect of group membership on mandibular morphologic variables ( p < 0.001). ArGoMe values were 123.35 ± 7.67 in the palatal impaction group, 128.59 ± 8.83 in the buccal impaction group, and 127.47 ± 6.77 in the control group; anterior angle sums were 133.41 ± 6.97, 123.68 ± 11.17, and 135.07 ± 6.65, respectively; posterior angle sums were 217.47 ± 8.24, 226.07 ± 7.32, and 225.25 ± 6.95, respectively. Significant intergroup differences were found for ArGoMe ( p = 0.013; partial η 2 = 0.090), anterior angle sum ( p < 0.001; partial η 2 = 0.264), and posterior angle sum ( p < 0.001; partial η 2 = 0.223), whereas no significant differences were observed for SNGoMe ( p = 0.571; partial η 2 = 0.012). Post hoc analyses showed that the palatal impaction group had significantly lower ArGoMe values than the buccal impaction group ( p = 0.014), and significantly lower posterior angle sums than both the buccal impaction and control groups (both p < 0.001). The buccal impaction group showed significantly lower anterior angle sums than both the palatal impaction and control groups (both p < 0.001). Conclusions: Mandibular arch morphology differs between patients with impacted maxillary canines and subjects with physiologic eruption. Within the selected normodivergent sample, these differences were observed without significant intergroup differences in vertical divergence. Distinct mandibular morphologic characteristics were associated with palatal and buccal canine impaction, suggesting that mandibular arch assessment may complement conventional diagnostic evaluation in patients with impacted maxillary canines.
- 1 January 2026
- Published by Wiley in International Journal of Dentistry
- Vol. 2026 (1)
Open AccessMandibular Arch Morphology in Normodivergent Patients With Impacted Maxillary Canines: A Case‐Control Study
Introduction: The morphologic characteristics associated with maxillary canine impaction have been extensively investigated at the maxillary level, whereas the contribution of mandibular arch morphology remains less explored. The purpose of this study was to evaluate mandibular arch form in patients with impacted maxillary canines. Methods: The present study included 96 normodivergent Class I subjects aged 10–12 years, divided into three groups: patients with buccally impacted maxillary canines ( n = 32), patients with palatally impacted maxillary canines ( n = 32), and a control group with physiologic canine eruption ( n = 32). Mandibular arch morphology was assessed using an angular morphometric analysis performed on digitally acquired mandibular models. A reference polygon was defined using the cusp tips of the mandibular canines and the distobuccal cusps of the mandibular first molars, and the sums of its anterior and posterior angles were calculated. Cephalometric variables were used to control for sagittal and vertical skeletal relationships. Multivariate and univariate statistical analyses were performed to evaluate intergroup differences. Results: Multivariate analysis of variance (MANOVA) revealed a significant overall effect of group membership on mandibular morphologic variables ( p < 0.001). ArGoMe values were 123.35 ± 7.67 in the palatal impaction group, 128.59 ± 8.83 in the buccal impaction group, and 127.47 ± 6.77 in the control group; anterior angle sums were 133.41 ± 6.97, 123.68 ± 11.17, and 135.07 ± 6.65, respectively; posterior angle sums were 217.47 ± 8.24, 226.07 ± 7.32, and 225.25 ± 6.95, respectively. Significant intergroup differences were found for ArGoMe ( p = 0.013; partial η 2 = 0.090), anterior angle sum ( p < 0.001; partial η 2 = 0.264), and posterior angle sum ( p < 0.001; partial η 2 = 0.223), whereas no significant differences were observed for SNGoMe ( p = 0.571; partial η 2 = 0.012). Post hoc analyses showed that the palatal impaction group had significantly lower ArGoMe values than the buccal impaction group ( p = 0.014), and significantly lower posterior angle sums than both the buccal impaction and control groups (both p < 0.001). The buccal impaction group showed significantly lower anterior angle sums than both the palatal impaction and control groups (both p < 0.001). Conclusions: Mandibular arch morphology differs between patients with impacted maxillary canines and subjects with physiologic eruption. Within the selected normodivergent sample, these differences were observed without significant intergroup differences in vertical divergence. Distinct mandibular morphologic characteristics were associated with palatal and buccal canine impaction, suggesting that mandibular arch assessment may complement conventional diagnostic evaluation in patients with impacted maxillary canines.