Moorak Son
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Moorak Son has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Solomon Adedokun
University of Lagos
7 shared publications Jinhyun Seong
Department of Civil Engineering, Daegu University 2 , Daegudaero 201, Jillyang, Gyeongsan, Gyeongbuk, 712-714
2 shared publicationsSolomon Adedokun
Dept. of Civil Engineering, Daegu University, Gyeongsan, Korea
2 shared publicationsB. Ghahreman
Professor Emeritus, University of Illinois at Urbana Champaign, P O Box 125, Savoy, IL 61874
1 shared publication- Debra F. Laefer
Department of Civil and Urban Engineering, Tandon School of Engineering, New York University, Brooklyn, NY 11201, USA
1 shared publication E. J. Cording
Professor Emeritus, University of Illinois at Urbana Champaign, P O Box 125, Savoy, IL 61874
1 shared publication
Latest Publications
- 15 July 2025
- Published by ASTM International in Journal of Testing and Evaluation
- Vol. 54 (1) , 178-190
Nondestructive Evaluation of Concrete Compressive Strength through the Use of Impact Force Response Signal and Its Application to Field Model Structures
After publication, the authors requested the removal of the Acknowledgments section. The updated paper was posted online on June 15, 2026. The authors apologize for the error. This study investigates a novel nondestructive testing (NDT) method for evaluating the compressive strength of concrete by analyzing impact force response signals. The objective of this research is to determine whether a parameter derived from these signals—total impact force signal energy (TIFSE)—can serve as a reliable and quantifiable indicator of uniaxial compressive strength. Motivated by the limitations of existing NDT methods, such as the rebound hardness test and the ultrasonic pulse velocity test, this study introduces TIFSE, which is defined as the time integral of the squared impact force measured during both the initial and subsequent rebound impacts. This formulation reflects the energy attenuation behavior of the material, which is inherently linked to its mechanical strength. To validate this approach, experiments were conducted on concrete specimens with different sizes and mix designs, as well as six on-site field model structures. The results demonstrated a strong, direct, and consistent correlation between TIFSE and measured compressive strength across all conditions tested. These findings indicate that TIFSE provides a reliable, practical, and noninvasive method for assessing concrete compressive strength in both laboratory and field conditions.
- 15 July 2025
- Published by ASTM International in Journal of Testing and Evaluation
- Vol. 54 (1) , 178-190
Nondestructive Evaluation of Concrete Compressive Strength through the Use of Impact Force Response Signal and Its Application to Field Model Structures
After publication, the authors requested the removal of the Acknowledgments section. The updated paper was posted online on June 15, 2026. The authors apologize for the error. This study investigates a novel nondestructive testing (NDT) method for evaluating the compressive strength of concrete by analyzing impact force response signals. The objective of this research is to determine whether a parameter derived from these signals—total impact force signal energy (TIFSE)—can serve as a reliable and quantifiable indicator of uniaxial compressive strength. Motivated by the limitations of existing NDT methods, such as the rebound hardness test and the ultrasonic pulse velocity test, this study introduces TIFSE, which is defined as the time integral of the squared impact force measured during both the initial and subsequent rebound impacts. This formulation reflects the energy attenuation behavior of the material, which is inherently linked to its mechanical strength. To validate this approach, experiments were conducted on concrete specimens with different sizes and mix designs, as well as six on-site field model structures. The results demonstrated a strong, direct, and consistent correlation between TIFSE and measured compressive strength across all conditions tested. These findings indicate that TIFSE provides a reliable, practical, and noninvasive method for assessing concrete compressive strength in both laboratory and field conditions.
- Open Access
- 17 February 2024
- Published by Elsevier in KSCE Journal of Civil Engineering
- Vol. 28 (6) , 2279-2285
Application of Impact Force Response Signal to Non-destructive Evaluation of Concrete Compressive Strength in Field Structures
- 17 February 2024
- Published by Elsevier in KSCE Journal of Civil Engineering
- Vol. 28 (6) , 2279-2285
Open AccessApplication of Impact Force Response Signal to Non-destructive Evaluation of Concrete Compressive Strength in Field Structures
- 5 April 2023
- Published by ASTM International in Journal of Testing and Evaluation
- Vol. 51 (5) , 3014-3022
Estimation of Nondestructive Compressive Strength of Concrete Using Impact Force Response Signal
This study examined the potential of the impact force response signal induced by impacting an object to estimate the compressive strength of concrete nondestructively. For this study, an automatic impacting device was devised, a system was set up to measure impact force signal, and a program was developed to analyze the obtained signal and estimate the compressive strength. Concrete test specimens were manufactured and tested. Impacts were carried out on the specimens, and the impact force signals were obtained. The signals were analyzed to obtain the total impact force signal energy, and a uniaxial compressive strength test was carried out on each specimen to measure the compressive strength directly. A good relationship was formed between the total impact force signal energy and the uniaxial compressive strength. The strength was estimated from the obtained relationship for new test specimens and compared with the directly measured strength. The comparison indicated that the estimated strength and the measured strength had a close relationship. In addition, a Schmidt hammer test was carried out on the new specimens before the uniaxial compressive test, and the test results were compared with those from the impact force signal energy. The strength estimation using the impact force signal energy had a better result. The study results show that the compressive strength of concrete materials could be estimated nondestructively using the proposed method.
- 5 April 2023
- Published by ASTM International in Journal of Testing and Evaluation
- Vol. 51 (5) , 3014-3022
Estimation of Nondestructive Compressive Strength of Concrete Using Impact Force Response Signal
This study examined the potential of the impact force response signal induced by impacting an object to estimate the compressive strength of concrete nondestructively. For this study, an automatic impacting device was devised, a system was set up to measure impact force signal, and a program was developed to analyze the obtained signal and estimate the compressive strength. Concrete test specimens were manufactured and tested. Impacts were carried out on the specimens, and the impact force signals were obtained. The signals were analyzed to obtain the total impact force signal energy, and a uniaxial compressive strength test was carried out on each specimen to measure the compressive strength directly. A good relationship was formed between the total impact force signal energy and the uniaxial compressive strength. The strength was estimated from the obtained relationship for new test specimens and compared with the directly measured strength. The comparison indicated that the estimated strength and the measured strength had a close relationship. In addition, a Schmidt hammer test was carried out on the new specimens before the uniaxial compressive test, and the test results were compared with those from the impact force signal energy. The strength estimation using the impact force signal energy had a better result. The study results show that the compressive strength of concrete materials could be estimated nondestructively using the proposed method.
- Open Access
- 15 November 2022
- Published by Elsevier in KSCE Journal of Civil Engineering
- Vol. 26 (12) , 5417
Erratum to: Effect of Torsion on the Structural Response to Ground Movements
- 15 November 2022
- Published by Elsevier in KSCE Journal of Civil Engineering
- Vol. 26 (12) , 5417
Open AccessErratum to: Effect of Torsion on the Structural Response to Ground Movements
- Open Access
- 27 August 2022
- Published by Elsevier in KSCE Journal of Civil Engineering
- Vol. 26 (10) , 4214-4221
Effect of Torsion on the Structural Response to Ground Movements
- 27 August 2022
- Published by Elsevier in KSCE Journal of Civil Engineering
- Vol. 26 (10) , 4214-4221
Open AccessEffect of Torsion on the Structural Response to Ground Movements
- Open Access
- 24 August 2020
- Published by Elsevier in KSCE Journal of Civil Engineering
- Vol. 24 (10) , 2931-2938
Shear Strength of Rock Joints and Its Estimation
- 24 August 2020
- Published by Elsevier in KSCE Journal of Civil Engineering
- Vol. 24 (10) , 2931-2938
Open AccessShear Strength of Rock Joints and Its Estimation
- Open Access
- 10 August 2020
- Published by Elsevier in KSCE Journal of Civil Engineering
- Vol. 24 (10) , 2890-2899
Earth Pressure on an Excavation Wall in Rock Mass
- 10 August 2020
- Published by Elsevier in KSCE Journal of Civil Engineering
- Vol. 24 (10) , 2890-2899
Open AccessEarth Pressure on an Excavation Wall in Rock Mass
- Open Access
- 12 November 2019
- Published by Elsevier in KSCE Journal of Civil Engineering
- Vol. 23 (12) , 5076-5089
Earth Pressure Envelope for Retaining Wall in Jointed Rock Ground
- 12 November 2019
- Published by Elsevier in KSCE Journal of Civil Engineering
- Vol. 23 (12) , 5076-5089
Open AccessEarth Pressure Envelope for Retaining Wall in Jointed Rock Ground
- 6 June 2018
- Published by ASTM International in Journal of Testing and Evaluation
- Vol. 47 (1) , 87-103
Development and Validation of an NDT Based on Total Sound Signal Energy
This study proposes a new nondestructive testing (NDT) method for assessing the compressive strength of various materials. The method is based on the total sound signal energy, which is determined using the sound signal generated from impacting an object. A device was devised to generate an impact sound with a test object using a rotating, freefalling impact ball and subsequent repetitive impacts from the rebound action. First, to validate the method, soil cement, cement paste, pine wood, shale, and granite specimens were tested to examine the correlation between the direct compressive strength and the total sound signal energy. Next, the method was applied to a number of concrete test specimens with various sizes and strengths. The test results of the concrete specimens showed a direct relationship between the direct compressive strength and the total sound signal energy, which was dependent on the size of the specimen. Correlation equations between the total sound signal energy and the direct compressive strength were determined for different specimen sizes through regression analysis. The equations were then used to estimate the concrete compressive strength and validate the method. Statistical analysis indicated that the estimated compressive strength determined by the total sound signal energy quite reliably agreed with the directly measured compressive strength, regardless of the specimen size. It is expected that the new NDT method will play a meaningful role in nondestructively estimating the compressive strength of various materials in the future, including concrete.
- 6 June 2018
- Published by ASTM International in Journal of Testing and Evaluation
- Vol. 47 (1) , 87-103
Development and Validation of an NDT Based on Total Sound Signal Energy
This study proposes a new nondestructive testing (NDT) method for assessing the compressive strength of various materials. The method is based on the total sound signal energy, which is determined using the sound signal generated from impacting an object. A device was devised to generate an impact sound with a test object using a rotating, freefalling impact ball and subsequent repetitive impacts from the rebound action. First, to validate the method, soil cement, cement paste, pine wood, shale, and granite specimens were tested to examine the correlation between the direct compressive strength and the total sound signal energy. Next, the method was applied to a number of concrete test specimens with various sizes and strengths. The test results of the concrete specimens showed a direct relationship between the direct compressive strength and the total sound signal energy, which was dependent on the size of the specimen. Correlation equations between the total sound signal energy and the direct compressive strength were determined for different specimen sizes through regression analysis. The equations were then used to estimate the concrete compressive strength and validate the method. Statistical analysis indicated that the estimated compressive strength determined by the total sound signal energy quite reliably agreed with the directly measured compressive strength, regardless of the specimen size. It is expected that the new NDT method will play a meaningful role in nondestructively estimating the compressive strength of various materials in the future, including concrete.
- 1 July 2017
- Published by American Society of Civil Engineers (ASCE) in International Journal of Geomechanics
- Vol. 17 (7)
Three-Dimensional Expansion of the Terzaghi Arching Formula Considering Inclined Sliding Surfaces and Examination of Its Effects
Terzaghi proposed a two-dimensional (2D) formula for arching based on the assumption of a vertical sliding surface induced in the upper part of soil mass attributable to the downward movement of a trapdoor. This study expands the 2D Terzaghi arching formula to a three-dimensional (3D) formula in which inclined sliding surfaces under general 3D excavation conditions are considered. The effects of the formula under various conditions were investigated. The assumption of the original 2D formula that the maximum shear strength is mobilized on a vertical surface is different from reality, because an actual sliding surface caused by downward movement of a trapdoor is an inclined surface. Furthermore, the 2D Terzaghi formula is limited to conditions of plane strain and does not consider 3D excavation conditions. Therefore, to examine the practical effects of these issues and to consider the arching effect in 3D excavation conditions, a formula was developed to expand the Terzaghi arching formula to incli...
- 1 July 2017
- Published by American Society of Civil Engineers (ASCE) in International Journal of Geomechanics
- Vol. 17 (7)
Three-Dimensional Expansion of the Terzaghi Arching Formula Considering Inclined Sliding Surfaces and Examination of Its Effects
Terzaghi proposed a two-dimensional (2D) formula for arching based on the assumption of a vertical sliding surface induced in the upper part of soil mass attributable to the downward movement of a trapdoor. This study expands the 2D Terzaghi arching formula to a three-dimensional (3D) formula in which inclined sliding surfaces under general 3D excavation conditions are considered. The effects of the formula under various conditions were investigated. The assumption of the original 2D formula that the maximum shear strength is mobilized on a vertical surface is different from reality, because an actual sliding surface caused by downward movement of a trapdoor is an inclined surface. Furthermore, the 2D Terzaghi formula is limited to conditions of plane strain and does not consider 3D excavation conditions. Therefore, to examine the practical effects of these issues and to consider the arching effect in 3D excavation conditions, a formula was developed to expand the Terzaghi arching formula to incli...