Xiaowei Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xiaowei Li has a total of 96 co-authors. Here are the top co-authors by number of shared publications:
Guo-Chen Dong
State Key Laboratory of Geological Processes and Mineral Resources, School of Earth Science and Resources & Research Center of Genetic Mineralogy, China University of Geosciences, Beijing 100083, China
4 shared publicationsFang-Yue Wang
Ore Deposit and Exploration Centre, Hefei University of Technology, and School of Resources and Environmental Engineering, Hefei University of Technology, Hefei, 230009, China
2 shared publications- Guochen Dong
School of Earth Science and Resources, China University of Geosciences, Beijing 100083, China
2 shared publications - Joshua J. Schwartz
Department of Geological Sciences, California State University Northridge, Northridge, California 91330, U.S.A.
2 shared publications SUN YuQin
2 shared publicationsWANG FangYue
2 shared publications
Latest Publications
- Open Access
- 17 November 2026
- Published by MDPI AG in Preprints.org
Quantitative Characterization of Peripheral Soil Geochemical Zoning in a Porphyry Mineral System and Implications for Mineral Exploration: A Case Study of Ganlongla on the Northern Margin of the Giant Yulong Copper Deposit, Tibet
The peripheries of porphyry mineral systems offer important opportunities for exploration at depth and in adjacent areas. Conventional soil geochemical interpretation, however, relies largely on single-element concentration classes and provides limited constraints on whether an anomaly represents a proximal, high-temperature core or a distal frontal halo. This study examines analytical data for 16 elements from 1,325 surface-soil samples collected in the Ganlongla area, north of the giant Yulong porphyry-skarn Cu (Mo, Au) deposit in Tibet. Element background concentrations and anomaly thresholds were estimated using an iterative lognormal procedure, and element associations were identified using correlation analysis, R-mode cluster analysis, and orthogonally rotated factor analysis. Drawing on the concept of primary-halo zoning in hydrothermal deposits, four composite log-contrast indices were developed for the inner zone (Cu-Mo-W-Bi), contact zone (Cu-Au-Ag), peripheral zone (Pb-Zn-Ag-As-Sb-Hg), and skarn association (W-Bi). A zoning index, ZI, defined as the peripheral-zone index minus the inner-zone index, was then used to quantify the position of each sampling site relative to the mineralization center. Density-based spatial clustering of applications with noise (DBSCAN) was subsequently used to delineate anomaly clusters and rank exploration targets. The high-temperature and skarn associations show their highest contrast values in the south and decline systematically northward, whereas ZI increases monotonically from south to north, from 0.143 to 0.293, with a slope of approximately 9.73 × 10⁻⁵ m⁻¹. These patterns are consistent with the main Yulong orebody lying south of the survey area and Ganlongla occupying its northern outer contact zone and periphery. Three Class A, two Class B, and two Class C targets were delineated, together with an isolated, exceptionally strong anomaly requiring field verification. This composite contrast-index and zoning-index approach provides a reproducible quantitative basis for advancing peripheral soil geochemical exploration in covered porphyry mineral systems from anomaly detection toward assessment of relative position and depth within the system.
- 17 November 2026
- Published by MDPI AG in Preprints.org
Open AccessQuantitative Characterization of Peripheral Soil Geochemical Zoning in a Porphyry Mineral System and Implications for Mineral Exploration: A Case Study of Ganlongla on the Northern Margin of the Giant Yulong Copper Deposit, Tibet
The peripheries of porphyry mineral systems offer important opportunities for exploration at depth and in adjacent areas. Conventional soil geochemical interpretation, however, relies largely on single-element concentration classes and provides limited constraints on whether an anomaly represents a proximal, high-temperature core or a distal frontal halo. This study examines analytical data for 16 elements from 1,325 surface-soil samples collected in the Ganlongla area, north of the giant Yulong porphyry-skarn Cu (Mo, Au) deposit in Tibet. Element background concentrations and anomaly thresholds were estimated using an iterative lognormal procedure, and element associations were identified using correlation analysis, R-mode cluster analysis, and orthogonally rotated factor analysis. Drawing on the concept of primary-halo zoning in hydrothermal deposits, four composite log-contrast indices were developed for the inner zone (Cu-Mo-W-Bi), contact zone (Cu-Au-Ag), peripheral zone (Pb-Zn-Ag-As-Sb-Hg), and skarn association (W-Bi). A zoning index, ZI, defined as the peripheral-zone index minus the inner-zone index, was then used to quantify the position of each sampling site relative to the mineralization center. Density-based spatial clustering of applications with noise (DBSCAN) was subsequently used to delineate anomaly clusters and rank exploration targets. The high-temperature and skarn associations show their highest contrast values in the south and decline systematically northward, whereas ZI increases monotonically from south to north, from 0.143 to 0.293, with a slope of approximately 9.73 × 10⁻⁵ m⁻¹. These patterns are consistent with the main Yulong orebody lying south of the survey area and Ganlongla occupying its northern outer contact zone and periphery. Three Class A, two Class B, and two Class C targets were delineated, together with an isolated, exceptionally strong anomaly requiring field verification. This composite contrast-index and zoning-index approach provides a reproducible quantitative basis for advancing peripheral soil geochemical exploration in covered porphyry mineral systems from anomaly detection toward assessment of relative position and depth within the system.
- 22 September 2025
- Published by Geological Society of America in Geological Society of America Bulletin
- Vol. 138 (3-4) , 993-1010
Rare metal enrichment during magmatic-hydrothermal evolution in lithium-cesium-tantalum pegmatite: Evidence from in situ elemental and boron-isotopic variations in micas from the Shaliuquan pegmatite along the northern margin of the Qaidam Basin, China
Lithium-cesium-tantalum (LCT) pegmatites are a type of peraluminous pegmatites enriched in a variety of rare metal elements, such as Li, Be, Rb, Cs, Nb, Ta, Sn, and W, and they are generally considered to evolve from parental S-type granites through extreme fractionation. The mechanism underlying the enrichment of these rare metals in S-type granites and LCT pegmatites is not yet fully understood. We conducted a comprehensive textural, in situ elemental, and in situ boron (B)-isotopic analysis of primary and secondary muscovite from the Shaliuquan pegmatite in the Quanji Massif, located at the northern edge of the Qaidam Basin, China. The internally zoned pegmatite comprises four main distinct textural and lithological zones from border to core: a medium-grained muscovite-tourmaline (MT) zone, a muscovite-microcline (MM) zone, a quartz-muscovite (QM) zone, and a Li-muscovite (LM) zone. The increasing concentration of rare metal (Li, Rb, Cs, Nb, and Ta) and fluxing (Li, F, and B) elements—along with decreasing K/Cs ratios—in primary muscovite from the MT zone to the LM zone suggests that fractional crystallization played an important role in producing compositional variations during the magmatic stage. Modeling of elemental ratios (e.g., K/Rb and K/Cs) suggests that Rayleigh fractionation continued during this stage. However, the B-isotopic composition of primary muscovite decreases at the transition from the QM to LM zones, deviating from the expected Rayleigh fractionation trend. This suggests that the crystallization environment transitioned from a silicic, fluid-undersaturated melt to a fluid-saturated melt. Additionally, textural and chemical differences between primary and secondary muscovite indicate that fluid-crystal interactions were active throughout the magmatic-hydrothermal evolution. Specifically, secondary muscovite in the MM, QM, and LM zones exhibits lower concentrations of Rb, Nb, and Ta compared to its primary counterpart, suggesting its crystallization from a fluid-dominated system through fluid-crystal interactions. This study highlights that Li enrichment in LCT pegmatite systems can be explained by a combination of extreme fractional crystallization and fluid-crystal interactions. However, the depletion of Li in secondary muscovite from the LM zone, relative to primary muscovite, suggests that fluid-crystal interaction contributes not to Li enrichment, but rather to its redistribution.
- 22 September 2025
- Published by Geological Society of America in Geological Society of America Bulletin
- Vol. 138 (3-4) , 993-1010
Rare metal enrichment during magmatic-hydrothermal evolution in lithium-cesium-tantalum pegmatite: Evidence from in situ elemental and boron-isotopic variations in micas from the Shaliuquan pegmatite along the northern margin of the Qaidam Basin, China
Lithium-cesium-tantalum (LCT) pegmatites are a type of peraluminous pegmatites enriched in a variety of rare metal elements, such as Li, Be, Rb, Cs, Nb, Ta, Sn, and W, and they are generally considered to evolve from parental S-type granites through extreme fractionation. The mechanism underlying the enrichment of these rare metals in S-type granites and LCT pegmatites is not yet fully understood. We conducted a comprehensive textural, in situ elemental, and in situ boron (B)-isotopic analysis of primary and secondary muscovite from the Shaliuquan pegmatite in the Quanji Massif, located at the northern edge of the Qaidam Basin, China. The internally zoned pegmatite comprises four main distinct textural and lithological zones from border to core: a medium-grained muscovite-tourmaline (MT) zone, a muscovite-microcline (MM) zone, a quartz-muscovite (QM) zone, and a Li-muscovite (LM) zone. The increasing concentration of rare metal (Li, Rb, Cs, Nb, and Ta) and fluxing (Li, F, and B) elements—along with decreasing K/Cs ratios—in primary muscovite from the MT zone to the LM zone suggests that fractional crystallization played an important role in producing compositional variations during the magmatic stage. Modeling of elemental ratios (e.g., K/Rb and K/Cs) suggests that Rayleigh fractionation continued during this stage. However, the B-isotopic composition of primary muscovite decreases at the transition from the QM to LM zones, deviating from the expected Rayleigh fractionation trend. This suggests that the crystallization environment transitioned from a silicic, fluid-undersaturated melt to a fluid-saturated melt. Additionally, textural and chemical differences between primary and secondary muscovite indicate that fluid-crystal interactions were active throughout the magmatic-hydrothermal evolution. Specifically, secondary muscovite in the MM, QM, and LM zones exhibits lower concentrations of Rb, Nb, and Ta compared to its primary counterpart, suggesting its crystallization from a fluid-dominated system through fluid-crystal interactions. This study highlights that Li enrichment in LCT pegmatite systems can be explained by a combination of extreme fractional crystallization and fluid-crystal interactions. However, the depletion of Li in secondary muscovite from the LM zone, relative to primary muscovite, suggests that fluid-crystal interaction contributes not to Li enrichment, but rather to its redistribution.
- 1 May 2025
- Published by Mineralogical Society of America in American Mineralogist: Journal of Earth and Planetary Materials
- Vol. 110 (5) , 665-673
Atomic-scale visualization and quantification of lithium in lepidolite by AC-TEM-EELS: Implications for pegmatite genesis and advancing lithium extraction techniques
The small ionic radius of lithium ions (Li+ = 0.6 Å) poses a significant challenge in visualizing and quantifying their presence within the lepidolite lattice. Nevertheless, the use of spherical aberration-corrected transmission electron microscopy (AC-TEM) in conjunction with electron energy loss spectroscopy (EELS) offers an innovative approach to surmount this challenge. In this investigation, we conducted a comprehensive analysis of lepidolite samples obtained from lithium-rich pegmatites in the Shaliuquan region of the Quanji Massif, situated at the northwestern periphery of the Qinghai-Tibetan Plateau in northwest China. Utilizing AC-TEM in tandem with EELS, we captured sub-angstrom images revealing the presence and spatial distribution of lithium atoms within the lepidolite lattice. Additionally, we quantified their concentrations and determined the formula for lithium-rich mica. This study solves a long-standing problem regarding the accurate determination of lithium concentration and showcases the viability of AC-TEM-EELS for both visualizing and quantifying lithium within the lepidolite lattice. Our finding facilitates the differentiation of cation ordering, polytypes, and lepidolite’s chemical compositions, which is helpful for advancing lithium extraction techniques and constraining the forming process of pegmatites.
- 1 May 2025
- Published by Mineralogical Society of America in American Mineralogist: Journal of Earth and Planetary Materials
- Vol. 110 (5) , 665-673
Atomic-scale visualization and quantification of lithium in lepidolite by AC-TEM-EELS: Implications for pegmatite genesis and advancing lithium extraction techniques
The small ionic radius of lithium ions (Li+ = 0.6 Å) poses a significant challenge in visualizing and quantifying their presence within the lepidolite lattice. Nevertheless, the use of spherical aberration-corrected transmission electron microscopy (AC-TEM) in conjunction with electron energy loss spectroscopy (EELS) offers an innovative approach to surmount this challenge. In this investigation, we conducted a comprehensive analysis of lepidolite samples obtained from lithium-rich pegmatites in the Shaliuquan region of the Quanji Massif, situated at the northwestern periphery of the Qinghai-Tibetan Plateau in northwest China. Utilizing AC-TEM in tandem with EELS, we captured sub-angstrom images revealing the presence and spatial distribution of lithium atoms within the lepidolite lattice. Additionally, we quantified their concentrations and determined the formula for lithium-rich mica. This study solves a long-standing problem regarding the accurate determination of lithium concentration and showcases the viability of AC-TEM-EELS for both visualizing and quantifying lithium within the lepidolite lattice. Our finding facilitates the differentiation of cation ordering, polytypes, and lepidolite’s chemical compositions, which is helpful for advancing lithium extraction techniques and constraining the forming process of pegmatites.
- Open Access
Process and Mechanism of Exhumation in the Southern Altai Mountains, Northwest China
This study presents new fission track data from 40 apatite and 40 zircon samples in the Southern Altai Mountains (SAMs), revealing apatite fission track (AFT) ages of 110 ± 8 Ma to 54 ± 4 Ma and zircon fission track (ZFT) ages of 234 ± 24 Ma to 86 ± 7 Ma. The exhumation rates derived from three thermochronological methods range from 0.01 to 0.1 km/Ma (Age-Elevation method), 0.01 to 0.14 km/Ma (Half-Space thermal model), and 0.027 to 0.075 km/Ma (Age2exhume model). Thermal history modeling using HeFTy software reveals similar thermal histories on both sides of the Kangbutiebao Fault, with a notable cooling event and higher exhumation rates to the northeast. The Late Cretaceous (100–75 Ma) rapid cooling is associated with tectonic reactivation, likely linked to the collapse of the Mongol–Okhotsk Orogen and slab rollback in the southern Tethys Ocean. In the Late Cenozoic (10–0 Ma), cooling and uplift reflect the influence of tectonic stresses from the India–Eurasia collision, which also drove the reactivation of the Kangbutiebao Fault. These findings suggest a complex interplay of tectonic processes driving exhumation in the SAMs from the Late Jurassic to the Early Paleogene.
Open AccessProcess and Mechanism of Exhumation in the Southern Altai Mountains, Northwest China
This study presents new fission track data from 40 apatite and 40 zircon samples in the Southern Altai Mountains (SAMs), revealing apatite fission track (AFT) ages of 110 ± 8 Ma to 54 ± 4 Ma and zircon fission track (ZFT) ages of 234 ± 24 Ma to 86 ± 7 Ma. The exhumation rates derived from three thermochronological methods range from 0.01 to 0.1 km/Ma (Age-Elevation method), 0.01 to 0.14 km/Ma (Half-Space thermal model), and 0.027 to 0.075 km/Ma (Age2exhume model). Thermal history modeling using HeFTy software reveals similar thermal histories on both sides of the Kangbutiebao Fault, with a notable cooling event and higher exhumation rates to the northeast. The Late Cretaceous (100–75 Ma) rapid cooling is associated with tectonic reactivation, likely linked to the collapse of the Mongol–Okhotsk Orogen and slab rollback in the southern Tethys Ocean. In the Late Cenozoic (10–0 Ma), cooling and uplift reflect the influence of tectonic stresses from the India–Eurasia collision, which also drove the reactivation of the Kangbutiebao Fault. These findings suggest a complex interplay of tectonic processes driving exhumation in the SAMs from the Late Jurassic to the Early Paleogene.
- 4 October 2024
- Published by Elsevier in Gondwana Research
- Vol. 137, 171-208
Carboniferous–Triassic subduction in the Qinling orogen
- 4 October 2024
- Published by Elsevier in Gondwana Research
- Vol. 137, 171-208
Carboniferous–Triassic subduction in the Qinling orogen
- 1 April 2024
- Published by Mineralogical Society of America in American Mineralogist: Journal of Earth and Planetary Materials
- Vol. 109 (4) , 709-728
Revisiting the genesis of the adakite-like granitoids in collisional zones: Water-fluxed melting of intermediate to felsic rocks with dilution by low Sr/Y phases
High-Sr/Y granitoids in continental settings are sometimes erroneously regarded as the products derived from partial melting of thickened/delaminated mafic lower curst under relatively higher pressures (>1.5 GPa) in a collisional orogenic setting. In fact, multiple magmatic processes in the trans-crustal magma system, such as recycling of antecrysts, crustal assimilation, and fractional crystallization, can create or modify the primary “adakitic” signature. As a result, the generation of adakitic magmas in continental settings remains controversial from a bulk-rock perspective. Here, we address the origin of adakitic plutonic rocks through geochemical and textural characterization of rock-forming minerals in the pyroxene-bearing Zhuyuan granodiorite, West Qinling, China. The Zhuyuan granodiorite formed in a post-collisional setting and primarily consists of resorbed orthopyroxene, three types of clinopyroxene, amphibole, two types of plagioclases, K-feldspar, biotite, and quartz. Type-1 Cpx has high XMg (70.0–81.7). Type-2 Cpx displays normal zoning and decreasing XMg (80.9 to 71.5) from the core to rim. Type-3 Cpx is reversely zoned, where the rims have higher XMg (75.5–86.9), Ni, Cr, suggesting a recharge event. Orthopyroxene has high-Ni and -Cr contents, as well as high XMg (80.9–82.8), indicative of antecrysts that grew in mafic magma reservoirs. The injection of magmas from different sources is supported by sieve-textured plagioclase and crystal size distributions of non-poikilitic amphibole. Finally, non-sieve textured plagioclase, biotite, K-feldspar, and quartz are late-crystallized phases, indicative of an orthocrystic origin. The melts in equilibrium with these orthocrysts display significantly higher Sr/Y values than the magma batches that crystallized other mafic phases (i.e., amphibole, clinopyroxene, and orthopyroxene). Thus, we propose that the system involved an initial high-Sr/Y melts in equilibrium with the orthocryst assemblage was generated by water-fluxed melting of intermediate to felsic sources. The addition of low Sr/Y non-orthocrysts (e.g., amphibole and pyroxene) and associated melt diluted the original “adakitic signal” in the magma reservoir and drove the bulk composition to more mafic values. Consequently, the Zhuyuan pyroxene-bearing granodiorite represents a mixture of crystals with diverse origins and distinct magma batches of various compositions (from felsic to mafic compositions). Our study emphasizes that the origin of adakitic granitoids cannot be clearly deciphered without geochemical analysis of the constituent minerals. We also suggest that Sr/Y values in plutons should be cautiously used in paleo-crustal thickness estimates in collisional settings because of possible open system scenarios as described here.
- 1 April 2024
- Published by Mineralogical Society of America in American Mineralogist: Journal of Earth and Planetary Materials
- Vol. 109 (4) , 709-728
Revisiting the genesis of the adakite-like granitoids in collisional zones: Water-fluxed melting of intermediate to felsic rocks with dilution by low Sr/Y phases
High-Sr/Y granitoids in continental settings are sometimes erroneously regarded as the products derived from partial melting of thickened/delaminated mafic lower curst under relatively higher pressures (>1.5 GPa) in a collisional orogenic setting. In fact, multiple magmatic processes in the trans-crustal magma system, such as recycling of antecrysts, crustal assimilation, and fractional crystallization, can create or modify the primary “adakitic” signature. As a result, the generation of adakitic magmas in continental settings remains controversial from a bulk-rock perspective. Here, we address the origin of adakitic plutonic rocks through geochemical and textural characterization of rock-forming minerals in the pyroxene-bearing Zhuyuan granodiorite, West Qinling, China. The Zhuyuan granodiorite formed in a post-collisional setting and primarily consists of resorbed orthopyroxene, three types of clinopyroxene, amphibole, two types of plagioclases, K-feldspar, biotite, and quartz. Type-1 Cpx has high XMg (70.0–81.7). Type-2 Cpx displays normal zoning and decreasing XMg (80.9 to 71.5) from the core to rim. Type-3 Cpx is reversely zoned, where the rims have higher XMg (75.5–86.9), Ni, Cr, suggesting a recharge event. Orthopyroxene has high-Ni and -Cr contents, as well as high XMg (80.9–82.8), indicative of antecrysts that grew in mafic magma reservoirs. The injection of magmas from different sources is supported by sieve-textured plagioclase and crystal size distributions of non-poikilitic amphibole. Finally, non-sieve textured plagioclase, biotite, K-feldspar, and quartz are late-crystallized phases, indicative of an orthocrystic origin. The melts in equilibrium with these orthocrysts display significantly higher Sr/Y values than the magma batches that crystallized other mafic phases (i.e., amphibole, clinopyroxene, and orthopyroxene). Thus, we propose that the system involved an initial high-Sr/Y melts in equilibrium with the orthocryst assemblage was generated by water-fluxed melting of intermediate to felsic sources. The addition of low Sr/Y non-orthocrysts (e.g., amphibole and pyroxene) and associated melt diluted the original “adakitic signal” in the magma reservoir and drove the bulk composition to more mafic values. Consequently, the Zhuyuan pyroxene-bearing granodiorite represents a mixture of crystals with diverse origins and distinct magma batches of various compositions (from felsic to mafic compositions). Our study emphasizes that the origin of adakitic granitoids cannot be clearly deciphered without geochemical analysis of the constituent minerals. We also suggest that Sr/Y values in plutons should be cautiously used in paleo-crustal thickness estimates in collisional settings because of possible open system scenarios as described here.
- 1 March 2024
- Published by Mineralogical Society of America in American Mineralogist: Journal of Earth and Planetary Materials
- Vol. 109 (3) , 540-555
Multiple magmatic processes revealed by distinct clinopyroxene populations in the magma plumbing system: A case study from a Miocene volcano in West Qinling, Central China
The application of whole-rock compositions to trace magma evolution or crystal-melt equilibrium may be called into question when foreign crystals are incorporated into host magmas. To address this challenge, establishing the origins (orthocrysts, antecrysts, xenocrysts, etc.) of minerals with variable textures in magmatic plumbing systems is necessary. In this paper, we describe complex oscillatory zoning patterns of clinopyroxenes (Cpx) from the Miocene Majuangou (MJG) alkali basalts from West Qinling, China. Our detailed petrographic, mineralogical, and geochemical analyses unravel the origins of various Cpx crystals with distinct textural patterns, thereby providing information about magma storage, recharging and/or mixing, and transportation, as well as the reactions between crystals and melts/fluids. Based on textural patterns, Cpx may be divided into four types: normal (Type-1 Cpx), simple oscillatory (Type-2 Cpx), complex oscillatory (Type-3 Cpx), and grains that lack zoning (Type-4 Cpx, suggested to be orthocrysts). Through the textural characterization of Cpx, the comparison between different types of Cpx, and the relationships between Cpx major compositions from different lithologies, we concluded that Type-1–3 Cpx cores are antecrysts or xenocrysts with diverse origins: primitive magma (Type-1 Cpx cores), magma mush (Type-2 Cpx cores), and crustal granulite (Type-3 Cpx cores). The zoning patterns and the compositions of these Cpx crystals indicate at least three batches of magmatic activity, i.e., the Batch-1 low-Mg# magma (Mg#: 47.4–53.3), the Batch-2 primitive magma (Mg#: 57.2–64.5), and the Batch-3 low-Mg# host alkali magma (Mg#: 47.2–54.6). Cpx-melt thermobarometry demonstrates that at least two crustal magma reservoirs existed in the magma plumbing system at depths of 30.1 and 40.9 km. The antecrystic/xenocrystic Cpx cores were captured by, continued to grow in, and subsequently reacted with ascending K-rich melt/fluid. The spongy textures in Cpx cores/mantles are attributed to this reaction, which may be expressed as: Melt 1 (primitive or evolved) + K-rich melts/fluids + Cpx (CaMgSi2O6) = K-feldspar (KAlSi3O8) + ilmenite (FeTiO3) + Melt 2 (derivative). The products of this reaction (K-feldspar and ilmenite) filled the sieves in the spongy zones of Type-1–3 Cpx. This detailed investigation of compositional and textural features of Cpx antecrysts/xenocrysts suggests that the interactions between various interconnected magma reservoirs are widespread beneath the magmatic plumbing system. Our study emphasizes the importance of the incorporation of foreign crystals and the Cpx-melt/fluid reaction in magmatic plumbing system, which can significantly modify the whole-rock compositions and lead to the formation of spongy textures without the need for fractures and cracks in minerals.
- 1 March 2024
- Published by Mineralogical Society of America in American Mineralogist: Journal of Earth and Planetary Materials
- Vol. 109 (3) , 540-555
Multiple magmatic processes revealed by distinct clinopyroxene populations in the magma plumbing system: A case study from a Miocene volcano in West Qinling, Central China
The application of whole-rock compositions to trace magma evolution or crystal-melt equilibrium may be called into question when foreign crystals are incorporated into host magmas. To address this challenge, establishing the origins (orthocrysts, antecrysts, xenocrysts, etc.) of minerals with variable textures in magmatic plumbing systems is necessary. In this paper, we describe complex oscillatory zoning patterns of clinopyroxenes (Cpx) from the Miocene Majuangou (MJG) alkali basalts from West Qinling, China. Our detailed petrographic, mineralogical, and geochemical analyses unravel the origins of various Cpx crystals with distinct textural patterns, thereby providing information about magma storage, recharging and/or mixing, and transportation, as well as the reactions between crystals and melts/fluids. Based on textural patterns, Cpx may be divided into four types: normal (Type-1 Cpx), simple oscillatory (Type-2 Cpx), complex oscillatory (Type-3 Cpx), and grains that lack zoning (Type-4 Cpx, suggested to be orthocrysts). Through the textural characterization of Cpx, the comparison between different types of Cpx, and the relationships between Cpx major compositions from different lithologies, we concluded that Type-1–3 Cpx cores are antecrysts or xenocrysts with diverse origins: primitive magma (Type-1 Cpx cores), magma mush (Type-2 Cpx cores), and crustal granulite (Type-3 Cpx cores). The zoning patterns and the compositions of these Cpx crystals indicate at least three batches of magmatic activity, i.e., the Batch-1 low-Mg# magma (Mg#: 47.4–53.3), the Batch-2 primitive magma (Mg#: 57.2–64.5), and the Batch-3 low-Mg# host alkali magma (Mg#: 47.2–54.6). Cpx-melt thermobarometry demonstrates that at least two crustal magma reservoirs existed in the magma plumbing system at depths of 30.1 and 40.9 km. The antecrystic/xenocrystic Cpx cores were captured by, continued to grow in, and subsequently reacted with ascending K-rich melt/fluid. The spongy textures in Cpx cores/mantles are attributed to this reaction, which may be expressed as: Melt 1 (primitive or evolved) + K-rich melts/fluids + Cpx (CaMgSi2O6) = K-feldspar (KAlSi3O8) + ilmenite (FeTiO3) + Melt 2 (derivative). The products of this reaction (K-feldspar and ilmenite) filled the sieves in the spongy zones of Type-1–3 Cpx. This detailed investigation of compositional and textural features of Cpx antecrysts/xenocrysts suggests that the interactions between various interconnected magma reservoirs are widespread beneath the magmatic plumbing system. Our study emphasizes the importance of the incorporation of foreign crystals and the Cpx-melt/fluid reaction in magmatic plumbing system, which can significantly modify the whole-rock compositions and lead to the formation of spongy textures without the need for fractures and cracks in minerals.
- Open Access
- 15 June 2023
- Published by Elsevier in Ore Geology Reviews
- Vol. 159
Geochemistry, U-Pb zircon geochronology, and Fe isotopes of the Shanzhuang banded iron formation in the North China Craton: Implications for genesis and depositional environment
- 15 June 2023
- Published by Elsevier in Ore Geology Reviews
- Vol. 159
Open AccessGeochemistry, U-Pb zircon geochronology, and Fe isotopes of the Shanzhuang banded iron formation in the North China Craton: Implications for genesis and depositional environment
- 1 March 2023
- Published by Mineralogical Society of America in American Mineralogist: Journal of Earth and Planetary Materials
- Vol. 108 (3) , 455-464
Raman shifts ofc-BN as an idealP-Tsensor for studying water-rock interactions in a diamond-anvil cell
Cubic boron nitride (c-BN) has the same structure as diamond, and it shows very inert reaction activity in different chemical environments, even under high-pressure (P) and high-temperature (T) conditions. Furthermore, the P- and T-dependent Raman shift of c-BN (e.g., TO mode) can be distinguished from that of the diamond anvil (c-BN at ~1054 cm–1 vs. diamond at ~1331 cm–1 at ambient conditions), making c-BN a potential P-T sensor for diamond-anvil cell (DAC) experiments. However, the Raman shift of c-BN has not been well studied at high P-T conditions, especially at temperatures above 700 K. In this study, we systematically calibrated the Raman shift of the TO mode (νTO) for synthetic c-BN grains at high-P and high-T conditions up to 15 GPa and 1300 K. Both ruby (Mao et al. 1986) and Sm2+:SrB4O7 (Datchi et al. 2007) were used as internally consistent standards for calibration of c-BN P-T sensor. Our results show that the Raman shift of c-BN is negatively correlated with temperature [∂νTO/∂T = –0.02206(71)] but positively correlated with pressure [∂νTO/∂P = –3.35(2)]. More importantly, we found that the P-T cross derivative for the Raman shift of c-BN [∂2νTO/∂P∂T = 0.00105(7)] cannot be ignored, as it was assumed in previous studies. Finally, we calibrated a Raman shift P-T sensor of c-BN up to 15 GPa and 1300 K as follows:P = A ( T ) − A ( T ) 2 + 0.2194 B ( T , Δ v ) 0.1097where A(T) = 3.47(6) + 0.00105(7)T, B(T, ΔνTO) = 2.81(51) – 0.0053(16)T – 1.78(11) × 10–5T2 – ΔνTO. The c-BN Raman shift P-T sensor in this study fills the P-T gap ranging from previously performed externally resistance-heated to laser-heated DAC experiments. The effect of c-BN grain size and Raman system laser power on the calibration were also tested for the P-T sensor. In addition, we conducted three sets of high-P-T experiments to test the practicability of c-BN P-T sensor for water-rock interaction experiments in DAC. Testing experiments showed c-BN has very stable chemical activity in water and clear Raman signal at high-P-T conditions in comparison with other P-T sensors (e.g., ruby, Sm2+:SrB4O7, and quartz). Hence, the Raman shifts of c-BN may serve as an ideal P-T sensor for studying water-rock interactions in a DAC, especially at high-P and high-T conditions relevant to subduction zones.
- 1 March 2023
- Published by Mineralogical Society of America in American Mineralogist: Journal of Earth and Planetary Materials
- Vol. 108 (3) , 455-464
Raman shifts ofc-BN as an idealP-Tsensor for studying water-rock interactions in a diamond-anvil cell
Cubic boron nitride (c-BN) has the same structure as diamond, and it shows very inert reaction activity in different chemical environments, even under high-pressure (P) and high-temperature (T) conditions. Furthermore, the P- and T-dependent Raman shift of c-BN (e.g., TO mode) can be distinguished from that of the diamond anvil (c-BN at ~1054 cm–1 vs. diamond at ~1331 cm–1 at ambient conditions), making c-BN a potential P-T sensor for diamond-anvil cell (DAC) experiments. However, the Raman shift of c-BN has not been well studied at high P-T conditions, especially at temperatures above 700 K. In this study, we systematically calibrated the Raman shift of the TO mode (νTO) for synthetic c-BN grains at high-P and high-T conditions up to 15 GPa and 1300 K. Both ruby (Mao et al. 1986) and Sm2+:SrB4O7 (Datchi et al. 2007) were used as internally consistent standards for calibration of c-BN P-T sensor. Our results show that the Raman shift of c-BN is negatively correlated with temperature [∂νTO/∂T = –0.02206(71)] but positively correlated with pressure [∂νTO/∂P = –3.35(2)]. More importantly, we found that the P-T cross derivative for the Raman shift of c-BN [∂2νTO/∂P∂T = 0.00105(7)] cannot be ignored, as it was assumed in previous studies. Finally, we calibrated a Raman shift P-T sensor of c-BN up to 15 GPa and 1300 K as follows:P = A ( T ) − A ( T ) 2 + 0.2194 B ( T , Δ v ) 0.1097where A(T) = 3.47(6) + 0.00105(7)T, B(T, ΔνTO) = 2.81(51) – 0.0053(16)T – 1.78(11) × 10–5T2 – ΔνTO. The c-BN Raman shift P-T sensor in this study fills the P-T gap ranging from previously performed externally resistance-heated to laser-heated DAC experiments. The effect of c-BN grain size and Raman system laser power on the calibration were also tested for the P-T sensor. In addition, we conducted three sets of high-P-T experiments to test the practicability of c-BN P-T sensor for water-rock interaction experiments in DAC. Testing experiments showed c-BN has very stable chemical activity in water and clear Raman signal at high-P-T conditions in comparison with other P-T sensors (e.g., ruby, Sm2+:SrB4O7, and quartz). Hence, the Raman shifts of c-BN may serve as an ideal P-T sensor for studying water-rock interactions in a DAC, especially at high-P and high-T conditions relevant to subduction zones.
- Open Access
Age and Composition of Columbite-Tantalite Group Minerals in the Spodumene Pegmatite from the Chakabeishan Deposit, Northern Tibetan Plateau and Their Implications
The Chakabeishan (CKBS) deposit is the first pegmatite-type Li-Be deposit discovered in the eastern North Qaidam Tectonic Belt (NQTB) of Tibetan Plateau. The correct understanding of its petrogenesis and the precise determination of its formation age are of great significance for further regional prospecting and the discovery of new economically valuable rare-metal deposits. Therefore, a systematic study of texture, major-element composition, and U-Pb dating of columbite-tantalite group minerals (CGMs) in the spodumene pegmatite dyke from the CKBS deposit was undertaken. Three types of CGMs were identified, including concentric oscillatory ferrocolumbite (CGMs-1), homogeneous ferrocolumbite (CGMs-2), and irregular ferrotantalite (minor manganocolumbite) with abundant early ferrocolumbite replacement remnants (CGMs-3). The zoning patterns and chemical compositions in the CGMs record the complex evolutionary history of their host pegmatite from the magmatic stage (CGMs-1, disequilibrium crystallization) to the magmatic-hydrothermal transition stage (CGMs-2, equilibrium crystallization) and then to the late metasomatic stage (CGMs-3, replacement/re-equilibrium). CGMs U-Pb dating results suggest that the spodumene pegmatite dyke (No.15) emplaced at 230.1 ± 2.6 Ma. Subsequently, it experienced fluid metasomatism at 221 ± 5.3 Ma. Based on the new age data and published geochronological data, it can be concluded that the spodumene pegmatite dykes in the CKBS deposit formed in an oceanic subduction-related setting, representing a new metallogenic event in western China. Except for the CKBS deposit, a large number of rare-metal pegmatite dykes have also been discovered in the eastern NQTB, indicating that the eastern NQTB may be an important potential rare-metal metallogenic belt that should be explored in detail and arouse painstaking attention.
Open AccessAge and Composition of Columbite-Tantalite Group Minerals in the Spodumene Pegmatite from the Chakabeishan Deposit, Northern Tibetan Plateau and Their Implications
The Chakabeishan (CKBS) deposit is the first pegmatite-type Li-Be deposit discovered in the eastern North Qaidam Tectonic Belt (NQTB) of Tibetan Plateau. The correct understanding of its petrogenesis and the precise determination of its formation age are of great significance for further regional prospecting and the discovery of new economically valuable rare-metal deposits. Therefore, a systematic study of texture, major-element composition, and U-Pb dating of columbite-tantalite group minerals (CGMs) in the spodumene pegmatite dyke from the CKBS deposit was undertaken. Three types of CGMs were identified, including concentric oscillatory ferrocolumbite (CGMs-1), homogeneous ferrocolumbite (CGMs-2), and irregular ferrotantalite (minor manganocolumbite) with abundant early ferrocolumbite replacement remnants (CGMs-3). The zoning patterns and chemical compositions in the CGMs record the complex evolutionary history of their host pegmatite from the magmatic stage (CGMs-1, disequilibrium crystallization) to the magmatic-hydrothermal transition stage (CGMs-2, equilibrium crystallization) and then to the late metasomatic stage (CGMs-3, replacement/re-equilibrium). CGMs U-Pb dating results suggest that the spodumene pegmatite dyke (No.15) emplaced at 230.1 ± 2.6 Ma. Subsequently, it experienced fluid metasomatism at 221 ± 5.3 Ma. Based on the new age data and published geochronological data, it can be concluded that the spodumene pegmatite dykes in the CKBS deposit formed in an oceanic subduction-related setting, representing a new metallogenic event in western China. Except for the CKBS deposit, a large number of rare-metal pegmatite dykes have also been discovered in the eastern NQTB, indicating that the eastern NQTB may be an important potential rare-metal metallogenic belt that should be explored in detail and arouse painstaking attention.