Courtney Shafer
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Courtney Shafer has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
Alexander Hager
Fluid Dynamics and Solid Mechanics Group, Los Alamos National Laboratory, Los Alamos, NM, USA
3 shared publications- Carolyn Branecky Begeman
Fluid Dynamics and Solid Mechanics Group, Los Alamos National Laboratory, Los Alamos, NM, USA
3 shared publications - Daniel Francis Martin
Lawrence Berkeley National Laboratory
3 shared publications - Darin Comeau
Fluid Dynamics and Solid Mechanics Group, Los Alamos National Laboratory, Los Alamos, NM, USA
3 shared publications - Helene Seroussi
Dartmouth College, Unknown, Hanover, New Hampshire, United States [US
3 shared publications Holly Han
Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA, USA
3 shared publications
Latest Publications
- Open Access
- 15 September 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-34
Comment on egusphere-2026-4556
Ocean-forced melt of ice shelves is a key determinant of the stability of the Antarctic Ice Sheet (AIS). Currently, most Earth-system models (ESMs) do not simulate ocean circulation in the cavities beneath ice shelves, and ice-sheet models must infer ice-shelf melt rates from ocean conditions external to the ice shelf. A recent configuration of the Energy Exascale Earth System Model, E3SMv2.1, resolves ocean conditions within ice-shelf cavities with an eddy-permitting mesh in the Southern Ocean. Using projected ocean temperatures from E3SMv2.1 that follow prescribed historical and SSP3-7.0 emission scenarios, we parameterize ice-shelf melt using 1) simulated thermal forcing (TF) within cavities and 2) extrapolated TF from the ice-shelf calving front, similar to the community-standard approach when ice-shelf cavities are absent. We then force the MPAS-Albany Land Ice (MALI) ice-sheet model with the parameterized melt from both methods and project AIS mass change to 2100. Results show that using simulated TF from ice-shelf cavities yields a smaller sea-level contribution (SLC) from the AIS through 2100, by ~4 mm (~13 %), compared to the experiment that uses extrapolated ocean conditions from the calving front. In the context of other ice-sheet model uncertainties, an SLC projection error of this size may be acceptable. If open ocean conditions become warmer than simulated cavity conditions beyond 2100, extrapolation risks overestimating the SLC by a larger margin. Our results demonstrate the value of using cavity-resolving ocean models for multi-century ice-sheet projections.
- 15 September 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-34
Open AccessComment on egusphere-2026-4556
Ocean-forced melt of ice shelves is a key determinant of the stability of the Antarctic Ice Sheet (AIS). Currently, most Earth-system models (ESMs) do not simulate ocean circulation in the cavities beneath ice shelves, and ice-sheet models must infer ice-shelf melt rates from ocean conditions external to the ice shelf. A recent configuration of the Energy Exascale Earth System Model, E3SMv2.1, resolves ocean conditions within ice-shelf cavities with an eddy-permitting mesh in the Southern Ocean. Using projected ocean temperatures from E3SMv2.1 that follow prescribed historical and SSP3-7.0 emission scenarios, we parameterize ice-shelf melt using 1) simulated thermal forcing (TF) within cavities and 2) extrapolated TF from the ice-shelf calving front, similar to the community-standard approach when ice-shelf cavities are absent. We then force the MPAS-Albany Land Ice (MALI) ice-sheet model with the parameterized melt from both methods and project AIS mass change to 2100. Results show that using simulated TF from ice-shelf cavities yields a smaller sea-level contribution (SLC) from the AIS through 2100, by ~4 mm (~13 %), compared to the experiment that uses extrapolated ocean conditions from the calving front. In the context of other ice-sheet model uncertainties, an SLC projection error of this size may be acceptable. If open ocean conditions become warmer than simulated cavity conditions beyond 2100, extrapolation risks overestimating the SLC by a larger margin. Our results demonstrate the value of using cavity-resolving ocean models for multi-century ice-sheet projections.
- Open Access
- 20 August 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-34
Comment on egusphere-2026-4556
Ocean-forced melt of ice shelves is a key determinant of the stability of the Antarctic Ice Sheet (AIS). Currently, most Earth-system models (ESMs) do not simulate ocean circulation in the cavities beneath ice shelves, and ice-sheet models must infer ice-shelf melt rates from ocean conditions external to the ice shelf. A recent configuration of the Energy Exascale Earth System Model, E3SMv2.1, resolves ocean conditions within ice-shelf cavities with an eddy-permitting mesh in the Southern Ocean. Using projected ocean temperatures from E3SMv2.1 that follow prescribed historical and SSP3-7.0 emission scenarios, we parameterize ice-shelf melt using 1) simulated thermal forcing (TF) within cavities and 2) extrapolated TF from the ice-shelf calving front, similar to the community-standard approach when ice-shelf cavities are absent. We then force the MPAS-Albany Land Ice (MALI) ice-sheet model with the parameterized melt from both methods and project AIS mass change to 2100. Results show that using simulated TF from ice-shelf cavities yields a smaller sea-level contribution (SLC) from the AIS through 2100, by ~4 mm (~13 %), compared to the experiment that uses extrapolated ocean conditions from the calving front. In the context of other ice-sheet model uncertainties, an SLC projection error of this size may be acceptable. If open ocean conditions become warmer than simulated cavity conditions beyond 2100, extrapolation risks overestimating the SLC by a larger margin. Our results demonstrate the value of using cavity-resolving ocean models for multi-century ice-sheet projections.
- 20 August 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-34
Open AccessComment on egusphere-2026-4556
Ocean-forced melt of ice shelves is a key determinant of the stability of the Antarctic Ice Sheet (AIS). Currently, most Earth-system models (ESMs) do not simulate ocean circulation in the cavities beneath ice shelves, and ice-sheet models must infer ice-shelf melt rates from ocean conditions external to the ice shelf. A recent configuration of the Energy Exascale Earth System Model, E3SMv2.1, resolves ocean conditions within ice-shelf cavities with an eddy-permitting mesh in the Southern Ocean. Using projected ocean temperatures from E3SMv2.1 that follow prescribed historical and SSP3-7.0 emission scenarios, we parameterize ice-shelf melt using 1) simulated thermal forcing (TF) within cavities and 2) extrapolated TF from the ice-shelf calving front, similar to the community-standard approach when ice-shelf cavities are absent. We then force the MPAS-Albany Land Ice (MALI) ice-sheet model with the parameterized melt from both methods and project AIS mass change to 2100. Results show that using simulated TF from ice-shelf cavities yields a smaller sea-level contribution (SLC) from the AIS through 2100, by ~4 mm (~13 %), compared to the experiment that uses extrapolated ocean conditions from the calving front. In the context of other ice-sheet model uncertainties, an SLC projection error of this size may be acceptable. If open ocean conditions become warmer than simulated cavity conditions beyond 2100, extrapolation risks overestimating the SLC by a larger margin. Our results demonstrate the value of using cavity-resolving ocean models for multi-century ice-sheet projections.
- Open Access
- 6 August 2026
- Published by Copernicus GmbH in EGUsphere
Considering ocean conditions within ice-shelf cavities moderately reduces projected mass loss from the Antarctic Ice Sheet
Ocean-forced melt of ice shelves is a key determinant of the stability of the Antarctic Ice Sheet (AIS). Currently, most Earth-system models (ESMs) do not simulate ocean circulation in the cavities beneath ice shelves, and ice-sheet models must infer ice-shelf melt rates from ocean conditions external to the ice shelf. A recent configuration of the Energy Exascale Earth System Model, E3SMv2.1, resolves ocean conditions within ice-shelf cavities with an eddy-permitting mesh in the Southern Ocean. Using projected ocean temperatures from E3SMv2.1 that follow prescribed historical and SSP3-7.0 emission scenarios, we parameterize ice-shelf melt using 1) simulated thermal forcing (TF) within cavities and 2) extrapolated TF from the ice-shelf calving front, similar to the community-standard approach when ice-shelf cavities are absent. We then force the MPAS-Albany Land Ice (MALI) ice-sheet model with the parameterized melt from both methods and project AIS mass change to 2100. Results show that using simulated TF from ice-shelf cavities yields a smaller sea-level contribution (SLC) from the AIS through 2100, by ~4 mm (~13 %), compared to the experiment that uses extrapolated ocean conditions from the calving front. In the context of other ice-sheet model uncertainties, an SLC projection error of this size may be acceptable. If open ocean conditions become warmer than simulated cavity conditions beyond 2100, extrapolation risks overestimating the SLC by a larger margin. Our results demonstrate the value of using cavity-resolving ocean models for multi-century ice-sheet projections.
- 6 August 2026
- Published by Copernicus GmbH in EGUsphere
Open AccessConsidering ocean conditions within ice-shelf cavities moderately reduces projected mass loss from the Antarctic Ice Sheet
Ocean-forced melt of ice shelves is a key determinant of the stability of the Antarctic Ice Sheet (AIS). Currently, most Earth-system models (ESMs) do not simulate ocean circulation in the cavities beneath ice shelves, and ice-sheet models must infer ice-shelf melt rates from ocean conditions external to the ice shelf. A recent configuration of the Energy Exascale Earth System Model, E3SMv2.1, resolves ocean conditions within ice-shelf cavities with an eddy-permitting mesh in the Southern Ocean. Using projected ocean temperatures from E3SMv2.1 that follow prescribed historical and SSP3-7.0 emission scenarios, we parameterize ice-shelf melt using 1) simulated thermal forcing (TF) within cavities and 2) extrapolated TF from the ice-shelf calving front, similar to the community-standard approach when ice-shelf cavities are absent. We then force the MPAS-Albany Land Ice (MALI) ice-sheet model with the parameterized melt from both methods and project AIS mass change to 2100. Results show that using simulated TF from ice-shelf cavities yields a smaller sea-level contribution (SLC) from the AIS through 2100, by ~4 mm (~13 %), compared to the experiment that uses extrapolated ocean conditions from the calving front. In the context of other ice-sheet model uncertainties, an SLC projection error of this size may be acceptable. If open ocean conditions become warmer than simulated cavity conditions beyond 2100, extrapolation risks overestimating the SLC by a larger margin. Our results demonstrate the value of using cavity-resolving ocean models for multi-century ice-sheet projections.
- Open Access
- 4 February 2025
- Published by Copernicus GmbH in The Cryosphere
- Vol. 19 (2) , 541-563
ISMIP6-based Antarctic projections to 2100: simulations with the BISICLES ice sheet model
The contribution of the Antarctic Ice Sheet is one of the most uncertain components of sea level rise to 2100. Ice sheet models are the primary tool for projecting future sea level contribution from continental ice sheets. The Ice Sheet Model Intercomparison for the Coupled Model Intercomparison Phase 6 (ISMIP6) provided projections of the ice sheet contribution to sea level over the 21st century, quantifying uncertainty due to ice sheet model, climate model, emission scenario, and uncertain parameters. We present simulations following the ISMIP6 framework with the BISICLES ice sheet model and new experiments extending the ISMIP6 protocol to more comprehensively sample uncertainties in future climate, ice shelf sensitivity to ocean melting, and their interactions. These results contributed to the land ice projections of Edwards et al. (2021), which formed the basis of sea level projections for the Sixth Assessment Report of the Intergovernmental Panel on Climate Change (AR6). Our experiments show the important interplay between surface mass balance processes and ocean-driven melt in determining Antarctic sea level contribution. Under higher-warming scenarios, high accumulation offsets more ocean-driven mass loss when sensitivity to ocean-driven melt is low. Conversely, we show that when sensitivity to ocean warming is high, ocean melting drives increased mass loss despite high accumulation. Overall, we simulate a sea level contribution range across our experiments from 2 to 178 mm. Finally, we show that collapse of ice shelves due to surface warming increases sea level contribution by 25 mm relative to the no-collapse experiments, for both moderate and high sensitivity of ice shelf melting to ocean forcing.
- 4 February 2025
- Published by Copernicus GmbH in The Cryosphere
- Vol. 19 (2) , 541-563
Open AccessISMIP6-based Antarctic projections to 2100: simulations with the BISICLES ice sheet model
The contribution of the Antarctic Ice Sheet is one of the most uncertain components of sea level rise to 2100. Ice sheet models are the primary tool for projecting future sea level contribution from continental ice sheets. The Ice Sheet Model Intercomparison for the Coupled Model Intercomparison Phase 6 (ISMIP6) provided projections of the ice sheet contribution to sea level over the 21st century, quantifying uncertainty due to ice sheet model, climate model, emission scenario, and uncertain parameters. We present simulations following the ISMIP6 framework with the BISICLES ice sheet model and new experiments extending the ISMIP6 protocol to more comprehensively sample uncertainties in future climate, ice shelf sensitivity to ocean melting, and their interactions. These results contributed to the land ice projections of Edwards et al. (2021), which formed the basis of sea level projections for the Sixth Assessment Report of the Intergovernmental Panel on Climate Change (AR6). Our experiments show the important interplay between surface mass balance processes and ocean-driven melt in determining Antarctic sea level contribution. Under higher-warming scenarios, high accumulation offsets more ocean-driven mass loss when sensitivity to ocean-driven melt is low. Conversely, we show that when sensitivity to ocean warming is high, ocean melting drives increased mass loss despite high accumulation. Overall, we simulate a sea level contribution range across our experiments from 2 to 178 mm. Finally, we show that collapse of ice shelves due to surface warming increases sea level contribution by 25 mm relative to the no-collapse experiments, for both moderate and high sensitivity of ice shelf melting to ocean forcing.
- Open Access
- 3 June 2024
- Published by Copernicus GmbH
- Vol. 2024, 1-37
Comment on egusphere-2024-441
The contribution of the Antarctic ice sheet is one of the most uncertain components of sea level rise to 2100. Ice sheet models are the primary tool for projecting future sea level contribution from continental ice sheets. The Ice Sheet Model Intercomparison for the Coupled Model Intercomparison Phase 6 (ISMIP6) provided projections of the ice sheets contribution to sea level over the 21st century. It quantified uncertainty due to ice sheet model, climate scenario, forcing climate model and uncertain model parameters. We present simulations following the ISMIP6 framework with the BISICLES ice sheet model, alongside new experiments extending the ISMIP6 protocol to more comprehensively explore uncertain ice sheet processes. These results contributed to Antarctic projections of Edwards et al. (2021), which formed the basis of sea level projections for the Sixth Assessment Report of the Intergovernmental Panel on Climate Change (AR6). The BISICLES experiments presented here show the important interplay between surface mass balance forcing and ocean driven melt, with high warming, high accumulation forcing conditions leading to mass gain (negative sea level contribution) under low sensitivity to ocean driven melt. Conversely, we show that when sensitivity to ocean warming is high, ocean melting drives increased mass loss despite high accumulation. Finally, we show that collapse of ice shelves due to surface warming increases sea level contribution by 25 mm for both moderate and high sensitivity of ice shelf melting to ocean forcing tested.
- 3 June 2024
- Published by Copernicus GmbH
- Vol. 2024, 1-37
Open AccessComment on egusphere-2024-441
The contribution of the Antarctic ice sheet is one of the most uncertain components of sea level rise to 2100. Ice sheet models are the primary tool for projecting future sea level contribution from continental ice sheets. The Ice Sheet Model Intercomparison for the Coupled Model Intercomparison Phase 6 (ISMIP6) provided projections of the ice sheets contribution to sea level over the 21st century. It quantified uncertainty due to ice sheet model, climate scenario, forcing climate model and uncertain model parameters. We present simulations following the ISMIP6 framework with the BISICLES ice sheet model, alongside new experiments extending the ISMIP6 protocol to more comprehensively explore uncertain ice sheet processes. These results contributed to Antarctic projections of Edwards et al. (2021), which formed the basis of sea level projections for the Sixth Assessment Report of the Intergovernmental Panel on Climate Change (AR6). The BISICLES experiments presented here show the important interplay between surface mass balance forcing and ocean driven melt, with high warming, high accumulation forcing conditions leading to mass gain (negative sea level contribution) under low sensitivity to ocean driven melt. Conversely, we show that when sensitivity to ocean warming is high, ocean melting drives increased mass loss despite high accumulation. Finally, we show that collapse of ice shelves due to surface warming increases sea level contribution by 25 mm for both moderate and high sensitivity of ice shelf melting to ocean forcing tested.
- Open Access
- 27 February 2024
- Published by Copernicus GmbH in EGUsphere
- Vol. 2024, 1-37
ISMIP6-based Antarctic Projections to 2100: simulations with the BISICLES ice sheet model
The contribution of the Antarctic ice sheet is one of the most uncertain components of sea level rise to 2100. Ice sheet models are the primary tool for projecting future sea level contribution from continental ice sheets. The Ice Sheet Model Intercomparison for the Coupled Model Intercomparison Phase 6 (ISMIP6) provided projections of the ice sheets contribution to sea level over the 21st century. It quantified uncertainty due to ice sheet model, climate scenario, forcing climate model and uncertain model parameters. We present simulations following the ISMIP6 framework with the BISICLES ice sheet model, alongside new experiments extending the ISMIP6 protocol to more comprehensively explore uncertain ice sheet processes. These results contributed to Antarctic projections of Edwards et al. (2021), which formed the basis of sea level projections for the Sixth Assessment Report of the Intergovernmental Panel on Climate Change (AR6). The BISICLES experiments presented here show the important interplay between surface mass balance forcing and ocean driven melt, with high warming, high accumulation forcing conditions leading to mass gain (negative sea level contribution) under low sensitivity to ocean driven melt. Conversely, we show that when sensitivity to ocean warming is high, ocean melting drives increased mass loss despite high accumulation. Finally, we show that collapse of ice shelves due to surface warming increases sea level contribution by 25 mm for both moderate and high sensitivity of ice shelf melting to ocean forcing tested.
- 27 February 2024
- Published by Copernicus GmbH in EGUsphere
- Vol. 2024, 1-37
Open AccessISMIP6-based Antarctic Projections to 2100: simulations with the BISICLES ice sheet model
The contribution of the Antarctic ice sheet is one of the most uncertain components of sea level rise to 2100. Ice sheet models are the primary tool for projecting future sea level contribution from continental ice sheets. The Ice Sheet Model Intercomparison for the Coupled Model Intercomparison Phase 6 (ISMIP6) provided projections of the ice sheets contribution to sea level over the 21st century. It quantified uncertainty due to ice sheet model, climate scenario, forcing climate model and uncertain model parameters. We present simulations following the ISMIP6 framework with the BISICLES ice sheet model, alongside new experiments extending the ISMIP6 protocol to more comprehensively explore uncertain ice sheet processes. These results contributed to Antarctic projections of Edwards et al. (2021), which formed the basis of sea level projections for the Sixth Assessment Report of the Intergovernmental Panel on Climate Change (AR6). The BISICLES experiments presented here show the important interplay between surface mass balance forcing and ocean driven melt, with high warming, high accumulation forcing conditions leading to mass gain (negative sea level contribution) under low sensitivity to ocean driven melt. Conversely, we show that when sensitivity to ocean warming is high, ocean melting drives increased mass loss despite high accumulation. Finally, we show that collapse of ice shelves due to surface warming increases sea level contribution by 25 mm for both moderate and high sensitivity of ice shelf melting to ocean forcing tested.