Evelyn Granizo

Light–matter interactions in optical microcavities attract much attention due to their potential for controlling properties of materials. Among the various types of optical microcavities, porous silicon microcavities (pSiMCs) are of special interest because of their relatively simple fabrication procedure, tunable porosity, and large specific surface area, which make them highly suitable for a wide range of optoelectronic and sensing applications. However, the fabrication of pSiMCs with precisely controlled parameters, which is crucial for effective light–matter coupling, remains challenging due to the multiple variables involved in the process. In addition, the parameter characterizing the capacity of pSiMCs for confining light inside the cavity (the quality factor, QF) rarely exceeds 100. Here, we present advanced methods and protocols for controlled fabrication of pSiMCs at room temperature, combining theoretical and numerical simulations and experimental validation of microcavity structural parameters for enhancing light–matter interactions. This systemic approach has been used to design and fabricate pSiMCs with an about twofold increased QF and correspondingly improved optical performance; the theoretical modeling shows that its further development is expected to increase the QF even more. In addition, we fabricated hybrid fluorescencent structures with the R6G dye embedded into the optimized pSiMCs. This provided a 5.8-fold narrowing of the R6G fluorescence spectrum caused by light–matter coupling, which indicated enhancement of the fluorescence signal at the eigenmode wavelength due to an increased rate of spontaneous emission in the cavity. The proposed methodology offers precise theoretical simulation of microcavities with the parameters required for specific practical applications, which facilitates optimization of microcavity design. The controllable optical properties of pSiMCs make them promising candidates for a wide range of applications where improved spectral resolution, and increased luminescence efficiency are required. This paves the way for further innovations in photonic systems and optoelectronic devices.

Functionalized optical microcavities constitute an emerging highly sensitive and highly selective sensing technology. By combining optical microcavities with novel materials, microcavity sensors offer exceptional precision, unlocking considerable potential for medical diagnostics, physical and chemical analyses, and environmental monitoring. The high capabilities of functionalized microcavities enable subwavelength light detection and manipulation, facilitating the precise detection of analytes. Furthermore, recent advancements in miniaturization have paved the way for their integration into portable platforms. For leveraging the potential of microcavity sensors, it is crucial to address challenges related to the need for increasing cost-effectiveness, enhancing selectivity and sensitivity, enabling real-time measurements, and improving fabrication techniques. New strategies include the use of advanced materials, the optimization of signal processing, hybrid design approaches, and the employment of artificial intelligence. This review outlines the key strategies toward enhancing the performance of optical microcavities, highlights their broad applicability across various fields, and discusses the challenges that should be overcome to unlock their full potential.

Functionalized optical microcavities constitute an emerging highly sensitive and highly selective sensing technology. By combining optical microcavities with novel materials, microcavity sensors offer exceptional precision, unlocking considerable potential for medical diagnostics, physical and chemical analyses, and environmental monitoring. The high capabilities of functionalized microcavities enable subwavelength light detection and manipulation, facilitating precise detection of analytes. Furthermore, recent advancements in miniaturization have paved the way for their integration into portable platforms. For leveraging the potential of microcavity sensors, it is crucial to address challenges related to the need for increasing cost-effectiveness, enhancing selectivity and sensitivity, enabling real-time measurements, and improving fabrication techniques. New strategies include the use of advanced materials, optimization of signal processing, hybrid design approaches, and employment of artificial intelligence. This review outlines the key strategies towards enhancing the performance of optical microcavities, highlights their broad applicability across various fields, and discusses the challenges that must be overcome to unlock their full potential.

The combination of micro- or nanofluidics and strong light–matter coupling has gained much interest in the past decade, which has led to the development of advanced systems and devices with numerous potential applications in different fields, such as chemistry, biosensing, and material science. Strong light–matter coupling is achieved by placing a dipole (e.g., an atom or a molecule) into a confined electromagnetic field, with molecular transitions being in resonance with the field and the coupling strength exceeding the average dissipation rate. Despite intense research and encouraging results in this field, some challenges still need to be overcome, related to the fabrication of nano- and microscale optical cavities, stability, scaling up and production, sensitivity, signal-to-noise ratio, and real-time control and monitoring. The goal of this paper is to summarize recent developments in micro- and nanofluidic systems employing strong light–matter coupling. An overview of various methods and techniques used to achieve strong light–matter coupling in micro- or nanofluidic systems is presented, preceded by a brief outline of the fundamentals of strong light–matter coupling and optofluidics operating in the strong coupling regime. The potential applications of these integrated systems in sensing, optofluidics, and quantum technologies are explored. The challenges and prospects in this rapidly developing field are discussed.

The combination of micro- or nanofluidics and strong light–matter coupling has gained much interest in the past decade, which has led to the development of advanced systems and devices with numerous potential applications in different fields, such as chemistry, biosensing, and material science. Strong light–matter coupling is achieved by placing a dipole (e.g. an atom or a molecule) into a confined electromagnetic field, with molecular transitions being in resonance with the field and the coupling strength exceeding the average dissipation rate. Despite intense research and encouraging results in this field, some challenges still need to be overcome, related to the fabrication of nano- and microscale optical cavities, stability, scaling up and production, sensitivity, signal-to-noise ratio, and real-time control and monitoring. The goal of this paper is to summarize recent developments of micro- and nanofluidic systems employing strong light–matter coupling. An overview of various methods and techniques used to achieve strong light–matter coupling in micro- or nanofluidic systems is presented, preceded by a brief outline of the fundamentals of strong light–matter coupling and optofluidics operating in the strong coupling regime. The potential applications of these integrated systems in sensing, optofluidics, and quantum technologies are explored. The challenges and prospects in this rapidly developing field are discussed.

Light–matter interaction leads to excitation of molecules, which, in turn, can exchange energy with a localized electromagnetic field. This can be used for engineering of the electronic and vibrational energy levels of the molecules. This study considers the conditions for the emergence of the strong light–matter coupling regime for organic dye molecules in a tunable Fabry–Perot microcavity formed by a convex mirror and a flat reflecting surface. The sample studied was made of hexagonal boron nitride (hBN), polyvinylpyrrolidone polymer (PVP, 55 kDa), and rhodamine 6G fluorophore (R6G). Strong light–matter coupling was obtained in a sample with a low concentration of PVP. Adjustment of the optical path length in the microcavity by varying the thickness of the hBN–R6G–PVP film made it possible to obtain a high density of modes in the cavity (several tens of (λ/n)³) and, hence, to study the weak and strong light–matter coupling regimes. The results offer the possibility of studying the basic mechanisms of resonant light–matter interaction at room temperature, as well as developing new practical applications of the strong coupling effect.

Enhancement of quantum dot (QD) fluorescence in a hybrid system of a porous silicon microcavity (pSiMC) and silver nanoplatelets (AgNPs) has been estimated using numerical simulation. The system was simulated as a periodic unit cell made of a pSiMC with a resonant wavelength peak at 605 nm, an AgNP with a resonance at 604 nm and a quantum dot (QD) with an emission peak at 605 nm. For comparison, simulations were performed for an AgNP and a QD in a reference single-layered system with a high refractive index. The QD fluorescence was enhanced in the AgNP/pSiMC hybrid system, mainly due to the higher excitation rate.

Plasmon-induced enhancement of the photoluminescence (PL) intensity of quantum emitters by plasmon nanoparticles (PNPs) is a promising approach for the design and fabrication of PL hybrid materials with improved properties for biosensing and optoelectronics applications. This enhancement can be achieved through careful selection of such parameters as the PNP’s shape, material, size, the type of the medium around them, as well as the excitation and emission wavelengths of the emitter. Here, we simulated the nano-hybrid materials based on arrays of silver nanospheres, nanoprisms, and their combinations, located on polymer films with embedded dipole emitters. For these systems, the Purcell effect, as well as the excitation enhancement, transmittance, and absorption were evaluated. The results show the way to improve the PL properties of thin hybrid films by careful design of their composition using developed models.