Tanmoy Maity
Tanmoy Maity has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Brent S. Sumerlin
University of Florida
4 shared publications - Rhys W. Hughes
University of Florida
4 shared publications Isabella S. Zastrow
George & Josephine Butler Polymer Research Laboratory, Department of Chemistry, Center for Macromolecular Science & Engineering
2 shared publicationsJames B. Young
George & Josephine Butler Polymer Research Laboratory, Center for Macromolecular Science & Engineering, Department of Chemistry
2 shared publications- Alex H. Balzer
University of Delaware
1 shared publication - Austin M. Evans
University of Florida
1 shared publication
Latest Publications
- Top Cited Papers
- 14 January 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (3) , 3336-3342
Electrochemically Initiated Depolymerization of Poly(Methyl Methacrylate)
Efficient depolymerization of polymers with all-carbon backbones under mild conditions would be valuable in chemically recycling commodity plastics. Poly(methyl methacrylate) (PMMA) is a commodity thermoplastic that is currently depolymerized at temperatures in excess of 400 °C. Herein, we lower the temperatures needed to depolymerize PMMA by performing radical generation and depropagation with orthogonal stimuli. This first demonstration of electrochemically initiated PMMA depolymerization relies on reduction of phthalimide esters that, upon subsequent decarboxylation, generate polymer-centered radicals. These radicals then spontaneously unzip the polymer back to its monomeric constituents at temperatures as low as 105 °C. We studied the mechanism and efficiency of this transformation as a function of phthalimide ester placement, incorporation density, and polymer molecular weight. We found that chain-end activation is effective for modest molecular weights but suffers diminished efficiency at higher degrees of polymerization. In contrast, pendent-group activation is more effective for depolymerizing higher molecular weight species. Integrating higher molar amounts of phthalimide ester pendants leads to more effective depolymerization, with >95% depolymerization in copolymers with 5 mol % phthalimide ester incorporation. We leveraged this understanding to create a custom electro-distillation apparatus that allowed us to simultaneously electrochemically depolymerize PMMA and directly distill methyl methacrylate, which could ultimately be repolymerized. These findings establish electrochemistry as a versatile and orthogonal stimulus for vinyl polymer depolymerization and provide a foundation for closed-loop electrochemical recycling of widely used plastics.
- 14 January 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (3) , 3336-3342
Top Cited PapersElectrochemically Initiated Depolymerization of Poly(Methyl Methacrylate)
Efficient depolymerization of polymers with all-carbon backbones under mild conditions would be valuable in chemically recycling commodity plastics. Poly(methyl methacrylate) (PMMA) is a commodity thermoplastic that is currently depolymerized at temperatures in excess of 400 °C. Herein, we lower the temperatures needed to depolymerize PMMA by performing radical generation and depropagation with orthogonal stimuli. This first demonstration of electrochemically initiated PMMA depolymerization relies on reduction of phthalimide esters that, upon subsequent decarboxylation, generate polymer-centered radicals. These radicals then spontaneously unzip the polymer back to its monomeric constituents at temperatures as low as 105 °C. We studied the mechanism and efficiency of this transformation as a function of phthalimide ester placement, incorporation density, and polymer molecular weight. We found that chain-end activation is effective for modest molecular weights but suffers diminished efficiency at higher degrees of polymerization. In contrast, pendent-group activation is more effective for depolymerizing higher molecular weight species. Integrating higher molar amounts of phthalimide ester pendants leads to more effective depolymerization, with >95% depolymerization in copolymers with 5 mol % phthalimide ester incorporation. We leveraged this understanding to create a custom electro-distillation apparatus that allowed us to simultaneously electrochemically depolymerize PMMA and directly distill methyl methacrylate, which could ultimately be repolymerized. These findings establish electrochemistry as a versatile and orthogonal stimulus for vinyl polymer depolymerization and provide a foundation for closed-loop electrochemical recycling of widely used plastics.
- Top Cited Papers
- 5 January 2026
- Published by American Chemical Society (ACS) in ACS Macro Letters
- Vol. 15 (1) , 17-32
Depolymerization of Vinyl Polymers
Depolymerization is a promising approach to reduce plastic waste by regenerating monomers from polymers, presenting a compelling solution to maintain a circular polymer economy. However, vinyl polymers with all-carbon backbones are especially difficult to depolymerize due to significant thermodynamic and kinetic barriers. Developments in reversible-deactivation radical polymerization and catalytic methods demonstrate how tuning polymer structure and reaction conditions can address these challenges. This Viewpoint revisits early studies on radical depolymerization and recent advances enabling monomer recovery at lower temperatures. Exciting current trends to utilize depolymerization as a strategy for tuning polymer material properties and upcycling waste polymer to high-value products are discussed. We outline key directions to make vinyl polymer depolymerization scalable, efficient, and economically viable.
- 5 January 2026
- Published by American Chemical Society (ACS) in ACS Macro Letters
- Vol. 15 (1) , 17-32
Top Cited PapersDepolymerization of Vinyl Polymers
Depolymerization is a promising approach to reduce plastic waste by regenerating monomers from polymers, presenting a compelling solution to maintain a circular polymer economy. However, vinyl polymers with all-carbon backbones are especially difficult to depolymerize due to significant thermodynamic and kinetic barriers. Developments in reversible-deactivation radical polymerization and catalytic methods demonstrate how tuning polymer structure and reaction conditions can address these challenges. This Viewpoint revisits early studies on radical depolymerization and recent advances enabling monomer recovery at lower temperatures. Exciting current trends to utilize depolymerization as a strategy for tuning polymer material properties and upcycling waste polymer to high-value products are discussed. We outline key directions to make vinyl polymer depolymerization scalable, efficient, and economically viable.
- 3 June 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (23) , 19485-19490
Retrofitting PMMA with a Thermal Trigger for Efficient Depolymerization
This work reports an efficient closed-loop bulk depolymerization method applicable to commercially available PMMA. Acid hydrolysis (N-hydroxyphthalimide are used to incorporate a thermally sensitive trigger that allows efficient depolymerization of PMMA at a temperature lower than conventionally employed. We showed that this strategy is applicable to model PMMA homopolymers with molecular weights ranging from 28 to 1140 kg/mol. The same method was used for efficient bulk depolymerization (∼70%) of commercially available PMMA (Mn = 439 kg/mol), supporting the efficacy of this work for practical applications. Furthermore, we demonstrate that this method can be leveraged to generate depolymerizable polymer networks. The depolymerization approach reported here holds potential to mitigate polymethacrylate waste and maintain a sustainable polymer economy.
- 3 June 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (23) , 19485-19490
Retrofitting PMMA with a Thermal Trigger for Efficient Depolymerization
This work reports an efficient closed-loop bulk depolymerization method applicable to commercially available PMMA. Acid hydrolysis (N-hydroxyphthalimide are used to incorporate a thermally sensitive trigger that allows efficient depolymerization of PMMA at a temperature lower than conventionally employed. We showed that this strategy is applicable to model PMMA homopolymers with molecular weights ranging from 28 to 1140 kg/mol. The same method was used for efficient bulk depolymerization (∼70%) of commercially available PMMA (Mn = 439 kg/mol), supporting the efficacy of this work for practical applications. Furthermore, we demonstrate that this method can be leveraged to generate depolymerizable polymer networks. The depolymerization approach reported here holds potential to mitigate polymethacrylate waste and maintain a sustainable polymer economy.
- Top Cited Papers
- 21 February 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (9) , 6217-6224
Bulk Depolymerization of Methacrylate Polymers via Pendent Group Activation
In this study, we present an efficient approach for the depolymerization of poly(methyl methacrylate) (PMMA) copolymers synthesized via conventional radical polymerization. By incorporating low mol % phthalimide ester-containing monomers during the polymerization process, colorless and transparent polymers closely resembling unfunctionalized PMMA are obtained, which can achieve >95% reversion to methyl methacrylate (MMA). Notably, our catalyst-free bulk depolymerization method exhibits exceptional efficiency, even for high-molecular-weight polymers, including ultrahigh-molecular-weight (106-107 g/mol) PMMA, where near-quantitative depolymerization is achieved. Moreover, this approach yields polymer byproducts of significantly lower molecular weight, distinguishing it from bulk depolymerization methods initiated from chain ends. Furthermore, we extend our investigation to polymethacrylate networks, demonstrating high extents of depolymerization. This innovative depolymerization strategy offers promising opportunities for the development of sustainable polymethacrylate materials, holding great potential for various applications in polymer science.
- 21 February 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (9) , 6217-6224
Top Cited PapersBulk Depolymerization of Methacrylate Polymers via Pendent Group Activation
In this study, we present an efficient approach for the depolymerization of poly(methyl methacrylate) (PMMA) copolymers synthesized via conventional radical polymerization. By incorporating low mol % phthalimide ester-containing monomers during the polymerization process, colorless and transparent polymers closely resembling unfunctionalized PMMA are obtained, which can achieve >95% reversion to methyl methacrylate (MMA). Notably, our catalyst-free bulk depolymerization method exhibits exceptional efficiency, even for high-molecular-weight polymers, including ultrahigh-molecular-weight (106-107 g/mol) PMMA, where near-quantitative depolymerization is achieved. Moreover, this approach yields polymer byproducts of significantly lower molecular weight, distinguishing it from bulk depolymerization methods initiated from chain ends. Furthermore, we extend our investigation to polymethacrylate networks, demonstrating high extents of depolymerization. This innovative depolymerization strategy offers promising opportunities for the development of sustainable polymethacrylate materials, holding great potential for various applications in polymer science.