MZMengyu Zhou

Mengyu Zhou

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Mengyu Zhou has a total of 8 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Research on the Absorption Performance of Glass Fiber Fabric Composites Coated with Nickel by Magnetron Sputtering

    by Zhuohui Zhou, Yanli Wang, Mengyu Zhou, Zhiyong Wang, Yan Zhao

    This study focuses on the deposition of nickel thin-films onto glass fiber fabric via DC magnetron sputtering and explores their potential for broadband microwave absorption applications. A total of twelve laminate samples were prepared by integrating the coated fabrics with epoxy resin, with sputtering powers ranging from 0.5 to 2 kW and deposition times ranging from 10 to 90 min. The microstructure, surface resistance, electromagnetic parameters, and microwave absorption performance were systematically characterized using SEM, XRD, four-point probe measurements, and vector network analysis, supplemented by the Lorentz model fitting and simulation validation. The results indicate that the nickel coatings exhibit a non-uniform arc-like morphology, with preferential growth along the (111) crystallographic plane, while the (200) and (220) planes form under specific conditions. The surface resistance reaches up to 108 Ω·m, suggesting the absence of a continuous conductive network. Electromagnetic parameter analysis reveals that the laminates display dielectric-loss-dominated microwave absorption, and the Lorentz fitting identifies double resonance peaks under prolonged or high-power sputtering. The addition of a dielectric matching layer further enhances the absorption performance. All samples achieve wideband absorption within the Ku-band. Notably, the samples prepared at 1 kW for 30 min and at 1 kW for 90 min both exhibit a reflectivity of ≤−10 dB across the entire 8–18 GHz frequency range. The experimental results are in good agreement with simulations. The bulk density of the laminates is approximately 1.8 g/cm3. These findings confirm that magnetron-sputtered nickel-coated continuous glass fiber fabrics hold considerable promise for wideband microwave absorption applications.

  • Open Access

    Research on the Absorption Properties of Fe70Ni30 Alloy/SiO2 Coated Continuous Glass Fiber Composites by Magnetron Sputtering

    by Zhuohui Zhou, Mengyu Zhou, Zhiyong Wang, Yan Zhao

    In this study, Fe70Ni30 metal was deposited onto continuous glass fiber composites via magnetron sputtering, followed by surface coating with SiO2. The effects of key process parameters-including Fe70Ni30 sputtering duration (2, 5, 10, 20, and 30 min) and SiO2 surface coating-on the electromagnetic properties and microwave absorption performance of the materials were systematically investigated. Scanning electron microscopy (SEM) characterization revealed that as sputtering time increased, the metal coating evolved from discrete small particles into a continuous film. Cross-sectional SEM analysis further demonstrated the formation of a bilayer structure after SiO2 introduction. X-ray diffraction (XRD) patterns confirmed the presence of diffraction peaks corresponding to the Fe70Ni30 alloy solid solution. Electromagnetic parameter measurements indicated that the influence of sputtering time on electromagnetic properties was primarily pronounced during the metal layer growth stage; once a continuous film was formed, the variation in electromagnetic parameters diminished. Concurrently, the SiO2 coating exhibited a significant regulatory effect on dielectric parameters. Reflection coefficient calculations showed that the optimal absorption thickness for the single-layer material ranged from 2.5 to 3.0 mm, with the absorption peak shifting toward lower frequencies as thickness increased. However, the effective absorption bandwidth (EAB) was only 3–5 GHz, failing to meet wideband requirements. In contrast, the three-layer composite structure (total thickness: 3.8 mm) optimized via genetic algorithm achieved impedance gradient and loss synergy, expanding the EBW (R < −10 dB) from 4.8 GHz (single layer) to 10 GHz (8–18.0 GHz)-a substantial improvement over the single-layer configuration. This work provides experimental evidence and technical support for the structural design and process optimization of lightweight, high-efficiency, wideband microwave-absorbing materials.

  • Top Cited Papers
    Open Access

    Composition and Structural Design of Magnetic Alloy/Composites for High-Performance Microwave Absorption: A Review

    by Mengyu Zhou, Zhuohui Zhou, Hongfei Cheng

    Magnetic metals are of considerable importance for stealth technology and electromagnetic pollution control. However, they suffer from inherent limitations, such as the Snoek limit and narrow absorption bandwidth, which restrict their applications in complex scenarios. To address these challenges, this review systematically summarizes the recent advances of magnetic metal-based microwave-absorbing materials (MAMs), focusing on four core directions: alloy design, composite engineering, structural regulation, and preparation technology. The intensity and frequency bands of absorption in alloys are dictated by the material’s composition as well as its structural attributes. Moreover, composite systems incorporating carbon materials, MXenes, oxides, ceramics, and conductive polymers are discussed, where the synergistic design of components optimizes impedance matching and loss mechanisms. Key structural design strategies include core-shell structures, interface engineering, self-assembled hierarchical structures, and macroscopic structural design. These structures achieve the synergistic improvement of thin, lightweight, broadband, and strong absorption performance by enhancing interface polarization, multiple scattering, and resonance effects, while endowing materials with excellent environmental stability. Notably, metamaterial-based designs can further achieve an ultrawide bandwidth spanning 0.3–18 GHz. Additionally, preparation processes are crucial for regulating the microstructure and activating loss mechanisms. This review aims to offer theoretical and practical insights for developing high-performance, multifunctional magnetic MAMs.


  • Open Access

    Ultra-Thin and Broadband P-Band Metamaterial Absorber Based on Carbonyl Iron Powder Composites

    by Mengyu Zhou, Yubin Chen, Yuguang He, Cheng Yang

    The field of P-band (0.3–1 GHz) absorption has witnessed rapid development in metamaterial absorbers due to their exceptional designability and the absence of restrictions imposed by the one-fourth wavelength rule. In this study, we combined carbonyl iron powder (CIP) composites with a periodic structure composed of metal capacitive patterns and employed a genetic algorithm (GA) to optimize the electromagnetic parameters of the CIP substrate. By selecting the appropriate shape and material for the units of pattern based on transmission line theory, as well as regulating relevant structural parameters, we successfully designed an ultra-thin broadband metamaterial absorber for the P-band. Experimental results demonstrate that within the range of 0.3–0.85 GHz, the reflection loss of our absorber remains below −5 dB, with a maximum value of −9.54 dB occurring at 0.45 GHz. Remarkably, this absorber possesses a thickness equivalent to only 1/293 of its working wavelength. Then, we conducted analyses on electric field distribution, magnetic field distribution, and energy loss density. Our findings suggest that high-performance absorption in metamaterials can be attributed to λ/4 resonant or coupling effects between structural units or diffraction phenomena. This absorber offers several advantages, including broad low-frequency absorption capability, ultra-thin profile, and convenient fabrication process, thus providing valuable theoretical insights for designing metamaterial structures.