Yali Mao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yali Mao has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Chao Yuan
School of Integrated Circuits, Wuhan University 2 , Wuhan 430072
5 shared publications - Haiding Sun
University of Science and Technology of China
3 shared publications - Haochen Zhang
GaN Laboratory, School of Microelectronics, University of Science and Technology of China, Hefei, China
3 shared publications - Shaojie Zhou
Institute of Technological Sciences, Wuhan University, Wuhan, China
3 shared publications Mei Wu
State Key Discipline Laboratory of Wide Band-gap Semiconductor Technology, School of Microelectronics, Xidian University, Xian, China
2 shared publicationsXing Hu
Yangtze Laboratory, Wuhan, China
2 shared publications
Latest Publications
- 18 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (5) , 2623-2631
Rapid Forecast of Device Transient Temperature Response at Wafer Level Through Transducer-Less Thermoreflectance Technique
GaN high electron mobility transistors (HEMTs) may undergo significant transient thermal shock during high-frequency and high-power operation, compromising their performance stability and reliability. Therefore, it is crucial to study the transient temperature response of devices for effective thermal management. In this study, we explore the potential of the transducer-less transient thermoreflectance (TL-TTR) technique, which can rapidly forecast the transient temperature response of devices from the as-grown wafers without the need for device fabrication. Several GaN wafers on common substrates (Si and SiC) are measured to assess the capability of this method. For the GaN HEMTs with an epitaxial layer thickness of ~1800 nm, we quantify the critical switching frequency of 16.7 MHz, at which severe thermal accumulation effects can be avoided under 50% duty cycle operation for the GaN-on-Si devices. The finite element (FE) model verifies the TL-TTR results. This method also forecasts the critical switching frequency of the device for other GaN thicknesses. The TL-TTR technique is expected to be an effective method to directly characterize the transient temperature response of GaN HEMTs.
- 18 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (5) , 2623-2631
Rapid Forecast of Device Transient Temperature Response at Wafer Level Through Transducer-Less Thermoreflectance Technique
GaN high electron mobility transistors (HEMTs) may undergo significant transient thermal shock during high-frequency and high-power operation, compromising their performance stability and reliability. Therefore, it is crucial to study the transient temperature response of devices for effective thermal management. In this study, we explore the potential of the transducer-less transient thermoreflectance (TL-TTR) technique, which can rapidly forecast the transient temperature response of devices from the as-grown wafers without the need for device fabrication. Several GaN wafers on common substrates (Si and SiC) are measured to assess the capability of this method. For the GaN HEMTs with an epitaxial layer thickness of ~1800 nm, we quantify the critical switching frequency of 16.7 MHz, at which severe thermal accumulation effects can be avoided under 50% duty cycle operation for the GaN-on-Si devices. The finite element (FE) model verifies the TL-TTR results. This method also forecasts the critical switching frequency of the device for other GaN thicknesses. The TL-TTR technique is expected to be an effective method to directly characterize the transient temperature response of GaN HEMTs.
- Open Access
- 23 September 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 138 (12)
Super-resolution reconstruction of thermal property distributions in transient thermoreflectance
Pump–probe thermoreflectance technique encounters challenges in balancing high spatial resolution and high-throughput testing during wafer-level scanning. To address this, we introduce super-resolution reconstruction (SR), an emerging computer vision technique, into semiconductor thermophysical field characterization. By analyzing the spatial isomorphism between thermal field data and visual images, we developed a “ sparse sampling-high resolution reconstruction” framework based on a learnable SRResNet architecture, achieving 4× super-resolution reconstruction of low-resolution thermal property maps obtained through automated scanning. This method overcomes the inherent limitation of traditional point-by-point scanning measurements, which requires a time that increases with the square relationship of spatial resolution (t ∝ N2), enhancing wafer-level thermal property characterization efficiency by over 16-fold at equivalent resolution requirements. Furthermore, to resolve edge smoothing artifacts caused by SR, we developed a correction strategy incorporating transient thermoreflectance edge measurement data, significantly improving the authenticity and accuracy of thermal property distributions. This work systematically explores the application potential of SR in thermal–physical characterization, providing an efficient and rapid approach for semiconductor material analysis that effectively resolves the trade-off between testing time and spatial resolution.
- 23 September 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 138 (12)
Open AccessSuper-resolution reconstruction of thermal property distributions in transient thermoreflectance
Pump–probe thermoreflectance technique encounters challenges in balancing high spatial resolution and high-throughput testing during wafer-level scanning. To address this, we introduce super-resolution reconstruction (SR), an emerging computer vision technique, into semiconductor thermophysical field characterization. By analyzing the spatial isomorphism between thermal field data and visual images, we developed a “ sparse sampling-high resolution reconstruction” framework based on a learnable SRResNet architecture, achieving 4× super-resolution reconstruction of low-resolution thermal property maps obtained through automated scanning. This method overcomes the inherent limitation of traditional point-by-point scanning measurements, which requires a time that increases with the square relationship of spatial resolution (t ∝ N2), enhancing wafer-level thermal property characterization efficiency by over 16-fold at equivalent resolution requirements. Furthermore, to resolve edge smoothing artifacts caused by SR, we developed a correction strategy incorporating transient thermoreflectance edge measurement data, significantly improving the authenticity and accuracy of thermal property distributions. This work systematically explores the application potential of SR in thermal–physical characterization, providing an efficient and rapid approach for semiconductor material analysis that effectively resolves the trade-off between testing time and spatial resolution.
- 7 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (6) , 8648-8657
Multiwavelength Laser-Based Transient Thermoreflectance for Channel-Temperature Monitoring of GaN HEMTs
Simultaneous high-spatial and high-temporal resolution channel-temperature characterization methods are in great demand but still lacking for GaN devices. In this work, we developed a multiwavelength laser-based transient thermoreflectance technique (MWL-TTR) by using a 320-nm continuous wave (CW) laser to monitor the channel temperature and a 532-nm CW laser to monitor the metal contacts, achieving submicron spatial and nanosecond temporal resolution. The photocurrents effects induced by the above-bandgap 320 nm laser on temperature monitoring, which are used to be ignored, are quantitatively investigated and eliminated. A reliable calibration of the thermoreflectance coefficient (${C}_\text{th}$) is realized by MWL-TTR, laying the foundation of accurate channel-temperature monitoring. Based on this technique, several GaN HEMTs are measured to assess the validity of this technique.
- 7 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (6) , 8648-8657
Multiwavelength Laser-Based Transient Thermoreflectance for Channel-Temperature Monitoring of GaN HEMTs
Simultaneous high-spatial and high-temporal resolution channel-temperature characterization methods are in great demand but still lacking for GaN devices. In this work, we developed a multiwavelength laser-based transient thermoreflectance technique (MWL-TTR) by using a 320-nm continuous wave (CW) laser to monitor the channel temperature and a 532-nm CW laser to monitor the metal contacts, achieving submicron spatial and nanosecond temporal resolution. The photocurrents effects induced by the above-bandgap 320 nm laser on temperature monitoring, which are used to be ignored, are quantitatively investigated and eliminated. A reliable calibration of the thermoreflectance coefficient (${C}_\text{th}$) is realized by MWL-TTR, laying the foundation of accurate channel-temperature monitoring. Based on this technique, several GaN HEMTs are measured to assess the validity of this technique.
- 25 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 73 (00189456) , 1-9
High-Throughput Thermophysical Characterization of Semiconductors
Pump-Probe thermoreflectance (Pump-probe TR) is a non-contact detection technique that has been widely used for thermal characterization of materials. In the traditional characterization process, spot detection is usually employed to fit unknown thermal property parameters using non-linear fitting process. However, when processing a large amount of data in a specified area of a sample, the traditional measurement process appears to be time-consuming and labor-intensive. In this work, we propose a high-throughput method for semiconductor thermophysical characterization. The optical path of the measurement system is combined with automatic control components to realize automatic scanning measurements. Deep learning techniques are utilized for the high-throughput data processing. We firstly demonstrated the entire measuring process with Au-sapphire sample, whose interlayers are intentionally controlled by coating different interlayers. The validity of the method can be demonstrated by the measurement results of the thermal boundary conductance of Au-sapphire and the thermal conductivity of sapphire in the scanned area. Then, we demonstrated the application of non-destructive scanning measurement in the industrial production of GaN-on-Si sample, comparing the measurement results at different resolutions. We validate the scanning results demonstrating that this method can measure with high accuracy and speed. Meanwhile the high-resolution scanning measurement can observe the subtle difference of thermal characterization in the area. This method significantly reduces the time and labor required to measure compared to traditional method and it is particularly efficient for thermophysical characterization detection of high-volume wafers.
- 25 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 73 (00189456) , 1-9
High-Throughput Thermophysical Characterization of Semiconductors
Pump-Probe thermoreflectance (Pump-probe TR) is a non-contact detection technique that has been widely used for thermal characterization of materials. In the traditional characterization process, spot detection is usually employed to fit unknown thermal property parameters using non-linear fitting process. However, when processing a large amount of data in a specified area of a sample, the traditional measurement process appears to be time-consuming and labor-intensive. In this work, we propose a high-throughput method for semiconductor thermophysical characterization. The optical path of the measurement system is combined with automatic control components to realize automatic scanning measurements. Deep learning techniques are utilized for the high-throughput data processing. We firstly demonstrated the entire measuring process with Au-sapphire sample, whose interlayers are intentionally controlled by coating different interlayers. The validity of the method can be demonstrated by the measurement results of the thermal boundary conductance of Au-sapphire and the thermal conductivity of sapphire in the scanned area. Then, we demonstrated the application of non-destructive scanning measurement in the industrial production of GaN-on-Si sample, comparing the measurement results at different resolutions. We validate the scanning results demonstrating that this method can measure with high accuracy and speed. Meanwhile the high-resolution scanning measurement can observe the subtle difference of thermal characterization in the area. This method significantly reduces the time and labor required to measure compared to traditional method and it is particularly efficient for thermophysical characterization detection of high-volume wafers.
- Open Access
- 1 March 2024
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 135 (9)
Deep learning-based data processing method for transient thermoreflectance measurements
Pump–probe thermoreflectance has been commonly applied for characterizing the thermal properties of materials. Generally, a reliable and efficient non-linear fitting process is often implemented to extract unknown thermal parameters during the pump–probe thermoreflectance characterizations. However, when it comes to processing large amounts of data acquired from similar structural samples, non-linear fitting process appears to be very time-consuming and labor-intensive to search for the best fitting for every testing curve. Herein, we propose to apply deep learning (DL) approach to nanosecond transient thermoreflectance technique for high-throughput experimental data processing. We first investigated the effect of training set parameters (density and bounds) on the predictive performance of the DL model, providing a guidance to optimize the DL model. Then, the DL model is further verified in the measurement of the bulk sapphire, SiC, diamond samples, and GaN-based multilayer structures, demonstrating its capability of analyzing the results with high accuracy. Compared to the conventional non-linear fitting method (such as Global Optimization), the computation time of the new model is 1000 times lower. Such a data-driven DL model enables the faster inference and stronger fitting capabilities and is particularly efficient and effective in processing data acquired from wafer-level measurements with similar material structures.
- 1 March 2024
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 135 (9)
Open AccessDeep learning-based data processing method for transient thermoreflectance measurements
Pump–probe thermoreflectance has been commonly applied for characterizing the thermal properties of materials. Generally, a reliable and efficient non-linear fitting process is often implemented to extract unknown thermal parameters during the pump–probe thermoreflectance characterizations. However, when it comes to processing large amounts of data acquired from similar structural samples, non-linear fitting process appears to be very time-consuming and labor-intensive to search for the best fitting for every testing curve. Herein, we propose to apply deep learning (DL) approach to nanosecond transient thermoreflectance technique for high-throughput experimental data processing. We first investigated the effect of training set parameters (density and bounds) on the predictive performance of the DL model, providing a guidance to optimize the DL model. Then, the DL model is further verified in the measurement of the bulk sapphire, SiC, diamond samples, and GaN-based multilayer structures, demonstrating its capability of analyzing the results with high accuracy. Compared to the conventional non-linear fitting method (such as Global Optimization), the computation time of the new model is 1000 times lower. Such a data-driven DL model enables the faster inference and stronger fitting capabilities and is particularly efficient and effective in processing data acquired from wafer-level measurements with similar material structures.