Andrés Pérez-Terrazo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Andrés Pérez-Terrazo has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Martin Moreno
Laboratory of Energy Innovation and Intelligent and Sustainable Agriculture (LEIISA), Universidad Tecnológica de San Juan del Río, Av. La Palma No. 125 Vista Hermosa, San Juan del Río 76826, Querétaro, Mexico
6 shared publications - Iván Trejo-Zúñiga
Laboratory of Energy Innovation and Intelligent and Sustainable Agriculture (LEIISA), Universidad Tecnológica de San Juan del Río, Av. La Palma No. 125 Vista Hermosa, San Juan del Río 76826, Querétaro, Mexico
5 shared publications - Arturo Díaz-Ponce
CONACYT—Centro de Investigaciones en Optica, Unidad de Aguascalientes, Prol. Constitución 607, Reserva Loma Bonita, Aguascalientes 20200, Mexico
3 shared publications - José Alberto López
Laboratory of Energy Innovation and Intelligent and Sustainable Agriculture, Universidad Tecnológica de San Juan del Río, San Juan del Río 76800, Querétaro, Mexico
2 shared publications - Dulce M. Graciano
Center for Research in Engineering and Applied Sciences (CIICAp), Autonomous University of the State of Morelos, University Avenue No. 1001, Col Chamilpa, Cuernavaca 62209, Morelos, Mexico
1 shared publication - Hirohisa Kojima
Department of Aeronautics and Astronautics, Tokyo Metropolitan University, Tokyo, Japan
1 shared publication
Latest Publications
- Open Access
- 26 October 2026
- Published by MDPI AG in Computation
- Vol. 14 (11) , 263
Numerical Study of the Effects of Maximum Thickness Variations in S1046 Airfoils on the Aerodynamic Performance of an H-Darrieus Wind Turbine
Vertical-axis wind turbines (VAWTs), including H-Darrieus rotors, are attractive for small-scale applications under variable wind conditions. Although airfoil-thickness effects have been examined for conventional NACA and other S-series profiles, systematic maximum-thickness variations of the symmetric S1046 airfoil remain insufficiently documented. This study therefore evaluates a three-bladed H-Darrieus turbine using the reference S1046 airfoil and six controlled maximum-thickness variations (, , , , , and ). Transient two-dimensional URANS simulations, complemented by selected three-dimensional calculations, were performed in ANSYS Fluent 2020 R2 Fluent using the RNG k– turbulence model at a constant free-stream velocity of and tested TSR values from 0.60 to 2.25. The corresponding local relative Reynolds number varied during rotor motion, with maximum values from to over the investigated TSR range. Among the tested configurations, the thickness case produced the highest cycle-averaged power coefficient, , comparable with 0.2589 for the reference S1046 airfoil, corresponding to an increase of . The results indicate a non-monotonic thickness effect and identify as the best-performing configuration among the discrete geometries investigated. The conclusions are restricted to the tested operating conditions and the adopted URANS numerical framework.- 26 October 2026
- Published by MDPI AG in Computation
- Vol. 14 (11) , 263
Open AccessNumerical Study of the Effects of Maximum Thickness Variations in S1046 Airfoils on the Aerodynamic Performance of an H-Darrieus Wind Turbine
Vertical-axis wind turbines (VAWTs), including H-Darrieus rotors, are attractive for small-scale applications under variable wind conditions. Although airfoil-thickness effects have been examined for conventional NACA and other S-series profiles, systematic maximum-thickness variations of the symmetric S1046 airfoil remain insufficiently documented. This study therefore evaluates a three-bladed H-Darrieus turbine using the reference S1046 airfoil and six controlled maximum-thickness variations (, , , , , and ). Transient two-dimensional URANS simulations, complemented by selected three-dimensional calculations, were performed in ANSYS Fluent 2020 R2 Fluent using the RNG k– turbulence model at a constant free-stream velocity of and tested TSR values from 0.60 to 2.25. The corresponding local relative Reynolds number varied during rotor motion, with maximum values from to over the investigated TSR range. Among the tested configurations, the thickness case produced the highest cycle-averaged power coefficient, , comparable with 0.2589 for the reference S1046 airfoil, corresponding to an increase of . The results indicate a non-monotonic thickness effect and identify as the best-performing configuration among the discrete geometries investigated. The conclusions are restricted to the tested operating conditions and the adopted URANS numerical framework. - Open Access
- 19 August 2026
- Published by Elsevier in Sustainable Energy Technologies and Assessments
- Vol. 93
Experimental technology assessment of active solar-tracker control strategies: CPV yield penalties, actuator demand, and net-energy trade-offs
- 19 August 2026
- Published by Elsevier in Sustainable Energy Technologies and Assessments
- Vol. 93
Open AccessExperimental technology assessment of active solar-tracker control strategies: CPV yield penalties, actuator demand, and net-energy trade-offs
- 2 June 2026
- Published by Springer Nature
- p. 169-177
Experimental Validation of the Geometric Modifications to the Savonius Rotor for Self-Starting
- 2 June 2026
- Published by Springer Nature
- p. 169-177
Experimental Validation of the Geometric Modifications to the Savonius Rotor for Self-Starting
- Open Access
Hybridization of a Micro-Scale Savonius Rotor Using a Helical Darrieus Rotor
This study presents a micro-scale hybrid wind turbine that integrates a Savonius rotor with a Helical Darrieus rotor, aiming to enhance energy conversion efficiency and adaptability for decentralized renewable energy generation. The hybrid design leverages the high torque generation of the Savonius rotor and the aerodynamic efficiency of the Helical Darrieus rotor. Computational analyses using CFD simulations and experimental validation with a 3D-printed prototype in a closed wind tunnel were conducted at speeds ranging from 3 to 8 m/s. The results demonstrate that the hybrid turbine achieves a power coefficient of 0.26 at an optimal tip-speed ratio of 2.7, marking a 180% improvement over standalone Savonius rotors. The hybridization process mitigates the low-speed inefficiencies of the Savonius rotor. It compensates for the high-speed limitations of the Darrieus rotor, resulting in a turbine capable of operating efficiently over a wider range of wind speeds. This balanced integration maximizes energy harvesting and improves adaptability to varying wind conditions, achieving balanced and synergistic performance.
Open AccessHybridization of a Micro-Scale Savonius Rotor Using a Helical Darrieus Rotor
This study presents a micro-scale hybrid wind turbine that integrates a Savonius rotor with a Helical Darrieus rotor, aiming to enhance energy conversion efficiency and adaptability for decentralized renewable energy generation. The hybrid design leverages the high torque generation of the Savonius rotor and the aerodynamic efficiency of the Helical Darrieus rotor. Computational analyses using CFD simulations and experimental validation with a 3D-printed prototype in a closed wind tunnel were conducted at speeds ranging from 3 to 8 m/s. The results demonstrate that the hybrid turbine achieves a power coefficient of 0.26 at an optimal tip-speed ratio of 2.7, marking a 180% improvement over standalone Savonius rotors. The hybridization process mitigates the low-speed inefficiencies of the Savonius rotor. It compensates for the high-speed limitations of the Darrieus rotor, resulting in a turbine capable of operating efficiently over a wider range of wind speeds. This balanced integration maximizes energy harvesting and improves adaptability to varying wind conditions, achieving balanced and synergistic performance.
- Open Access
A Two-Stage Twisted Blade μ-Vertical Axis Wind Turbine: An Enhanced Savonius Rotor Design
Wind turbines are a solution for sustainable energy, significantly reducing carbon emissions and fostering a circular economy for more cost-effective and cleaner power generation, in line with worldwide environmental aspirations. In this context, this research aims to explore a novel two-stage, twisted-blade micro-Vertical-Axis Wind Turbine (-VAWT)alternative inspired by the Savonius Rotor (SR). This investigation utilizes the SST turbulence model to explore the power coefficient () and torque coefficient (), finding values ranging from 0.02 to 0.08 across the turbine by altering the free stream velocity (V). analysis further delves into four specific sections, highlighting areas of particular interest. These results are validated by examining velocity contours, pressure contours, and streamlines in four horizontal sections, demonstrating that the proposed turbine model exhibits minimal torque fluctuation. Moreover, the analysis of vertical wind streamlines illustrates very low interference with various wind turbine proposals, underscoring the turbine’s efficiency and potential for integration into diverse wind energy projects.Open AccessA Two-Stage Twisted Blade μ-Vertical Axis Wind Turbine: An Enhanced Savonius Rotor Design
Wind turbines are a solution for sustainable energy, significantly reducing carbon emissions and fostering a circular economy for more cost-effective and cleaner power generation, in line with worldwide environmental aspirations. In this context, this research aims to explore a novel two-stage, twisted-blade micro-Vertical-Axis Wind Turbine (-VAWT)alternative inspired by the Savonius Rotor (SR). This investigation utilizes the SST turbulence model to explore the power coefficient () and torque coefficient (), finding values ranging from 0.02 to 0.08 across the turbine by altering the free stream velocity (V). analysis further delves into four specific sections, highlighting areas of particular interest. These results are validated by examining velocity contours, pressure contours, and streamlines in four horizontal sections, demonstrating that the proposed turbine model exhibits minimal torque fluctuation. Moreover, the analysis of vertical wind streamlines illustrates very low interference with various wind turbine proposals, underscoring the turbine’s efficiency and potential for integration into diverse wind energy projects. - Open Access
- 2 March 2024
- Published by MDPI AG in Preprints.org
A Two-Stage Twisted Blade μ-Vertical Axis Wind Turbine – An Enhanced Savonius Rotor Design
Wind turbines are a solution for sustainable energy, significantly reducing carbon emissions and fostering a circular economy for more cost-effective and cleaner power generation, in line with worldwide environmental aspirations. In this context, this research aims to explore a novel Two-Stage Twisted Blade micro-Vertical Axis Wind Turbine ($\mu$-VAWT) alternative inspired by the Savonius Rotor (SR). This investigation utilizes the $\kappa-\omega$ SST turbulence model to explore the power coefficient ($C_P$) and torque coefficient ($C_T$), finding $C_P$ values ranging from 0.02 to 0.04 across the turbine by altering the free stream velocity ($V$). $C_T$ analysis further delves into four specific sections, highlighting areas of particular interest. These results are validated by examining velocity contours, pressure contours, and streamlines in four horizontal sections, demonstrating that the proposed turbine model exhibits minimal torque fluctuation. Moreover, the analysis of vertical wind streamlines illustrates very low interference with various wind turbine proposals, underscoring the turbine's efficiency and potential for integration into diverse wind energy projects.- 2 March 2024
- Published by MDPI AG in Preprints.org
Open AccessA Two-Stage Twisted Blade μ-Vertical Axis Wind Turbine – An Enhanced Savonius Rotor Design
Wind turbines are a solution for sustainable energy, significantly reducing carbon emissions and fostering a circular economy for more cost-effective and cleaner power generation, in line with worldwide environmental aspirations. In this context, this research aims to explore a novel Two-Stage Twisted Blade micro-Vertical Axis Wind Turbine ($\mu$-VAWT) alternative inspired by the Savonius Rotor (SR). This investigation utilizes the $\kappa-\omega$ SST turbulence model to explore the power coefficient ($C_P$) and torque coefficient ($C_T$), finding $C_P$ values ranging from 0.02 to 0.04 across the turbine by altering the free stream velocity ($V$). $C_T$ analysis further delves into four specific sections, highlighting areas of particular interest. These results are validated by examining velocity contours, pressure contours, and streamlines in four horizontal sections, demonstrating that the proposed turbine model exhibits minimal torque fluctuation. Moreover, the analysis of vertical wind streamlines illustrates very low interference with various wind turbine proposals, underscoring the turbine's efficiency and potential for integration into diverse wind energy projects.