Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Stefano Boscarino has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Laser Modification of Graphene Oxide for Efficient Oxygen Evolution Reaction

    by Cristiano Lo Pò, Francesco Ruffino, Simona Filice, Silvia Scalese, Maria Grazia Grimaldi, Stefano Boscarino

    The Oxygen Evolution Reaction (OER) is the bottleneck in the water splitting reaction since it involves four intermediate steps, constituting the adsorption–desorption of oxygen-based radical groups, and not all of them are energetically favorable. Rapidly growing research interest is focusing on carbon-based materials as novel, highly active and durable non-precious electrocatalysts for the OER, representing a valuable alternative to precious and rare materials with electrochemical properties tuned by defect creation. In this work, we propose a facile and green methodology based on the modification of graphene oxide by laser irradiation to obtain an alternative OER catalyst. GO flakes were chemically and physically modified using pulsed laser irradiation at 532nm with fluences of 1.5J/cm2 and 2.5J/cm2. Different analyses were carried out to correlate the electrochemical performance with the structural, optical, and morphological properties; after that, we correlated the improvements in the OER with respect to the pristine GO with the increase in OH functional groups obtained by laser treatment. The best-performing sample exhibited an overpotential of 380mV, comparable to that of catalysts reported in the literature but with the advantage of not being a precious or rare material.

  • Open Access

    Computational Approach to Fast Analysis of Electrochemical Impedance Spectroscopy

    by Cristiano Lo Pò, Stefano Boscarino, Francesco Ruffino

    Electrochemical Impedance Spectroscopy (EIS) is a widely used technique for characterizing the electrode–electrolyte interface. EIS analysis can be very complex and tedious. In this work, a fitting algorithm written in C is implemented on OriginPro software to avoid the data import/export operation and speed up the analysis. An automated fitting procedure that assigns the initial parameters is implemented for the simplest equivalent circuit. In addition, the possibility of using a custom error function is explored, with results comparable to that of reference software. The developed algorithm is tested on two different case studies.


  • Open Access

    Monte Carlo Approach to the Evaluation of Nanoparticles Size Distribution from the Analysis of UV-Vis-NIR Spectra

    by Cristiano Lo Pò, Valentina Iacono, Stefano Boscarino, Maria Grazia Grimaldi, Francesco Ruffino

    How nice would it be to obtain the size distribution of a nanoparticle dispersion fast and without electron microscope measurements? UV-Vis-NIR spectrophotometry offers a very rapid solution; however, the spectra interpretation can be very challenging and needs to take into account the size distribution of the nanoparticles and agglomeration. This work suggests a Monte Carlo method for rapid fitting UV-Vis-NIR spectra using one or two size distributions starting from a dataset of precomputed spectra based on Mie theory. The proposed algorithm is tested on copper nanoparticles produced with Pulsed Laser Ablation in Liquid and on gold nanoparticles from the literature. The fitted distribution results are comparable with Transmission Electron Microscope results and, in some cases, reflect the presence of agglomeration.


  • Open Access

    Model of Chronoamperometric Response towards Glucose Sensing by Arrays of Gold Nanostructures Obtained by Laser, Thermal and Wet Processes

    by Antonino Scandurra, Valentina Iacono, Stefano Boscarino, Silvia Scalese, Maria Grazia Grimaldi, Francesco Ruffino

    Non-enzymatic electrochemical glucose sensors are of great importance in biomedical applications, for the realization of portable diabetic testing kits and continuous glucose monitoring systems. Nanostructured materials show a number of advantages in the applications of analytical electrochemistry, compared to macroscopic electrodes, such as great sensitivity and little dependence on analyte diffusion close to the electrode–solution interface. Obtaining electrodes based on nanomaterials without using expensive lithographic techniques represents a great added value. In this paper, we modeled the chronoamperometric response towards glucose determination by four electrodes consisting of nanostructured gold onto graphene paper (GP). The nanostructures were obtained by electrochemical etch, thermal and laser processes of thin gold layer. We addressed experiments obtaining different size and shape of gold nanostructures. Electrodes have been characterized by field emission scanning electron microscopy (FE-SEM), X-ray photoelectron spectroscopy (XPS), cyclic voltammetry, and chronoamperometry. We modeled the current-time response at the potential corresponding to two-electrons oxidation process of glucose by the different nanostructured gold systems. The finest nanostructures of 10–200 nm were obtained by laser dewetting of 17 nm thin and 300 °C thermal dewetting of 8 nm thin gold layers, and they show that semi-infinite linear diffusion mechanism predominates over radial diffusion. Electrochemical etching and 17 nm thin gold layer dewetted at 400 °C consist of larger gold islands up to 1 μm. In the latter case, the current-time curves can be fitted by a two-phase exponential decay function that relies on the mixed second-order formation of adsorbed glucose intermediate followed by its first-order decay to gluconolactone.


  • Open Access

    Alkaline Electro-Sorption of Hydrogen Onto Nanoparticles of Pt, Pd, Pt80Pd20 and Cu(OH)2 Obtained by Pulsed Laser Ablation

    by Antonino Scandurra, Valentina Iacono, Stefano Boscarino, Silvia Scalese, Maria Grazia Grimaldi, Francesco Ruffino

    Recently, hydrogen evolution reaction (HER) in alkaline media has received a renewed interest both in the fundamental research as well as in practical applications. Pulsed Laser Ablation in Liquid (PLAL) has been demonstrated as a very useful technique for the unconventional preparation of nanomaterials with amazing electro-catalyst properties toward HER, compared to those of nanomaterials prepared by conventional methods. In this paper, we compared the electro-sorption properties of hydrogen in alkaline media by Pt, Pd, Pt80Pd20, and Cu(OH)2 nanoparticles (NPs) prepared by PLAL. The NPs were placed onto graphene paper (GP). Noble metal particles have an almost spherical shape, whereas Cu(OH)2 presents a flower-bud-like shape, formed by very thin nanowalls. XPS analyses of Cu(OH)2 are compatible with a high co-ordination of Cu(II) centers by OH and H2O. A thin layer of perfluorosulfone ionomer placed onto the surface of nanoparticles (NPs) enhances their distribution on the surface of graphene paper (GP), thereby improving their electro-catalytic properties. The proposed mechanisms for hydrogen evolution reaction (HER) on noble metals and Cu(OH)2 are in line with the adsorption energies of H, OH, and H2O on the surfaces of Pt, Pd, and oxidized copper. A significant spillover mechanism was observed for the noble metals when supported by graphene paper. Cu(OH)2 prepared by PLAL shows a competitive efficiency toward HER that is attributed to its high hydrophilicity which, in turn, is due to the high co-ordination of Cu(II) centers in very thin Cu(OH)2 layers by OH- and H2O. We propose the formation of an intermediate complex with water which can reduce the barrier energy of water adsorption and dissociation.


  • Open Access

    AZO Nanoparticles-Decorated CNTs for UV Light Sensing: A Structural, Chemical, and Electro-Optical Investigation

    by Simona Filice, Stefano Boscarino, Mario Scuderi, Sebania Libertino, Clelia Galati, Antonio Terrasi, Silvia Scalese

    Nanocomposites formed by aluminum-doped zinc oxide nanoparticles (AZO–NP) and multiwall carbon nanotubes (CNT) are proposed here as a promising material for UV light sensing applications, with the great advantage of operating in air, at room temperature, and at low voltage. Nanocomposite layers were prepared with different AZO:CNT weight ratios by a simple methodology at room temperature. They were characterized by means of UV–Vis spectroscopy, scanning and transmission electron microscopies (SEM and TEM), and X-ray photoelectron spectroscopy (XPS). The interaction between the two nanomaterials was demonstrated by comparing the properties of the nanocomposite with the ones shown by the AZO–NPs. Dense AZO–CNT nanocomposite layers were deposited between two metal electrodes on a SiO2/Si substrate, and the electrical properties were investigated in dark condition and under UV light irradiation. The electrical response to the UV light was a sudden current increase that reduced when the light was switched off. Several UV on/off cycles were performed, showing good repeatability and stability of the response. The mechanisms involved in the electrical response are discussed and compared to the ones previously reported for ZnO–CNT nanocomposites.


  • Open Access

    Plasmonic and Conductive Structures of TCO Films with Embedded Cu Nanoparticles

    by Stefano Boscarino, Valentina Iacono, Andrea Lo Mastro, Fiorella Tringali, Antonio Terrasi, Maria Grazia Grimaldi, Francesco Ruffino

    Cu nanoparticles were produced by using solid-state dewetting (dry) of a 1.3 nm Cu layer or laser ablation of a Cu solid target (wet) in acetone and methanol. The morphology and chemical composition of the nanoparticles were investigated as a function of the synthesis methods and their key parameters of the annealing temperature (200–500 °C) and the liquid environment during the ablation. Cu nanoparticles were then embedded in transparent conductive oxide (TCO) films as aluminum-doped zinc oxide (AZO) or zirconium-doped indium oxide (IZrO); the TCObott/Cu nanoparticle/TCOtop structures were synthesized with all combinations of AZO and IZrO as the top and bottom layers. The goal was to achieve a plasmonic and conductive structure for photovoltaic applications via a comparison of the involved methods and all fabricated structures. In particular, solid-state dewetting produced faceted or spherical (depending on the annealing temperature) nanoparticles with an average size below 150 nm while laser ablation produced spherical nanoparticles below 250 nm. Dry and wet plasmonic conductive structures as a function of the TCOs employed and the temperature of annealing could reach a sheet resistance of 86 Ω/sq. The energy band-gap Egap, absorbance, transmittance, and reflectance of the plasmonic conductive structures were investigated in the UV–vis–NIR range. They showed a dependence on the sequence of the top and bottom TCO, with best transmittances of 89.4% for the dry plasmonic conductive structure and 84.7% for the wet plasmonic conductive structure. The latter showed a higher diffused transmittance of between 10–20% in the visible range.


  • Open Access

    Morphology, Electrical and Optical Properties of Cu Nanostructures Embedded in AZO: A Comparison between Dry and Wet Methods

    by Stefano Boscarino, Maria Censabella, Melanie Micali, Marco Russo, Antonio Terrasi, Maria Grazia Grimaldi, Francesco Ruffino

    Herein, Cu nanostructures are obtained by solid-state dewetting of 9 nm copper layer (dry) or by ablating copper target, using a nanosecond pulsed laser at 1064 nm, in acetone and isopropyl alcohol (wet). The Cu nanostructures are embedded in aluminum-doped zinc oxide layer. Then, the electrical, optical, and morphological properties of the two kinds of systems, as a function of their synthesis parameters, are investigated. The aim is to compare the two fabrication methods and select the main conditions to achieve the best system for photovoltaic applications. The main differences, exhibited by the wet and dry processes, were in the shape and size of the Cu nanostructures. Dewetting in nitrogen produces faceted nanoparticles, with an average size below 150 nm, while laser ablation originates spherical and smaller nanoparticles, below 50 nm. Dry system underwent to thermal annealing, which improves the electrical properties, compared to the wet system, with a sheet resistance of 103 vs. 106 Ω/sq, respectively; finally, the dry system shows a maximum transmittance of 89.7% at 697 nm, compared to the wet system in acetone, 88.4% at 647 nm, as well as in isopropyl alcohol, 86.9% at 686 nm. Moreover, wet systems show higher transmittance in NUV.