YJYitong Ji

Yitong Ji

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yitong Ji has a total of 57 co-authors. Here are the top co-authors by number of shared publications:

  • Wenchao Huang

    Key State Laboratory of Advanced Technology for Materials Synthesis and Processing School of Materials Science and Engineering Wuhan University of Technology Wuhan China

    6 shared publications
  • Xueyuan Yang

    School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China

    5 shared publications
  • Canglang Yao

    Laboratory of Advanced Materials, Fudan University, Shanghai 200438, P. R. China

    2 shared publications
  • Jinhui Tong

    State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, China

    2 shared publications
  • Weisheng Li

    State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan 430070, P. R. China

    2 shared publications
  • Xiangda Liu

    School of Materials Science and Engineering, Wuhan University of Technology, Wuhan, 430070, China

    2 shared publications

Latest Publications

  • Open Access

    Dual-Step Solvent Vapor Annealing for Improved Morphology Control in Sequentially Deposited Organic Solar Cells

    by Mai Mao, Yuwei Hu, Lidong Liang, Tong Chen, Yitong Ji, Xueyuan Yang, Xiaoxiao You, Wenchao Huang

    Sequential deposition (SD) processing offers advantages for morphology optimization of active layer and device stability in organic solar cells (OSCs). However, the insufficient solvent resistance of polymer donor layers often leads to uncontrolled interfacial mixing. Herein, we report a dual-step solvent vapor annealing (D-SVA) strategy to address this limitation, without requiring thermal annealing, making it suitable for ultrathin flexible OSCs. Sequential chlorobenzene (CB) and carbon disulfide (CS2) vapor treatments enhance the molecular ordering and solvent resistance of the underlying donor layer, while reducing residual solvent and improving interfacial properties. As a result, the rigid SD processed OSCs achieve a power conversion efficiency (PCE) of 19.3%. Moreover, ultrathin flexible devices deliver a PCE of 17.3% with good mechanical stability. This work provides a general and scalable pathway toward high-performance and stable SD organic solar cells.


  • Top Cited Papers
    Open Access

    Defect passivation and crystallization modulation in methylammonium-free wide-bandgap perovskites for all-perovskite tandem solar cells

    by Xuefei Jia, Kaicheng Zhang, Xiaofeng Gao, Xufeng Liao, Yujie Yang, Weisheng Li, Xiaojing Lv, Xinyu Zhao, Jiali Liu, Yitong Ji, et al.

    Wide-bandgap (WBG; >1.65 electron volts) perovskites based on iodine-bromine (I-Br) mixed halides are critical components of perovskite-based tandem solar cells (TSCs). However, the uncontrolled crystallization dynamics of Br-rich species lead to reduced grain sizes and high defect densities in WBG perovskite films. Herein, a multifunctional additive 3,4,5-trifluorobenzamide (TFBZ) was introduced to enhance the crystallinity and passivate defects of the methylammonium (MA)–free WBG perovskite films. The TFBZ demonstrates superior passivation capability compared to benzamide, effectively mitigating both iodine vacancies and undercoordinated Pb 2+ defects via fluorine-enhanced interactions. In addition, the fluorine substituents in TFBZ could form N–H···F hydrogen bonds with formamidinium iodide to retard the crystallization rate of the perovskite. This proposed method is effective in defect passivation and crystal growth modulation for both 1.67– and 1.79–electron volt MA-free WBG perovskites, enabling the fabrication of MA-free all-perovskite TSCs with an encouraging power conversion efficiency of 29.01% (certified at 28.52%).


  • Open Access

    High-Performance Vacuum-Free Processed Organic Solar Cells with Gallium-Based Liquid Metal Top Electrodes

    by Rui Hu, Di Xie, Yi Jin, Xiaojie Ren, Xiang Huang, Yitong Ji, Xiaotong Liu, Xueyuan Yang, Wenchao Huang

    Conventional fabrication of high-efficiency organic solar cells (OSCs) predominantly relies on vacuum-evaporated metal top electrodes such as Ag and Al, which hinder large-scale industrial production. Gallium-based liquid metals (GaLMs), particularly the eutectic gallium–indium alloy (EGaIn), represent promising candidates to conventional vacuum-evaporated metal top electrodes due to their excellent printability and high electrical conductivity. In this study, we fabricated vacuum-free OSCs based on GaLM electrodes (Ga, EGaIn, and Galinstan) and analyzed the device performances. Rigid devices with EGaIn electrodes achieved a champion power conversion efficiency (PCE) of 15.6%. Remarkably, all-solution-processed ultrathin flexible devices employing silver nanowire (AgNW) bottom electrodes in combination with EGaIn top electrodes achieved a PCE of 13.8% while maintaining 83.4% of their initial performance after 100 compression–tension cycles (at 30% strain). This work highlights the potential of GaLMs as cost-effective, scalable, and high-performance top electrodes for next-generation flexible photovoltaic devices, paving the way for their industrial adoption.


  • Open Access

    Nitrogen-Blowing Assisted Strategy for Fabricating Large-Area Organic Solar Modules with an Efficiency of 15.6%

    by Yingying Cheng, Yitong Ji, Dongyang Zhang, Xiangda Liu, Zezhou Xia, Xiujun Liu, Xueyuan Yang, Wenchao Huang

    Organic solar cells (OSCs) are one of the most promising photovoltaic technologies due to their affordability and adaptability. However, upscaling is a critical issue that hinders the commercialization of OSCs. A significant challenge is the lack of cost-effective and facile techniques to modulate the morphology of the active layers. The slow solvent evaporation leads to an unfavorable phase separation, thus resulting in a low power conversion efficiency (PCE) of organic solar modules. Here, a nitrogen-blowing assisted method is developed to fabricate a large-area organic solar module (active area = 12 cm2) utilizing high-boiling-point solvents, achieving a PCE of 15.6%. The device fabricated with a high-boiling-point solvent produces a more uniform and smoother large-area film, and the assistance of nitrogen-blowing accelerates solvent evaporation, resulting in an optimized morphology with proper phase separation and finer aggregates. Moreover, the device fabricated by the nitrogen-blowing assisted method exhibits improved exciton dissociation, balanced carrier mobility, and reduced charge recombination. This work proposes a universal and cost-effective technique for the fabrication of high-efficiency organic solar modules.


  • A semitransparent organic solar cell with a bifacial factor of 99.1%

    by Xiangda Liu, Xiujun Liu, Zezhou Xia, Yitong Ji, Dongyang Zhang, Yingying Cheng, Xiaotong Liu, Jun Yuan, Xueyuan Yang, Wenchao Huang


  • Surface repair of wide-bandgap perovskites for high-performance all-perovskite tandem solar cells

    by Xiaojing Lv, Weisheng Li, Jin Zhang, Yujie Yang, Xuefei Jia, Yitong Ji, Qianqian Lin, Wenchao Huang, Tongle Bu, Zhiwei Ren, et al.


  • The Synthesis of Porous Aminated Starch for the Adsorption of Phenol

    by Lu Ning, Xiangda Liu, Yitong Ji, Xiaojie Ren, Rui Hu, Yi Jin, Guangyuan Yang, Xueyuan Yang

    Starch, an affordable and biodegradable polymer, is commonly used for adsorbing chemical hazards like phenol. To enhance phenol adsorption, a porous aminated starch was developed through enzymatic and chemical modification. By optimizing enzymatic reaction time and temperature, the porous starch was successfully fabricated without granule collapse, resulting in a surface area increase from 0.33 m2/g to 0.81 m2/g. Amino groups were then added to the porous starch via amination, boosting phenol adsorption capability from 0.0165 g/g in native starch to 0.0198 g/g in porous aminated starch, marking over 20% improvement. Additionally, the porous aminated starch exhibited a considerably faster adsorption rate than native starch. The porous structure provided more active sites for phenol adsorption, while the additional amino group enhanced interaction with phenol through hydrogen bonding, leading to higher phenol adsorption capability and faster rate