Yangyi Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Yangyi Zhang has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Quan Pan
Southern University of Science and Technology
11 shared publications - Xiongshi Luo
Southern University of Science and Technology
11 shared publications - Hongzhi Wu
School of Microelectronics, Southern University of Science and Technology, Shenzhen, CHINA
7 shared publications - Liping Zhong
School of Microelectronics, Southern University of Science and Technology, Shenzhen, CHINA
7 shared publications - Xuxu Cheng
Southern University of Science and Technology
7 shared publications - Zhenghao Li
School of Microelectronics, Southern University of Science and Technology, Shenzhen, CHINA
7 shared publications
Latest Publications
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 74 (11) , 9720-9735
A 0.3--10.1-GHz Hybrid Injection-Locked Multiphase Clock Generator With Operating-Range Extension and Voltage-Mismatch Cancellation in 28-nm CMOS
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 74 (11) , 9720-9735
A 0.3--10.1-GHz Hybrid Injection-Locked Multiphase Clock Generator With Operating-Range Extension and Voltage-Mismatch Cancellation in 28-nm CMOS
- 24 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. PP (00189200) , 1-10
A 4 × 224 Gb/s Single-Ended PAM-4 Transceiver Front-End With Noise Suppression Technique and Cascaded Equalizers in 130-nm SiGe BiCMOS
A dc-coupled analog single-ended (SE) transceiver (TRX) front-end supporting 224 Gb/s/lane is presented. It features SE-to-differential (S2D) and differential-to-SE (D2S) conversion, power-efficient broadband analog equalization, and noise suppression. Both the transmitter and receiver front-ends adopt pseudodifferential structures with dual-loop regulators to achieve a high power supply rejection ratio (PSRR). A power bounce canceller (PBC) is proposed for the S2D to reduce the power bounce noise by 76% and improve the eye width (EW) by 12%. Moreover, cascaded continuous-time linear equalizers (CTLEs) with emitter degradation, distributed-peaking technique, and a feedforward low-pass branch are employed to enable low-/medium-/high-frequency equalization, supporting up to 29 dB loss compensation. Fabricated in 130-nm SiGe BiCMOS, the proposed SE TRX front-end demonstrates a data rate of 224 Gb/s PAM-4 with an energy efficiency of 2.08 pJ/b and an FoM of 0.07 pJ/b/dB. To the best of the author’s knowledge, this work is the first SE TRX front-end operating at 224 Gb/s PAM-4.
- 24 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. PP (00189200) , 1-10
A 4 × 224 Gb/s Single-Ended PAM-4 Transceiver Front-End With Noise Suppression Technique and Cascaded Equalizers in 130-nm SiGe BiCMOS
A dc-coupled analog single-ended (SE) transceiver (TRX) front-end supporting 224 Gb/s/lane is presented. It features SE-to-differential (S2D) and differential-to-SE (D2S) conversion, power-efficient broadband analog equalization, and noise suppression. Both the transmitter and receiver front-ends adopt pseudodifferential structures with dual-loop regulators to achieve a high power supply rejection ratio (PSRR). A power bounce canceller (PBC) is proposed for the S2D to reduce the power bounce noise by 76% and improve the eye width (EW) by 12%. Moreover, cascaded continuous-time linear equalizers (CTLEs) with emitter degradation, distributed-peaking technique, and a feedforward low-pass branch are employed to enable low-/medium-/high-frequency equalization, supporting up to 29 dB loss compensation. Fabricated in 130-nm SiGe BiCMOS, the proposed SE TRX front-end demonstrates a data rate of 224 Gb/s PAM-4 with an energy efficiency of 2.08 pJ/b and an FoM of 0.07 pJ/b/dB. To the best of the author’s knowledge, this work is the first SE TRX front-end operating at 224 Gb/s PAM-4.
- 11 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 61 (6) , 2787-2797
A 112-Gb/s Single-Ended Receiver Front-End With Multi-Order Crosstalk Cancellation and Signal Reutilization Technique in 28-nm CMOS
This article presents a 112-Gb/s single-ended four-level pulse-amplitude modulation (PAM-4) receiver (RX) front-end using multi-order crosstalk cancellation and signal reutilization (M-XTCR) technique for backplane links. In single-ended links, far-end crosstalk (FEXT) noise is eliminated to maintain high signal integrity (SI). However, since the FEXT does not follow the ideal derivative model at higher frequencies, the previous method thus cannot eliminate it well. To address this issue, this article introduces an $N$ th-order FEXT model, which accurately represents the real FEXT at higher frequencies. An M-XTCR technique based on this model is proposed to minimize residual FEXT and enhance the ability of high-frequency signal reutilization. Fabricated in 28-nm CMOS, the second-order XTCR topology is adopted in this RX front-end to verify the M-XTCR technique with a 4-in and 33-dB signal-to-crosstalk ratio (SCR) channel. Compared to the conventional first-XTCR, this RX front-end with second-XTCR technique improves measured horizontal and vertical eye-openings by 21% and 34% for 56-Gb/s NRZ; and 24% and 18% for 112-Gb/s PAM4, respectively. The result corresponds to the best energy efficiency of 0.34 pJ/b, which compares favorably with the state of the art.
- 11 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 61 (6) , 2787-2797
A 112-Gb/s Single-Ended Receiver Front-End With Multi-Order Crosstalk Cancellation and Signal Reutilization Technique in 28-nm CMOS
This article presents a 112-Gb/s single-ended four-level pulse-amplitude modulation (PAM-4) receiver (RX) front-end using multi-order crosstalk cancellation and signal reutilization (M-XTCR) technique for backplane links. In single-ended links, far-end crosstalk (FEXT) noise is eliminated to maintain high signal integrity (SI). However, since the FEXT does not follow the ideal derivative model at higher frequencies, the previous method thus cannot eliminate it well. To address this issue, this article introduces an $N$ th-order FEXT model, which accurately represents the real FEXT at higher frequencies. An M-XTCR technique based on this model is proposed to minimize residual FEXT and enhance the ability of high-frequency signal reutilization. Fabricated in 28-nm CMOS, the second-order XTCR topology is adopted in this RX front-end to verify the M-XTCR technique with a 4-in and 33-dB signal-to-crosstalk ratio (SCR) channel. Compared to the conventional first-XTCR, this RX front-end with second-XTCR technique improves measured horizontal and vertical eye-openings by 21% and 34% for 56-Gb/s NRZ; and 24% and 18% for 112-Gb/s PAM4, respectively. The result corresponds to the best energy efficiency of 0.34 pJ/b, which compares favorably with the state of the art.
- 29 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 73 (1) , 126-139
A 2 × 80 Gb/s Single-Ended TAS-TIS PAM-4 Receiver Front-End With Crosstalk Cancellation and Signal Reutilization in 28-nm CMOS
This paper presents a $2\times 80$ Gb/s single-ended trans-admittance trans-impedance (TAS-TIS) 4-level pulse amplitude modulation (PAM-4) receiver with crosstalk cancellation and signal reutilization technique in 28-nm CMOS. Based on the TAS-TIS architecture, to achieve a precise cancellation of the far-end crosstalk, a common mode gain rejection methodology is proposed in the balanced differentiator, ensuring low gain mismatch and low phase skew. Moreover, the proposed Gm-doubler technique in the TAS-TIS architecture enhances the gain of the adder under limited supply voltage conditions. By employing the series peaking combined with an active inductor in the adder, the bandwidth of adder is improved by a factor of 2.2, and the group delay variation is effectively optimized by 65%. The proposed current-mirror-based continuous-time linear equalizer (CTLE) provides high-frequency and low-frequency compensation with 25% power saving. Overall, the measurement results of the proposed receiver demonstrate $2\times 80$ Gb/s PAM-4 eyes with an efficiency of 0.83 pJ/bit/lane and $2\times 56$ Gb/s non-return-to zero (NRZ) eyes over a pair of PCB traces with 13 dB loss at 20 GHz and 28 dB loss at 28 GHz, respectively.
- 29 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 73 (1) , 126-139
A 2 × 80 Gb/s Single-Ended TAS-TIS PAM-4 Receiver Front-End With Crosstalk Cancellation and Signal Reutilization in 28-nm CMOS
This paper presents a $2\times 80$ Gb/s single-ended trans-admittance trans-impedance (TAS-TIS) 4-level pulse amplitude modulation (PAM-4) receiver with crosstalk cancellation and signal reutilization technique in 28-nm CMOS. Based on the TAS-TIS architecture, to achieve a precise cancellation of the far-end crosstalk, a common mode gain rejection methodology is proposed in the balanced differentiator, ensuring low gain mismatch and low phase skew. Moreover, the proposed Gm-doubler technique in the TAS-TIS architecture enhances the gain of the adder under limited supply voltage conditions. By employing the series peaking combined with an active inductor in the adder, the bandwidth of adder is improved by a factor of 2.2, and the group delay variation is effectively optimized by 65%. The proposed current-mirror-based continuous-time linear equalizer (CTLE) provides high-frequency and low-frequency compensation with 25% power saving. Overall, the measurement results of the proposed receiver demonstrate $2\times 80$ Gb/s PAM-4 eyes with an efficiency of 0.83 pJ/bit/lane and $2\times 56$ Gb/s non-return-to zero (NRZ) eyes over a pair of PCB traces with 13 dB loss at 20 GHz and 28 dB loss at 28 GHz, respectively.
- 10 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 72 (12) , 7681-7692
A 112-Gb/s Single-Ended PAM-4 Transceiver Front-End for Reach Extension in Long-Reach Link
A 112-Gb/s single-ended (SE) four-level pulse amplitude modulation (PAM-4) transceiver front-end for the reach-extension module in long-reach (LR) link is proposed. The receiver front-end features an SE-to-differential (S2D) amplifier and a continuous-time linear equalizer (CTLE). Asymmetric inductive peaking, compensation capacitance, and current blending techniques are employed in S2D to eliminate the mismatch at the pseudo-differential outputs. A compact and peaking-enhanced CTLE is achieved by the inductor reused technique. The transmitter front-end is based on a differential-to-SE (D2S) driver where the negative capacitance technique is proposed to extend its bandwidth. Fabricated in 130-nm SiGe BiCMOS technology, our SE transceiver front-end demonstrates a data rate of 112-Gb/s PAM-4 at a 20-dB channel loss with an FoM of 0.09 pJ/bit/dB and BER of $3.21e$ -4.
- 10 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 72 (12) , 7681-7692
A 112-Gb/s Single-Ended PAM-4 Transceiver Front-End for Reach Extension in Long-Reach Link
A 112-Gb/s single-ended (SE) four-level pulse amplitude modulation (PAM-4) transceiver front-end for the reach-extension module in long-reach (LR) link is proposed. The receiver front-end features an SE-to-differential (S2D) amplifier and a continuous-time linear equalizer (CTLE). Asymmetric inductive peaking, compensation capacitance, and current blending techniques are employed in S2D to eliminate the mismatch at the pseudo-differential outputs. A compact and peaking-enhanced CTLE is achieved by the inductor reused technique. The transmitter front-end is based on a differential-to-SE (D2S) driver where the negative capacitance technique is proposed to extend its bandwidth. Fabricated in 130-nm SiGe BiCMOS technology, our SE transceiver front-end demonstrates a data rate of 112-Gb/s PAM-4 at a 20-dB channel loss with an FoM of 0.09 pJ/bit/dB and BER of $3.21e$ -4.
- 16 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 61 (1) , 293-304
A 128-Gb/s PAM-4 Transmitter With Edge-Boosting Pulse Generator and Pre-Emphasis Asymmetric Fractional-Spaced FFE in 28-nm CMOS
This article presents a 128-Gb/s current-mode four-level pulse amplitude modulation (PAM-4) transmitter (TX) with a pre-emphasis asymmetric fractional-spaced feed-forward equalizer (AFS-FFE) and an edge-boosting pulse generator. The proposed pre-emphasis AFS-FFE mitigates unequal switching jitter (SWJ) in PAM-4 eyes, extending the minimum eye width by 67%. Additionally, the reconfigurable UI-spaced feed-forward equalizer (FFE) enhances the precision of the equalizer. The edge-boosting pulse generator accelerates the edge-transition speed of the driver’s output signal, increasing the TX’s bandwidth by 26%. Moreover, in the data path, the latch-minimized serializer eliminates 4:1 MUX input-side latches, thereby reducing the power consumption of the TX data path by 36%. Fabricated in a 28-nm CMOS process, measurement results show that the PAM-4 TX can operate in both PAM-4 and non-return-to-zero (NRZ) modes, achieving a maximum data rate of 128 Gb/s with an energy efficiency of 1.5 pJ/bit.
- 16 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 61 (1) , 293-304
A 128-Gb/s PAM-4 Transmitter With Edge-Boosting Pulse Generator and Pre-Emphasis Asymmetric Fractional-Spaced FFE in 28-nm CMOS
This article presents a 128-Gb/s current-mode four-level pulse amplitude modulation (PAM-4) transmitter (TX) with a pre-emphasis asymmetric fractional-spaced feed-forward equalizer (AFS-FFE) and an edge-boosting pulse generator. The proposed pre-emphasis AFS-FFE mitigates unequal switching jitter (SWJ) in PAM-4 eyes, extending the minimum eye width by 67%. Additionally, the reconfigurable UI-spaced feed-forward equalizer (FFE) enhances the precision of the equalizer. The edge-boosting pulse generator accelerates the edge-transition speed of the driver’s output signal, increasing the TX’s bandwidth by 26%. Moreover, in the data path, the latch-minimized serializer eliminates 4:1 MUX input-side latches, thereby reducing the power consumption of the TX data path by 36%. Fabricated in a 28-nm CMOS process, measurement results show that the PAM-4 TX can operate in both PAM-4 and non-return-to-zero (NRZ) modes, achieving a maximum data rate of 128 Gb/s with an energy efficiency of 1.5 pJ/bit.
- 28 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 60 (7) , 2632-2644
A 2 × 112 Gb/s/pin Single-Ended Crosstalk Cancellation Transceiver With 31-dB Loss Compensation in 28-nm CMOS
This article presents a 112-Gb/s/pin single-ended four-level pulse-amplitude modulation (PAM-4) crosstalk cancellation (XTC) transceiver (TRX) designed to support data rates of up to 224 Gb/s through a pair of differential channels. The receiver (RX) employs a mismatch-mitigation single-ended-to-differential (S2D) converter for minimizing pseudo-differential mismatch. A four-tap feed-forward equalizer (FFE) using a multi-phase clock (MPC) technique is proposed to compensate for pre-and post-cursor inter-symbol interference (ISI) noise with low power consumption. The transmitter (TX) reconfigurable XTC technique is adopted to cancel mild crosstalk noise flexibly, while the multiple-input–multiple-output (MIMO)-XTC technique in the RX is used to eliminate severe inductive crosstalk noise robustly. Fabricated in 28-nm CMOS, the TRX achieves a bit error rate (BER) of $<$ 10 $^{-10}$ at 112-Gb/s PAM-4 transmission with a channel loss of 31 dB at the Nyquist frequency and an energy efficiency of 2.77 pJ/b.
- 28 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 60 (7) , 2632-2644
A 2 × 112 Gb/s/pin Single-Ended Crosstalk Cancellation Transceiver With 31-dB Loss Compensation in 28-nm CMOS
This article presents a 112-Gb/s/pin single-ended four-level pulse-amplitude modulation (PAM-4) crosstalk cancellation (XTC) transceiver (TRX) designed to support data rates of up to 224 Gb/s through a pair of differential channels. The receiver (RX) employs a mismatch-mitigation single-ended-to-differential (S2D) converter for minimizing pseudo-differential mismatch. A four-tap feed-forward equalizer (FFE) using a multi-phase clock (MPC) technique is proposed to compensate for pre-and post-cursor inter-symbol interference (ISI) noise with low power consumption. The transmitter (TX) reconfigurable XTC technique is adopted to cancel mild crosstalk noise flexibly, while the multiple-input–multiple-output (MIMO)-XTC technique in the RX is used to eliminate severe inductive crosstalk noise robustly. Fabricated in 28-nm CMOS, the TRX achieves a bit error rate (BER) of $<$ 10 $^{-10}$ at 112-Gb/s PAM-4 transmission with a channel loss of 31 dB at the Nyquist frequency and an energy efficiency of 2.77 pJ/b.
- 16 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 59 (9) , 3008-3020
A 2×56 Gb/s 0.78-pJ/b PAM-4 Crosstalk Cancellation Receiver With Active Crosstalk Extraction Technique in 28-nm CMOS
A $2\times56$ Gb/s 0.78-pJ/b four pulse-amplitude modulation (PAM-4) single-ended multiple-input multiple-output (MIMO) crosstalk cancellation and signal reutilization (XTCR) receiver (RX) is investigated for medium-reach (MR) backplane communications. An XTCR scheme based on active crosstalk extraction (A-XTCR) is proposed to improve the signal reutilization efficiency of the RX. By adopting the proposed asymmetric-inductor current-mode logic (CML) single-ended-to-differential (S2D) converter, the pseudo-differential output mismatch is alleviated. Fabricated in 28-nm CMOS, the RX achieves a bit error rate (BER) of $< 1\text{e}\,\,-10$ at 56-Gb/s PAM-4 transmission with a channel of 24-dB Nyquist loss. Compared with the XTCR based on the conventional passive crosstalk extraction (P-XTCR), the proposed A-XTCR technique has improved vertical and horizontal eye openings of the RX by 24% and 15% at 56-Gb/s PAM-4, respectively. The result corresponds to the best energy efficiency of 0.78 pJ/b/lane, which compares favorably with the state of the art.
- 16 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 59 (9) , 3008-3020
A 2×56 Gb/s 0.78-pJ/b PAM-4 Crosstalk Cancellation Receiver With Active Crosstalk Extraction Technique in 28-nm CMOS
A $2\times56$ Gb/s 0.78-pJ/b four pulse-amplitude modulation (PAM-4) single-ended multiple-input multiple-output (MIMO) crosstalk cancellation and signal reutilization (XTCR) receiver (RX) is investigated for medium-reach (MR) backplane communications. An XTCR scheme based on active crosstalk extraction (A-XTCR) is proposed to improve the signal reutilization efficiency of the RX. By adopting the proposed asymmetric-inductor current-mode logic (CML) single-ended-to-differential (S2D) converter, the pseudo-differential output mismatch is alleviated. Fabricated in 28-nm CMOS, the RX achieves a bit error rate (BER) of $< 1\text{e}\,\,-10$ at 56-Gb/s PAM-4 transmission with a channel of 24-dB Nyquist loss. Compared with the XTCR based on the conventional passive crosstalk extraction (P-XTCR), the proposed A-XTCR technique has improved vertical and horizontal eye openings of the RX by 24% and 15% at 56-Gb/s PAM-4, respectively. The result corresponds to the best energy efficiency of 0.78 pJ/b/lane, which compares favorably with the state of the art.