Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jeanette Pao has a total of 37 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Hyperautomated Hazard Mitigation Using Integrated, Scalable, and Sustainable Robotics and UAV Systems

    by Ronnie Concepcion, Jeanette Pao, Rhen Anjerome Bedruz, Ronnel Agulto, Jared Jan Abayan, Edza Aria Wikurendra

    Natural and anthropogenic disasters are rising in frequency and severity, and reactive, single-technology response models are now the principal bottleneck in safeguarding planetary health. This article develops Hyperautomated Hazard Mitigation (HHM), in which robots, unmanned aerial vehicles (UAVs), and artificial intelligence (AI) services operate as one integrated, self-optimizing system rather than as isolated tools. Hazard mitigation is treated as a specific resilience behavior of a multi-agent engineering system, building on established proactive-resilience theory rather than presenting that framing as new. This framework-oriented review synthesizes evidence and proposes an architecture. It reports no new experimental validation. It maps hazard-mitigation functions onto the six layers of the Reference Architectural Model Industrie 4.0 (RAMI 4.0) with the standards and interfaces that realize each layer; classifies robotic and UAV functions across natural and anthropogenic hazards using one set of four capability classes; expresses ethical and regulatory requirements as quantified engineering constraints; operationalizes health- centered evaluation metrics; and appraises the maturity of the evidence in each hazard domain. It concludes that the architecture is tractable with existing standards, that the actuation stage is the least mature and least evaluated, and that the decisive gap is evaluative: the field has no shared benchmark and rarely reports health outcomes.

  • Open Access

    Design and Development of Web-Based 3D Point Cloud Scanner System for Flour Storage Bin Volumetric Measurement

    by Jaafar Omar, Jeanette Pao, Melody Mae Maluya, Immanuel Paradela, Earl Ryan Aleluya, Francis Jann Alagon, Ronnie Concepcion, Carl John Salaan

    Adequate monitoring of flour storage bins in the food manufacturing industry can prevent profit loss from underproduction and overstocking. Manual volume measurement is labor-intensive and error-prone. With the need for efficient monitoring in mind, this study presents the design and development of volumetric measurement of the flour inside a storage bin using 2D-based rotating LiDAR to capture 3D point cloud data. The proposed system eliminates manual probing by fully automating the scanning and volumetric computation workflow. Instead of relying on discrete physical measurements inside the bin, the 2D rotating LiDAR continuously captures the interior walls and flour surface to generate a dense 3D point cloud. This removes the need for operators to insert rods or probes and thereby avoids human-induced measurement variability. Furthermore, because the system computes flour volume directly from geometric reconstruction rather than converting probe depths using a uniform surface assumption, it does not rely on a constant material density and is therefore more robust to compaction differences within the bin. The high-resolution point cloud also generates accurate mapping of non-uniform and irregular surface geometries, which captures true depressions, peaks, and sloped regions that manual methods typically miss. A dedicated web application was developed to send commands to the system for automated scanning and real-time volume computation. Successful real-world testing showed the system’s reliability, with an accuracy level of 1.013 ± 0.70% MAPE across varied flour quantities and surface contours.

  • Open Access

    Visual Servoing Drone Utilizing Ground Robot Detection Model for UAV-UGV Alignment for Retrieval Operations

    by Jamaica Mae Pepito, John Mel Bolaybolay, Earl Ryan Aleluya, Francis Jann Alagon, Steve Clar, Immanuel Paradela, Sherwin Guirnaldo, Jeanette Pao, Carl John Salaan, Argel Bandala

    Hazardous and remote environments, such as volcanic regions and disaster zones, require regular monitoring due to the significant risks they pose. Innovative solutions like aerial and mobile robots offer safer monitoring options, though drones are limited by short battery life, and mobile robots face mobility challenges. Collaborative aerial-ground robots have been developed to address these issues, with drones transporting and recovering ground robots. Deploying the ground robot is easy, but its recovery is challenging due to drone Global Positioning System (GPS) inaccuracies. It highlights the need for a precise visual alignment technique. This study utilized YOLOv8n segmentation model to develop a ground robot detection model. The development involved gathering images of ground robots in various environmental settings such as rocks, seashores, sand, grasslands, limestone, and soil. Three models were tested in this study: plate detection, ground robot detection, and a combined plate and ground robot detection model. The ground robot detection model emerged as the most robust, achieving an F1 score of 99.7% and an mAP of 95.4% at 0.5 to 0.96 IoU thresholds. The model was integrated into a small computer on a visual servoing drone and tested outdoors. The alignment threshold was set at 65 cm, based on the size of the retrieval mechanism. The experiments indicate that the drone achieved an average alignment error of 41.985 cm within 7.82 seconds. The experimental results exhibit the effectiveness of the UAV-UGV alignment for the retrieval task in hazardous and remote areas.


  • Autonomous Drone-Ground Robot Alignment Through Ground Robot Visual Servo Control With Drone Detection and Tilt Correction

    by Sean Clark Dominguez, Jeanette Pao, Immanuel Paradela, John Mel Bolaybolay, Earl Ryan Aleluya, Francis Jann Alagon, Sherwin Guirnaldo, Carl John Salaan, Kazunori Ohno, Yoshito Okada, et al.

    Retrieving ground robots from dangerous environments after their operation is a challenging task that poses risks for the personnel. Some researchers often employ drones for retrieval, which makes operations safer. However, this set-up requires an accurate method that guarantees drone and ground robot alignment due to inaccuracies in standard GPS devices, drone drifts, and wind gusts. Hence, this research article introduces simultaneous object detection and tilt correction as part of visual servoing to achieve precise drone-rover alignment. Drone detection using YOLOv8 and a tilt correction algorithm was integrated for the proposed visual servo of the ground robot. The study collected 3024 images as a data set for drone detection. The experimental results show that the trained instance segmentation model detected and captured drone objects. The study conducted an initial test for visual servo control of the ground robot in various surface terrains, resulting in a maximum alignment error on rough surfaces. Furthermore, the study conducted drone-ground robot alignment real test in an outdoor field setting. The alignment between the drone and the ground robot produced a maximum alignment error of 20.3 cm, below the threshold error. The open field experiments verified the effectiveness of the ground robot's visual servo control with an actual drone operation.


  • Open Access

    Drone-Based Automatic Water Sampling System

    by Irish Mae G. Lariosa, Jeanette C. Pao, Charles Alver G. Banglos, Immanuel P. Paradela, Earl Ryan M. Aleluya, Carl John O. Salaan, Chinthaka N. Premachandra

    Water sampling is a fundamental practice for obtaining essential environmental data, enabling the analysis and quality testing of water from natural or industrial sources. It plays a vital role in understanding water quality changes over time, identifying contaminant sources, and supporting water management plans. Traditional sampling methods, including spot (bottle) sampling and in-situ readings, can be labor-intensive and limited by accessibility. To address these challenges, the utilization of drones equipped with specialized sensors and sampling devices has emerged as an innovative and efficient approach. Drones offer the potential to automate field quality control and streamline water sampling efforts, providing a cost-effective and comprehensive solution for data collection in diverse water environments. This paper focuses on the design and development of a water sampling system integrated with a drone, featuring an automatic lock mechanism activated after rigorous field quality control, ensuring the reliable collection of water samples in various scenarios.


  • ToF-based Simultaneous Localization and Mapping using a Shelled-UAV for Penstock Applications

    by Jared Jan Abayan, Charles Alver Banglos, Lester Librado, Jeanette Pao, Carl John Salaan

    Inspection of penstocks have posed a great threat to human personnel as it can be hazardous while doing manual inspections. In recent years, there is a rise in popularity in the use of Unmanned Aerial Vehicles (UAVs) for several applications including infrastructure inspection since it can help ease the risk of human accidents in doing such operations. With the addition of a shell to the UAV, it has been proven to be an efficient and effective way for the visual inspection of infrastructures and other related applications. In this paper, the concept of Simultaneous Localization and Mapping (SLAM) has been implemented to the system for the inspection of hydroelectric power plant penstocks by utilizing multiple state of the art Time-of-Flight (ToF) LiDAR sensors and an Inertial Measurement Unit (IMU) for the mapping and positioning of the shelled UAV inside the infrastructure. The experimental data obtained after conducting a test flight inside a mock-up penstock has been analyzed and interpreted to verify if the generated map is precise and accurate. With the proper positioning of the system and the correct map of the penstock, this innovation bestows a great breakthrough in visual inspection of infrastructures specifically the inspection of penstocks.


  • Meshing and Insulation Strategies for Shelled UAVs in Proximal Inspection of Distribution Utility Lines

    by Lester G. Librado, Christian Y. Cahig, Charles Alver G. Banglos, Jeanette C. Pao, Carl John O. Salaan

    Aerial robotics brought breakthroughs in inspection across various industries. Power utilities recently adopted drone technologies for visual inspection of their assets. In the cluttered environments of distribution-level networks, shelled drones can offer proximal inspection albeit getting in contact with different objects—something that discourages the use of regular drones. However, the available shell designs are yet to account for two environmental factors when implemented in a power distribution network. First, relatively smaller objects ( e.g. , transformer bushings) pose a risk of intrusion through the shell. Second, the shell may cause unwanted current flows ( e.g. , arcing and faults). In this study, meshing and insulating strategies for an existing C ${^{6}0}$ shell design were introduced. Specifically, the modifications introduced are (i) by weaving a nylon mono-line mesh around the shell to improve its strength and increase the chance of blocking external objects, and (ii) by coating the shell with insulation to prevent the shell from conducting electricity. It is observed that meshing significantly reduces entry areas for external objects. The experiments also confirm the significant improvement in strength due to meshing while incurring a minimal increase in the shell’s weight. The effectiveness of the insulation cover is also verified through an insulation test. To verify the performance of the proposed strategies, a prototype shelled UAV unit is developed and is used in the aerial inspection of a simulated pole-mounted transformer.


  • Aerodynamic Analysis and Vibration Response of Spherical Shell with Meshed Net for Unmanned Aerial Vehicle Application

    by Jeanette Pao, Charles Alver Banglos, Karl Martin Aldueso, Carl John Salaan, Jonathan Maglasang

    Shelled unmanned aerial vehicle (UAV) has proven to be efficient and effective in visually inspecting wide varieties of structure types in challenging locations including narrow or complex environments. In bridge inspection, shelled UAVs can encounter another problem considering the outdoor environment such as the presence of wind. Improving the flight performance by reducing the overall drag means decreasing the overall area of shell as well. However, this could danger the UAV because of the larger openings of the shell. Prospect solution is the additional protection of the spherical shell by adding meshed net. In this study, the aerodynamic characteristics of the fullerene type spherical shell with meshed net was investigated at different wind speeds and sideslip angles. Moreover, in the presence of wind, the spherical shell with and without meshed net will experience significant vibrations that will also affect the flight performance of UAV due to the combination of the wind load and its material structure. Thus, the vibration response was also investigated at different wind speeds. For the aerodynamic investigation, computational fluid dynamic (CFD) simulations and wind tunnel experiments were conducted to determine the performance of the shelled UAV with and without meshed net. The contribution of drag force by the spherical shell increased by an average of 3.95. For vibration response, a wind tunnel test was performed. Experimental data at different wind speeds were extracted and analysed via the MATLAB vibration toolbox. Based on the evaluation on the frequency-response, the spherical shell with multifilament fishing line mesh indicated higher amplitude value compared to the spherical shell with monofilament nylon mesh.