Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Aleksandr Šabanovič has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Modeling the Interaction of Pulsed EHD Forces and Aerodynamic Shielding on Sub-Micron Particles

    by Aleksandr Šabanovič, Jonas Matijošius, Piotr Jaskowski

    Electrohydrodynamic (EHD) actuators offer a promising approach for active particulate matter (PM) control in heavy-duty and marine exhaust systems. However, continuous DC corona discharge often leads to excessive energy consumption and is susceptible to aerodynamic re-entrainment in high-velocity flows. This study introduces an idealized transient advection mechanism combining a macroscopic corrugated duct geometry with high-frequency pulsed EHD actuation. A fully coupled, time-dependent multiphysics model—integrating RANS turbulent flow, Poisson-Nernst-Planck space charge transport, and Lagrangian discrete particle tracing—was developed to analyze the physical kinetics of 0.2 µm soot particles. The results demonstrate that the corrugation troughs act as effective aerodynamic dead zones with partial electrostatic shielding, creating aerodynamic and electrostatic dead zones. During active microsecond voltage pulses (25 kV peak), intense Coulombic forces rapidly overcome turbulent drag, driving kinetic injection of particles into the corrugation troughs. During the resting phase, particles remain securely trapped by aerodynamic shielding, significantly mitigating the risk of aerodynamic re-entrainment under the simulated conditions. A comprehensive parametric analysis revealed that an optimized 500 Hz pulse with a 5% duty cycle maintains a robust 82.7% trapping efficiency. Compared to standard continuous DC precipitators, this pulsed actuation strategy requires an idealized active corona power of 15.3 mW. This study provides fundamental physical insights into transient EHD flows and establishes optimized design criteria for fundamental EHD transport models.

  • Open Access

    Effect of Duct Inclination and Acoustic–Electrostatic Hybridization on Particle Removal in Low-Velocity Airflows: Experimental Analysis

    by Aleksandr Šabanovič, Darius Vainorius, Jonas Matijošius, Artūras Kilikevičius, Benas Rimša

    This study examined how duct inclination influences particle removal in a hybrid acoustic–electrostatic filtration system operating at low airflow velocities. The experiments were carried out in a 150 mm diameter air duct at airflow speeds of 0.50 and 0.75 m/s, with duct inclinations of 45° and 90°. Aerosol particles with properties similar to marine diesel exhaust, spanning a size range of 0.2–10 µm, were introduced at stable concentrations. Electrostatic voltages of 17.5 and 20 kV were applied, together with acoustic voltages between 100 and 200 V. Particle removal was evaluated using both size-resolved and overall collection efficiencies. The results show that duct inclination mainly affects the removal of fine and medium-sized particles. The largest differences were observed for particles around 1 µm in diameter, where the vertical duct increased collection efficiency by up to 27 percentage points at an airflow speed of 0.75 m/s. For larger particles in the 5–10 µm size range, high removal efficiency was achieved under all tested conditions, and duct orientation had a smaller influence on collection performance. Overall, the results confirm that duct inclination has a clear and measurable effect on the performance of hybrid acoustic–electrostatic filtration systems operating at low airflow velocities.

  • Open Access

    Numerical Prediction of Cold Plasma Electrostatic Precipitation in Corrugated Marine Exhaust Ducts

    by Aleksandr Šabanovič, Jonas Matijošius

    Marine diesel engines generate high concentrations of sub-micron particulate matter (PM) that requires effective exhaust aftertreatment. While conventional wire-in-tube electrostatic precipitators (ESP) offer a low-drag solution, their practical efficiency is limited by particle re-entrainment at elevated flow velocities. This study investigates a novel application of corrugated cylindrical ducts—standard vibration-compensating couplings—as electrostatic collectors. A fully coupled two-dimensional axisymmetric COMSOL Multiphysics 6.4 model was developed, integrating turbulent flow (k–ε), electrostatics, ion charge transport, and particle tracing. Numerical results demonstrate that while smooth and corrugated geometries yield identical theoretical Deutsch–Anderson efficiency (61.1% at Uin = 0.5 m/s, the corrugated profile significantly suppresses re-entrainment. The corrugations reduce wall shear stress by a factor of 7.7 to 13.5 at flow velocities of 0.3–0.8 m/s, maintaining aerodynamic conditions below critical particle detachment thresholds. With a pressure drop penalty representing less than 6% of the localized corona power, these findings show that existing marine exhaust infrastructure can be repurposed as high-efficiency, low-re-entrainment particle collectors through the integration of cold plasma electrodes.


  • Open Access

    Numerical Prediction of Cold Plasma Electrostatic Precipitation in Corrugated Marine Exhaust Ducts

    by Aleksandr Šabanovič, Jonas Matijošius

    Marine diesel engines generate high concentrations of sub-micron particulate matter (PM) that requires effective exhaust aftertreatment. While conventional wire-in-tube electrostatic precipitators (ESP) offer a low-drag solution, their practical efficiency is limited by particle re-entrainment at elevated flow velocities. This study investigates a novel application of corrugated cylindrical ducts—standard vibration-compensating couplings—as electrostatic collectors. A fully coupled two-dimensional axisymmetric COMSOL Multiphysics model was developed, integrating turbulent flow (k–ε), electrostatics, ion charge transport, and particle tracing. Numerical results demonstrate that while smooth and corrugated geometries yield identical theoretical Deutsch–Anderson efficiency (61.1% at Uin = 0.5 m/s, the corrugated profile significantly suppresses re-entrainment. The corrugations reduce wall shear stress by a factor of 7.7 to 13.5 at flow velocities of 0.3–0.8 m/s, maintaining aerodynamic conditions below critical particle detachment thresholds. With a pressure drop penalty representing less than 6% of the localized corona power, these findings show that existing marine exhaust infrastructure can be repurposed as high-efficiency, zero-re-entrainment particle collectors through the integration of cold plasma electrodes.


  • Predicting Diesel Aftertreatment Efficiency Using Simulation and Machine Learning

    by Aleksandr Šabanovič, Edgar Sokolovskij, Jonas Matijošius, Aleksandras Chlebnikovas, Artūras Kilikevičius

  • Open Access

    Optimization of Ionic Wind Filtration Systems for Atmospheric Particulate Matter Removal: A Hybrid Numerical and Empirical Modeling Approach

    by Aleksandr Šabanovič, Jonas Matijošius

    This study presents an optimized numerical and empirical modeling framework for ionic wind-driven electrostatic precipitators designed for atmospheric particulate matter (PM) removal. While traditional particle tracing models in long ducts often suffer from transient evaluation errors (the “flight time paradox”), this work introduces a Fate-based Steady-state Evaluation (FSE) method. By coupling Electrostatics, Laminar Flow, and Particle Tracing in a high-fidelity 2D axisymmetric model, we achieved a baseline validation with a Mean Absolute Error (MAE) of 5.3% compared to experimental data (20 kV, 0.5 m/s). Furthermore, a non-linear regression engine based on a physical-exponential decay function was developed to provide real-time performance predictions. The resulting hybrid model demonstrates a high scientific reliability (R2 = 0.98), establishing it as a robust tool for the design and optimization of air purification systems targeting fine atmospheric aerosols (0.1–3.0 μm). In addition, the proposed Fate-based Steady-state Evaluation (FSE) method eliminates transient bias commonly observed in long-duct Lagrangian particle simulations. This methodological improvement enables statistically consistent efficiency estimation for electrohydrodynamic filtration systems and can be applied to a broad class of Computational Fluid Dynamics (CFD)-based particulate capture studies. The developed framework enables rapid design optimization of compact electrohydrodynamic filtration systems and provides a practical alternative to computationally expensive full-scale Computational Fluid Dynamics (CFD) simulations.


  • Optimizing a Diesel Aftertreatment System Using Machine Learning and Simulation

    by Aleksandr Šabanovič, Jonas Matijošius, Artūras Kilikevičius, Aleksandras Chlebnikovas, Tadas Žvirblis

  • Advancing Marine Air Quality: Efficacy and Optimization of Experimental Helical Cyclonic Filter for Particulate Matter Reduction in Ship Emissions

    by Aleksandr Šabanovič, Edgar Sokolovskij, Jonas Matijošius, Aleksandras Chlebnikovas, Artūras Kilikevičius

  • Assessment of Particle Dynamics in Electric Air Filters: The Role of Ionic Wind in Air Quality Improvement

    by Aleksandr Šabanovič, Jonas Matijošius, Artūras Kilikevičius, Aleksandras Chlebnikovas

  • Open Access

    Experimental Setup and Machine Learning-Based Prediction Model for Electro-Cyclone Filter Efficiency: Filtering of Ship Particulate Matter Emission

    by Aleksandr Šabanovič, Jonas Matijošius, Dragan Marinković, Aleksandras Chlebnikovas, Donatas Gurauskis, Johannes H. Gutheil, Artūras Kilikevičius

    Ship emissions significantly impact air quality, particularly in coastal and port regions, contributing to elevated concentrations of PM2.5, and PM10, with varying effects observed across different locations. This study investigates the effectiveness of emission control policies, inland and port-specific contributions to air pollution, and the health risks posed by particulate matter (PM). A regression discontinuity model at Ningbo Port revealed that ship activities show moderate PM2.5 and PM10 variations. In Busan Port, container ships accounted for the majority of emissions, with social costs from pollutants estimated at USD 31.55 million annually. Inland shipping near the Yangtze River demonstrated significant PM contributions, emphasizing regional impacts. Health risks from PM2.5, a major global toxic pollutant, were highlighted, with links to respiratory, cardiovascular, and cognitive disorders. Advances in air purification technologies, including hybrid electrostatic filtration systems, have shown promising efficiency in removing submicron particles and toxic gases, reducing energy costs. In this paper, a random forest machine learning model developed to predict particulate concentrations post-cleaning demonstrated robust performance (MAE = 0.49 P/cm3, R2 = 0.97). These findings underscore the critical need for stringent emission controls, innovative filtration systems, and comprehensive monitoring to mitigate the environmental and health impacts of ship emissions.