Zijian Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Zijian Wang has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
Xuemeng Fan
Zhejiang University
9 shared publications- Yishu Zhang
Zhejiang University
9 shared publications Pengtao Li
College of Integrated Circuits, Zhejiang University, ZJU-Hangzhou Global Scientific and Technological Innovation Center 1 , Hangzhou 310027
7 shared publications- Guobin Zhang
College of Integrated Circuits, Zhejiang University, Hangzhou, China
5 shared publications Qi Luo
Zhejiang University
5 shared publicationsDawei Gao
ZJU-Hangzhou Global Scientific and Technological Innovation Center
4 shared publications
Latest Publications
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 47 (10) , 2011-2014
Complementary Self-Selective Memristor for Intrinsic Differential Behavior
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 47 (10) , 2011-2014
Complementary Self-Selective Memristor for Intrinsic Differential Behavior
- 14 September 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 129 (11)
Self-rectifying volatile memristor with ultrahigh rectification enabled by asymmetric oxide heterostructures
Volatile memristors hold promise for time-domain electronic functionalities beyond static memory, but their practical adoption is impeded by leakage currents, insufficient rectification, and unstable transient behaviors. Here, we report a self-rectifying volatile memristor based on a Pt/Ga2O3/indium gallium zinc oxide (IGZO)/Ti heterostructure. Asymmetric Schottky barriers yield an ultrahigh rectification ratio exceeding 7.9 × 107, effectively suppressing reverse leakage currents and providing intrinsic selector-like characteristics. Concurrently, defect-mediated transport and charge detrapping within the IGZO layer enable volatile resistive switching with spontaneous relaxation, yielding a millisecond-scale relaxation time and eliminating the need for external reset operations. These transient dynamics, manifesting as charge accumulation, threshold switching, and relaxation, reflect the device's intrinsic temporal response. The combination of extreme rectification and volatile behavior further allows the implementation of artificial neuron functionalities for neuromorphic computing.
- 14 September 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 129 (11)
Self-rectifying volatile memristor with ultrahigh rectification enabled by asymmetric oxide heterostructures
Volatile memristors hold promise for time-domain electronic functionalities beyond static memory, but their practical adoption is impeded by leakage currents, insufficient rectification, and unstable transient behaviors. Here, we report a self-rectifying volatile memristor based on a Pt/Ga2O3/indium gallium zinc oxide (IGZO)/Ti heterostructure. Asymmetric Schottky barriers yield an ultrahigh rectification ratio exceeding 7.9 × 107, effectively suppressing reverse leakage currents and providing intrinsic selector-like characteristics. Concurrently, defect-mediated transport and charge detrapping within the IGZO layer enable volatile resistive switching with spontaneous relaxation, yielding a millisecond-scale relaxation time and eliminating the need for external reset operations. These transient dynamics, manifesting as charge accumulation, threshold switching, and relaxation, reflect the device's intrinsic temporal response. The combination of extreme rectification and volatile behavior further allows the implementation of artificial neuron functionalities for neuromorphic computing.
- Open Access
- 27 August 2026
- Published by IOP Publishing in International Journal of Extreme Manufacturing
- Vol. 8 (6) , 065508
Monolithic security primitive integration in self-rectifying memristors for extreme-temperature internet-of-things
Reliable hardware security primitives that withstand harsh temperatures are essential for the next-generation Internet of Things (IoT) deployed in industrial, automotive, and remote environments, where thermal stress undermines data integrity and device authentication. Conventional silicon-based true random number generators (TRNGs) and physical unclonable functions (PUFs) suffer from catastrophic performance degradation above 85 °C. Here, we address this critical gap with a unified, temperature-agnostic security primitive based on a Pt/HfO 2−y /WO 3−x /TiN self-rectifying memristor (SRM). The device exhibits exceptional performance across an unprecedented thermal range (from −50 to 150 °C), featuring ultrahigh rectification (>10 6 ), nonlinearity (>10 5 ), and stable non-volatility with >10-year data retention. By harnessing intrinsic random telegraph noise (RTN) and stochastic conductance decay dynamics, we monolithically integrate TRNG and PUF functionalities on a single 32 × 32 crossbar array. The TRNG demonstrates resilience against machine learning attacks, maintaining near-ideal prediction accuracy at both 150 °C and −50 °C. Simultaneously, the PUF achieves a record-low bit error rate of 1.859 × 10 −2 % across this 200 °C temperature swing, outperforming all existing silicon-based solutions by a margin greater than 85 °C.Validation against generative adversarial network attacks and tripartite authentication protocols confirms this selector-free, memristor-based approach as a pivotal advancement for secure, scalable hardware security in extreme-temperature IoT systems.
- 27 August 2026
- Published by IOP Publishing in International Journal of Extreme Manufacturing
- Vol. 8 (6) , 065508
Open AccessMonolithic security primitive integration in self-rectifying memristors for extreme-temperature internet-of-things
Reliable hardware security primitives that withstand harsh temperatures are essential for the next-generation Internet of Things (IoT) deployed in industrial, automotive, and remote environments, where thermal stress undermines data integrity and device authentication. Conventional silicon-based true random number generators (TRNGs) and physical unclonable functions (PUFs) suffer from catastrophic performance degradation above 85 °C. Here, we address this critical gap with a unified, temperature-agnostic security primitive based on a Pt/HfO 2−y /WO 3−x /TiN self-rectifying memristor (SRM). The device exhibits exceptional performance across an unprecedented thermal range (from −50 to 150 °C), featuring ultrahigh rectification (>10 6 ), nonlinearity (>10 5 ), and stable non-volatility with >10-year data retention. By harnessing intrinsic random telegraph noise (RTN) and stochastic conductance decay dynamics, we monolithically integrate TRNG and PUF functionalities on a single 32 × 32 crossbar array. The TRNG demonstrates resilience against machine learning attacks, maintaining near-ideal prediction accuracy at both 150 °C and −50 °C. Simultaneously, the PUF achieves a record-low bit error rate of 1.859 × 10 −2 % across this 200 °C temperature swing, outperforming all existing silicon-based solutions by a margin greater than 85 °C.Validation against generative adversarial network attacks and tripartite authentication protocols confirms this selector-free, memristor-based approach as a pivotal advancement for secure, scalable hardware security in extreme-temperature IoT systems.
- 10 November 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (19)
Superior rectification self-rectifying memristors with self-recovery capabilities enabled by GaOx/InOx heterostructures
Memristors are poised to revolutionize neuromorphic computing and next-generation memory, yet persistent challenges, including stochastic conductance control, limited endurance, and poor scalability, impede their practical adoption. Here, we report a self-rectifying memristor leveraging a GaOx/InOx heterostructure to overcome these barriers. The device demonstrates an ultrahigh rectification ratio and nonlinearity (>107), effectively suppressing sneak currents in passive crossbar arrays. Robust multi-level conductance modulation and cycling stability exceeding 106 cycles are achieved, alongside minimal inter-device variability (σ/μ < 10%) in a 6 × 6 passive array. Critically, it demonstrates dynamic tunability between short-term and long-term plasticity, modulated via pulse number/amplitude, a cornerstone for biologically inspired learning. By implementing the one-bitline pull-up scheme, the design achieves an integration density of 125.1 Tb at a 10% read margin, outperforming state-of-the-art resistive memories. This work establishes oxide heterostructures as a scalable platform for high-density neuromorphic systems, bridging the gap between functional material innovation and hardware-driven machine intelligence.
- 10 November 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (19)
Superior rectification self-rectifying memristors with self-recovery capabilities enabled by GaOx/InOx heterostructures
Memristors are poised to revolutionize neuromorphic computing and next-generation memory, yet persistent challenges, including stochastic conductance control, limited endurance, and poor scalability, impede their practical adoption. Here, we report a self-rectifying memristor leveraging a GaOx/InOx heterostructure to overcome these barriers. The device demonstrates an ultrahigh rectification ratio and nonlinearity (>107), effectively suppressing sneak currents in passive crossbar arrays. Robust multi-level conductance modulation and cycling stability exceeding 106 cycles are achieved, alongside minimal inter-device variability (σ/μ < 10%) in a 6 × 6 passive array. Critically, it demonstrates dynamic tunability between short-term and long-term plasticity, modulated via pulse number/amplitude, a cornerstone for biologically inspired learning. By implementing the one-bitline pull-up scheme, the design achieves an integration density of 125.1 Tb at a 10% read margin, outperforming state-of-the-art resistive memories. This work establishes oxide heterostructures as a scalable platform for high-density neuromorphic systems, bridging the gap between functional material innovation and hardware-driven machine intelligence.
- 6 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 46 (12) , 2349-2352
Topology-Aware Recognition Framework Based on Ultra-High On/Off Ratio Memristors for Handwritten Digit Recognition
Conventional passive memristor arrays face crosstalk challenges in on-chip neuromorphic computing, while 1T1R/1S1R architectures suffer from limited scalability and area overhead. Here, we propose a topology-aware recognition framework for crosstalk-free on-chip compute-in-memory (CIM) using high-performance Pt/In2O3(Cr-doped)/W memristors. The devices demonstrate exceptional metrics: an ultra-high on/off ratio (>10⁸), retention exceeding 107 s, and endurance over 10⁵ cycles. Integrated into passive arrays, these memristors enable a novel paradigm that converts image pixel intensities into spatiotemporal pulse sequences encoding topological features (spatial brightness relationships). These features are mapped to 32 × 32 crossbar arrays, where recognition is determined by counting diagonal-activated devices—ensuring single-device activation per row/column to eliminate crosstalk. The system achieves 99.8% accuracy on MNIST and scalability to 6.59 PB (with 10% read margin), outperforming existing on-chip networks. This work bridges device innovation with algorithmic co-design, advancing energy-efficient neuromorphic hardware for pattern recognition.
- 6 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 46 (12) , 2349-2352
Topology-Aware Recognition Framework Based on Ultra-High On/Off Ratio Memristors for Handwritten Digit Recognition
Conventional passive memristor arrays face crosstalk challenges in on-chip neuromorphic computing, while 1T1R/1S1R architectures suffer from limited scalability and area overhead. Here, we propose a topology-aware recognition framework for crosstalk-free on-chip compute-in-memory (CIM) using high-performance Pt/In2O3(Cr-doped)/W memristors. The devices demonstrate exceptional metrics: an ultra-high on/off ratio (>10⁸), retention exceeding 107 s, and endurance over 10⁵ cycles. Integrated into passive arrays, these memristors enable a novel paradigm that converts image pixel intensities into spatiotemporal pulse sequences encoding topological features (spatial brightness relationships). These features are mapped to 32 × 32 crossbar arrays, where recognition is determined by counting diagonal-activated devices—ensuring single-device activation per row/column to eliminate crosstalk. The system achieves 99.8% accuracy on MNIST and scalability to 6.59 PB (with 10% read margin), outperforming existing on-chip networks. This work bridges device innovation with algorithmic co-design, advancing energy-efficient neuromorphic hardware for pattern recognition.
- Open Access
- 18 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 13, 383-389
Reliable Multistate RRAM Devices for Reconfigurable CAM and IMC Applications
This work presents a reliable multistate RRAM device based on a Cu/Ta2O5/WO3-x/Pt structure, utilizing fully CMOS-compatible materials. The device demonstrates four distinct resistive states under varying switching voltages, achieving a swift response time of 25 ns and an on/off ratio exceeding 104. Additionally, it demonstrates a robust data retention time exceeding 106 seconds and endures more than 104 pulses in endurance tests. Statistical analysis conducted over 100 cycles across ten devices reveals consistent resistance characteristics, with variations maintained below 10%. Leveraging these advantages, the RRAM devices were integrated with MOS transistors to construct a 4T2R unit-based array, enabling reconfigurable applications such as analog voltage-based content-addressable memory (CAM) and in-memory computing (IMC) accelerators. Notably, the proposed solution reduces energy consumption by over 20% in CAM applications and significantly enhances energy efficiency for fingerprint recognition tasks through convolution operations, achieving more than three times the energy efficiency compared to conventional GPU and CPU systems while maintaining an accuracy of 98%.
- 18 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 13, 383-389
Open AccessReliable Multistate RRAM Devices for Reconfigurable CAM and IMC Applications
This work presents a reliable multistate RRAM device based on a Cu/Ta2O5/WO3-x/Pt structure, utilizing fully CMOS-compatible materials. The device demonstrates four distinct resistive states under varying switching voltages, achieving a swift response time of 25 ns and an on/off ratio exceeding 104. Additionally, it demonstrates a robust data retention time exceeding 106 seconds and endures more than 104 pulses in endurance tests. Statistical analysis conducted over 100 cycles across ten devices reveals consistent resistance characteristics, with variations maintained below 10%. Leveraging these advantages, the RRAM devices were integrated with MOS transistors to construct a 4T2R unit-based array, enabling reconfigurable applications such as analog voltage-based content-addressable memory (CAM) and in-memory computing (IMC) accelerators. Notably, the proposed solution reduces energy consumption by over 20% in CAM applications and significantly enhances energy efficiency for fingerprint recognition tasks through convolution operations, achieving more than three times the energy efficiency compared to conventional GPU and CPU systems while maintaining an accuracy of 98%.
- 23 September 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (13)
Self-rectifying memristors with high rectification ratio and dynamic linearity for in-memory computing
In the era of big data, the necessity for in-memory computing has become increasingly pressing, rendering memristors a crucial component in next-generation computing architectures. The self-rectifying memristor (SRM), in particular, has emerged as a promising solution to mitigate the sneak path current issue in crossbar architectures. In this work, a Pt/HfO2/WO3−x/TiN SRM structure is reported with an impressive rectification ratio above 106. To elucidate the underlying mechanisms, we systematically investigate the impact of the WO3−x resistive layer thickness modulation on the device's conductive behavior. Our findings reveal that the abundant traps in the WO3−x resistive layer and the excellent insulating property of HfO2 synergistically suppress negative current while promoting positive current. According to the simulation, the crossbar array based on the proposed SRMs can realize an array scale of over 21 Gbit. Furthermore, artificial synapses fabricated using these SRMs demonstrate a remarkable linearity of 0.9973. In conclusion, our results underscore the great potential of these SRMs for the ultra-large-scale integration of neuromorphic hardware, providing a guide for future ultra-high-energy efficiency hardware with minimal circuit overhead.
- 23 September 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (13)
Self-rectifying memristors with high rectification ratio and dynamic linearity for in-memory computing
In the era of big data, the necessity for in-memory computing has become increasingly pressing, rendering memristors a crucial component in next-generation computing architectures. The self-rectifying memristor (SRM), in particular, has emerged as a promising solution to mitigate the sneak path current issue in crossbar architectures. In this work, a Pt/HfO2/WO3−x/TiN SRM structure is reported with an impressive rectification ratio above 106. To elucidate the underlying mechanisms, we systematically investigate the impact of the WO3−x resistive layer thickness modulation on the device's conductive behavior. Our findings reveal that the abundant traps in the WO3−x resistive layer and the excellent insulating property of HfO2 synergistically suppress negative current while promoting positive current. According to the simulation, the crossbar array based on the proposed SRMs can realize an array scale of over 21 Gbit. Furthermore, artificial synapses fabricated using these SRMs demonstrate a remarkable linearity of 0.9973. In conclusion, our results underscore the great potential of these SRMs for the ultra-large-scale integration of neuromorphic hardware, providing a guide for future ultra-high-energy efficiency hardware with minimal circuit overhead.
- Open Access
- 22 March 2024
- Published by IOP Publishing in International Journal of Extreme Manufacturing
- Vol. 6 (3) , 032006
Advances of embedded resistive random access memory in industrial manufacturing and its potential applications
Highlights: Below are the highlights of this review: This paper explores embedded RRAM development, parameters, and integration tech compatible with CMOS, highlighting advantages in embedded systems and its potential impact on chip process nodes. This paper introduces recent industry developments in embedded RRAM, featuring research from companies like Intel and TSMC, showcasing significant commercial application potential. This paper discusses embedded RRAM’s progress beyond storage, exploring potential applications in FPGA, MCU, CIM, and Neuromorphic Computing, along with challenges and future prospects.
- 22 March 2024
- Published by IOP Publishing in International Journal of Extreme Manufacturing
- Vol. 6 (3) , 032006
Open AccessAdvances of embedded resistive random access memory in industrial manufacturing and its potential applications
Highlights: Below are the highlights of this review: This paper explores embedded RRAM development, parameters, and integration tech compatible with CMOS, highlighting advantages in embedded systems and its potential impact on chip process nodes. This paper introduces recent industry developments in embedded RRAM, featuring research from companies like Intel and TSMC, showcasing significant commercial application potential. This paper discusses embedded RRAM’s progress beyond storage, exploring potential applications in FPGA, MCU, CIM, and Neuromorphic Computing, along with challenges and future prospects.
- 4 March 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (10)
Dual-layer volatile memristor with ultralow voltage slope
In this Letter, we present a dual-layer oxide volatile memristor characterized by an Ag/TaOx/ZnO/Pt structure. This innovative design deviates from traditional Ag/ZnO/Pt devices, chiefly through the introduction of a thin TaOx layer between the electrolyte and the active electrode. Our devices exhibit remarkable features, including an unprecedentedly low switching voltage slope, measuring a mere 0.221 mV/dec, and a threshold voltage that can be reduced to as low as 0.177 V. To further elucidate the performance enhancement of the device, we utilize first-principles calculations. The results reveal that the relatively high formation energy of oxygen vacancies in the supplementary TaOx layer facilitates meticulous control over the rupture and formation of silver conductive nanofilaments.
- 4 March 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (10)
Dual-layer volatile memristor with ultralow voltage slope
In this Letter, we present a dual-layer oxide volatile memristor characterized by an Ag/TaOx/ZnO/Pt structure. This innovative design deviates from traditional Ag/ZnO/Pt devices, chiefly through the introduction of a thin TaOx layer between the electrolyte and the active electrode. Our devices exhibit remarkable features, including an unprecedentedly low switching voltage slope, measuring a mere 0.221 mV/dec, and a threshold voltage that can be reduced to as low as 0.177 V. To further elucidate the performance enhancement of the device, we utilize first-principles calculations. The results reveal that the relatively high formation energy of oxygen vacancies in the supplementary TaOx layer facilitates meticulous control over the rupture and formation of silver conductive nanofilaments.