JZJia-Hui Zhao

Jia-Hui Zhao

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jia-Hui Zhao has a total of 29 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A D -Band Planar 2-D Multibeam Modulated Metasurface Antenna Based on Gaussian Non-uniform Modulation

    by Jia-Hui Zhao, Chen-Yu Ding, Zhuo-Wei Miao, Wei Hong, Stefano Maci, Zhang-Cheng Hao

    This paper presents a planar two-dimensional (2-D) multibeam modulated metasurface antenna (MMA) operating in the D-band. Conventional multibeam MMAs often suffer from substantial gain and 3-dB gain bandwidth degradation when beams steer to large scanning angles, limiting their practical utility in emerging terahertz systems. To address this challenge, a Gaussian non-uniform modulation technique is introduced, which optimizes the aperture field distribution and energy concentration across the scanning range. For experimental verification, a 2-D nine-beam MMA operating at 126 GHz is designed, incorporating a compact rectangular waveguide-to-monopole transition structure for efficient surface wave excitation. In addition, the implementation of gap waveguide at the feed interface ensures reliable multi-port feeding with a simple mounting structure. The proposed multibeam MMA is fabricated by quartz photolithography. Measurement results demonstrate a wide scanning coverage of ±60° with a low scanning loss of only 0.5 dB and a minimal variation in the gain–bandwidth (GB) product. To the best of our knowledge, this work represents the first multibeam MMA realized at terahertz frequencies, offering a compelling solution for next-generation radar systems requiring agile, multi-user, and wide-angle beam steering.

  • 300-GHz On-Chip Complementary Source Antenna and Its Application to Silicon-Based Integrated Transmitter for Communication

    by Si-Yuan Tang, Rui Zhou, Zekun Li, Yu Zheng, Sidou Zheng, Xiaoyue Xia, Dawei Tang, Zheng Yan, Jia-Hui Zhao, Er Ya Zhou, et al.

    In this paper, a 300-GHz on-chip complementary source antenna is first proposed for an integrated transmitter. By selectively removing the silicon substrate using the localized backside etching (LBE) process, the enhanced gain and stable performance are simultaneously realized for the proposed antenna. Moreover, differential monopoles and a dielectric resonator contribute to the electric and magnetic sources, respectively, leading to a wide operating bandwidth. Additionally, the introduction of copper package and differential excitations are investigated for surface wave suppression and radiation efficiency improvement, without any additional post-processing steps. The proposed antenna is fabricated in 130 nm SiGe process, and measurement results show a high gain of 9.0 dBi. Moreover, to realize long-distance wireless communication, a dual-channel transmitter with a lens is constructed. Different from the silicon-lens loading technique with low flexibility and bulky size, a solution integrating the on-chip antenna and low-loss Fresnel zone lens is proposed for significantly boosting the antenna gain and lowering the profile. The proposed transmitter is measured, and the results show a high EIRP of 30.8 dBm with a 3-dB bandwidth from 291 to 321 GHz. Furthermore, the wireless link is achieved using 16QAM modulation at a distance as long as 1.5 m, which demonstrates it a good candidate for terahertz point-to-point communication.


  • A 300-GHz 5T5R Silicon-Based MIMO Transceiver Integrated With a 2-D Multifocal Transmit-Array

    by Jia-Hui Zhao, Si-Yuan Tang, Feng Xie, Chen-Yu Ding, Zhuo-Wei Miao, Ji-Xin Chen, Wei Hong, Zhang-Cheng Hao

    This article presents a 300-GHz 5T5R silicon-based multiple-input multiple-output (MIMO) transceiver integrated with a multifocal transmit-array (TA). 300-GHz transmitter and receiver chips are integrated and share the TA with 2-D distributed foci for achieving a compact system size and a large throughput. To extend the scanning angle and reduce the scanning loss, the Gaussian phase correction is proposed to develop the TA. Thus, multiple transmitting and receiving beams with different beam directions within a wide coverage angle can be realized. As a proof of concept, five pairs of transmitter and receiver chips are configured in a cross formation on the focal plane of the multifocal TA for a 5T5R MIMO transceiver, illustrating that the proposed architecture has a wide coverage angle of ±40°. Experiments are carried out to verify the proposed design. The measured downlink peak effective isotropic radiated power (EIRP) at saturation and the uplink conversion gain are 30.6 dBm and 7.9 dB at 307 GHz, respectively, leading to a total throughput of 66.8 Gb/s. The experimental results confirm the applicability of the proposed architecture, which can be a promising solution for improving the transmission capabilities of terahertz (THz) wireless communication.


  • A High-Gain Terahertz Metallic Modulated Metasurface Antenna With a Wide Gain Bandwidth

    by Jia-Hui Zhao, Chen-Yu Ding, Zhuo-Wei Miao, Stefano Maci, Zhang-Cheng Hao

    Electrically large modulated metasurface antennas (MMAs) possess advantages of simple feeding and absence of beam forming network, while achieving a high radiation gain. However, they suffer from limitation in the gain-bandwidth product. This paper introduces a technique to expand the bandwidth of gain by utilizing a polarization selective surface (PSS). The PSS can generate a more uniform phase distribution and almost identical polarized directions above the MMA to improve its radiation performance, including the realized gain, gain bandwidth, sidelobe level and cross-polarization level. Detailed analysis is presented and discussed. For experimental verification, a D-band metallic MMA loaded with a PSS is fabricated and measured. The proposed metallic MMA is manufactured by high-precision 3D-printed technique and metalized using the magnetron-sputtering gold coating. The measured maximum realized gain is 30.5 dBi at 131 GHz with a measured 3-dB gain bandwidth of 9% which approaches the theoretical limit found for such antennas. The proposed MMA shows potential superiorities for developing high gain and low-profile THz antennas, even with an operating frequency over 300 GHz.


  • An Efficiency-Enhanced High-Gain Large-Element Array for 220-GHz Band Applications

    by Chen-Yu Ding, Jia-Hui Zhao, De-Ming Sun, Zhuo-Wei Miao, Longzhu Cai, Yuehe Ge, Zhang-Cheng Hao

    Compared to small radiating elements, large elements can reduce the stages and the losses of power dividers (PD) within the same array aperture, significantly enhancing the array's radiation efficiency. However, it faces the grating lobe challenge when they are formed into an array. This paper investigates the factors that affect the rectangular lattice large element array's sidelobe levels (SLL). Results show that the sidelobes are independent of element spacing but closely related to aperture efficiency (AE) and array scale. The element's AE and number in the arraying dimension are suggested to be at least 82% and 4, respectively. The lens is selected as the large element's architecture because its optimized feed and phase-shifting surface make it relatively easy to achieve a higher field uniformity, that is, a higher AE. Methods for extracting the 1-D aperture efficiencies of a 2-D region are proposed in this paper to validate the derived SLL rules in full-wave simulations, and a simplified form is employed for the rapid optimization of architectural parameters. Finally, a 4 × 4 scale high AE lens array is designed with an element size of 6 λ0 × 10 λ0. The reached directivity at 220 GHz is 39.7 dBi, with aperture efficiency almost above 70% within the 170 ~ 260 GHz band. For the convenience of measurement, a prototype with a 16-way power divider is fabricated. The measured peak realized gain is 37 dBi, with a peak total efficiency of 42% and a 3-dB gain bandwidth of 20.7%.


  • A 220 GHz High-Gain Low-Cost Slot Array Antenna With Integrated Fabry–Perot Cavity

    by Chen-Yu Ding, Zhang-Cheng Hao, Zhuo-Wei Miao, Yi-Wen Wu, De-Ming Sun, Jia-Hui Zhao, Zhengbo Jiang

    This paper presents a 220 GHz planar high-gain slot array (SA) antenna with an integrated Fabry-Perot cavity (FPC). The sophisticated SA is fabricated by low-cost printed-circuit-board (PCB) technology, and a FPC structure is used to improve the gain. In contrast to the conventional FPC which requires large air gaps between feed and partial reflective surface (PRS), the proposed PRS is integrated with SA on double sides of a single substrate, resulting in a more compact and stable architecture. By using PCB and integrated FPC technology, the gain of this antenna can be 1.2 dB higher than a pure metal SA with the same scale, while the cost is much lower, and the profile increases slightly. For verification, a 220 GHz prototype is designed, fabricated and measured. The simulated peak aperture efficiency (AE) is 69%, the experiments show a peak gain of 30.1 dBi and a total efficiency (TE) of 38.3%. The 3-dB gain bandwidth is 3.2%. Compared with congener sub-THz planar antennas using low-cost fabrication methods, this antenna can remain a relatively high AE and TE under the high gain (more than 30 dBi) condition, which can be a good candidate for terahertz wireless applications.


  • A 1.0-THz High-Gain Metal-Only Transmit-Array Antenna Based on High-Precision UV-LIGA Microfabrication Technology

    by Zhuo-Wei Miao, Zhenhao Liu, Zhang-Cheng Hao, Yongbin Zeng, Di Zhu, Jia-Hui Zhao, Chen- Yu Ding, Li Cheng, Lei Zhao, Wei Hong

    Implementing high-gain antennas operating in exceedingly high THz regions, e.g., the challenging WR-1.0 band, relies significantly on dependable microfabrication technologies. Due to the advantages of high precision, low cost, and high uniformity, this paper presents a 1.0-THz 64×64-element high-gain metal-only transmit-array (TA) antenna fabricated using ultraviolet photolithography techniques in conjunction with micro electroforming (collectively, UV-LIGA). As a highly parallel batch fabrication technology, the UV-LIGA consists of three main stages in this case, namely film fabrication, electroforming, and assembly. In full consideration of array structural stability and intrinsic connectivity based on the UV-LIGA, the proposed phasing element design employs a five-layered folded-slot structure with four air-filled spacer layers. By placing a shim layer between two contiguous folded-slot slices, whose thickness can be varied by modifying the electroforming time, each air gap can be accurately and flexibly ensured. The fabricated TA prototype is experimentally validated in a THz chamber. The maximum gain is 36.47 dBi, and its corresponding aperture efficiency is equal to 25.96%. The measured 3-dB gain bandwidth is from 0.79 to 1.03 THz.