Wen Shao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Wen Shao has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Yong Xie
School of Geographical Sciences, Nanjing University of Information Science and Technology, Nanjing, China
11 shared publications - Jie Han
School of Geography and Geomatics, Xuchang University, Xuchang, China
4 shared publications - Yidan Chen
School of Geographical Sciences, Nanjing University of Information Science and Technology, Nanjing, China
3 shared publications - Zui Tao
Aerospace Information Research Institute, Chinese Academy of Sciences, Beijing 100101, China
3 shared publications - Fengyu Luo
School of Geographical Sciences, Nanjing University of Information Science and Technoloy, Nanjing, China
2 shared publications - Meng Yang
School of Geographical Sciences, Nanjing University of Information Science and Technoloy, Nanjing, China
2 shared publications
Latest Publications
- Open Access
- 12 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 19 (19391404) , 7010-7023
A Refined Radiometric Cross-Calibration of HJ-2B/IRS Over Plateau Lakes Using the Double-Difference Method
The Infrared Scanner (IRS) onboard the HJ-2B satellite is a high-resolution, dual-channel thermal infrared sensor suitable for applications such as land-surface temperature retrieval and smoke detection. Radiometric calibration is a fundamental prerequisite for ensuring the quality and reliability of IRS observation data and is typically performed via two-point (high- and low-temperature) calibration using the instrument's onboard blackbody. However, the effectiveness of this procedure can be constrained by performance degradation of the calibration hardware and by its frequency of usage. In response to these limitations, this article proposes a refined radiometric cross-calibration method for the HJ-2B/IRS sensor over plateau lakes, which adopts the double-difference method as the technical basis and uses the high-accuracy Terra/MODIS as the reference sensor. Implemented through rigorous screening of calibration sites and sampling points, the method explicitly accounts for viewing geometry, as well as contemporaneous surface and atmospheric conditions. Firstly, calibration points between IRS and MODIS are screened by setting a CV threshold and using the RANSAC algorithm. Next, given the surface and atmospheric conditions at the satellite overpass time, radiances at calibration points with large viewing zenith angles were corrected to their nadir-equivalent values, and a temperature-dependent simulated brightness temperature difference function is constructed, from which the fitted calibration coefficients (FCCs) are derived using the double-difference method. Finally, validation with Landsat-8/TIRS indicates that IRS brightness temperatures calculated by the FCCs deviate less from the TIRS observations than those computed with the official calibration coefficients (OCCs) issued by the China Centre for Resources Satellite Data and Application. Furthermore, when compared with the top-of-atmosphere brightness temperatures derived from forward modeling of in situ measurement data, the IRS at-aperture brightness temperature computed using the FCCs shows mean deviations of −1.04 K and −0.92 K for Band 8 and Band 9, respectively. These values are superior to the corresponding deviations of −1.32 K and −2.43 K obtained using the OCCs. Following a quantitative analysis of various factors influencing the FCCs, the total uncertainty for IRS Band 8 and Band 9 was determined to be below 0.937% and 1.257%, respectively.
- 12 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 19 (19391404) , 7010-7023
Open AccessA Refined Radiometric Cross-Calibration of HJ-2B/IRS Over Plateau Lakes Using the Double-Difference Method
The Infrared Scanner (IRS) onboard the HJ-2B satellite is a high-resolution, dual-channel thermal infrared sensor suitable for applications such as land-surface temperature retrieval and smoke detection. Radiometric calibration is a fundamental prerequisite for ensuring the quality and reliability of IRS observation data and is typically performed via two-point (high- and low-temperature) calibration using the instrument's onboard blackbody. However, the effectiveness of this procedure can be constrained by performance degradation of the calibration hardware and by its frequency of usage. In response to these limitations, this article proposes a refined radiometric cross-calibration method for the HJ-2B/IRS sensor over plateau lakes, which adopts the double-difference method as the technical basis and uses the high-accuracy Terra/MODIS as the reference sensor. Implemented through rigorous screening of calibration sites and sampling points, the method explicitly accounts for viewing geometry, as well as contemporaneous surface and atmospheric conditions. Firstly, calibration points between IRS and MODIS are screened by setting a CV threshold and using the RANSAC algorithm. Next, given the surface and atmospheric conditions at the satellite overpass time, radiances at calibration points with large viewing zenith angles were corrected to their nadir-equivalent values, and a temperature-dependent simulated brightness temperature difference function is constructed, from which the fitted calibration coefficients (FCCs) are derived using the double-difference method. Finally, validation with Landsat-8/TIRS indicates that IRS brightness temperatures calculated by the FCCs deviate less from the TIRS observations than those computed with the official calibration coefficients (OCCs) issued by the China Centre for Resources Satellite Data and Application. Furthermore, when compared with the top-of-atmosphere brightness temperatures derived from forward modeling of in situ measurement data, the IRS at-aperture brightness temperature computed using the FCCs shows mean deviations of −1.04 K and −0.92 K for Band 8 and Band 9, respectively. These values are superior to the corresponding deviations of −1.32 K and −2.43 K obtained using the OCCs. Following a quantitative analysis of various factors influencing the FCCs, the total uncertainty for IRS Band 8 and Band 9 was determined to be below 0.937% and 1.257%, respectively.
- Open Access
- 2 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 18 (19391404) , 14897-14911
Refined Monitoring of Water Bodies in Built-Up Areas and Analysis and Evaluation of Water Color Characteristics in Complex Urban Backgrounds
With the rapid construction and development of cities in China, urban water environment changes and water quality monitoring face increasingly complex challenges. Water body extraction in complex urban settings is susceptible to environmental disturbances, reducing monitoring accuracy and efficiency. Additionally, Traditional water quality detection methods, relying on laboratory sampling and analysis, are hindered by high costs and long cycles. To address these issues, this study constructs a high-resolution satellite imagery dataset for urban contexts and trains four deep learning models (UNet, DeepLab, PSPNet, Segformer) for water body extraction. A method combining the water color index and geographic detector for rapid water quality assessment is also proposed. The research shows that Segformer performs best in handling complex urban background issues (e.g., shadow problems), achieving a water body extraction accuracy of 98.64%. The self-constructed dataset demonstrates good accuracy across all four models, effectively addressing urban environment diversity and interference factors. For water quality assessment, the study combines the water color index and geographic detector, establishing a rapid evaluation method. Using the water color index for preliminary assessment and the geographic detector to analyze the impact of environmental factors on water quality changes, the results for Shenzhen's built-up area show that primary and secondary water colors represent 39.17% and 52.81%, respectively. Comparison with measured data reveals a root mean square error of 3.9° and an average absolute percentage error of 1.5%, validating the proposed method's accuracy. Industrial location, population density, soil erosion, and other factors significantly affect water color, particularly as industrial activities and soil erosion alter water composition and suspended solids, directly impacting water color. The interaction analysis using the geographic detector highlights how the combined influence of factors such as industrial activities, soil erosion affects water color changes, providing a clearer understanding of the spatial factors driving water quality variations in urban environments.
- 2 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 18 (19391404) , 14897-14911
Open AccessRefined Monitoring of Water Bodies in Built-Up Areas and Analysis and Evaluation of Water Color Characteristics in Complex Urban Backgrounds
With the rapid construction and development of cities in China, urban water environment changes and water quality monitoring face increasingly complex challenges. Water body extraction in complex urban settings is susceptible to environmental disturbances, reducing monitoring accuracy and efficiency. Additionally, Traditional water quality detection methods, relying on laboratory sampling and analysis, are hindered by high costs and long cycles. To address these issues, this study constructs a high-resolution satellite imagery dataset for urban contexts and trains four deep learning models (UNet, DeepLab, PSPNet, Segformer) for water body extraction. A method combining the water color index and geographic detector for rapid water quality assessment is also proposed. The research shows that Segformer performs best in handling complex urban background issues (e.g., shadow problems), achieving a water body extraction accuracy of 98.64%. The self-constructed dataset demonstrates good accuracy across all four models, effectively addressing urban environment diversity and interference factors. For water quality assessment, the study combines the water color index and geographic detector, establishing a rapid evaluation method. Using the water color index for preliminary assessment and the geographic detector to analyze the impact of environmental factors on water quality changes, the results for Shenzhen's built-up area show that primary and secondary water colors represent 39.17% and 52.81%, respectively. Comparison with measured data reveals a root mean square error of 3.9° and an average absolute percentage error of 1.5%, validating the proposed method's accuracy. Industrial location, population density, soil erosion, and other factors significantly affect water color, particularly as industrial activities and soil erosion alter water composition and suspended solids, directly impacting water color. The interaction analysis using the geographic detector highlights how the combined influence of factors such as industrial activities, soil erosion affects water color changes, providing a clearer understanding of the spatial factors driving water quality variations in urban environments.
- Open Access
- 21 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 18 (19391404) , 11634-11648
Validation of Cross-Calibration for the Time-Series of HJ-2A/B CCD Sensor Based on Baotou Sandy Site
High resolution and wide coverage are important development directions for optical sensors on satellites. Multi-camera mosaic imaging technology is often used to combine high resolution with wide coverage. When using data from these sensors for quantitative remote sensing studies, radiometric calibration is important. Based on this, this study employs a cross-calibration method incorporating the random forest algorithm and spectral interpolation to derive the time-series calibration coefficients for the charge-coupled device (CCD) sensors on the HuanJing-2A/B (HJ-2A/B) satellites, and examines the applicability of this method. The results show that, compared with the official calibration coefficients (OCCs), the relative errors of the cross-calibration results are predominantly within 10%, with the majority falling below 5%. When compared with the measured reflectance from the Baotou sandy site, the results of this study show better consistency with the 1:1 line and have average relative errors less than 8.07%, while the OCCs have average relative errors less than 34.65%. Besides, for the bands exhibiting larger individual errors relative to the OCCs, the validation results indicate that the average relative errors of these bands are smaller than those of the OCCs when referenced against the Baotou sandy site. Furthermore, the influence of different input parameters on the bidirectional reflectance distribution function (BRDF) model, not considering BRDF correction of CCD2 and CCD3 sensors on the calibration results, using the single-day coefficients, which are close to the date of the Baotou sandy site on validation results, are discussed. Finally, the study also evaluates the radiometric consistency between different cameras. The result indicates that the method proposed is applicable to other CCD sensors on HJ-2A/B, and the cross-calibration coefficients obtained can effectively eliminate radiometric inconsistencies among different cameras.
- 21 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 18 (19391404) , 11634-11648
Open AccessValidation of Cross-Calibration for the Time-Series of HJ-2A/B CCD Sensor Based on Baotou Sandy Site
High resolution and wide coverage are important development directions for optical sensors on satellites. Multi-camera mosaic imaging technology is often used to combine high resolution with wide coverage. When using data from these sensors for quantitative remote sensing studies, radiometric calibration is important. Based on this, this study employs a cross-calibration method incorporating the random forest algorithm and spectral interpolation to derive the time-series calibration coefficients for the charge-coupled device (CCD) sensors on the HuanJing-2A/B (HJ-2A/B) satellites, and examines the applicability of this method. The results show that, compared with the official calibration coefficients (OCCs), the relative errors of the cross-calibration results are predominantly within 10%, with the majority falling below 5%. When compared with the measured reflectance from the Baotou sandy site, the results of this study show better consistency with the 1:1 line and have average relative errors less than 8.07%, while the OCCs have average relative errors less than 34.65%. Besides, for the bands exhibiting larger individual errors relative to the OCCs, the validation results indicate that the average relative errors of these bands are smaller than those of the OCCs when referenced against the Baotou sandy site. Furthermore, the influence of different input parameters on the bidirectional reflectance distribution function (BRDF) model, not considering BRDF correction of CCD2 and CCD3 sensors on the calibration results, using the single-day coefficients, which are close to the date of the Baotou sandy site on validation results, are discussed. Finally, the study also evaluates the radiometric consistency between different cameras. The result indicates that the method proposed is applicable to other CCD sensors on HJ-2A/B, and the cross-calibration coefficients obtained can effectively eliminate radiometric inconsistencies among different cameras.
- Open Access
- 21 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 18 (19391404) , 8747-8762
Classification of Paddy Rice Planting Area Through Feature Selection Method Using Sentinel-1/2 Time Series Images
Utilizing remote sensing technology to accurately and efficiently extract paddy rice planting area is crucial for ensuring food security. In southern Jiangsu, cloudy and rainy weather impairs the effectiveness of optical satellite images, while complex surface coverage reduces the precision of paddy rice classification. Therefore, this study took Liyang City as the study area, reconstructed Sentinel-2 cloud-free time series optical images, and extracted spectral features, vegetation indexes, and other features, in combination with the polarization features of the Sentinel-1 time series radar images. The optimal feature subset was selected through the feature selection method, and machine learning algorithms were optimized for paddy rice planting area classification. Results indicated that: 1) The reconstruction of cloud-free time series images with the Cloud Score+ method and the integrated NSPI and MNSPI approach was stable and effective, with correlation coefficients (r) exceeding 0.87 and low values for indicators such as root mean square error (RMSE), Robert's edge (Edges), and local binary patterns (LBP), meeting the requirements for paddy rice classification. 2) The classification accuracy of combining Sentinel-1 polarization features with Sentinel-2 spectral features could improve by up to 10.52% compared to before the combination. The combination of polarization features, spectral features, and difference features achieved the highest overall accuracy (OA), but the mapping exhibited salt-and-pepper noise. 3) The integration of multi-source remote sensing data and feature selection effectively improved paddy rice classification accuracy. The CFS and GSW algorithms performed the best, with an OA of 93.97% and a Kappa coefficient (Kappa) of 0.9176, producing less mapping noise and higher classification accuracy for paddy rice. The study provides methodological support and a practical case for paddy rice planting area classification in the southern region using remote sensing.
- 21 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 18 (19391404) , 8747-8762
Open AccessClassification of Paddy Rice Planting Area Through Feature Selection Method Using Sentinel-1/2 Time Series Images
Utilizing remote sensing technology to accurately and efficiently extract paddy rice planting area is crucial for ensuring food security. In southern Jiangsu, cloudy and rainy weather impairs the effectiveness of optical satellite images, while complex surface coverage reduces the precision of paddy rice classification. Therefore, this study took Liyang City as the study area, reconstructed Sentinel-2 cloud-free time series optical images, and extracted spectral features, vegetation indexes, and other features, in combination with the polarization features of the Sentinel-1 time series radar images. The optimal feature subset was selected through the feature selection method, and machine learning algorithms were optimized for paddy rice planting area classification. Results indicated that: 1) The reconstruction of cloud-free time series images with the Cloud Score+ method and the integrated NSPI and MNSPI approach was stable and effective, with correlation coefficients (r) exceeding 0.87 and low values for indicators such as root mean square error (RMSE), Robert's edge (Edges), and local binary patterns (LBP), meeting the requirements for paddy rice classification. 2) The classification accuracy of combining Sentinel-1 polarization features with Sentinel-2 spectral features could improve by up to 10.52% compared to before the combination. The combination of polarization features, spectral features, and difference features achieved the highest overall accuracy (OA), but the mapping exhibited salt-and-pepper noise. 3) The integration of multi-source remote sensing data and feature selection effectively improved paddy rice classification accuracy. The CFS and GSW algorithms performed the best, with an OA of 93.97% and a Kappa coefficient (Kappa) of 0.9176, producing less mapping noise and higher classification accuracy for paddy rice. The study provides methodological support and a practical case for paddy rice planting area classification in the southern region using remote sensing.
- Open Access
- 20 November 2024
- Published by MDPI AG in Remote Sensing
- Vol. 16 (22) , 4337
Radiometric Cross-Calibration of HJ-2A/CCD3 Using the Random Forest Algorithm and a Spectral Interpolation Convolution Method with Sentinel-2/MSI
In the process of radiometric calibration, the corrections for bidirectional reflectance distribution functions (BRDFs) and spectral band adjustment factors (SBAFs) are crucial. Time-series MODIS images are commonly used to construct BRDFs by using the Ross–Li model in current research. However, the Ross–Li BRDF model is based on the linear relationship between the kernel models and is unable to take into account the nonlinear relationship between them. Furthermore, when using SBAF to account for spectral difference, a radiative transfer model is often used, but it requires many parameters to be set, which may introduce more errors and reduce the calibration accuracy. To address these issues, the random forest algorithm and a spectral interpolation convolution method using the Sentinel-2/multispectral instrument (MSI) are proposed in this study, in which the HuanJing-2A (HJ-2A)/charge-coupled device (CCD3) sensor is taken as an example, and the Dunhuang radiometric calibration site (DRCS) is used as a radiometric delivery platform. Firstly, a BRDF model by using the random forest algorithm of the DRCS is constructed using time-series MODIS images, which corrects the viewing geometry difference. Secondly, the BRDF correction coefficients, MSI reflectance, and relative spectral responses (RSRs) of CCD3 are used to correct the spectral differences. Finally, with the validation results, the maximum relative error between the calibration results of the proposed method and the official calibration coefficients (OCCs) published by the China Centre for Resources Satellite Data and Application (CRESDA) is 3.38%. When tested using the Baotou sandy site, the proposed method is better than the OCCs of the average relative errors calculated for all the bands except for the near-infrared (NIR) band, which has a larger error. Additionally, the effects of the light-matching method and the radiative transfer method, different approaches to constructing the BRDF model, using SBAF to account for spectral differences, different BRDF sources, as well as the imprecise viewing geometrical parameters, spectral interpolation method, and geometric positioning error, on the calibration results are analyzed. Results indicate that the cross-calibration coefficients obtained using the random forest algorithm and the proposed spectral interpolation method are more applicable to the CCD3; thus, they also account for the nonlinear relationships between the kernel models and reduce the error due to the radiative transfer model. The total uncertainty of the proposed method in all bands is less than 5.16%.
- 20 November 2024
- Published by MDPI AG in Remote Sensing
- Vol. 16 (22) , 4337
Open AccessRadiometric Cross-Calibration of HJ-2A/CCD3 Using the Random Forest Algorithm and a Spectral Interpolation Convolution Method with Sentinel-2/MSI
In the process of radiometric calibration, the corrections for bidirectional reflectance distribution functions (BRDFs) and spectral band adjustment factors (SBAFs) are crucial. Time-series MODIS images are commonly used to construct BRDFs by using the Ross–Li model in current research. However, the Ross–Li BRDF model is based on the linear relationship between the kernel models and is unable to take into account the nonlinear relationship between them. Furthermore, when using SBAF to account for spectral difference, a radiative transfer model is often used, but it requires many parameters to be set, which may introduce more errors and reduce the calibration accuracy. To address these issues, the random forest algorithm and a spectral interpolation convolution method using the Sentinel-2/multispectral instrument (MSI) are proposed in this study, in which the HuanJing-2A (HJ-2A)/charge-coupled device (CCD3) sensor is taken as an example, and the Dunhuang radiometric calibration site (DRCS) is used as a radiometric delivery platform. Firstly, a BRDF model by using the random forest algorithm of the DRCS is constructed using time-series MODIS images, which corrects the viewing geometry difference. Secondly, the BRDF correction coefficients, MSI reflectance, and relative spectral responses (RSRs) of CCD3 are used to correct the spectral differences. Finally, with the validation results, the maximum relative error between the calibration results of the proposed method and the official calibration coefficients (OCCs) published by the China Centre for Resources Satellite Data and Application (CRESDA) is 3.38%. When tested using the Baotou sandy site, the proposed method is better than the OCCs of the average relative errors calculated for all the bands except for the near-infrared (NIR) band, which has a larger error. Additionally, the effects of the light-matching method and the radiative transfer method, different approaches to constructing the BRDF model, using SBAF to account for spectral differences, different BRDF sources, as well as the imprecise viewing geometrical parameters, spectral interpolation method, and geometric positioning error, on the calibration results are analyzed. Results indicate that the cross-calibration coefficients obtained using the random forest algorithm and the proposed spectral interpolation method are more applicable to the CCD3; thus, they also account for the nonlinear relationships between the kernel models and reduce the error due to the radiative transfer model. The total uncertainty of the proposed method in all bands is less than 5.16%.
- Open Access
- 31 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 17 (19391404) , 10979-10997
Spatiotemporal Evolution and Driving Mechanism of Fractional Vegetation Coverage in the Yangtze River Delta
An in-depth exploration of fractional vegetation coverage (FVC) changes and driving mechanisms in the Yangtze River Delta (YRD) is crucial for maintaining regional ecological health and achieving sustainable development. We therefore calculate FVC in the YRD from 2012 to 2021 based on MODIS NDVI data, and analyze its spatiotemporal evolution. Multiple regression residual analysis and geographic detector model were used along with various auxiliary data to further explore its driving mechanisms in a hierarchical manner. Finally, the Hurst index was used to forecast future trends in FVC. The results show that: (1) Significant changes in FVC occurred around 2016, rapidly declining at a rate of 8.9×10 -3 a -1 from 2012 to 2016, followed by fluctuating growth at a rate of 5.2×10 -3 a -1 thereafter. (2) Although the overall development of FVC in the YRD tends toward stability, the fluctuation was pronounced in the Taihu Lake Basin. Improvement areas were mainly concentrated on both sides of the Yangtze River in the central part of the YRD and in the southern mountainous region. Degraded areas were concentrated in cities north of the Huai River. (3) Dynamic changes in FVC were primarily driven by a combination of climate and human activities, whereas spatial heterogeneity was mainly driven by factors such as elevation, slope, and landform type. The improvement in the explanatory power of anthropogenic factors for spatial heterogeneity when combined with natural factors was significant.
- 31 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 17 (19391404) , 10979-10997
Open AccessSpatiotemporal Evolution and Driving Mechanism of Fractional Vegetation Coverage in the Yangtze River Delta
An in-depth exploration of fractional vegetation coverage (FVC) changes and driving mechanisms in the Yangtze River Delta (YRD) is crucial for maintaining regional ecological health and achieving sustainable development. We therefore calculate FVC in the YRD from 2012 to 2021 based on MODIS NDVI data, and analyze its spatiotemporal evolution. Multiple regression residual analysis and geographic detector model were used along with various auxiliary data to further explore its driving mechanisms in a hierarchical manner. Finally, the Hurst index was used to forecast future trends in FVC. The results show that: (1) Significant changes in FVC occurred around 2016, rapidly declining at a rate of 8.9×10 -3 a -1 from 2012 to 2016, followed by fluctuating growth at a rate of 5.2×10 -3 a -1 thereafter. (2) Although the overall development of FVC in the YRD tends toward stability, the fluctuation was pronounced in the Taihu Lake Basin. Improvement areas were mainly concentrated on both sides of the Yangtze River in the central part of the YRD and in the southern mountainous region. Degraded areas were concentrated in cities north of the Huai River. (3) Dynamic changes in FVC were primarily driven by a combination of climate and human activities, whereas spatial heterogeneity was mainly driven by factors such as elevation, slope, and landform type. The improvement in the explanatory power of anthropogenic factors for spatial heterogeneity when combined with natural factors was significant.
- Open Access
- 20 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 17 (19391404) , 10380-10389
Remote Sensing Inversion of the Total Suspended Matter Concentration in the Nanyi Lake Based on Sentinel-3 OLCI Imagery
Herein, in situ water reflectance and TSM data obtained from several experiments on the Nanyi Lake from 2018 to 2022 and the Sentinel-3 OLCI satellite synchronization data were used to compare four atmospheric correction methods (FLAASH, 6S, ACOLITE, and C2RCC) and construct an empirical model for TSM inversion in the Nanyi Lake to analyze the spatial and temporal changes in the water quality in the Nanyi Lake from 2018 to 2023. On the Sentinel-3 OLCI data, the C2RCC algorithm showed the highest accuracy and overall performance stability (RMSE: 0.0014–0.0051 Sr −1 , MAPE: 18.44%–68.47%, and BIAS: from −3.68% to 23.63%). The highest correlation was observed between the three-band ratio (B9 + B18)/B10 and the in situ TSM; the TSM inversion model constructed based on this inversion factor showed the best accuracy for the Nanyi Lake (R 2 : 0.76, RMSE: 5.01 mg/L, and MAPE: 28.46%). The spatial and temporal changes in TSM in the Nanyi Lake exhibited significant regularity. Specifically, the TSM was higher in 2018–2019, significantly decreased in 2020, and stabilized in 2021–2023. Owing to the effects of human activities, precipitation, and illumination, seasonal variation in the TSM in the Nanyi Lake was detected, with TSM decreasing in the following order: summer > autumn > spring > winter. Concerning spatial variations, high TSM was observed in the northwest, northeast, and southeast of the Nanyi Lake reclamation area and its surrounding lake area. River confluence and human activities affected the area, leading to significant fluctuations in TSM in 2018–2023.
- 20 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 17 (19391404) , 10380-10389
Open AccessRemote Sensing Inversion of the Total Suspended Matter Concentration in the Nanyi Lake Based on Sentinel-3 OLCI Imagery
Herein, in situ water reflectance and TSM data obtained from several experiments on the Nanyi Lake from 2018 to 2022 and the Sentinel-3 OLCI satellite synchronization data were used to compare four atmospheric correction methods (FLAASH, 6S, ACOLITE, and C2RCC) and construct an empirical model for TSM inversion in the Nanyi Lake to analyze the spatial and temporal changes in the water quality in the Nanyi Lake from 2018 to 2023. On the Sentinel-3 OLCI data, the C2RCC algorithm showed the highest accuracy and overall performance stability (RMSE: 0.0014–0.0051 Sr −1 , MAPE: 18.44%–68.47%, and BIAS: from −3.68% to 23.63%). The highest correlation was observed between the three-band ratio (B9 + B18)/B10 and the in situ TSM; the TSM inversion model constructed based on this inversion factor showed the best accuracy for the Nanyi Lake (R 2 : 0.76, RMSE: 5.01 mg/L, and MAPE: 28.46%). The spatial and temporal changes in TSM in the Nanyi Lake exhibited significant regularity. Specifically, the TSM was higher in 2018–2019, significantly decreased in 2020, and stabilized in 2021–2023. Owing to the effects of human activities, precipitation, and illumination, seasonal variation in the TSM in the Nanyi Lake was detected, with TSM decreasing in the following order: summer > autumn > spring > winter. Concerning spatial variations, high TSM was observed in the northwest, northeast, and southeast of the Nanyi Lake reclamation area and its surrounding lake area. River confluence and human activities affected the area, leading to significant fluctuations in TSM in 2018–2023.
- Open Access
- 20 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 17 (19391404) , 10422-10431
Radiometric Cross Calibration of HY-1C/COCTS Based on Sentinel-3/OLCI
The on-orbit radiometric calibration of spaceborne sensors is the foundation of quantitative remote sensing, and the calibration accuracy directly affects the quality of quantitative remote sensing products. The wide swath of the Chinese ocean color and temperature scanner (COCTS) onboard the HY-1C satellite makes it difficult to ignore errors caused by viewing angles during calibration. Thus, this paper proposes a cross-calibration method based on the bottom-of-atmosphere (BOA) and top-of-atmosphere (TOA) spectral band adjustment factors (SBAFs). This method cross-calibrates the COCTS sensor after correcting viewing geometry and radiometric differences. It is based on the Sentinel-3/ocean and land color instrument (OLCI) sensor. First, time-series data from the OLCI sensor were used to select calibration points in the Dunhuang area. Subsequently, the bidirectional reflectance distribution function (BRDF) for each corresponding spectral band of the OLCI sensor was constructed point by point. Next, the BOA and TOA SBAFs were calculated using the interpolated continuous spectra obtained from MOD09GA products. After correcting for the BRDF and SBAF, cross-calibration between COCTS and OLCI was achieved. The results showed that the BOA SBAF model achieved higher precision calibration coefficients than the TOA SBAF model, with errors in each band below 5.76%. The proposed method can provide technical support for the cross-calibration of wide-swath sensors.
- 20 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 17 (19391404) , 10422-10431
Open AccessRadiometric Cross Calibration of HY-1C/COCTS Based on Sentinel-3/OLCI
The on-orbit radiometric calibration of spaceborne sensors is the foundation of quantitative remote sensing, and the calibration accuracy directly affects the quality of quantitative remote sensing products. The wide swath of the Chinese ocean color and temperature scanner (COCTS) onboard the HY-1C satellite makes it difficult to ignore errors caused by viewing angles during calibration. Thus, this paper proposes a cross-calibration method based on the bottom-of-atmosphere (BOA) and top-of-atmosphere (TOA) spectral band adjustment factors (SBAFs). This method cross-calibrates the COCTS sensor after correcting viewing geometry and radiometric differences. It is based on the Sentinel-3/ocean and land color instrument (OLCI) sensor. First, time-series data from the OLCI sensor were used to select calibration points in the Dunhuang area. Subsequently, the bidirectional reflectance distribution function (BRDF) for each corresponding spectral band of the OLCI sensor was constructed point by point. Next, the BOA and TOA SBAFs were calculated using the interpolated continuous spectra obtained from MOD09GA products. After correcting for the BRDF and SBAF, cross-calibration between COCTS and OLCI was achieved. The results showed that the BOA SBAF model achieved higher precision calibration coefficients than the TOA SBAF model, with errors in each band below 5.76%. The proposed method can provide technical support for the cross-calibration of wide-swath sensors.
- Open Access
- 8 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 17 (19391404) , 8291-8301
Accuracy Evaluation of Four Spatiotemporal Fusion Methods for Different Time Scales
Numerous spatiotemporal fusion (STF) methods have been developed to generate surface reflectance data with high spatial and temporal resolutions for dynamic monitoring. Although comparative studies have been conducted to assess various fusion methods, selecting the most suitable fusion method for acquiring long-term time series data remains a challenge. This article compared four representative STF methods based on the effect of 8 × n -day ( n = 1, 2, …, 7) time scales between base and predicted data. These methods included the spatial and temporal adaptive reflectance fusion model (STARFM), flexible spatiotemporal data fusion (FSDAF), enhanced STARFM (ESTARFM), and sensor-bias driven spatio-temporal fusion model (BiaSTF). Accuracy was assessed using metrics such as the root-mean-square error, correlation coefficients, erreur relative globale adimensionnelle de synthèse, and spectral angle mapper. The results indicate that as the time scale increases, fusion accuracy decreases, with a significant drop observed at the 40-day mark. Compared with the 8-day scale, at the 40-day scale, the ERGAS of STARFM decreased by 20.66%, that of FSDAF by 17.00%, that of ESTARFM by 14.37%, and that of BiaSTF by 11.48%. Furthermore, STF methods based on two pairs of images demonstrate a notable advantage in capturing data from distant temporal phases. In regions with pronounced phenological changes and longer time scales, BiaSTF consistently exhibits the best fusion performance (ERGAS = 1.67), followed by ESTARFM (ERGAS = 1.85). These findings can aid in determining the most suitable STF methods and provide guidelines for the development of new methods.
- 8 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 17 (19391404) , 8291-8301
Open AccessAccuracy Evaluation of Four Spatiotemporal Fusion Methods for Different Time Scales
Numerous spatiotemporal fusion (STF) methods have been developed to generate surface reflectance data with high spatial and temporal resolutions for dynamic monitoring. Although comparative studies have been conducted to assess various fusion methods, selecting the most suitable fusion method for acquiring long-term time series data remains a challenge. This article compared four representative STF methods based on the effect of 8 × n -day ( n = 1, 2, …, 7) time scales between base and predicted data. These methods included the spatial and temporal adaptive reflectance fusion model (STARFM), flexible spatiotemporal data fusion (FSDAF), enhanced STARFM (ESTARFM), and sensor-bias driven spatio-temporal fusion model (BiaSTF). Accuracy was assessed using metrics such as the root-mean-square error, correlation coefficients, erreur relative globale adimensionnelle de synthèse, and spectral angle mapper. The results indicate that as the time scale increases, fusion accuracy decreases, with a significant drop observed at the 40-day mark. Compared with the 8-day scale, at the 40-day scale, the ERGAS of STARFM decreased by 20.66%, that of FSDAF by 17.00%, that of ESTARFM by 14.37%, and that of BiaSTF by 11.48%. Furthermore, STF methods based on two pairs of images demonstrate a notable advantage in capturing data from distant temporal phases. In regions with pronounced phenological changes and longer time scales, BiaSTF consistently exhibits the best fusion performance (ERGAS = 1.67), followed by ESTARFM (ERGAS = 1.85). These findings can aid in determining the most suitable STF methods and provide guidelines for the development of new methods.
- Open Access
- 22 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 17 (19391404) , 5517-5526
Adaptation Analysis of Measurement Techniques and Inversion Algorithms for Tea Tree LAI
The leaf area index (LAI) is one of the most important biophysical parameters of vegetation canopy, which is of great significance for estimating the growth and yield of tea trees. In the present era where tea plantations are becoming increasingly densely packed. However, there is a lack of accurate methods for measuring the LAI of densely planted tea trees. To explore LAI measurement and inversion methods applicable to densely planted tea trees, this study used tea trees in Langxi County as a case study. Using two commonly used measurement methods for densely and sparsely grown row crops and a measurement method for densely grown tea trees proposed based on practice, three sets of tea tree LAI were measured and compared with the true LAI value obtained using direct measurements. Using the set with the best performance to construct a regression model with vegetation indices, the leaf area index during the new shoot period of tea leaves is inverted. The results are summarized as follows. (1) According to the analysis of the direct measurements, the proposed measurement method for densely grown tea trees the closest LAI values to the true values for densely planted tea trees in Langxi. (2) According to the fitting analysis, the common vegetation indices were significantly correlated with the LAI. The vegetation indices constructed with green, red edge and shortwave infrared bands exhibited a higher correlation with the LAI than those constructed without these bands. Among them, EVIre exhibited the highest fitting accuracy.
- 22 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 17 (19391404) , 5517-5526
Open AccessAdaptation Analysis of Measurement Techniques and Inversion Algorithms for Tea Tree LAI
The leaf area index (LAI) is one of the most important biophysical parameters of vegetation canopy, which is of great significance for estimating the growth and yield of tea trees. In the present era where tea plantations are becoming increasingly densely packed. However, there is a lack of accurate methods for measuring the LAI of densely planted tea trees. To explore LAI measurement and inversion methods applicable to densely planted tea trees, this study used tea trees in Langxi County as a case study. Using two commonly used measurement methods for densely and sparsely grown row crops and a measurement method for densely grown tea trees proposed based on practice, three sets of tea tree LAI were measured and compared with the true LAI value obtained using direct measurements. Using the set with the best performance to construct a regression model with vegetation indices, the leaf area index during the new shoot period of tea leaves is inverted. The results are summarized as follows. (1) According to the analysis of the direct measurements, the proposed measurement method for densely grown tea trees the closest LAI values to the true values for densely planted tea trees in Langxi. (2) According to the fitting analysis, the common vegetation indices were significantly correlated with the LAI. The vegetation indices constructed with green, red edge and shortwave infrared bands exhibited a higher correlation with the LAI than those constructed without these bands. Among them, EVIre exhibited the highest fitting accuracy.