VVVicente Melo Velasco

Vicente Melo Velasco

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Vicente Melo Velasco has a total of 19 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Constraining debris input to Oberaletsch Glacier using ensemble-based Lagrangian modelling

    by José M. Muñoz-Hermosilla, Evan Miles, Michael McCarthy, Vicente Melo Velasco, Florian Hardmeier, Prateek Gantayat, Adrià Fontrodona-Bach, Guillaume Jouvet, Francesca Pellicciotti

    Debris-covered glaciers play an important role in alpine hydrology, yet the origin and transport pathways of debris within the glacier remain difficult to constrain. This is a major limitation in glacier evolution models, many of which have tended to ignore debris transient effects, especially for assessment of catchment hydrological processes. Supraglacial debris coverage is an integrated signal of debris supply, climate forcing, glacier geometry and debris physical properties, all of which vary in time, resulting in a complex inverse problem for model-based reconstructions.Here, we apply the Instructed Glacier Model (IGM) with a newly implemented Lagrangian debris transport module combined with an ensemble of climate forcing, to explore constraints on debris input at Oberaletsch Glacier in the Swiss Alps. This framework allows debris particles to be tracked within a dynamically evolving glacier geometry and enables a likelihood-based assessment of inferred debris source regions across the ensemble. Rather than seeking a unique reconstruction, we identify spatially persistent and statistically robust seeding areas that are compatible with the observed historical evolution of debris extent derived from debris-cover maps for 1965, 1985, 1995, 2000, 2010 and 2015. These areas are identified by tracing debris particles backward from their final positions within the observed debris-covered zone to their upstream seeding locations.Our results show that our inverse filtering strategy effectively identifies potential debris input zones that are primarily controlled by glacier dynamics and geometry. Notably, including or excluding the effect of debris on surface mass balance does not significantly alter the reconstructed debris extent in the ablation zone, highlighting the dominant role of ice flow in shaping supraglacial debris patterns at glacier scale. The reconstructed debris input patterns allow us to reproduce the observed historical evolution of debris extent and glacier geometry with good agreement. Debris extent matching between simulations and observations reaches around 80%, while the percentage of the total particles ending up in the target debris area remains above 70%. Ongoing work addresses the reconstruction of debris thickness, which is sensitive to both the debris weight (i.e. the assigned debris volume) prescribed for each particle and, crucially, the climatic forcing, requiring an iterative approach to capture the full transient characteristics of the glacier debris cover.This study demonstrates that ensemble-based Lagrangian modelling provides a powerful framework to constrain debris input to glaciers. By explicitly coupling debris transport to the evolving glacier dynamics, this approach opens new perspectives for interpreting present-day debris cover and for projecting the future evolution of debris-covered glaciers under changing climatic conditions.

  • Open Access

    Glacio-hydrological modelling of the Aletschgletscher catchment with evolving supraglacial debris since 19

    by Vicente Melo-Velasco, Thomas Shaw, Michael McCarthy, Catriona Fyffe, Evan Miles, José Manuel Muñoz Hermosilla, Adrià Fontrodona-Bach, Prateek Gantayat, Achille Jouberton, Francesca Pellicciotti

    Supraglacial debris partially covers more than 40% of Earth’s glaciers (excluding Antarctica) and, where present, acts as a major controlling factor for glacier melt. It can enhance melt when the layer is thin by reducing surface albedo (increasing the net radiative flux) and it reduces melt when it is thick by insulating the ice from the atmosphere (dampening the conductive heat flux). Accurately simulating the spatio-temporal evolution of debris over a glacier is still a challenge, because of diverse debris sources and mechanisms of transport on and within the ice that affect long-term debris cover evolution. Previous studies have investigated the evolution of debris from geomorphological and historical data or from debris-tracking ice dynamics modelling. These approaches, however, often do not capture the transient ice melt-debris thickness relationship under a changing climate. To date, no attempt has been made to couple the century-scale evolution of debris extent and thickness with a full surface energy-balance model to evaluate debris-melt feedbacks and assess their impacts on catchment-scale runoff generation.We apply a distributed land surface-energy balance model to simulate the glacier evolution and surface hydrology of the Aletschgletscher catchment (including glaciated and ice-free areas) in the Swiss Alps from 1900 to 2023. We incorporate the evolution of supraglacial debris, constrained using historical topographic maps and recent debris thickness measurements. We evaluate the impact that time-evolving debris-cover extent and thickness has on the glacier mass balance and hydrology. We also compare results for Grosser Aletsch and Oberaletsch to demonstrate that increasing catchment debris cover influences catchment response to climate and glacier change.Our results show that the contribution of sub-debris melt to runoff varied substantially over the last century. The catchment-wide sub-debris melt contribution increased until ~1945, then declined until today. However, trends differed between subcatchments. In the sparsely debris-covered Grosser Aletschgletscher, sub-debris melt reached its peak around 1940 (25–30% of total ice melt) before decreasing until present (same pattern as the entire catchment). In contrast, the highly debris-covered Oberaletsch shows a continuous increase, with recent values reaching 40–50% without a clear peak. The catchment trend is primarily explained by the evolution of debris cover on Grosser Aletschgletscher, combined with climate factors. Periods of expanding debris extent (~1910–1930 and ~1940–1965) initially increased the sub-debris melt contribution by enlarging the area where melt is enhanced by thin debris. Once debris area stabilised and average thickness increased (post-~1965), the stronger insulating effect reduced its relative contribution. An early rapid thinning of debris (~1910–1920) further enhanced early melt. Furthermore, climate warming has raised the 0°C isotherm, increasing melt in debris-free areas and thereby relatively reducing the proportion of melt occurring under debris. Therefore, the sub-debris melt contribution is affected by the combination between debris evolution and climate change. In a world with darkening glaciers, it is essential for glacio-hydrological models to consider evolving debris extent and thickness, and to incorporate feedbacks related to these changes, which substantially impact the surface energy balance, in order to accurately project future runoff from these catchments.

  • Open Access

    Modelling the impact of an evolving supraglacial debris cover on the future evolution of glaciers in a changing climate

    by Prateek Gantayat, Evan S Miles, Achille Jouberton, Jose Manuel Munoz, Vicente Melo Velasco, Adria Fontrodona Bach, Michael McCarthy, Francesca Pellicciotti

    Recent climate warming has increased the extent of debris cover on mountain glaciers. A thicker debris cover tends to shield the glacier surface from melting whereas a thinner/ patchy debris cover can amplify surface melting, with consequences for glacier dynamics and evolution. Most modelling studies that have estimated glacier evolution at a regional scale either a) do not consider the impact of debris cover at all or, b) assume a temporally static debris cover. Some major advances have been achieved in a recent study that accounted for the impact of evolving debris cover on future evolution of glaciers with an aerial extent > 1 km2 in High Mountain Asia; however, limitations remained related to the parameterised relationships between debris cover area and thickness changes. Alternatively, debris-explicit ice flow models exist, but are not suitable for regional or global scales due to the data inputs and spin-up period. As such, a gap exists for an approach to model dynamic debris that is physics-based but simple to implement in large-scale glacier models. To address this gap, we present a 1D numerical ice-flow model based on the Shallow Ice Approximation (SIA) that includes coupled sub-modules which explicitly evolve the debris cover and thickness using principles of mass conservation and a degree day approach for estimating surface mass balance. It uses freely available data namely ERA-5 daily data of temperature and precipitation, glacier geodetic mass balances, historic satellite-derived supraglacial debris cover, glacier surface elevation and glacier surface velocities as inputs. The debris extent/thickness module is easily calibrated; dependent on the mass balance parameters and does not lead to the problem of equifinality of parameter sets. We demonstrate the model over four debris-covered glaciers located in the Central European Alps (Oberaletsch, Zmutt, Pasterze and Miage glaciers), where present-day debris thickness data are available. Results from the historic simulations show that the model was able to estimate the distribution of debris thickness within an RMSE ~ 0.07 m. In addition to that, the modelled evolution of the debris cover area fraction (i.e., the fraction of the glacier area covered by debris in a 10-m surface elevation band) was also in good agreement with that measured with maximum RMSE of ~8% per elevation band. The future evolution of these glaciers was carried out by forcing the ice-flow model with CMIP6 derived SSP2-4.5 and SSP5-8.5 climate scenarios, and highlighting the process of tongue detachment from headwall mass supply areas in the 21st century. Future simulations revealed that these test glaciers would be nearly completely covered with debris by the end of the 21st century with debris thicknesses becoming at least twice as compared to the present state. In addition to that, these glaciers are also expected to break into fragments with the tongues getting detached from the main glacier. Overall, the coupled model is easy to apply, computationally fast and is currently being used to study the impact of an evolving debris cover on glacier evolution, in the Central European Alps, under different climate scenarios.

  • Open Access

    DebDaB: a database of supraglacial debris thickness and physical properties

    by Adrià Fontrodona-Bach, Lars Groeneveld, Evan Miles, Michael McCarthy, Thomas Shaw, Vicente Melo Velasco, Francesca Pellicciotti

    Rocky debris covers around 7.3 % of the global glacier area, influencing ice melt rates and the surface mass balance of glaciers, making the dynamics and hydrology of debris-covered glaciers distinct from those of clean-ice glaciers. Accurate representation of debris in models is challenging, as measurements of the physical properties and thickness of the supraglacial debris layer are scarce. Here, we compile a database of measured and reported bulk physical properties and layer thicknesses of supraglacial debris that we call the supraglacial Debris Database (DebDaB) and that is open to community submissions. The majority of the database (90 %) is compiled from 172 sources in the literature, and the remaining 10 % was previously unpublished. DebDaB contains 8741 data entries for supraglacial debris layer thickness, of which 1770 entries also include sub-debris ablation rates, 179 thermal conductivity of debris, 160 aerodynamic surface roughness length, 79 debris albedo, 59 debris emissivity, and 37 debris porosity. The data are distributed over 84 glaciers in 13 regions in the Global Terrestrial Network for Glaciers. We show regional differences in the distribution of debris thickness measurements in DebDaB and fit simplified Østrem curves to 19 glaciers with sufficient debris thickness and ablation data. The data in DebDaB can be used for energy balance, melt, and surface mass balance studies by incorporating site-specific debris properties or for evaluation of remote sensing estimates of debris thickness and surface roughness. They can also help future field campaigns on debris-covered glaciers by identifying observation gaps. DebDaB's uneven spatial coverage points to sampling biases in community efforts to observe debris-covered glaciers, with some regions (e.g. central Europe and South Asia) well-sampled but others having gaps with prevalent debris (e.g. the Andes and Alaska). Debris thickness measurements are mostly concentrated at lower elevations, leaving higher-elevation debris-covered areas undersampled and suggesting that our knowledge of debris properties might not be representative of all elevations. The aims of DebDaB, as an openly available dataset, are to evolve over time, to be updated, and to add to community submissions as new data on supraglacial properties become available. The data described in this paper can be accessed from Zenodo at https://doi.org/10.5281/zenodo.14224835 (Groeneveld et al., 2025).


  • Open Access

    Method Dependence in Thermal Conductivity and Aerodynamic Roughness Length Estimates on a Debris‐Covered Glacier

    by Vicente Melo‐Velasco, Evan Miles, Michael McCarthy, Thomas E. Shaw, Catriona Fyffe, Adrià Fontrodona‐Bach, Francesca Pellicciotti

    Rock debris partially covers glaciers worldwide, with varying extents and distributions, and controls sub‐debris melt rates by modifying energy transfer from the atmosphere to the ice. Two key physical properties controlling this energy exchange are thermal conductivity and aerodynamic roughness length . Accurate representation of these properties in energy‐balance models is critical for understanding climate‐glacier interactions and predicting the behavior of debris‐covered glaciers. However, and have been derived at very few sites from limited local measurements, using different approaches, and most model applications rely on values reported from these few sites and studies. We derive and using established and modified approaches from data at three locations on Pirámide Glacier in the central Chilean Andes. By comparing methods and evaluating melt simulated with an energy‐balance model, we reveal substantial differences between approaches. These lead to discrepancies between ice melt from energy‐balance simulations and observed data, and highlight the impact of method choice on calculated ice melt. Optimizing against measured melt appears a viable approach to constrain melt simulations. Determining seems less critical, as it has a smaller impact on total melt. Profile aerodynamic method measurements for estimating , despite higher costs, are independent of ice melt calculations. The large, unexpected differences between methods indicate a substantial knowledge gap. The fact that field‐derived and fail to work well in energy‐balance models, suggests that model values represent bulk properties distinct from theoretical field measurements. Addressing this gap is essential for improving glacier melt predictions.


  • Open Access

    Inferring Debris Properties on Debris-Covered Glaciers: Implications for Glacier Modelling

    by Vicente Melo Velasco, Evan Miles, Michael McCarthy, Thomas E. Shaw, Catirona Fyffe, Francesca Pellicciotti

    Debris, ranging from thin surface dust to medial moraines and thick, continuous layers in ablation zones, partially covers glaciers all around the world. By modifying energy transfer from the atmosphere to the ice, the supraglacial debris layer fundamentally controls sub-debris melt rates. Debris physical properties such as surface roughness (z0) and thermal conductivity (k) have only been derived from local measurements at a few sites, and modelling studies of debris-covered glaciers have often relied on literature values. The correct representation of these properties in energy-balance models is crucial for understanding the climate-glacier dynamics and how debris-covered glaciers will behave in the future. There are several established methods to derive these properties from field measurements, yet relatively few studies undertake to measure properties for their sites, or to evaluate the resulting property values.We undertook an observational campaign to investigate supraglacial debris properties at Pirámide Glacier, in the central Chilean Andes. First, we used established approaches, as well as some variations on those approaches, to derive z0 from wind-temperature tower data and k from thermistor strings in the debris at three glacier locations. Second, we determined locally-optimal k and z0 values to reproduce observed ice melt: we optimised k by simulating energy conduction through the debris with the surface temperature as an input, then optimised z0 by running a complete energy-balance model using the observed surface meteorology. We then conducted point-scale energy-balance modelling using the z0 and k values obtained i) with the derivations from field measurements; ii) through optimisation, or; iii) from the typical values found in literature. This allowed us to evaluate how the different methods perform by comparing the modelled and measured ice melt. Our results show that deriving local debris properties from measurements is challenging and that measured values can differ significantly from common literature values. The values derived from measured data can vary significantly depending on the method employed. It is important to note that these values can also differ significantly from the values required by an energy-balance model to accurately represent sub-debris ice melt. Furthermore, energy-balance models typically assume a representation of heat transfer within the supraglacial debris layer based solely on conduction and require a bulk thermal conductivity value. This highlights the necessity of efforts to reevaluate measurements in the field and reconsider our definition of debris properties in melt modelling.

  • Open Access

    Inferring Debris Properties on Debris-Covered Glaciers

    by Vicente Melo Velasco, Evan S Miles, Michael McCarthy, Thomas Edward Shaw, Catriona Lousie Fyffe, Adrià Fontrodona Bach, Francesca Pellicciotti

    Debris covers glaciers worldwide and controls sub-debris melt rates by modifying energy transfer from the atmosphere to the ice. Physical properties like thermal conductivity (k) and surface roughness (z0) have been derived from limited local measurements, with models often relying on literature values from a few sites and studies. Accurate representation of these properties in energy-balance models is crucial for understanding climate-glacier interactions and predicting future behaviour of debris-covered glaciers. We studied these properties using established and modified approaches to derive k and z0 from field data at three locations on Pirámide Glacier in the central Chilean Andes. We compared existing methods and evaluated the modelled melt using these values. Our study reveals substantial inconsistencies between methods, leading to discrepancies between ice melt from energy-balance simulations and observed data, highlighting the impact of method choice on calculated ice melt. For energy-balance modelling, optimising k against measured ice melt appears a viable method to constrain melt simulations. Determining z0 is less critical due to its smaller impact on total ice melt, and profile aerodynamic method measurements, despite higher economic costs, are independent of ice melt calculations. The large, unexpected differences between existing methods indicate a substantial knowledge gap that the community should address. Values of k and z0 from field measurements do not work well when used in energy-balance models, suggesting that model values are bulk properties that do not necessarily correspond to field-derived values from theoretical approaches.