RLRodrigo Lustosa

Rodrigo Lustosa

*This is an algorithmically generated author record based on publicly available information.

Rodrigo Lustosa has a total of 13 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Relationships between surface urban heat island and vegetation across a regional climatic gradient: the case of southeastern Brazil

    by Ana Kellen Nogueira Campelo, Humberto Ribeiro da Rocha, Denise Helena Silva Duarte, Rodrigo Lustosa

  • Open Access

    Modeling the Thermal Impact of a Highway on Its Surroundings Using PALM: A Case Study in the Atlantic Rainforest, Brazil

    by Rodrigo Lustosa, Luis Fernando Camponogara, Humbero da Rocha, Björn Maronga, Johannes Schwenkel, Felipe Costa

    The near-surface air temperature (Ta) is largely driven by surface temperature (TS), which depends on the surface energy balance and is strongly influenced by surface material properties. While TS can be estimated globally from satellite observations at high spatial resolution, Ta is typically measured only at weather stations, resulting in limited spatial coverage. Consequently, many studies use TS in place of Ta when a high spatial resolution is needed (e.g., at the city scale), although their spatial patterns differ and their physical relationships are not fully characterized. Previous studies using Landsat-derived TS (30 m resolution) have shown that surface changes can affect the surrounding thermal environment, with significant TS anomalies extending up to 168 m into adjacent undisturbed areas. One notable case is a highway constructed in 2013 across the dense Atlantic Rainforest in southeastern Brazil, where TS increases extended asymmetrically into the forest, reaching up to 128 m on one side of the road and 64 m on the other. This reach and asymmetry were hypothesized to result from warm air advection from the highway into the forest canopy, modulated by the prevailing sea-breeze circulation. In this study, we use the PALM large-eddy simulation model to isolate and test this hypothesis by explicitly simulating the Atlantic Rainforest with and without the highway. Idealized simulations are performed under a mean wind speeds perpendicular to the road axis to assess how the highway modifies air temperature at canopy height and how these effects propagate into the forest on both sides. The simulations show an increase in Ta of more than 1.0°C reaching 50m inside the forest canopy and of 0.5°C reaching 100m. The reach can occur on both sides and are not just driven by the mean wind but also by the increase in soil and leafs exposure to the sun radiation because of vegetation removal. The results provide a mechanistic understanding of how this type of infrastructure can alter the microclimate of protected forested areas and help clarify the relationship between TS-based observations and Ta responses, also providing guidance for the use of Ts when Ta observations are unavailable.

  • Open Access

    Quantifying the Cooling Reach of Urban Vegetation: A Linear Park Case Study in São Paulo

    by Rodrigo Lustosa, Humberto da Rocha

    Cities are generally warmer than their surroundings due to the Urban Heat Island (UHI) effect, which can be intensified during heat waves and lead to reduced labor capacity and increased mortality. Urban vegetation is known to mitigate UHI intensity, but quantifying the cooling impact of different green infrastructures, such as parks or street trees, on urbanized areas remains challenging. The time required for trees to grow is often long enough for substantial urban changes to occur around them, making it difficult to isolate vegetation-driven temperature effects from other factors. Moreover, air temperature (Ta) and surface temperature (TS) play different roles in the energy balance and exhibit distinct spatial patterns, although they are thermodynamically linked through heat exchange. In this study, we assess the impact of a newly implemented linear park in São Paulo, Brazil, on surrounding TS using clear-sky Landsat-derived TS and Normalized Difference Vegetation Index (NDVI) at 10 a.m. (30 m resolution). TS and NDVI were averaged in two decades (1985-1995 and 2015-2025), where trees were planted at the beginning of the first decade and became substantially denser on the latter (NDVI increase up to 0.25), while the adjacent southern urbanized area remained unchanged.A cross-section perpendicular to the park axis was used to quantify the cooling reach, defined as the distance between the last pixel showing a statistically significant NDVI increase and the last pixel with a significant TS decrease. The observed cooling reach was 30 m (one Landsat pixel). This result is compared with three previous case studies in São Paulo that investigated dense vegetation removal, where NDVI changes were stronger (up to 0.50) and warming reaches ranged from 64 to 168 m. Interpreted inversely, as a conceptual restoration of dense vegetation, these values provide an upper benchmark for the potential cooling reach of parks (and the present case study lies within it).Our results indicate that even under favorable conditions, the cooling influence of parks on surrounding urban areas is spatially limited. This suggests that distributed strategies such as street trees and other forms of urban greening may be more effective for reducing overall city temperatures.

  • Open Access

    Integration of temperature data in environmental planning: advances and challenges in São Paulo

    by Luciana Ferreira, Rodrigo Lustosa, Lígia de Jesus, Denise Duarte, Humberto Rocha

    São Paulo, the largest city in the Southern Hemisphere, has increasingly integrated temperature data into its environmental planning, particularly since 2020. This paper examines how the Municipal Secretariat for Environment (SVMA) has incorporated surface temperature data from academic institutions into policy.The Municipal Plan for Green Areas, Protected Areas, and Open Spaces draws on MODIS land surface temperature (LST) data from academic research on the metropolitan region and intends to use it to prioritize vegetation expansion in high-temperature, high-vulnerability areas. The plan mandates annual temperature updates and public dissemination. To advance this effort, in 2023, SVMA partnered with the Institute of Astronomy, Geophysics, and Atmospheric Sciences (IAG-USP) to develop the Municipal Temperature Atlas, analyzing surface and air temperatures using Landsat data (1985–2025). Preliminary results are presented for 2017–2023. Additionally, a collaboration with the Union of Ibero-American Capital Cities (UCCI) enabled the use of microclimate simulations (ENVI-met) to assess both current and future scenarios.Despite these advances, urban planning sectors remain disconnected from climate considerations. While the environmental agency incorporates temperature and vegetation data into decision-making, zoning regulations—such as building height and occupancy rates—continue to neglect climatic factors, potentially undermining environmental progress. São Paulo’s urban model, which promotes dense development and verticalization along transit corridors to reduce car use and emissions, heightens risks in areas with low vegetation cover. Robust thermal data is crucial for revising urban planning tools, supporting environmental education, informing licensing, and strengthening structural measures against heat waves. However, weak institutional coordination across sectors and the persistent misalignment between research timelines and the urgency of political decision-making continue to hinder the full integration of climate-sensitive urban planning.

  • Open Access

    Decadal Analysis of Mean Land Surface Temperature: Adjusting Landsat Data for Temporal Consistency

    by Rodrigo Lustosa, Humberto da Rocha

    Urbanized areas are well-known for being hotter than their surroundings, the Urban Heat Island (UHI) effect. UHI can occur in both the atmosphere and on the surface, with the latter being the main forcing for the former through sensible heat exchange. Land Surface Temperature (LST) can be estimated via remote sensing, offering high spatial resolution but often limited by low temporal resolution and short temporal series. The Landsat satellites (5, 8 and 9) provide the longest consistent LST temporal series (1984–present) with a high spatial resolution (30–120m). However, they have a 16-day revisit time (morning overpass) with data gaps under cloudy conditions, limiting the estimation of reliable monthly and yearly averages. Additionally, Landsat 5 had a non-fixed overpass time, which makes meaningful averages unfeasible. Using the Metropolitan Region of São Paulo, Brazil, as a case study, LST at overpass time was converted to 10:00 AM using an empirically estimated rate of temperature increase under clear-sky conditions. The estimation was made for each pixel using Ordinary Least Squares Method (OLS) and Normalized Difference Vegetation Index (NDVI) and it was compatible with the in situ LST data from the region’s weather station. With that data, decadal averages (1985-1995 to 2015-2025) at 10:00 were estimated using sine/cossine and OLS to account for seasonal discrepancies in sample sizes. Decadal differences were then calculated to estimate the increase/decrease over time. That approach was chosen over linear regression as it is best suited for non-linear changes in LST average, which occur by change in land use. Results show that significant increases (average: +2.5°C/30 years) in LST are mainly associated with urbanization (concentrated in the city’s periphery) and decreases (average: −2.0°C/30 years) are associated with increase in vegetation and/or increase in high-rise buildings (both concentrated in central areas).

  • Open Access

    Quantifying the Spatial Extent of Green Infrastructure’s Cooling Influence in Urban Areas

    by Rodrigo Lustosa, Humberto da Rocha

    Green Infrastructure (GI) is well known for its role in mitigating urban temperatures, but quantifying its effects through measurements remains challenging, particularly in surrounding areas. One major difficulty lies in the fact that, while trees grow slowly and their cooling impact evolves gradually, urbanized areas are heterogeneous and tend to change rapidly, overshadowing GI’s contribution. The Metropolitan Region of São Paulo (RMSP), Brazil, was build in the Atlantic Rainforest biome, a dense and relatively homogeneous forest that exemplifies the best cooling effect GI could achieve. A significant portion of the RMSP remains covered by preserved rainforest. In this study, we analyzed mean Land Surface Temperature (LST) and mean Normalized Difference Vegetation Index (NDVI) over two decades (1985-1995 and 2015-2025), derived from Landsat data (30 m resolution, converted to 10:00 AM), to assess how LST changed in the surroundings of three sites where dense vegetation was removed between decades but that still border a large portion of preserved rainforest. The new land uses are (A) compact low-rise buildings, (B) large low-rise structure, and (C) a highway. For each site, we performed a perpendicular cross-section to the border and computed the distance between the last point with statistically significant NDVI decrease and the last point with significant LST increase over vegetation. The results were (A) 136 m, (B) 168 m, and (C) 128 m to the northwest and 64 m to the southeast (where NDVI increased over vegetation in the last case). These findings provide insight into the maximum extent to which GI influences surrounding LST, considering that restoring land cover to its original state constitutes a GI implementation, with the first-decade mean LST serving as an estimate of its impact, assuming that its spatial influence over a homogeneous forest is similar to that over an urbanized area.Acknowledgments: Fapesp grant 2021/11762-5

  • Open Access

    Estimating air temperature based on satellite surface temperature in the Metropolitan Region of São Paulo

    by Rodrigo Lustosa, Humberto Rocha

    Air and surface temperature are among the most important variables to study the urban climate and are closely linked with thermal comfort and human health. Despite their importance, for now only surface temperature can be estimated by remote sensing, which means that the spatial variability of urban air temperature data can only be studied with a dense set of weather stations, which are expensive and do not yet have a spatial resolution as good as remote sensing. Near-surface air exchanges heat mainly with the surface which suggests that their temperatures could be estimated by each other, but as air is a fluid and moves their relationship is complex, so this estimation cannot yet be done with enough precision. This study aims to help improve the estimation of air temperature with surface temperature using the concept of footprint/source areas, which are the average surface areas that air has most interacted with before reaching the sensor at a weather station. For that, footprint areas were approximated as circles around the weather station. Then, using Landsat 5 and 8 satellites data (which passes around 10 a.m. in local solar time), average surface temperatures at different radii around 51 weather stations at the Metropolitan Region of São Paulo, Brazil, were computed. Then, the Pearson Correlation Coefficient between air and surface temperature was computed for each radius, each weather station and different periods of the year, where the radius with maximum correlation would be an approximation of the true footprint area. The average surface temperature in this area is also a better value for estimating air temperature than the surface temperature in the original Landsat data (100 and 120 metters).