Asma Hmaied
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Asma Hmaied has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Claude Hammecker
Soil-Agrosystem-Hydrosystem interaction lab-LISAH, Place Pierre Viala, 2, 34060 Montpellier, France
4 shared publications - Fethi Lachaal
Georesources Laboratory, Water Research and Technology Centre
2 shared publications A Ben Hassen Trabelsi
Laboratory of Wind Energy Management and Waste Energy Recovery (LMEEVED), Centre of Energy Research and Technology (CRTEn), B.P. 95, Hammam-Lif 2050, Tunisia
1 shared publication- Aïda Ben Hassen Trabelsi
Research and Technology Center of Energy (CRTEn)
1 shared publication C Hammecker
LISAH, Univ Montpellier, INRAE, IRD, Institut Agro Montpellier, Montpellier, France
1 shared publication- Hadhemi Maalaoui1 shared publication
Latest Publications
- Open Access
Biochars Derived from Diverse Local Tunisian Feedstocks for Environmental Remediation: Physicochemical Properties and Adsorption Behaviour
Water resource management and agricultural practices in the Mediterranean region, characterised by the excessive use of pesticides, pose significant environmental and human health challenges. As they can be easily and inexpensively produced from various biomass sources, biochars are frequently recommended as a low-cost secondary decontamination strategy to address soil contamination problems. This study investigates the properties and sorption behaviours of biochars produced in a low-cost metallic kiln using local rosemary, giant reed, St. John’s wort, olive, cypress, and palm tree biomass residues to evaluate their potential for environmental remediation, with a special focus on the mobility and retention of contaminants. Analytical and experimental techniques were employed to characterise the biochars’ physicochemical attributes and sorptive capacities. The core analyses included measurement of basic physicochemical properties, including pH, electrical conductivity, functional group identification via Fourier transform infrared (FTIR) spectroscopy, and the molarity of ethanol droplet (MED) test to assess the surface hydrophobicity. Batch sorption experiments were conducted using methylene blue (MB) and two fluorescent tracers—uranine (UR) and sulforhodamine-B (SRB)—as proxies for organic contaminants to assess the adsorption efficiency and molecule–biochar interactions. Furthermore, the adsorption isotherms at 20 °C were fitted to different models to assess the biochars’ specific surface areas. Thermodynamic parameters were also evaluated to understand the nature and strength of the adsorption processes. The results highlight the influence of feedstock type on the resulting biochar’s properties, thus significantly affecting the mechanism of adsorption. Rosemary biochar was found to have the highest specific surface area (SSA) and cation exchange capacity (CEC), allowing it to adsorb a wide range of organic molecules. Giant reed and palm tree biochars showed similar properties. In contrast, wood-derived biochars generally showed very low SSA, moderate CEC, and low hydrophobicity. The contrasting properties of the three dyes—MB (cationic), UR (anionic), and SRB (zwitterionic)—enabled us to highlight the distinct interaction mechanisms between each dye and the surface functional groups of the different biochars. The reactivity and sorption efficiency of a biochar depend strongly on both the nature of the target molecule and the intrinsic properties of the biochar, particularly its pH. The findings of this study demonstrate the importance of matching biochar characteristics to specific contaminant types for optimised environmental applications, providing implications for the use of tailored biochars in pollutant mitigation strategies.
Open AccessBiochars Derived from Diverse Local Tunisian Feedstocks for Environmental Remediation: Physicochemical Properties and Adsorption Behaviour
Water resource management and agricultural practices in the Mediterranean region, characterised by the excessive use of pesticides, pose significant environmental and human health challenges. As they can be easily and inexpensively produced from various biomass sources, biochars are frequently recommended as a low-cost secondary decontamination strategy to address soil contamination problems. This study investigates the properties and sorption behaviours of biochars produced in a low-cost metallic kiln using local rosemary, giant reed, St. John’s wort, olive, cypress, and palm tree biomass residues to evaluate their potential for environmental remediation, with a special focus on the mobility and retention of contaminants. Analytical and experimental techniques were employed to characterise the biochars’ physicochemical attributes and sorptive capacities. The core analyses included measurement of basic physicochemical properties, including pH, electrical conductivity, functional group identification via Fourier transform infrared (FTIR) spectroscopy, and the molarity of ethanol droplet (MED) test to assess the surface hydrophobicity. Batch sorption experiments were conducted using methylene blue (MB) and two fluorescent tracers—uranine (UR) and sulforhodamine-B (SRB)—as proxies for organic contaminants to assess the adsorption efficiency and molecule–biochar interactions. Furthermore, the adsorption isotherms at 20 °C were fitted to different models to assess the biochars’ specific surface areas. Thermodynamic parameters were also evaluated to understand the nature and strength of the adsorption processes. The results highlight the influence of feedstock type on the resulting biochar’s properties, thus significantly affecting the mechanism of adsorption. Rosemary biochar was found to have the highest specific surface area (SSA) and cation exchange capacity (CEC), allowing it to adsorb a wide range of organic molecules. Giant reed and palm tree biochars showed similar properties. In contrast, wood-derived biochars generally showed very low SSA, moderate CEC, and low hydrophobicity. The contrasting properties of the three dyes—MB (cationic), UR (anionic), and SRB (zwitterionic)—enabled us to highlight the distinct interaction mechanisms between each dye and the surface functional groups of the different biochars. The reactivity and sorption efficiency of a biochar depend strongly on both the nature of the target molecule and the intrinsic properties of the biochar, particularly its pH. The findings of this study demonstrate the importance of matching biochar characteristics to specific contaminant types for optimised environmental applications, providing implications for the use of tailored biochars in pollutant mitigation strategies.
- Open Access
- 1 February 2025
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1455 (1)
Evaluation of biochar amendments to retain organic compounds in soil
The use of biochar is frequently recommended as a low-cost mitigation strategy. Biochar can be easily and inexpensively produced from various agricultural residues. In this study, we produced and evaluated the impact of biochar derived from rosemary, bamboo, St. John’s wort, olive tree wood, cypress, and palm trees on the mobility and retention of emerging contaminants. The initial stage of this work involved the evaluation of the potential retention capacity of various biochars produced in a low-cost metallic kiln using local biomass residues. Methylene blue was used as a proxy for organic contaminants to establish adsorption isotherms and quantify the biochars’ specific surface area and adsorption capacities. Adsorption isotherms at 20°C were fitted to different models to assess their specific surface areas. The results showed that biochars derived from rosemary, giant reed, and St. John’s wort exhibited significant adsorption capacities. Average adsorption capacities for cypress and olive tree were observed, while traditional olive and palm trees showed low adsorption capacities. In the second stage, we evaluated the dynamic retention properties of biochar using soil monolith experiments. We analyse methylene blue (MB) elution curves with and without biochar addition. The presence of biochar in the soil monoliths significantly improved the retention of MB, demonstrating its effectiveness as an adsorbent filter. Specifically, biochar-amended soil monoliths exhibited an increase in MB retention compared to unamended controls. The breakthrough curves showed a delay in the elution of MB of 2,33 pore volumes in biochar-amended monolith increase in sorption capacity. Furthermore, the total recovered MB in the effluent was reduced by 66 % in biochar-treated samples. These quantitative findings underscore the robust potential of biochar for improving water quality by mitigating pollutant transport through the soil. The results suggest that the application of biochar could serve as an effective strategy to reduce agricultural runoff contamination in vulnerable watersheds.
- 1 February 2025
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1455 (1)
Open AccessEvaluation of biochar amendments to retain organic compounds in soil
The use of biochar is frequently recommended as a low-cost mitigation strategy. Biochar can be easily and inexpensively produced from various agricultural residues. In this study, we produced and evaluated the impact of biochar derived from rosemary, bamboo, St. John’s wort, olive tree wood, cypress, and palm trees on the mobility and retention of emerging contaminants. The initial stage of this work involved the evaluation of the potential retention capacity of various biochars produced in a low-cost metallic kiln using local biomass residues. Methylene blue was used as a proxy for organic contaminants to establish adsorption isotherms and quantify the biochars’ specific surface area and adsorption capacities. Adsorption isotherms at 20°C were fitted to different models to assess their specific surface areas. The results showed that biochars derived from rosemary, giant reed, and St. John’s wort exhibited significant adsorption capacities. Average adsorption capacities for cypress and olive tree were observed, while traditional olive and palm trees showed low adsorption capacities. In the second stage, we evaluated the dynamic retention properties of biochar using soil monolith experiments. We analyse methylene blue (MB) elution curves with and without biochar addition. The presence of biochar in the soil monoliths significantly improved the retention of MB, demonstrating its effectiveness as an adsorbent filter. Specifically, biochar-amended soil monoliths exhibited an increase in MB retention compared to unamended controls. The breakthrough curves showed a delay in the elution of MB of 2,33 pore volumes in biochar-amended monolith increase in sorption capacity. Furthermore, the total recovered MB in the effluent was reduced by 66 % in biochar-treated samples. These quantitative findings underscore the robust potential of biochar for improving water quality by mitigating pollutant transport through the soil. The results suggest that the application of biochar could serve as an effective strategy to reduce agricultural runoff contamination in vulnerable watersheds.
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
Direct measurement and indirect estimation of unsaturated soil hydraulic properties in Tunisian soils.
The hydrological cycle is strongly affected by climate changes causing extreme weather events with long drought periods and intense rainfall events. To predict the hydrological functioning of Tunisians catchments, modelling is an essential tool to estimate the consequences on water resources and to test the sustainability of the different land uses. Soil physical properties describing water flow, are therefore essential to feed the models and need to be determined all over the watershed.In order to complete this task, lightweight, cost effective but robust methods are needed. In the present study, both physically based and empirical models or pedo-transfer functions (PTF) have been used to estimate unsaturated soil hydraulic properties based on particles size distribution (PSD), and straightforward in-situ infiltration experiments.The specific Pedo-Transfer Functions (PTFs) embedded within the Rosetta model, the physically grounded Arya-Paris model, and the Beerkan Estimation of Soil Transfer parameters (BEST) have been specifically developed to gauge soil hydraulic parameters based on soil texture, bulk density, and, eventually, outcomes from single-ring infiltration experiments. These models were applied to a diverse array of soil types from both Northern and Central Tunisia, with a subsequent comparative analysis aimed at evaluating their potential applicability and individual performances.Consequently, the estimated parameters derived from these models were incorporated into Hydrus to compute water flow in the vadose zone under the actual weather conditions prevailing in Tunisia. The resultant effects on the calculated water balance, encompassing infiltration, drainage, and runoff, were systematically compared for a comprehensive understanding of their implications.Results show that soil hydraulic parameters determined with different techniques are significantly different. The results for simulated water balance over 3 years, show also differences especially for intense rainfall events. It seems that the BEST method is a valuable technique for estimating soil hydraulic parameters, offering a cost-effective and practical alternative to traditional methods, especially as it leverages on experimental infiltration data.
- 20 January 2025
- Published by Copernicus GmbH
Open AccessDirect measurement and indirect estimation of unsaturated soil hydraulic properties in Tunisian soils.
The hydrological cycle is strongly affected by climate changes causing extreme weather events with long drought periods and intense rainfall events. To predict the hydrological functioning of Tunisians catchments, modelling is an essential tool to estimate the consequences on water resources and to test the sustainability of the different land uses. Soil physical properties describing water flow, are therefore essential to feed the models and need to be determined all over the watershed.In order to complete this task, lightweight, cost effective but robust methods are needed. In the present study, both physically based and empirical models or pedo-transfer functions (PTF) have been used to estimate unsaturated soil hydraulic properties based on particles size distribution (PSD), and straightforward in-situ infiltration experiments.The specific Pedo-Transfer Functions (PTFs) embedded within the Rosetta model, the physically grounded Arya-Paris model, and the Beerkan Estimation of Soil Transfer parameters (BEST) have been specifically developed to gauge soil hydraulic parameters based on soil texture, bulk density, and, eventually, outcomes from single-ring infiltration experiments. These models were applied to a diverse array of soil types from both Northern and Central Tunisia, with a subsequent comparative analysis aimed at evaluating their potential applicability and individual performances.Consequently, the estimated parameters derived from these models were incorporated into Hydrus to compute water flow in the vadose zone under the actual weather conditions prevailing in Tunisia. The resultant effects on the calculated water balance, encompassing infiltration, drainage, and runoff, were systematically compared for a comprehensive understanding of their implications.Results show that soil hydraulic parameters determined with different techniques are significantly different. The results for simulated water balance over 3 years, show also differences especially for intense rainfall events. It seems that the BEST method is a valuable technique for estimating soil hydraulic parameters, offering a cost-effective and practical alternative to traditional methods, especially as it leverages on experimental infiltration data.
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
Improvement of contaminant retention with the use of biochar in the groundwater infiltration basin of Korba (Tunisia)
The overexploitation of the Korba aquifer (Cap Bon, North Tunisia) has led to the drawing down of its static water level and the degradation of its quality due to the intrusion of saline water from the sea. To address this situation, treated wastewater is used for the artificial recharge of the aquifer through three infiltration basins.Treated wastewater is known to carry various emerging contaminants and pharmaceuticals as they are often not retained in traditional wastewater treatment plants. To tackle this problem the use of biochars is often recommended to conduct a second stage low-cost decontamination strategy. Indeed, biochar can be produced easily at a low cost, with different agricultural residues. In this study, the impact of biochar derived from Rosemary, Bamboo, St. John's Wort, Olive, Cypress, and Palm Trees on the mobility and retention of emerging contaminants was evaluated.The first stage of this work was to evaluate the potential retention capacity of the different biochars produced in a low-cost metallic kiln with local biomass residues. Therefore we used Methylene Blue (MB) as a proxy for organic contaminants to establish adsorption isotherms to quantify their respective specific surface area and adsorption capacities.The adsorption isotherms at 20°C were established to evaluate their respective specific surface areas and were fitted to different adsorption models.The surface functional groups of biochars were characterized by FTIR spectroscopy.The analysis of the results showed that the biochar obtained from Rosemary, Bamboo, and St. John's Wort exhibited remarkable elimination and better adsorption capacity with values of 1.6g/L for Rosemary, 0.4g/L for St. John's Wort, and 0.2g/L for Bamboo. An average adsorption capacity was observed with 0.09g/L for Cypress, 0.055g/L for Olive, and low adsorption with a value of 0.03g/L for traditional Olive and Palm Trees.The second stage was to test the dynamic retention properties of biochar on soil monolith experiments, where the MB elution curves were analyzed with and without the addition of biochar. The presence of biochar in the soil monoliths drastically reduced the retention of MB, demonstrating its efficiency as an adsorbent filter. These results underscore the strong potential of biochar in water treatment to enhance quality by reducing pollution.
- 20 January 2025
- Published by Copernicus GmbH
Open AccessImprovement of contaminant retention with the use of biochar in the groundwater infiltration basin of Korba (Tunisia)
The overexploitation of the Korba aquifer (Cap Bon, North Tunisia) has led to the drawing down of its static water level and the degradation of its quality due to the intrusion of saline water from the sea. To address this situation, treated wastewater is used for the artificial recharge of the aquifer through three infiltration basins.Treated wastewater is known to carry various emerging contaminants and pharmaceuticals as they are often not retained in traditional wastewater treatment plants. To tackle this problem the use of biochars is often recommended to conduct a second stage low-cost decontamination strategy. Indeed, biochar can be produced easily at a low cost, with different agricultural residues. In this study, the impact of biochar derived from Rosemary, Bamboo, St. John's Wort, Olive, Cypress, and Palm Trees on the mobility and retention of emerging contaminants was evaluated.The first stage of this work was to evaluate the potential retention capacity of the different biochars produced in a low-cost metallic kiln with local biomass residues. Therefore we used Methylene Blue (MB) as a proxy for organic contaminants to establish adsorption isotherms to quantify their respective specific surface area and adsorption capacities.The adsorption isotherms at 20°C were established to evaluate their respective specific surface areas and were fitted to different adsorption models.The surface functional groups of biochars were characterized by FTIR spectroscopy.The analysis of the results showed that the biochar obtained from Rosemary, Bamboo, and St. John's Wort exhibited remarkable elimination and better adsorption capacity with values of 1.6g/L for Rosemary, 0.4g/L for St. John's Wort, and 0.2g/L for Bamboo. An average adsorption capacity was observed with 0.09g/L for Cypress, 0.055g/L for Olive, and low adsorption with a value of 0.03g/L for traditional Olive and Palm Trees.The second stage was to test the dynamic retention properties of biochar on soil monolith experiments, where the MB elution curves were analyzed with and without the addition of biochar. The presence of biochar in the soil monoliths drastically reduced the retention of MB, demonstrating its efficiency as an adsorbent filter. These results underscore the strong potential of biochar in water treatment to enhance quality by reducing pollution.
- Open Access
Evaluation of Soil Hydraulic Properties in Northern and Central Tunisian Soils for Improvement of Hydrological Modelling
The hydrological cycle is strongly affected by climate changes causing extreme weather events with long drought periods and heavy rainfall events. To predict the hydrological functioning of Tunisian catchments, modelling is an essential tool to estimate the consequences on water resources and to test the sustainability of the different land uses. Soil physical properties describing water flow are essential to feed the models and must therefore be determined all over the watershed. A simple but robust ring infiltration method combined with particle size distribution (PSD) analysis (BEST method) was used to evaluate and derive the retention properties and the hydraulic conductivities. Physically based and statistical pedotransfer functions based on PSD were compared to test their potential use for different types of Tunisian soils. The functional sensitivity of these parameters was assessed by employing the Hydrus-1D software (PC Progress, Prague, Czech Republic) for water balance computations. This evaluation process involved testing the responsiveness and accuracy of the parameters in simulating various water balance components within the model. The evaluation of soil hydraulic parameters across the three used models highlighted significant variations, demonstrating distinct characteristics in each model. While notable differences were evident overall, intriguing similarities emerged, particularly regarding saturated hydraulic conductivity between BEST and Rosetta, and the shape parameter (n) between Arya–Paris and Rosetta. These parallels indicate shared hydraulic properties among the models, underscoring areas of agreement amid their diverse results. Significant differences were shown for scale parameter for the various methods employed. Marginal differences in evaporation and drainage were observed between the BEST and Arya–Paris methods, with Rosetta distinctly highlighting a disparity between physically based models and statistical models.Open AccessEvaluation of Soil Hydraulic Properties in Northern and Central Tunisian Soils for Improvement of Hydrological Modelling
The hydrological cycle is strongly affected by climate changes causing extreme weather events with long drought periods and heavy rainfall events. To predict the hydrological functioning of Tunisian catchments, modelling is an essential tool to estimate the consequences on water resources and to test the sustainability of the different land uses. Soil physical properties describing water flow are essential to feed the models and must therefore be determined all over the watershed. A simple but robust ring infiltration method combined with particle size distribution (PSD) analysis (BEST method) was used to evaluate and derive the retention properties and the hydraulic conductivities. Physically based and statistical pedotransfer functions based on PSD were compared to test their potential use for different types of Tunisian soils. The functional sensitivity of these parameters was assessed by employing the Hydrus-1D software (PC Progress, Prague, Czech Republic) for water balance computations. This evaluation process involved testing the responsiveness and accuracy of the parameters in simulating various water balance components within the model. The evaluation of soil hydraulic parameters across the three used models highlighted significant variations, demonstrating distinct characteristics in each model. While notable differences were evident overall, intriguing similarities emerged, particularly regarding saturated hydraulic conductivity between BEST and Rosetta, and the shape parameter (n) between Arya–Paris and Rosetta. These parallels indicate shared hydraulic properties among the models, underscoring areas of agreement amid their diverse results. Significant differences were shown for scale parameter for the various methods employed. Marginal differences in evaporation and drainage were observed between the BEST and Arya–Paris methods, with Rosetta distinctly highlighting a disparity between physically based models and statistical models.