DSDaria I. Semenkova

Daria I. Semenkova

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Daria I. Semenkova has a total of 26 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    One-Pot Synthesis of Chitosan/Layered Double Hydroxide Composite and Its Sorption Properties Toward Hexavalent Chromium

    by Roman A. Golubev, Andreii S. Kritchenkov, Anton R. Egorov, Daria I. Semenkova, Linh V. Nguyen, Anatoly A. Kirichuk, Nikolai N. Lobanov, Alexander G. Tskhovrebov, Gunay Z. Mammadova, Aleh V. Kurliuk, et al.

    A one-pot strategy was developed for preparing a chitosan/Mg–Fe layered double hydroxide (LDH) composite by alkaline coprecipitation from an acidic chitosan solution containing Mg(II) and Fe(III) precursors, avoiding separate LDH synthesis and subsequent incorporation into chitosan. X-ray diffraction confirmed LDH formation within the chitosan matrix, and ICP analysis indicated an LDH-equivalent content of approximately 4.1 wt.% on an anhydrous basis. The composite exhibited enhanced chromate adsorption compared with both starting components. The experimental plateau adsorption capacity reached 137.4 mg/g, exceeding those of chitosan (92.2 mg/g) and Mg–Fe LDH (53.5 mg/g). Nonlinear isotherm fitting showed that Mg–Fe LDH was better described by the Freundlich model, whereas chitosan and the composite were better described by the Langmuir model. The kinetic behavior followed the pseudo-second-order equation, while Weber–Morris analysis indicated multistep uptake involving surface interaction and diffusion-related processes. In simulated groundwater containing chloride, bicarbonate, and sulfate, the composite removed 82% of Cr(VI) at 1.0 g/L. It also retained complete chromate uptake over five sorption/desorption cycles, although desorption efficiency decreased from 97.3% to 90.3%. A limitation of this study is that performance was evaluated mainly in batch systems and simplified simulated groundwater; validation with real contaminated waters and dynamic flow conditions is still required.

  • Open Access

    Ultrasonic Synthesis of Magnesium–Iron Layered Double Hydroxides and Their Sorption Properties Toward Chromate Anions

    by Roman A. Golubev, Omar M. Khubiev, Daria I. Semenkova, Linh V. Nguyen, Anton R. Egorov, Nikolai N. Lobanov, Rovshan H. Nazarov, Victor N. Khrustalev, Anatoly A. Kirichuk, Vasili V. Rubanik, et al.

    Layered double hydroxides (LDHs) are promising anion sorbents, but conventional Mg–Fe LDH synthesis requires prolonged aging. The effects of ultrasound application stage on Mg–Fe LDH microstructure and chromate uptake remain insufficiently clarified. This study compared ultrasonic treatment during and after coprecipitation and related XRD-derived microstructural descriptors to Cr(VI) sorption. Mg–Fe LDHs were synthesized using 28 or 40 kHz ultrasound during or after coprecipitation and 1.7 MHz ultrasound after coprecipitation; 24 h thermal aging was used as a reference. The products were characterized by ICP-MS, FTIR, TGA/DSC, SEM, and XRD and tested for chromate adsorption, kinetics, recyclability, multicomponent-solution performance, and soil Cr(VI) immobilization. Fifteen minutes of ultrasonication yielded Mg/Fe ≈ 2 LDHs and shortened synthesis compared with 24 h aging. Ultrasound during coprecipitation at 28 kHz gave the best sorbent, increasing experimental adsorption capacity to 80.35 mg/g versus 53.70 mg/g for the reference LDH. Sorption followed pseudo-second-order kinetics and was best described by the Freundlich model. In a multicomponent solution, this sample removed 68% Cr(VI) at 1.0 g/L and reduced water-soluble Cr(VI) in soil from 14.31 to 0.26 mg. Ultrasound application during coprecipitation improves Mg–Fe LDH structure-related characteristics and chromate sorption.

  • Open Access

    Multifunctional Chitosan/Mn(II) Complexes: Preparation, Catalytic Activity in Imine Synthesis and Aldol Reaction, and Effect on Milk Fermentation/Post-Acidification

    by Roman A. Golubev, Andrey A. Nikolaev, Daria I. Semenkova, Anton R. Egorov, Linh V. Nguyen, Rovshan H. Nazarov, Anatoly A. Kirichuk, Vasili V. Rubanik, Tatsiana V. Shakola, Irina S. Garkushina, et al.

    Herein, we prepared nanoparticles of chitosan–manganese(II) complexes in different molar ratios (1:2, 1:1, and 2:1) and fully characterized them using dynamic and electrophoretic light scattering, X-ray diffraction, SEM, FTIR, and thermal analysis. Nanoparticles Chitosan + Mn2+ (1:1) have a high catalytic activity in the oxidative coupling of benzylamine, resulting in the imine formation and also in selective aldol reaction. Chitosan + Mn2+ (1:1) catalyze the reactions in the greenest solvents: water and water/ethanol mixture. Moreover, Chitosan + Mn2+ (1:1) is very easy to prepare and convenient to use. The catalyst is separated from the reaction mixture by a simple nanoporous filter or centrifugation and does not lose catalytic activity after at least ten uses. The chitosan–manganese(II) complexes reduce the milk fermentation time, demonstrating the effectiveness in accelerating the fermentation process by Streptococcus thermophilus. They also contribute to increasing the shelf life of fermented milk products by inhibiting the undesirable post-acidification process. We found that the optimal ratio of chitosan and Mn2+ to manifest the apogee of the desired effects (acceleration of milk fermentation and increase in the shelf life of the fermented product) is 1:2.


  • Open Access

    Сhitosan/Manganese(II) Complexes: Synthesis and Effect on Fermentation and Post Acidification of Fermented Milk by Streptococcus thermophilus

    by Andrey A. Nikolaev, Linh V. Nguyen, Daria I. Semenkova, Gunay Z. Mammadova, Aleh V. Kurliuk, Nikolai N. Lobanov, Alexander G. Tskhovrebov, Ilya S. Kritchenkov, Anatoly A. Kirichuk, Richard M. Moutloali, et al.

    Post-acidification is a common challenge for fermented dairy products, which can significantly reduce the shelf life. Herein, we developed metal nanoparticles based on chitosan and Mn(II) ions that can slow down post-acidification and stimulate the milk fermentation process. By systematic characterization and optimization using dynamic and electrophoretic light scattering, X-ray diffraction, SEM, FTIR, and thermal analysis, we obtained nanoparticles with progressively decreasing zeta potential and sedimentation instability in aqueous medium. In addition, the obtained systems reduced the milk fermentation time, thereby demonstrating the effectiveness in accelerating the fermentation process by the gram-positive Streptococcus thermophilus bacterium. They also contributed to ~2 times longer shelf life of fermented milk products by inhibiting the undesirable post-acidification process. The study offers a promising approach to improving the quality and stability of fermented milk products.

  • Open Access

    New Antibacterial and Antioxidant Chitin Derivatives: Ultrasonic Preparation and Biological Effects

    by Anton R. Egorov, Omar M. Khubiev, Roman A. Golubev, Daria I. Semenkova, Andrey A. Nikolaev, Abel M. Maharramov, Gunay Z. Mammadova, Wanjun Liu, Alexander G. Tskhovrebov, Andreii S. Kritchenkov

    This work focuses on the first use of ultrasonic phenol-ene coupling as a polymer analogous transformation. The ultrasonic reaction was introduced into chitin chemistry, resulting in the fast and convenient preparation of new water-soluble cationic chitin derivatives. Since water-soluble derivatives of fully deacetylated chitin are poorly described in the literature, the synthesis of each new type of these derivatives is a significant event in polysaccharide chemistry. Polycations, or cationic polymers, are of particular interest as antibacterial agents. Consequently, the resulting polymers were tested for their antibacterial activity and toxicity. We found that the highly substituted polymer of medium molecular weight exhibited the most pronounced in vitro antibacterial effect. We prepared nanoparticles using the ionic gelation technique. The most effective in vitro antibacterial chitin-based systems were tested in vivo in rats. These tests demonstrated outstanding antibacterial effects combined with an absence of toxicity. Additionally, we found that the resulting polymers, unlike their nanoparticle counterparts, also exhibited strong antioxidant effects. In summary, we demonstrated the effectiveness of ultrasound in polymer chemistry and highlighted the importance of the sonochemical approach in the chemical modification of polysaccharides. This approach enables the synthesis of derivatives with improved physicochemical and biological properties.


  • Open Access

    Rhodamine B-Containing Chitosan-Based Films: Preparation, Luminescent, Antibacterial, and Antioxidant Properties

    by Omar M. Khubiev, Anton R. Egorov, Daria I. Semenkova, Darina S. Salokho, Roman A. Golubev, Nkumbu D. Sikaona, Nikolai N. Lobanov, Ilya S. Kritchenkov, Alexander G. Tskhovrebov, Anatoly A. Kirichuk, et al.

    In this study, Rhodamine B-containing chitosan-based films were prepared and characterized using their mechanical, photophysical, and antibacterial properties. The films were synthesized using the casting method and their mechanical properties, such as tensile strength and elongation at break, were found to be dependent on the chemical composition and drying process. Infrared spectroscopy and X-ray diffraction analysis were used to examine the chemical structure and degree of structural perfection of the films. The photophysical properties of the films, including absorption spectra, fluorescence detection, emission quantum yields, and lifetimes of excited states, were studied in detail. Rhodamine B-containing films exhibited higher temperature sensitivity and showed potential as fluorescent temperature sensors in the physiological range. The antibacterial activity of the films was tested against Gram-positive bacteria S. aureus and Gram-negative bacteria E. coli, with Rhodamine B-containing films demonstrating more pronounced antibacterial activity compared to blank films. The findings suggest that the elaborated chitosan-based films, particularly those containing Rhodamine B can be of interest for further research regarding their application in various fields such as clinical practice, the food industry, and agriculture due to their mechanical, photophysical, and antibacterial properties.