Rofiul Islam Rofi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Rofiul Islam Rofi has a total of 2 co-authors. Here are the top co-authors by number of shared publications:
- Rafiur Rahman
Mymensingh Engineering College, Bangladesh
4 shared publications Rafiur Rahman
Mymensingh Engineering College, Department of Civil Engineering, Mymensingh, Bangladesh
2 shared publications
Latest Publications
- Open Access
- 1 January 2026
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Tekstilna industrija
- Vol. 74 (1) , 17-23
A comprehensive review of biodegradable and sustainable polymers for textile applications
The textile sector is one of the biggest users of petroleum-derived synthetic polymers, such as acrylic, polyester, and nylon, which are resistant to deterioration. Biodegradable and sustainable substitutes made from renewable feedstocks or designed to be recyclable have received more attention lately. With an emphasis on natural biopolymers like cellulose, chitosan, and proteins; bio-based synthetic polymers like PLA, PHA, and PEF; blends; and nanocomposites, this review provides a thorough summary of recent developments in totally biodegradable and sustainable textile polymers. Future directions that involve improved recycling technologies, 3D printing using bio-based fibers, and smart biodegradable polymers have also been highlighted. To sum up, biodegradable polymers have the potential to significantly change the future of textiles in terms of sustainability and circularity. This analysis highlights recent advances and unresolved issues in the context of circularity while integrating natural, bio-based, and recycled polymer techniques in textiles in an exceptional manner.
- 1 January 2026
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Tekstilna industrija
- Vol. 74 (1) , 17-23
Open AccessA comprehensive review of biodegradable and sustainable polymers for textile applications
The textile sector is one of the biggest users of petroleum-derived synthetic polymers, such as acrylic, polyester, and nylon, which are resistant to deterioration. Biodegradable and sustainable substitutes made from renewable feedstocks or designed to be recyclable have received more attention lately. With an emphasis on natural biopolymers like cellulose, chitosan, and proteins; bio-based synthetic polymers like PLA, PHA, and PEF; blends; and nanocomposites, this review provides a thorough summary of recent developments in totally biodegradable and sustainable textile polymers. Future directions that involve improved recycling technologies, 3D printing using bio-based fibers, and smart biodegradable polymers have also been highlighted. To sum up, biodegradable polymers have the potential to significantly change the future of textiles in terms of sustainability and circularity. This analysis highlights recent advances and unresolved issues in the context of circularity while integrating natural, bio-based, and recycled polymer techniques in textiles in an exceptional manner.
- Open Access
- 3 October 2025
- Published by MDPI AG in Preprints.org
Increasing the Efficiency of Dyeing in Textile Industry: Innovations and Best Practices
The textile dyeing industry is a crucial sector in global manufacturing, but it is also one of the most resource-intensive, consuming significant amounts of water, energy, and chemicals. This research paper presents an experimental evaluation of various dyeing techniques aimed at improving efficiency while minimizing environmental impact. Laboratory tests were conducted on low-liquor ratio dyeing, ultrasonic and plasma-assisted dyeing, enzymatic treatments, and digital printing. The study compares these techniques based on dye uptake, water and energy consumption, and environmental impact. The findings suggest that advanced dyeing technologies significantly reduce resource usage while maintaining fabric quality. The paper concludes by recommending sustainable practices and future directions for enhancing dyeing efficiency.
- 3 October 2025
- Published by MDPI AG in Preprints.org
Open AccessIncreasing the Efficiency of Dyeing in Textile Industry: Innovations and Best Practices
The textile dyeing industry is a crucial sector in global manufacturing, but it is also one of the most resource-intensive, consuming significant amounts of water, energy, and chemicals. This research paper presents an experimental evaluation of various dyeing techniques aimed at improving efficiency while minimizing environmental impact. Laboratory tests were conducted on low-liquor ratio dyeing, ultrasonic and plasma-assisted dyeing, enzymatic treatments, and digital printing. The study compares these techniques based on dye uptake, water and energy consumption, and environmental impact. The findings suggest that advanced dyeing technologies significantly reduce resource usage while maintaining fabric quality. The paper concludes by recommending sustainable practices and future directions for enhancing dyeing efficiency.
- Open Access
- 19 August 2025
- Published by AccScience Publishing in Explora: Environment and Resource
- p. 025210041
Different methods and technologies of air pollution mitigation: An overview
Air pollution represents a critical dimension of environmental contamination and poses severe risks to human health and ecological systems. While environmental pollution can manifest in various forms—such as air, water, and soil pollution—air pollution remains the most pervasive and damaging. Rapid industrialization and the proliferation of pollution-intensive technologies have significantly contributed to the degradation of air quality. This review provides an overview of existing research focused on strategies for controlling and mitigating air pollution. Emphasis is placed on technological interventions, regulatory measures, and innovative approaches being explored to reduce airborne pollutants. The study also addresses current research gaps and proposes future approaches for air pollution mitigation measures.
- 19 August 2025
- Published by AccScience Publishing in Explora: Environment and Resource
- p. 025210041
Open AccessDifferent methods and technologies of air pollution mitigation: An overview
Air pollution represents a critical dimension of environmental contamination and poses severe risks to human health and ecological systems. While environmental pollution can manifest in various forms—such as air, water, and soil pollution—air pollution remains the most pervasive and damaging. Rapid industrialization and the proliferation of pollution-intensive technologies have significantly contributed to the degradation of air quality. This review provides an overview of existing research focused on strategies for controlling and mitigating air pollution. Emphasis is placed on technological interventions, regulatory measures, and innovative approaches being explored to reduce airborne pollutants. The study also addresses current research gaps and proposes future approaches for air pollution mitigation measures.
- Open Access
- 6 June 2025
- Published by AccScience Publishing in Explora: Environment and Resource
- Vol. 2 (2) , 025160032
A critical review on environmental pollution caused by the textile industry
Environmental pollution is one of the most critical challenges facing modern society, and the textile industry is a significant contributor to this problem. As global demand for textiles rises, so does the environmental toll of textile production. This study explores the various ways in which the textile industry contributes to pollution and endangers both ecosystems and human health. A major source of pollution is the industry’s high energy consumption, often fueled by coal, oil, and natural gas. The burning of these fossil fuels releases greenhouse gases and other harmful emissions, contributing to air pollution, climate change, acid rain, and ozone depletion. Another major issue is the use of toxic chemicals and dyes in textile processing. Improperly treated wastewater from dyeing and finishing processes is frequently discharged into rivers, contaminating water sources, harming aquatic life, and threatening human health. Synthetic fibers like polyester, nylon, and acrylic also pose serious environmental risks. These non-biodegradable materials release microplastics during washing, which enter water systems, harm marine animals, and may even enter the human food chain. In addition, the industry generates significant solid waste, much of which ends up in landfills and releases toxic substances as it degrades. Human health is also directly impacted, particularly for those living near or working in textile facilities, who may suffer from respiratory diseases, skin disorders, and even life-threatening illnesses due to prolonged exposure to pollutants. In conclusion, addressing textile pollution requires stricter environmental regulations, sustainable production practices, better waste management, and increased awareness. Without urgent action, the negative impacts will continue to escalate.
- 6 June 2025
- Published by AccScience Publishing in Explora: Environment and Resource
- Vol. 2 (2) , 025160032
Open AccessA critical review on environmental pollution caused by the textile industry
Environmental pollution is one of the most critical challenges facing modern society, and the textile industry is a significant contributor to this problem. As global demand for textiles rises, so does the environmental toll of textile production. This study explores the various ways in which the textile industry contributes to pollution and endangers both ecosystems and human health. A major source of pollution is the industry’s high energy consumption, often fueled by coal, oil, and natural gas. The burning of these fossil fuels releases greenhouse gases and other harmful emissions, contributing to air pollution, climate change, acid rain, and ozone depletion. Another major issue is the use of toxic chemicals and dyes in textile processing. Improperly treated wastewater from dyeing and finishing processes is frequently discharged into rivers, contaminating water sources, harming aquatic life, and threatening human health. Synthetic fibers like polyester, nylon, and acrylic also pose serious environmental risks. These non-biodegradable materials release microplastics during washing, which enter water systems, harm marine animals, and may even enter the human food chain. In addition, the industry generates significant solid waste, much of which ends up in landfills and releases toxic substances as it degrades. Human health is also directly impacted, particularly for those living near or working in textile facilities, who may suffer from respiratory diseases, skin disorders, and even life-threatening illnesses due to prolonged exposure to pollutants. In conclusion, addressing textile pollution requires stricter environmental regulations, sustainable production practices, better waste management, and increased awareness. Without urgent action, the negative impacts will continue to escalate.
- Open Access
- 11 April 2025
- Published by MDPI AG in Preprints.org
Experimental Study on the Use of Recycled Denim Fibers as Reinforcement in Concrete Composites
This research presents a comprehensive experimental investigation into the incorporation of recycled denim fibers into concrete as a sustainable reinforcement alternative. With the fashion industry generating substantial volumes of denim waste annually, particularly from post-consumer garments, the need for eco-conscious reuse strategies has become critical. Recycled denim fibers, rich in cellulose and blended synthetics, offer tensile properties that may enhance concrete’s mechanical behavior. Concrete mixes were prepared with incremental fiber dosages (0%, 0.5%, 1.0%, and 1.5% by weight of cement) and tested for workability, compressive strength, flexural strength, and durability through a battery of standardized tests. The findings indicate that denim fiber reinforcement improves the flexural strength and crack resistance of concrete, especially at 1.0% fiber content, with acceptable compromises in workability. This approach supports circular economy goals and presents a novel route for textile waste valorization in construction.
- 11 April 2025
- Published by MDPI AG in Preprints.org
Open AccessExperimental Study on the Use of Recycled Denim Fibers as Reinforcement in Concrete Composites
This research presents a comprehensive experimental investigation into the incorporation of recycled denim fibers into concrete as a sustainable reinforcement alternative. With the fashion industry generating substantial volumes of denim waste annually, particularly from post-consumer garments, the need for eco-conscious reuse strategies has become critical. Recycled denim fibers, rich in cellulose and blended synthetics, offer tensile properties that may enhance concrete’s mechanical behavior. Concrete mixes were prepared with incremental fiber dosages (0%, 0.5%, 1.0%, and 1.5% by weight of cement) and tested for workability, compressive strength, flexural strength, and durability through a battery of standardized tests. The findings indicate that denim fiber reinforcement improves the flexural strength and crack resistance of concrete, especially at 1.0% fiber content, with acceptable compromises in workability. This approach supports circular economy goals and presents a novel route for textile waste valorization in construction.
- Open Access
- 18 February 2025
- Published by MDPI AG in Preprints.org
Redefining Fabric Performance: Advanced Strategies for Enhanced Durability and Functionality
Extensive research into sophisticated surface modification techniques has been prompted by the growing demand for high-performance fabrics with improved mechanical, thermal, and interfacial qualities. This study examines how novel techniques, such as chemical vapor deposition (CVD) and cold plasma treatment, affect the structural and functional properties of textile materials, especially blends of cotton and nylon. The study looks at how different treatments affect the fabric's tensile strength, adhesion, durability, elongation, and resistance to environmental influences. Significant gains in surface energy, fiber-matrix bonding, and overall performance are shown by comparing untreated and treated samples. The improved mechanical integrity and functional adaptability of the changed fabrics are confirmed by experimental results from surface roughness measures, scanning electron microscopy (SEM), and tensile testing. The study's conclusions provide fresh perspectives on how to best utilize textile materials for high-performance uses in sectors like technical textiles, sportswear, and protective apparel.
- 18 February 2025
- Published by MDPI AG in Preprints.org
Open AccessRedefining Fabric Performance: Advanced Strategies for Enhanced Durability and Functionality
Extensive research into sophisticated surface modification techniques has been prompted by the growing demand for high-performance fabrics with improved mechanical, thermal, and interfacial qualities. This study examines how novel techniques, such as chemical vapor deposition (CVD) and cold plasma treatment, affect the structural and functional properties of textile materials, especially blends of cotton and nylon. The study looks at how different treatments affect the fabric's tensile strength, adhesion, durability, elongation, and resistance to environmental influences. Significant gains in surface energy, fiber-matrix bonding, and overall performance are shown by comparing untreated and treated samples. The improved mechanical integrity and functional adaptability of the changed fabrics are confirmed by experimental results from surface roughness measures, scanning electron microscopy (SEM), and tensile testing. The study's conclusions provide fresh perspectives on how to best utilize textile materials for high-performance uses in sectors like technical textiles, sportswear, and protective apparel.
- Open Access
- 11 February 2025
- Published by MDPI AG in Preprints.org
Performance Evaluation of Cotton-Nylon Blends Across Different Yarn Structures
Combining several fibers enhances the strength, elongation, and homogeneity of yarn. This study investigates how yarn performance is affected by the blending of cotton (CO) with nylon (PA). In yarn constructions that were stiff, core-spun, and dual-core-spun, different blend ratios were evaluated. According to the findings, adding more nylon increases the yarn's strength, elongation, and durability while decreasing its unevenness and flaws. Greater elongation and flexibility were demonstrated by core and dual-core-spun yarns, which made them perfect for high-performance uses including industrial textiles and sportswear.
- 11 February 2025
- Published by MDPI AG in Preprints.org
Open AccessPerformance Evaluation of Cotton-Nylon Blends Across Different Yarn Structures
Combining several fibers enhances the strength, elongation, and homogeneity of yarn. This study investigates how yarn performance is affected by the blending of cotton (CO) with nylon (PA). In yarn constructions that were stiff, core-spun, and dual-core-spun, different blend ratios were evaluated. According to the findings, adding more nylon increases the yarn's strength, elongation, and durability while decreasing its unevenness and flaws. Greater elongation and flexibility were demonstrated by core and dual-core-spun yarns, which made them perfect for high-performance uses including industrial textiles and sportswear.
- Open Access
- 11 February 2025
- Published by MDPI AG in Preprints.org
Optimizing Sisal-Cotton Fiber Blends: Enhancing Strength, Durability, and Sustainability
Blending natural fibers enhances textile properties by combining their strengths. This study explores various ratios of sisal and cotton fibers to determine the optimal blend for strength, durability, and flexibility. Cotton provides softness and comfort, while sisal contributes high tensile strength and wear resistance. The blending process included opening, carding, drawing, combing, roving, and spinning. Tests conducted on tensile strength, moisture absorption, durability, and surface morphology revealed that a 40:60 sisal-cotton blend improved strength by 20% while maintaining flexibility. Higher sisal content increased tensile strength but reduced softness and moisture absorption. These findings suggest that optimized fiber blending can enhance both the sustainability and performance of textiles.
- 11 February 2025
- Published by MDPI AG in Preprints.org
Open AccessOptimizing Sisal-Cotton Fiber Blends: Enhancing Strength, Durability, and Sustainability
Blending natural fibers enhances textile properties by combining their strengths. This study explores various ratios of sisal and cotton fibers to determine the optimal blend for strength, durability, and flexibility. Cotton provides softness and comfort, while sisal contributes high tensile strength and wear resistance. The blending process included opening, carding, drawing, combing, roving, and spinning. Tests conducted on tensile strength, moisture absorption, durability, and surface morphology revealed that a 40:60 sisal-cotton blend improved strength by 20% while maintaining flexibility. Higher sisal content increased tensile strength but reduced softness and moisture absorption. These findings suggest that optimized fiber blending can enhance both the sustainability and performance of textiles.
- Open Access
- 6 February 2025
- Published by MDPI AG in Preprints.org
Enhancing Yarn Strength Through Fiber Blending: A Study on Cotton/Polyester Blended Yarns
Strength, elongation, and uniformity are just a few of the mechanical qualities of yarns that can be greatly enhanced by blending several fibers. With an emphasis on cotton/polyester blends, this study investigates how fiber blending affects yarn performance. The study assesses the variations in yarn strength and other physical characteristics by altering the blending ratio and yarn structure (stiff, core-spun, and dual-core-spun). The findings show that while decreasing unevenness and flaws, raising the polyester blend ratio improves yarn strength and elongation. Because of their increased elasticity, core-spun and dual-core-spun yarns are appropriate for uses that call for both strength and flexibility.
- 6 February 2025
- Published by MDPI AG in Preprints.org
Open AccessEnhancing Yarn Strength Through Fiber Blending: A Study on Cotton/Polyester Blended Yarns
Strength, elongation, and uniformity are just a few of the mechanical qualities of yarns that can be greatly enhanced by blending several fibers. With an emphasis on cotton/polyester blends, this study investigates how fiber blending affects yarn performance. The study assesses the variations in yarn strength and other physical characteristics by altering the blending ratio and yarn structure (stiff, core-spun, and dual-core-spun). The findings show that while decreasing unevenness and flaws, raising the polyester blend ratio improves yarn strength and elongation. Because of their increased elasticity, core-spun and dual-core-spun yarns are appropriate for uses that call for both strength and flexibility.
- Open Access
- 6 February 2025
- Published by MDPI AG in Preprints.org
Study on the Physical Properties of the Melange Yarn
Mélange yarn, produced by blending fibers of different colors before spinning, is widely used in the textile industry for its unique aesthetic and functional advantages. This study investigates the physical properties of mélange yarn, focusing on tensile strength, elongation, evenness, hairiness, and abrasion resistance. The influence of different spinning techniques, including ring and compact spinning, on these properties is thoroughly examined. Additionally, the impact of fiber composition, particularly cotton-polyester and wool-acrylic blends, on yarn performance is analyzed. Through standardized testing methods, including universal tensile testing, Uster evenness measurement, and Martindale abrasion testing, the mechanical and surface characteristics of mélange yarn are assessed. The findings indicate that compact-spun mélange yarn exhibits superior strength, lower hairiness, and better evenness compared to ring-spun mélange yarn. Moreover, the study highlights the role of synthetic fibers in enhancing abrasion resistance, making mélange yarn more durable for high-performance applications. These insights provide valuable guidance for optimizing mélange yarn production, ensuring better quality and performance in various textile applications. Future research should explore sustainable fiber alternatives and advanced spinning modifications to further enhance mélange yarn properties.
- 6 February 2025
- Published by MDPI AG in Preprints.org
Open AccessStudy on the Physical Properties of the Melange Yarn
Mélange yarn, produced by blending fibers of different colors before spinning, is widely used in the textile industry for its unique aesthetic and functional advantages. This study investigates the physical properties of mélange yarn, focusing on tensile strength, elongation, evenness, hairiness, and abrasion resistance. The influence of different spinning techniques, including ring and compact spinning, on these properties is thoroughly examined. Additionally, the impact of fiber composition, particularly cotton-polyester and wool-acrylic blends, on yarn performance is analyzed. Through standardized testing methods, including universal tensile testing, Uster evenness measurement, and Martindale abrasion testing, the mechanical and surface characteristics of mélange yarn are assessed. The findings indicate that compact-spun mélange yarn exhibits superior strength, lower hairiness, and better evenness compared to ring-spun mélange yarn. Moreover, the study highlights the role of synthetic fibers in enhancing abrasion resistance, making mélange yarn more durable for high-performance applications. These insights provide valuable guidance for optimizing mélange yarn production, ensuring better quality and performance in various textile applications. Future research should explore sustainable fiber alternatives and advanced spinning modifications to further enhance mélange yarn properties.