Samuel Pelacani
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Samuel Pelacani has a total of 50 co-authors. Here are the top co-authors by number of shared publications:
- Francesco Barbadori
Department of Earth Sciences, University of Florence, 50121 Florence, Italy
5 shared publications - Maria Teresa Ceccherini
Department of Agriculture, Food, Environment and Forestry, University of Florence, Piazzale delle Cascine, 28, 50144 Florence, Italy
5 shared publications - Simone Tommasini
Department of Earth Science, University of Florence, Via G. La Pira 4, 50121 Florence, Italy
5 shared publications Sandro Moretti
4 shared publications- Sandro Moretti
Department of Earth Sciences, University of Firenze, Via La Pira 4, 50121 Firenze, Italy
4 shared publications Federico Raspini
Department of Earth Sciences University of Florence Florence Italy
3 shared publications
Latest Publications
- Open Access
- 5 May 2026
- Published by Wiley in Earth Surface Processes and Landforms
- Vol. 51 (5)
Geomorphological mapping of the Becca d'Aver deep‐seated gravitational slope deformation (Aosta Valley, Italy) based on multi‐scale and multi‐sensor analysis
The aim of this work is a multi‐scale, multi‐sensor geomorphological characterization of the Becca d'Aver deep‐seated gravitational slope deformation (DsGSD). Particular attention was given to the pseudo‐badlands morphologies that crop out in the area, which are producing sediments that are subsequently reactivated by debris flows. A geomorphological map at a scale of 1:10000 was generated in the Cretaz–Comba Basset basin area, left side of the Aosta Valley in northern Italy, ending at the Champagne fan. The study area is characterized by gravitational and runoff associated processes that interact with anthropic structures. However, pseudo‐badlands landforms represent the main source of sediments providing loose materials highly connected with the main drainage system. The landforms in the area were characterized and mapped using Google Earth and remote sensing interpretation as well as with field campaigns. Especially radar (Interferometric Synthetic Aperture Radar, InSAR) and optical (multispectral) data were employed to map active deformation areas and detect bare soil using the Bare Soil Index (BSI). Furthermore, we conducted a detailed terrain analysis (TA) and derived the Geological Strength Index (GSI). Moreover, we applied the connectivity index (IC) model and used remotely sensed data to assess the contribution of pseudo‐badlands to the general sediment transport. The results highlight how altered bedrock materials and anthropic deposits of mined serpentinite (waste deposits) contribute to the provision of sediments that are related to hydrogeological hazard in the area.
- 5 May 2026
- Published by Wiley in Earth Surface Processes and Landforms
- Vol. 51 (5)
Open AccessGeomorphological mapping of the Becca d'Aver deep‐seated gravitational slope deformation (Aosta Valley, Italy) based on multi‐scale and multi‐sensor analysis
The aim of this work is a multi‐scale, multi‐sensor geomorphological characterization of the Becca d'Aver deep‐seated gravitational slope deformation (DsGSD). Particular attention was given to the pseudo‐badlands morphologies that crop out in the area, which are producing sediments that are subsequently reactivated by debris flows. A geomorphological map at a scale of 1:10000 was generated in the Cretaz–Comba Basset basin area, left side of the Aosta Valley in northern Italy, ending at the Champagne fan. The study area is characterized by gravitational and runoff associated processes that interact with anthropic structures. However, pseudo‐badlands landforms represent the main source of sediments providing loose materials highly connected with the main drainage system. The landforms in the area were characterized and mapped using Google Earth and remote sensing interpretation as well as with field campaigns. Especially radar (Interferometric Synthetic Aperture Radar, InSAR) and optical (multispectral) data were employed to map active deformation areas and detect bare soil using the Bare Soil Index (BSI). Furthermore, we conducted a detailed terrain analysis (TA) and derived the Geological Strength Index (GSI). Moreover, we applied the connectivity index (IC) model and used remotely sensed data to assess the contribution of pseudo‐badlands to the general sediment transport. The results highlight how altered bedrock materials and anthropic deposits of mined serpentinite (waste deposits) contribute to the provision of sediments that are related to hydrogeological hazard in the area.
- Open Access
- 18 March 2026
- Published by Elsevier in Food Research International
- Vol. 233 (Pt 2) , 118890
Machine learning supported olive oil compound profiling for assessing geographic and cultivar authenticity
- 18 March 2026
- Published by Elsevier in Food Research International
- Vol. 233 (Pt 2) , 118890
Open AccessMachine learning supported olive oil compound profiling for assessing geographic and cultivar authenticity
- Open Access
- 17 June 2025
- Published by Elsevier in Science of The Total Environment
- Vol. 990, 179894
Geochemical fingerprinting of extra virgin olive oils based on radiogenic strontium isotopes
- 17 June 2025
- Published by Elsevier in Science of The Total Environment
- Vol. 990, 179894
Open AccessGeochemical fingerprinting of extra virgin olive oils based on radiogenic strontium isotopes
- Open Access
- 18 March 2025
- Published by Copernicus GmbH
FORMATION - Full cOveRage, Multi-scAle and multi-sensor geomorphological map: a practical tool for TerrItOrial planning and landslide analysis
The FORMATION project aims at fostering the implementation of new approaches for the description of geomorphological processes and representation of landforms, whose spatial distribution represents the most immediate tool to detect areas affected by geological risks, such as landslides.The FORMATION project aims to fill this gap, integrating emerging remote sensing techniques into the new Italian guidelines for the geomorphological mapping provided by ISPRA (Istituto Superiore per la Protezione e la Ricerca Ambientale in Italian, Italian Institute for the environmental protection and research). The main driver of the FORMATION project is the design of new paradigms for geomorphological mapping, where outcomes of traditional geomorphological survey and land degradation models, coupled with multi-band satellite analysis and multi-platform LiDAR and UAV data are convoyed within GIS (Geographic Information System) environment for the classification of landforms and the creation of a multi-scale, digital geomorphological map.Databases, models, tools and methods has been implemented at pilot Italian cases in the Alps and Apennines, which share common pressing challenges on the environment, such as gravitational and running water-based processes causing several damages with a direct implication on human life and millions of euros spent in environmental remediation. Target basins have been selected to cover different geological, geomorphological and climatic settings and to demonstrate the effectiveness and replicability of the proposed methodology.Here we present results for the Val d’Orcia, an area in Central Tuscany (Italy) with a long history of landslides and erosive processes. We exploited outputs provided by interferometric processing of Sentinel-1 data to create ground deformation maps used to scan wide areas, flag unstable zones and support the definition of priorities starting from the situations deemed to be most urgent. A database of active moving areas has been created to support further activities of the project, including field surveys, further investigation with landscape investigations and modeling.Activities performed has been funded by MUR (Ministry of University in Italy) within the PRIN 2022 call Directive Decree n. 104 del 02/02/2022, Codice Progetto MUR 2022C2XPK7, “Full cOveRage, Multi-scAle and multi-sensor geomorphological map: a practical tool for TerrItOrial plaNning - FORMATION”- CUP B53D23007000006, that is included in within the activities funded by European Union (Next Generation EU).
- 18 March 2025
- Published by Copernicus GmbH
Open AccessFORMATION - Full cOveRage, Multi-scAle and multi-sensor geomorphological map: a practical tool for TerrItOrial planning and landslide analysis
The FORMATION project aims at fostering the implementation of new approaches for the description of geomorphological processes and representation of landforms, whose spatial distribution represents the most immediate tool to detect areas affected by geological risks, such as landslides.The FORMATION project aims to fill this gap, integrating emerging remote sensing techniques into the new Italian guidelines for the geomorphological mapping provided by ISPRA (Istituto Superiore per la Protezione e la Ricerca Ambientale in Italian, Italian Institute for the environmental protection and research). The main driver of the FORMATION project is the design of new paradigms for geomorphological mapping, where outcomes of traditional geomorphological survey and land degradation models, coupled with multi-band satellite analysis and multi-platform LiDAR and UAV data are convoyed within GIS (Geographic Information System) environment for the classification of landforms and the creation of a multi-scale, digital geomorphological map.Databases, models, tools and methods has been implemented at pilot Italian cases in the Alps and Apennines, which share common pressing challenges on the environment, such as gravitational and running water-based processes causing several damages with a direct implication on human life and millions of euros spent in environmental remediation. Target basins have been selected to cover different geological, geomorphological and climatic settings and to demonstrate the effectiveness and replicability of the proposed methodology.Here we present results for the Val d’Orcia, an area in Central Tuscany (Italy) with a long history of landslides and erosive processes. We exploited outputs provided by interferometric processing of Sentinel-1 data to create ground deformation maps used to scan wide areas, flag unstable zones and support the definition of priorities starting from the situations deemed to be most urgent. A database of active moving areas has been created to support further activities of the project, including field surveys, further investigation with landscape investigations and modeling.Activities performed has been funded by MUR (Ministry of University in Italy) within the PRIN 2022 call Directive Decree n. 104 del 02/02/2022, Codice Progetto MUR 2022C2XPK7, “Full cOveRage, Multi-scAle and multi-sensor geomorphological map: a practical tool for TerrItOrial plaNning - FORMATION”- CUP B53D23007000006, that is included in within the activities funded by European Union (Next Generation EU).
- Open Access
Geodiversity as a Driver of Soil Microbial Community Diversity and Adaptation in a Mediterranean Landscape
Extreme meteorological events and anthropogenic influences determine important variations in microbial community composition. To know the extent of these variations, it is necessary to delve deeper into the geogenic factors to be considered as a baseline. The purpose of this study was to assess the effect of topographic characteristics and soil geochemistry on the spatial distribution of three Actinobacteria genera considered as molecular biomarkers of landforms belonging to Mediterranean environments. Given the important role that Actinobacteria play in the ecosystem, we performed a spatial distribution model of the genera Rubrobacter, Gaiella, and Microlunatus and investigated the fungi/bacteria ratio in a machine learning (ML)-based framework. Variable importance provided insight into the controlling factor of geomicrobial spatial distribution. The spatial distribution of the predicted Actinobacteria genera generally follows topographic constraints, mostly altitude. Rubrobacter was related to the slope aspect and lithium; Microlunatus was related to the topographic wetness index (TWI) and normalized difference water index (NDWI), as well as the fungi/bacteria ratio; and Gaiella was related to flow path and metals. Our results provide new information on the adaptation of Actinobacteria in Mediterranean areas and show the potential of using ML frameworks for the spatial prediction of OTUs distribution.
Open AccessGeodiversity as a Driver of Soil Microbial Community Diversity and Adaptation in a Mediterranean Landscape
Extreme meteorological events and anthropogenic influences determine important variations in microbial community composition. To know the extent of these variations, it is necessary to delve deeper into the geogenic factors to be considered as a baseline. The purpose of this study was to assess the effect of topographic characteristics and soil geochemistry on the spatial distribution of three Actinobacteria genera considered as molecular biomarkers of landforms belonging to Mediterranean environments. Given the important role that Actinobacteria play in the ecosystem, we performed a spatial distribution model of the genera Rubrobacter, Gaiella, and Microlunatus and investigated the fungi/bacteria ratio in a machine learning (ML)-based framework. Variable importance provided insight into the controlling factor of geomicrobial spatial distribution. The spatial distribution of the predicted Actinobacteria genera generally follows topographic constraints, mostly altitude. Rubrobacter was related to the slope aspect and lithium; Microlunatus was related to the topographic wetness index (TWI) and normalized difference water index (NDWI), as well as the fungi/bacteria ratio; and Gaiella was related to flow path and metals. Our results provide new information on the adaptation of Actinobacteria in Mediterranean areas and show the potential of using ML frameworks for the spatial prediction of OTUs distribution.
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
FORMATION - Full cOveRage, Multi-scAle and multi-sensor geomorphological map: a practical tool for TerrItOrial planning and landslide analysis
The FORMATION project aims at fostering the implementation of new approaches for the description of geomorphological processes and representation of landforms, whose spatial distribution represents the most immediate tool to detect areas affected by geological risks, such as landslides.The FORMATION project aims to fill this gap, integrating emerging remote sensing techniques into the new Italian guidelines for the geomorphological mapping provided by ISPRA (Istituto Superiore per la Protezione e la Ricerca Ambientale in Italian, Italian Institute for the environmental protection and research). The main driver of the FORMATION project is the design of new paradigms for geomorphological mapping, where outcomes of traditional geomorphological survey and land degradation models, coupled with multi-band satellite analysis and multi-platform LiDAR and UAV data are convoyed within GIS (Geographic Information System) environment for the classification of landforms and the creation of a multi-scale, digital geomorphological map.Databases, models, tools and methods will be presented and discussed with prototype implementations at pilot Italian cases in the Alps and Apennines, which share common pressing challenges on the environment, such as gravitational and running water-based processes causing several damages with a direct implication on human life and millions of euros spent in environmental remediation. Target basins have been selected to cover different geological, geomorphological and climatic settings and to demonstrate the effectiveness and replicability of the proposed methodology.Here we present preliminary results for the Val d’Orcia, an area in Central Tuscany (Italy) with a long history of landslides and erosive processes. We exploited outputs provided by interferometric processing of Sentinel-1 data to create ground deformation maps used to scan wide areas, flag unstable zones and support the definition of priorities starting from the situations deemed to be most urgent. A database of active moving areas has been created to support further activities of the project, including field surveys, further investigation with landscape investigations and modeling.Activities performed has been funded by MUR (Ministry of University in Italy) within the PRIN 2022 call Directive Decree n. 104 del 02/02/2022, Codice Progetto MUR 2022C2XPK7, “Full cOveRage, Multi-scAle and multi-sensor geomorphological map: a practical tool for TerrItOrial plaNning - FORMATION”- CUP B53D23007000006, that is included in within the activities funded by European Union (Next Generation EU).
- 20 January 2025
- Published by Copernicus GmbH
Open AccessFORMATION - Full cOveRage, Multi-scAle and multi-sensor geomorphological map: a practical tool for TerrItOrial planning and landslide analysis
The FORMATION project aims at fostering the implementation of new approaches for the description of geomorphological processes and representation of landforms, whose spatial distribution represents the most immediate tool to detect areas affected by geological risks, such as landslides.The FORMATION project aims to fill this gap, integrating emerging remote sensing techniques into the new Italian guidelines for the geomorphological mapping provided by ISPRA (Istituto Superiore per la Protezione e la Ricerca Ambientale in Italian, Italian Institute for the environmental protection and research). The main driver of the FORMATION project is the design of new paradigms for geomorphological mapping, where outcomes of traditional geomorphological survey and land degradation models, coupled with multi-band satellite analysis and multi-platform LiDAR and UAV data are convoyed within GIS (Geographic Information System) environment for the classification of landforms and the creation of a multi-scale, digital geomorphological map.Databases, models, tools and methods will be presented and discussed with prototype implementations at pilot Italian cases in the Alps and Apennines, which share common pressing challenges on the environment, such as gravitational and running water-based processes causing several damages with a direct implication on human life and millions of euros spent in environmental remediation. Target basins have been selected to cover different geological, geomorphological and climatic settings and to demonstrate the effectiveness and replicability of the proposed methodology.Here we present preliminary results for the Val d’Orcia, an area in Central Tuscany (Italy) with a long history of landslides and erosive processes. We exploited outputs provided by interferometric processing of Sentinel-1 data to create ground deformation maps used to scan wide areas, flag unstable zones and support the definition of priorities starting from the situations deemed to be most urgent. A database of active moving areas has been created to support further activities of the project, including field surveys, further investigation with landscape investigations and modeling.Activities performed has been funded by MUR (Ministry of University in Italy) within the PRIN 2022 call Directive Decree n. 104 del 02/02/2022, Codice Progetto MUR 2022C2XPK7, “Full cOveRage, Multi-scAle and multi-sensor geomorphological map: a practical tool for TerrItOrial plaNning - FORMATION”- CUP B53D23007000006, that is included in within the activities funded by European Union (Next Generation EU).
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
An integrated GIS tool for gully erosion modelling
Gully erosion seriously affects the landscape and human life in different ways by destroying agricultural land and infrastructures, altering the hydraulic potential of soils, or affecting the water quality and quantity. Due to climate change, the negative effects of gully erosion are likely to increase in future, threatening especially low-income agricultural regions. In the past decades, quantitative methods have been proposed to simulate and predict gully erosion at different scales. However, gully erosion is still underrepresented in modern GIS-based modelling and simulation approaches. Therefore, we developed a tool to assess gully erosion dynamics. This tool comprises the data preparation, modelling and output analysis of the modelling phase as well as the visualization of the results. The modelling procedure is based on Sidorchuk’s gully simulation model. The tool was developed using phyton and the QGIS environment.
- 20 January 2025
- Published by Copernicus GmbH
Open AccessAn integrated GIS tool for gully erosion modelling
Gully erosion seriously affects the landscape and human life in different ways by destroying agricultural land and infrastructures, altering the hydraulic potential of soils, or affecting the water quality and quantity. Due to climate change, the negative effects of gully erosion are likely to increase in future, threatening especially low-income agricultural regions. In the past decades, quantitative methods have been proposed to simulate and predict gully erosion at different scales. However, gully erosion is still underrepresented in modern GIS-based modelling and simulation approaches. Therefore, we developed a tool to assess gully erosion dynamics. This tool comprises the data preparation, modelling and output analysis of the modelling phase as well as the visualization of the results. The modelling procedure is based on Sidorchuk’s gully simulation model. The tool was developed using phyton and the QGIS environment.
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
Investigating water erosion dynamics through connectivity based on fractal approaches: A case study in the Chianti area (Florence, Italy)
Water erosion is a current issue, especially in hilly and areas, where driving force such as surface runoff and subsurface flow can mobilize large amounts of sediment to rivers. In fact, how and at which timescale, seasonality precipitation is turned into runoff or streamflow (Q) it is difficult to be predicted without calibrating site-specific models. The potential soil erosion can be assessed through the study of the relationships between sediment sources and sinks in a watershed (i.e., sediment connectivity assessment) and associated suspended sediment (SS) transport in rivers. On the other hand, sediment connectivity, defined as structural (from a geomorphological point of view) and functional connectivity (considering forcing processes), can be evaluated by the using of specific indexes (e.g., Index of connectivity – IC). SS transport processes are intermittent processes fluctuating over a large range of temporal and spatial scales, making it challenging to develop predictive models applicable across timescales and rivers. While temporal variability in sediment transport is explained by the concept of “effective timescale of connectivity”; the mechanism behind this variability remains unknown. Here we used a data-driven approach considering two years of monitoring Q and SS to develop and demonstrate a proof of concept for automating the classification of event-based sediment dynamics by using a machine learning approach. For each storm event we i) calculate the sediment connectivity (extreme rainfall events also are considered) and ii) define the link between sediment transport and deposition by considering SS transport as a fractal system (i.e. fractal storage time distributions in streams). Fractals are here used to describe and predict patterns over different temporal scales of dynamics in SS The statistic and dynamics of Q, SSCs and associated grain size distribution, at event based, were considered by assessing their probability distribution function, Fourier power spectra, and the machine-learning classification of hysteresis index. Indeed, by approaching SS transport dynamics as a fractal system, it is assumed that patterns of variation in SS transport exist over different timescales, while linkages across those temporal scales are expressed as fractal power-laws. The study site, located near Florence in the Chianti area, is a 1 Km2 agricultural watershed with different types of land cover and characterize by a first-order mixed bedrock and alluvial stream channels. The area was mapped at high resolution with a Drone LIDAR scanner and equipped with a submersible laser diffraction particle size analyser (LISST) for long-term measuring suspended particle size and its volume concentration. Preliminary results showed a robust correlation between sediment connectivity, land cover, and sediment connectivity. Q-SS information flows exhibit seasonally varying behaviour consistent with dominant runoff generation mechanisms (catchment connectivity in wet to dry season). However, the timing and the magnitude of runoff also reflect considerable catchment heterogeneity, likely attributable to differences in baseflow contributions from different lithologies, and variation in of preferential flow paths (land use/land cover). In conclusion, this study allowed to analyse a small catchment area in term of sediment connectivity and related sediment transport to identify potential areas of (dis)connectivity in the basin.
- 20 January 2025
- Published by Copernicus GmbH
Open AccessInvestigating water erosion dynamics through connectivity based on fractal approaches: A case study in the Chianti area (Florence, Italy)
Water erosion is a current issue, especially in hilly and areas, where driving force such as surface runoff and subsurface flow can mobilize large amounts of sediment to rivers. In fact, how and at which timescale, seasonality precipitation is turned into runoff or streamflow (Q) it is difficult to be predicted without calibrating site-specific models. The potential soil erosion can be assessed through the study of the relationships between sediment sources and sinks in a watershed (i.e., sediment connectivity assessment) and associated suspended sediment (SS) transport in rivers. On the other hand, sediment connectivity, defined as structural (from a geomorphological point of view) and functional connectivity (considering forcing processes), can be evaluated by the using of specific indexes (e.g., Index of connectivity – IC). SS transport processes are intermittent processes fluctuating over a large range of temporal and spatial scales, making it challenging to develop predictive models applicable across timescales and rivers. While temporal variability in sediment transport is explained by the concept of “effective timescale of connectivity”; the mechanism behind this variability remains unknown. Here we used a data-driven approach considering two years of monitoring Q and SS to develop and demonstrate a proof of concept for automating the classification of event-based sediment dynamics by using a machine learning approach. For each storm event we i) calculate the sediment connectivity (extreme rainfall events also are considered) and ii) define the link between sediment transport and deposition by considering SS transport as a fractal system (i.e. fractal storage time distributions in streams). Fractals are here used to describe and predict patterns over different temporal scales of dynamics in SS The statistic and dynamics of Q, SSCs and associated grain size distribution, at event based, were considered by assessing their probability distribution function, Fourier power spectra, and the machine-learning classification of hysteresis index. Indeed, by approaching SS transport dynamics as a fractal system, it is assumed that patterns of variation in SS transport exist over different timescales, while linkages across those temporal scales are expressed as fractal power-laws. The study site, located near Florence in the Chianti area, is a 1 Km2 agricultural watershed with different types of land cover and characterize by a first-order mixed bedrock and alluvial stream channels. The area was mapped at high resolution with a Drone LIDAR scanner and equipped with a submersible laser diffraction particle size analyser (LISST) for long-term measuring suspended particle size and its volume concentration. Preliminary results showed a robust correlation between sediment connectivity, land cover, and sediment connectivity. Q-SS information flows exhibit seasonally varying behaviour consistent with dominant runoff generation mechanisms (catchment connectivity in wet to dry season). However, the timing and the magnitude of runoff also reflect considerable catchment heterogeneity, likely attributable to differences in baseflow contributions from different lithologies, and variation in of preferential flow paths (land use/land cover). In conclusion, this study allowed to analyse a small catchment area in term of sediment connectivity and related sediment transport to identify potential areas of (dis)connectivity in the basin.
- Open Access
Rare Earth Elements Distribution and Bacteriome to Assess and Characterize the Soil Landscapes of Old Olive Orchards
The presence of the olive tree in Tuscany, Italy, in its forms that have survived to the present day as an essential component of the landscape dates back many centuries. Global change is now threatening it. Therefore, it is important to find markers to enhance the olive tree environment in terms of its resilience. The aim of the research was to investigate the composition of soil bacteriomes in contrasting geochemical environments using a geochemistry approach based on the behavior of the REEs, inherited from parent rock material. Bacteriome assemblages and REE content were analyzed in 48 topsoils developed in six geochemical Tuscan environments. Combined geochemical, geoinformatic, and bioinformatic techniques highlighted the existence of four bacteriome assemblages depending on Light-REEs. Further results showed that the soil bioavailable fraction of REEs was related to parent rock materials, pH, and bacteriome composition. The most abundant bacteria were Microlunatus in graded fluvio-lacustrine soils, Gaiella in graded arenaceous soils, Bradyrizhobium in pyroclastic soils, and Rubrobacter in soils on gentle slopes of calcareous and carbonatic lithologies. This research represents a starting point to define new indicators able to assess the resilience of the olive trees in the Mediterranean landscape and characterize the territory of extra virgin olive oils.
Open AccessRare Earth Elements Distribution and Bacteriome to Assess and Characterize the Soil Landscapes of Old Olive Orchards
The presence of the olive tree in Tuscany, Italy, in its forms that have survived to the present day as an essential component of the landscape dates back many centuries. Global change is now threatening it. Therefore, it is important to find markers to enhance the olive tree environment in terms of its resilience. The aim of the research was to investigate the composition of soil bacteriomes in contrasting geochemical environments using a geochemistry approach based on the behavior of the REEs, inherited from parent rock material. Bacteriome assemblages and REE content were analyzed in 48 topsoils developed in six geochemical Tuscan environments. Combined geochemical, geoinformatic, and bioinformatic techniques highlighted the existence of four bacteriome assemblages depending on Light-REEs. Further results showed that the soil bioavailable fraction of REEs was related to parent rock materials, pH, and bacteriome composition. The most abundant bacteria were Microlunatus in graded fluvio-lacustrine soils, Gaiella in graded arenaceous soils, Bradyrizhobium in pyroclastic soils, and Rubrobacter in soils on gentle slopes of calcareous and carbonatic lithologies. This research represents a starting point to define new indicators able to assess the resilience of the olive trees in the Mediterranean landscape and characterize the territory of extra virgin olive oils.
- Open Access
- 20 January 2024
- Published by Elsevier in Ecological Indicators
- Vol. 158
Combining biodiversity and geodiversity on landscape scale: A novel approach using rare earth elements and spatial distribution models in an agricultural Mediterranean landscape
- 20 January 2024
- Published by Elsevier in Ecological Indicators
- Vol. 158
Open AccessCombining biodiversity and geodiversity on landscape scale: A novel approach using rare earth elements and spatial distribution models in an agricultural Mediterranean landscape