MSMaor Sela

Maor Sela

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Maor Sela has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Comment on egusphere-2026-6062

    by Maor Sela, Mathilde Ritman, Sadhitro De, Philip Stier

    Deep convective clouds (DCCs) transport heat, water, and momentum, affecting Earth’s radiative balance and water cycle. Aerosol particles influence these properties as cloud condensation nuclei, but how anthropogenic aerosols modify mixed-phase cloud microphysics and radiative effects remains unclear. Here, we investigate two sea-breeze-driven convection cases over Houston using high-resolution ICON-HAM-lite simulations, exploring present-day, cleaner, and more polluted conditions by scaling anthropogenic aerosol concentrations and emissions by factors of 3 and 0.3. We ran 10-member ensembles of 24-hour simulations with perturbed initial temperatures. As previous studies have shown, increased aerosols raise cloud droplet numbers and suppress warm rain formation. We further show that aerosols shift microphysics pathways by reducing riming and enhancing evaporation, ice nucleation, and depositional growth. These changes maintain more condensate in cloud ice and snow while reducing transfer to graupel and hail. Consequently, pollution strengthens both longwave warming and shortwave cooling, with shortwave cooling dominating in active convection. The principal responses are consistent across both cases, but their vertical and radiative expression varies with storm organisation: more organised storms produce larger anvils and more sustained cooling, while isolated storms have more heterogeneous cloud structures. In the most aerosol-rich simulations, the net radiative effect is also less robust because of greater ensemble spread during late-stage anvil dissipation. Overall, these results highlight the importance of competing mixed-phase microphysical processes when assessing aerosol effects on deep-convective clouds.

  • Open Access

    Aerosols perturb mixed-phase microphysics and anvil radiative effects in deep convection

    by Maor Sela, Mathilde Ritman, Sadhitro De, Philip Stier

    Deep convective clouds (DCCs) transport heat, water, and momentum, affecting Earth’s radiative balance and water cycle. Aerosol particles influence these properties as cloud condensation nuclei, but how anthropogenic aerosols modify mixed-phase cloud microphysics and radiative effects remains unclear. Here, we investigate two sea-breeze-driven convection cases over Houston using high-resolution ICON-HAM-lite simulations, exploring present-day, cleaner, and more polluted conditions by scaling anthropogenic aerosol concentrations and emissions by factors of 3 and 0.3. We ran 10-member ensembles of 24-hour simulations with perturbed initial temperatures. As previous studies have shown, increased aerosols raise cloud droplet numbers and suppress warm rain formation. We further show that aerosols shift microphysics pathways by reducing riming and enhancing evaporation, ice nucleation, and depositional growth. These changes maintain more condensate in cloud ice and snow while reducing transfer to graupel and hail. Consequently, pollution strengthens both longwave warming and shortwave cooling, with shortwave cooling dominating in active convection. The principal responses are consistent across both cases, but their vertical and radiative expression varies with storm organisation: more organised storms produce larger anvils and more sustained cooling, while isolated storms have more heterogeneous cloud structures. In the most aerosol-rich simulations, the net radiative effect is also less robust because of greater ensemble spread during late-stage anvil dissipation. Overall, these results highlight the importance of competing mixed-phase microphysical processes when assessing aerosol effects on deep-convective clouds.

  • Open Access

    Sensitivity of cloud structure and precipitation to cloud microphysics schemes in ICON and implications for global km-scale simulations

    by Maor Sela, Philipp Weiss, Philip Stier

    Cloud microphysics remains a major source of uncertainty in km-scale atmospheric models. While cloud-resolving models have advanced our understanding of cloud-climate interactions, their predictability remains limited. Most studies have examined either microphysics schemes or domain-size sensitivities, but their interactions are poorly understood. This study examines cloud structure and precipitation sensitivity to microphysics schemes and how they vary between regional and global configurations within a single, consistent modelling framework. We analyse three convection-permitting simulations over the Amazon: two regional runs employing single- and double-moment microphysics schemes and a global single-moment run, with all other configurations consistent. We find that cloud hydrometeor characteristics are sensitive to the microphysics scheme. Specifically, the double-moment scheme produces up to five times more graupel and twice as much rain, but half as much cloud water and one-fifth as much fog as the single-moment scheme. Despite these differences, precipitation, water vapour, and outgoing longwave radiation remain consistent across schemes, suggesting large-scale constraints primarily govern integrated quantities. Furthermore, domain configuration further amplifies sensitivities. The global simulation exhibits up to 150 % more fog and nearly double the cloud ice compared to the regional single-moment run, highlighting the role of large-scale circulation and lateral boundary conditions. These findings demonstrate that microphysics schemes primarily influence cloud processes, while the domain setup determines how these sensitivities manifest. Improved observational constraints and perturbed-parameter ensembles are therefore needed to evaluate model performance, assess the broader generalisability of these findings and separate tuning effects and structural uncertainty.

  • Open Access

    Reply on RC1

    by Maor Sela, Philipp Weiss, Philip Stier

    Cloud microphysics remains a major source of uncertainty in km-scale atmospheric models. While cloud-resolving models have advanced our understanding of cloud-climate interactions, their predictability remains limited. Most studies have examined either microphysics schemes or domain-size sensitivities, but their interactions are poorly understood. This study examines cloud structure and precipitation sensitivity to microphysics schemes and how they vary between regional and global configurations within a single, consistent modelling framework. We analyse three convection-permitting simulations over the Amazon: two regional runs employing single- and double-moment microphysics schemes and a global single-moment run, with all other configurations consistent. We find that cloud hydrometeor characteristics are sensitive to the microphysics scheme. Specifically, the double-moment scheme produces up to five times more graupel and 100 % more rainfall, but twice as much cloud water and five times as much fog as the single-moment scheme. Despite these variations, precipitation, water vapour, and outgoing longwave radiation remain consistent across schemes, suggesting large-scale constraints primarily govern integrated quantities. Furthermore, domain configuration amplifies sensitivities. The global simulation exhibits up to 150 % more fog and nearly double the cloud ice compared to the regional single-moment run, highlighting the role of large-scale circulation and lateral boundary conditions. These findings demonstrate that microphysics schemes influence cloud processes, while the domain setup determines how these sensitivities manifest. Improved observational constraints and perturbed-parameter ensembles are therefore needed to evaluate model performance and separate tuning effects and structural uncertainty.

  • Open Access

    Comment on egusphere-2025-5803

    by Maor Sela, Philipp Weiss, Philip Stier

    Cloud microphysics remains a major source of uncertainty in km-scale atmospheric models. While cloud-resolving models have advanced our understanding of cloud-climate interactions, their predictability remains limited. Most studies have examined either microphysics schemes or domain-size sensitivities, but their interactions are poorly understood. This study examines cloud structure and precipitation sensitivity to microphysics schemes and how they vary between regional and global configurations within a single, consistent modelling framework. We analyse three convection-permitting simulations over the Amazon: two regional runs employing single- and double-moment microphysics schemes and a global single-moment run, with all other configurations consistent. We find that cloud hydrometeor characteristics are sensitive to the microphysics scheme. Specifically, the double-moment scheme produces up to five times more graupel and 100 % more rainfall, but twice as much cloud water and five times as much fog as the single-moment scheme. Despite these variations, precipitation, water vapour, and outgoing longwave radiation remain consistent across schemes, suggesting large-scale constraints primarily govern integrated quantities. Furthermore, domain configuration amplifies sensitivities. The global simulation exhibits up to 150 % more fog and nearly double the cloud ice compared to the regional single-moment run, highlighting the role of large-scale circulation and lateral boundary conditions. These findings demonstrate that microphysics schemes influence cloud processes, while the domain setup determines how these sensitivities manifest. Improved observational constraints and perturbed-parameter ensembles are therefore needed to evaluate model performance and separate tuning effects and structural uncertainty.

  • Open Access

    Aerosol effects on deep convective cloud microphysics and anvil lifecycle during TRACER using ICON HAM-lite

    by Maor Sela, Mathilde Ritman, Sadhitro De, Philip Stier

    The radiative response of deep convective anvil clouds to anthropogenic aerosols is a major source of uncertainty. While aerosol-cloud interactions (ACI) in the convective core have been extensively studied, the microphysical mechanisms governing the full anvil lifecycle, from detrainment to dissipation, remain poorly constrained.This study examines the Cloud Radiative Effect (CRE) of deep convection through a microphysical process-rate lens. We perform three regional simulations with interactive aerosol using ICON-HAM-lite, comprising baseline, clean, and polluted runs. The simulations follow the TRACER-MIP protocol for a sea-breeze event over Houston, Texas. Using Lagrangian tracking with the tobac cloud tracking algorithm, we isolate individual convective cells and track their evolution from convective onset to the detrainment and dissipation of the resulting anvils. We then assess aerosol-cloud interactions over the lifecycle of the tracked cells by aligning their evolution with the onset of freezing, to ensure a consistent lifecycle comparison.Our results show that a 9-fold increase in aerosol concentration leads to a 2.5-fold increase in cloud droplet number concentration (CDNC). This suppresses warm-rain processes and enhances upward mass flux above the melting layer. As a result, it also lofts higher droplet concentrations, which can shape anvil characteristics by modulating the total ice surface area available for deposition and the net cross-section for riming. This creates a competition between enhanced riming, which promotes mass fallout, and increased vapour deposition, which sustains smaller ice crystals aloft. We conclude by investigating how these competing factors change the lifetime of the anvil and its net CRE.

  • Open Access

    Anthropogenic perturbations to anvil cloud radiative effects?

    by Philip Stier, William Jones, Mathilde Ritman, Maor Sela, Sadhitro De

    The top-of-atmosphere net radiative effect of convective anvils is estimated to be close to zero and arises from a balance of significant short-wave cooling and long-wave warming over a complex diurnal cycle. When anvils are optically thick, the cooling due to daytime scattering of shortwave solar radiation dominates. In contrast, optically thin anvils have weaker scattering of solar radiation, so longwave warming becomes the dominant effect. Hence, it is essential to understand the controls of anvil radiative properties over the convective lifecycle, which arises from a complex interplay of convective cloud dynamics and microphysics. The convective mass flux modulates anvil extent, and changes in ice crystal size and morphology affect anvil lifetime and radiative properties. Convective anvils have been proposed to respond to global warming (cloud feedbacks) and anthropogenic aerosols (aerosol-cloud interactions). However, the associated uncertainties remain large and key relevant processes are not represented in the current generation of climate models. Emerging kilometre-scale climate models present new opportunities to examine these effects at the process level.In this work we bring together multiple research strands to quantify the controls of convective anvil clouds and associated radiative effects over the convective lifecycle towards understanding its sensitivity to climate and air pollution changes. We use the tobac cloud tracking framework to track convective cores and associated anvils in 4D across regional and global km-scale ICON model simulations which allows us to quantify the link between convective mass flux, anvil extent and anvil radiative properties. We apply this framework to regional high-resolution simulation of ICON coupled to HAM-lite, our reduced complexity aerosol model derived from the microphysical aerosol scheme HAM [Weiss et al., GMD, 2025], to explore the sensitivity of anvils and their radiative effects to aerosol perturbations in the context of the ORCHESTRA/EarthCARE Model Intercomparison Project (ECOMIP) as well as the TRACER campaign MIP. We find that an increase in aerosol increases cloud droplet numbers, suppresses warm rain formation, increases convective mass flux and thereby upper tropospheric ice water content and will discuss how these changes translate into anvil cloud radiative effects. Prototype next generation km-scale climate models are implicitly already including such anvil radiative effects; however, these currently remain unconstrained by observations. We develop novel observational constraints on the convective anvil cloud lifecycle through consistent tracking of convection using the tobac-flow cloud tracking framework [Jones et al., 2024] between MSG SEVIRI observations and forward simulated geostationary satellite radiances from ICON model output. This reveals that deep convective systems in ICON grow too fast and show a faster dissipation of thick to thin anvils than observations, which affects their radiative effects. Our work provides novel approaches to improve our understanding of aerosol effects on convective clouds and climate.

  • Open Access

    Comment on egusphere-2025-5803

    by Maor Sela, Philipp Weiss, Philip Stier

    Cloud microphysics remains a major source of uncertainty in km-scale atmospheric models. While cloud-resolving models have advanced our understanding of cloud-climate interactions, their predictability remains limited. Most studies have examined either microphysics schemes or domain-size sensitivities, but their interactions are poorly understood. This study examines cloud structure and precipitation sensitivity to microphysics schemes and how they vary between regional and global configurations within a single, consistent modelling framework. We analyse three convection-permitting simulations over the Amazon: two regional runs employing single- and double-moment microphysics schemes and a global single-moment run, with all other configurations consistent. We find that cloud hydrometeor characteristics are sensitive to the microphysics scheme. Specifically, the double-moment scheme produces up to five times more graupel and 100 % more rainfall, but twice as much cloud water and five times as much fog as the single-moment scheme. Despite these variations, precipitation, water vapour, and outgoing longwave radiation remain consistent across schemes, suggesting large-scale constraints primarily govern integrated quantities. Furthermore, domain configuration amplifies sensitivities. The global simulation exhibits up to 150 % more fog and nearly double the cloud ice compared to the regional single-moment run, highlighting the role of large-scale circulation and lateral boundary conditions. These findings demonstrate that microphysics schemes influence cloud processes, while the domain setup determines how these sensitivities manifest. Improved observational constraints and perturbed-parameter ensembles are therefore needed to evaluate model performance and separate tuning effects and structural uncertainty.

  • Open Access

    Sensitivity of cloud structure and precipitation to cloud microphysics schemes in ICON and implications for global km-scale simulations

    by Maor Sela, Philipp Weiss, Philip Stier

    Cloud microphysics remains a major source of uncertainty in km-scale atmospheric models. While cloud-resolving models have advanced our understanding of cloud-climate interactions, their predictability remains limited. Most studies have examined either microphysics schemes or domain-size sensitivities, but their interactions are poorly understood. This study examines cloud structure and precipitation sensitivity to microphysics schemes and how they vary between regional and global configurations within a single, consistent modelling framework. We analyse three convection-permitting simulations over the Amazon: two regional runs employing single- and double-moment microphysics schemes and a global single-moment run, with all other configurations consistent. We find that cloud hydrometeor characteristics are sensitive to the microphysics scheme. Specifically, the double-moment scheme produces up to five times more graupel and 100 % more rainfall, but twice as much cloud water and five times as much fog as the single-moment scheme. Despite these variations, precipitation, water vapour, and outgoing longwave radiation remain consistent across schemes, suggesting large-scale constraints primarily govern integrated quantities. Furthermore, domain configuration amplifies sensitivities. The global simulation exhibits up to 150 % more fog and nearly double the cloud ice compared to the regional single-moment run, highlighting the role of large-scale circulation and lateral boundary conditions. These findings demonstrate that microphysics schemes influence cloud processes, while the domain setup determines how these sensitivities manifest. Improved observational constraints and perturbed-parameter ensembles are therefore needed to evaluate model performance and separate tuning effects and structural uncertainty.


  • Open Access

    Anthropogenic aerosol effects on convective clouds and precipitation in global km-scale simulations with ICON-HAM-lite 

    by Philip Stier, Philipp Weiss, Sadhitro De, Maor Sela, William Jones

    Aerosol effects on convective clouds and precipitation mediated via radiative and microphysical perturbations remain highly uncertain. Microphysical perturbations are generally not included in current climate models due to the simplified representation of convective clouds in existing parameterisations. Progress has been made through regional cloud resolving modelling; however, such simulations often neglect energy and water budget constraints and the coupling to larger scales. The emergence of global km-scale climate models provides a significant opportunity to advance our understanding of aerosol-convection interactions, but the inclusion of prognostic aerosols has been limited previously by their high computational demands.Here we present results from global km-scale atmospheric model simulations using ICON coupled to HAM-lite, a new reduced complexity aerosol model derived from the microphysical aerosol scheme HAM, suitable for global km-scale simulations [Weiss et al., GMD Discussions, 2024]. Performing aerosol perturbation experiments with pre-industrial and present-day aerosol emissions allows us to isolate anthropogenic aerosol effects on convective clouds and precipitation globally. As a first step, we compare simulated perturbations in terms of radiative (aerosol optical depth) and microphysical (cloud droplet number concentrations) against a set of observationally constrained idealised perturbations [Herbert et al., ACP Discussions, 2024]. This will allow us to put simulated cloud and precipitation responses in the simulations in the context of the perturbation strength.Comparison of our global km-scale simulations with prognostic aerosols with idealised simulations with prescribed aerosols [Herbert et al., 2024] provides a first insight into the effect of simulating global aerosols at the km-scale. Ultimately, this work offers a new way to study anthropogenic aerosol effects on convective clouds and precipitation globally, including microphysical and radiative perturbations, the diurnal cycle of convection, the coupling to the global circulation and regional climate.