Chloe Korbel
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Chloe Korbel has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
I.V. Filippova
5 shared publications- Lev Odiseevitch Filippov
CNRS, GeoRessources
4 shared publications B. Demeusy
2 shared publications- Cécile Fabre
GeoRessources, Faculté des Sciences et Technologies, Université de Lorraine, CNRS, F-54506 Vandœuvre-lès-Nancy, France
2 shared publications E. Betend
2 shared publicationsJ. Cauzid
2 shared publications
Latest Publications
- Open Access
- 17 June 2026
- Published by Elsevier in Minerals Engineering
- Vol. 247
Enhancing lithium grade and recovery in conventional flotation cells via coarse particle flotation of lepidolite
- 17 June 2026
- Published by Elsevier in Minerals Engineering
- Vol. 247
Open AccessEnhancing lithium grade and recovery in conventional flotation cells via coarse particle flotation of lepidolite
- 8 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Geometallurgical evaluation of Li recovery by flotation from rare metal granites : mineralogical and textural variability study
Évaluation géométallurgique de récupération du Li par flottation à partir des granites à métaux rares : étude des variabilités minéralogiques et texturales: Le lithium, essentiel à la transition énergétique, a été reconnu par la Commission européenne comme matière première critique. Cependant, bien que l'Europe dispose de gisements significatifs de lithium, ceux-ci sont inexploités. Les principaux gisements européens, constitués de granites à métaux rares et de pegmatites, contiennent des micas lithinifères tels que le lépidolite et la zinnwaldite. Toutefois, ces minéraux présentent deux défis principaux : des teneurs en lithium inférieures en comparaison avec le spodumène, et des procédés d'extraction métallurgique complexes et coûteux. Le développement de méthodes innovantes de concentration minérale, économes en énergie et respectueuses de l'environnement, apparait donc comme crucial pour valoriser ces gisements. Ce projet de thèse se concentre sur le développement de tels procédés en prenant pour cas d'étude le granite de Beauvoir, gisement de classe mondiale de lithium situé dans l'Allier, en France. Ce projet s'articule autour de trois axes. Le premier est la caractérisation minéralogique et géochimique fine des échantillons, depuis les carottes jusqu'aux produits de séparation minérale. Le second est le développement du procédé de récupération du lépidolite. Plusieurs hypothèses concernant la valorisation de ce mica lithinifère sont testées : la valorisation à la maille de libération du lépidolite et la valorisation des particules grossières, possiblement non libérées, pour réduire les coûts de concassage-broyage. Enfin, des efforts sont donc déployés pour affiner les connaissances sur les propriétés de surface du lépidolite. La caractérisation des échantillons a révélé que ce granite contient plusieurs micas de la série muscovite-lépidolite. Des mesures ponctuelles de teneur en lithium ont démontré que le lépidolite est le principal porteur de lithium, tandis que la muscovite ne présente pas de concentration notable en lithium. En outre, ces minéraux sont tous les deux présents dans les concentrés de flottation. Les essais de flottation ont montré que la concentration du lépidolite dépend principalement du dosage des amines et du pH de la suspension. Un pH acide, autour de 2, permet d'obtenir une meilleure sélectivité. Après optimisation, un concentré contenant entre 3,9 et 4,0% Li₂O, avec une récupération supérieure à 70% de Li₂O est obtenu. Les essais de flottation en milieu neutre ont montré des performances similaires à celles obtenues en milieu acide. Ainsi, un procédé plus respectueux de l'environnement et moins coûteux semble viable. En outre, ces résultats sont soutenus par les travaux de caractérisation de surface du lépidolite réalisés. En conclusion, ce travail de thèse a permis d'améliorer la compréhension des gisements de lépidolite et leur valorisation, en se basant sur le cas d'étude du granite de Beauvoir. Une caractérisation fine a permis de contraindre le contenu en lithium et les phases minérales porteuses. Le schéma de traitement développé permet d'obtenir un concentré apte à être soumis aux étapes de métallurgie extractive, pour produire des produits lithinifères de « qualité batterie ». Ce travail a permis le développement d'un procédé économique, écologique et durable de récupération du lépidolite.
- 8 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Geometallurgical evaluation of Li recovery by flotation from rare metal granites : mineralogical and textural variability study
Évaluation géométallurgique de récupération du Li par flottation à partir des granites à métaux rares : étude des variabilités minéralogiques et texturales: Le lithium, essentiel à la transition énergétique, a été reconnu par la Commission européenne comme matière première critique. Cependant, bien que l'Europe dispose de gisements significatifs de lithium, ceux-ci sont inexploités. Les principaux gisements européens, constitués de granites à métaux rares et de pegmatites, contiennent des micas lithinifères tels que le lépidolite et la zinnwaldite. Toutefois, ces minéraux présentent deux défis principaux : des teneurs en lithium inférieures en comparaison avec le spodumène, et des procédés d'extraction métallurgique complexes et coûteux. Le développement de méthodes innovantes de concentration minérale, économes en énergie et respectueuses de l'environnement, apparait donc comme crucial pour valoriser ces gisements. Ce projet de thèse se concentre sur le développement de tels procédés en prenant pour cas d'étude le granite de Beauvoir, gisement de classe mondiale de lithium situé dans l'Allier, en France. Ce projet s'articule autour de trois axes. Le premier est la caractérisation minéralogique et géochimique fine des échantillons, depuis les carottes jusqu'aux produits de séparation minérale. Le second est le développement du procédé de récupération du lépidolite. Plusieurs hypothèses concernant la valorisation de ce mica lithinifère sont testées : la valorisation à la maille de libération du lépidolite et la valorisation des particules grossières, possiblement non libérées, pour réduire les coûts de concassage-broyage. Enfin, des efforts sont donc déployés pour affiner les connaissances sur les propriétés de surface du lépidolite. La caractérisation des échantillons a révélé que ce granite contient plusieurs micas de la série muscovite-lépidolite. Des mesures ponctuelles de teneur en lithium ont démontré que le lépidolite est le principal porteur de lithium, tandis que la muscovite ne présente pas de concentration notable en lithium. En outre, ces minéraux sont tous les deux présents dans les concentrés de flottation. Les essais de flottation ont montré que la concentration du lépidolite dépend principalement du dosage des amines et du pH de la suspension. Un pH acide, autour de 2, permet d'obtenir une meilleure sélectivité. Après optimisation, un concentré contenant entre 3,9 et 4,0% Li₂O, avec une récupération supérieure à 70% de Li₂O est obtenu. Les essais de flottation en milieu neutre ont montré des performances similaires à celles obtenues en milieu acide. Ainsi, un procédé plus respectueux de l'environnement et moins coûteux semble viable. En outre, ces résultats sont soutenus par les travaux de caractérisation de surface du lépidolite réalisés. En conclusion, ce travail de thèse a permis d'améliorer la compréhension des gisements de lépidolite et leur valorisation, en se basant sur le cas d'étude du granite de Beauvoir. Une caractérisation fine a permis de contraindre le contenu en lithium et les phases minérales porteuses. Le schéma de traitement développé permet d'obtenir un concentré apte à être soumis aux étapes de métallurgie extractive, pour produire des produits lithinifères de « qualité batterie ». Ce travail a permis le développement d'un procédé économique, écologique et durable de récupération du lépidolite.
- Open Access
- 25 February 2026
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 14 (2)
An environmental-friendly route to recover lepidolite from the Beauvoir granite by flotation
- 25 February 2026
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 14 (2)
Open AccessAn environmental-friendly route to recover lepidolite from the Beauvoir granite by flotation
- Open Access
- 18 February 2026
- Published by Elsevier in Minerals Engineering
- Vol. 241
Data fusion method to identify light elements bearing minerals from the Li-Beauvoir granite based on SEM, µXRF, and µLIBS
- 18 February 2026
- Published by Elsevier in Minerals Engineering
- Vol. 241
Open AccessData fusion method to identify light elements bearing minerals from the Li-Beauvoir granite based on SEM, µXRF, and µLIBS
- Open Access
- 5 December 2025
- Published by Elsevier in Minerals Engineering
- Vol. 237
Hydrodynamic and physicochemical strategies for optimizing lepidolite recovery from the Beauvoir granite
- 5 December 2025
- Published by Elsevier in Minerals Engineering
- Vol. 237
Open AccessHydrodynamic and physicochemical strategies for optimizing lepidolite recovery from the Beauvoir granite
- Open Access
- 21 February 2025
- Published by Elsevier in Minerals Engineering
- Vol. 225
Flowsheet development for the selective flotation of lepidolite from the Beauvoir granite from mineralogical insights
- 21 February 2025
- Published by Elsevier in Minerals Engineering
- Vol. 225
Open AccessFlowsheet development for the selective flotation of lepidolite from the Beauvoir granite from mineralogical insights
- Open Access
Thermodynamic Modeling and Experimental Validation for Thermal Beneficiation of Tungsten-Bearing Materials
Tungsten (W), a rare metal, is categorized as a Critical and Strategic Raw Material (CRM) by the European Union (EU), with the highest economic importance of all selected CRMs since 2014. Tungsten and its derivatives are extracted from their commercial raw materials, mainly wolframite [(Fe,Mn)WO4] and scheelite (CaWO4) ores. Subsequently to mining and mineral processing, the W ore is submitted to thermal treatment and hydrometallurgy under aggressive conditions (high pressure and temperature), which are usually applied for the extraction of tungsten compounds. This paper aims to investigate a thermal route for scheelite processing using various selected chemical agents, resulting in a W-bearing material that is capable of being leached under softer conditions. In this context, a thermodynamic study of the interaction between FeWO4, MnWO4 and CaWO4 and various chemical reagents is described. The thermochemical calculations and data modeling show that, among other considerations, the reaction of CaWO4 with magnesium chloride (MgCl2) can lead to the formation of magnesium tungsten oxide (MgWO4), which appears to be more easily leachable than CaWO4. Experimental tests of the reaction of scheelite with MgCl2 appear to validate the thermodynamic predictions with satisfactory process kinetics at temperatures from 725 to 775 °C.
Open AccessThermodynamic Modeling and Experimental Validation for Thermal Beneficiation of Tungsten-Bearing Materials
Tungsten (W), a rare metal, is categorized as a Critical and Strategic Raw Material (CRM) by the European Union (EU), with the highest economic importance of all selected CRMs since 2014. Tungsten and its derivatives are extracted from their commercial raw materials, mainly wolframite [(Fe,Mn)WO4] and scheelite (CaWO4) ores. Subsequently to mining and mineral processing, the W ore is submitted to thermal treatment and hydrometallurgy under aggressive conditions (high pressure and temperature), which are usually applied for the extraction of tungsten compounds. This paper aims to investigate a thermal route for scheelite processing using various selected chemical agents, resulting in a W-bearing material that is capable of being leached under softer conditions. In this context, a thermodynamic study of the interaction between FeWO4, MnWO4 and CaWO4 and various chemical reagents is described. The thermochemical calculations and data modeling show that, among other considerations, the reaction of CaWO4 with magnesium chloride (MgCl2) can lead to the formation of magnesium tungsten oxide (MgWO4), which appears to be more easily leachable than CaWO4. Experimental tests of the reaction of scheelite with MgCl2 appear to validate the thermodynamic predictions with satisfactory process kinetics at temperatures from 725 to 775 °C.
- Open Access
- 11 January 2025
- Published by Elsevier in Surfaces and Interfaces
- Vol. 58
Investigation of lepidolite surface properties: Insights from solid-gas and solid-liquid interfaces analyses
- 11 January 2025
- Published by Elsevier in Surfaces and Interfaces
- Vol. 58
Open AccessInvestigation of lepidolite surface properties: Insights from solid-gas and solid-liquid interfaces analyses
- 2 May 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Analytical Atomic Spectrometry
- Vol. 39 (7) , 1838-1853
Quantification of lithium using handheld instruments: application of LIBS and XRF spectroscopy to assay the lithium content of mineral processing products
This study aimed to understand the distribution of lithium and other elements in the Beauvoir granite, which is a granite enriched in lithium (Li), tin (Sn), niobium (Nb) and tantalum (Ta), and develop a reliable method for lithium quantification. These granite samples underwent various mineral processing techniques to produce a large dataset with different lithium concentrations and different mineral matrices. Thin sections were analysed using optical microscopy and micro X-ray fluorescence imaging to determine the distribution of potassium (K), rubidium (Rb), and cesium (Cs) in different mineral phases. Both energy dispersive X-ray fluorescence (ED-XRF) and laser induced breakdown spectroscopy (LIBS) measurements were conducted using handheld instruments on the same samples. The different resulting spectra were used to develop a predictive model for lithium content according to the whole rock estimates. Principal component analysis (PCA) and biplot analysis were used to identify correlations between elemental composition and lithium content; multiple linear regression was employed to establish a regression model for lithium quantification. Residual analysis and various statistical metrics, including R2, root mean squared error, and mean absolute percentage error, were used to assess the accuracy and performance of the models. In summary, this study highlights that for high lithium grade samples, ED-XRF can be preferred over LIBS as it requires less time for both sample preparation and analysis. However, this lithium assay is indirect, whereas for low lithium grade samples (2O), LIBS should be preferred to ensure a robust lithium assay method.
- 2 May 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Analytical Atomic Spectrometry
- Vol. 39 (7) , 1838-1853
Quantification of lithium using handheld instruments: application of LIBS and XRF spectroscopy to assay the lithium content of mineral processing products
This study aimed to understand the distribution of lithium and other elements in the Beauvoir granite, which is a granite enriched in lithium (Li), tin (Sn), niobium (Nb) and tantalum (Ta), and develop a reliable method for lithium quantification. These granite samples underwent various mineral processing techniques to produce a large dataset with different lithium concentrations and different mineral matrices. Thin sections were analysed using optical microscopy and micro X-ray fluorescence imaging to determine the distribution of potassium (K), rubidium (Rb), and cesium (Cs) in different mineral phases. Both energy dispersive X-ray fluorescence (ED-XRF) and laser induced breakdown spectroscopy (LIBS) measurements were conducted using handheld instruments on the same samples. The different resulting spectra were used to develop a predictive model for lithium content according to the whole rock estimates. Principal component analysis (PCA) and biplot analysis were used to identify correlations between elemental composition and lithium content; multiple linear regression was employed to establish a regression model for lithium quantification. Residual analysis and various statistical metrics, including R2, root mean squared error, and mean absolute percentage error, were used to assess the accuracy and performance of the models. In summary, this study highlights that for high lithium grade samples, ED-XRF can be preferred over LIBS as it requires less time for both sample preparation and analysis. However, this lithium assay is indirect, whereas for low lithium grade samples (2O), LIBS should be preferred to ensure a robust lithium assay method.
- Open Access
- 11 March 2024
- Published by Copernicus GmbH
Enhancing Lepidolite Recovery from Beauvoir (Li, Be, F) Rare Metals Granite through Advanced LIBS Mapping Techniques
The ongoing global energy transformation heavily relies on a steady supply of metals and minerals. Amonh all, lithium occupies a crucial role in facilitating this transition, particularly in energy storage through Li-ion batteries. Consequently, lepidolite, a lithium-bearing phyllosilicate, has emerged as a promising source of lithium for European countries. Notably, lepidolite is enriched in the Beauvoir granite of Allier, France, which also contains other critical elements, including fluorine, tin, niobium, tantalum, and beryllium. This valuable mineral is concentrated from other silicates using froth flotation with amine under acidic conditions.In this study, we explore the liberation of lepidolite, focusing on its significant shape factor, and the impact of size fraction on lithium recovery. Four different size fractions (<180, <250, <355, and <500 µm) undergo a standardized beneficiation route, encompassing crushing, grinding, desliming, flotation, and centrifugal separation. By employing mineralogical studies and automated mineralogy methods, the limitations of the flowsheet are identified. Particularly, the integration of Laser-Induced Breakdown Spectroscopy (LIBS) mapping enables precise elemental distribution analysis of Li, F, and Be, which conventional methods like SEM or µXRF cannot provide. This powerful tool allows to effectively differentiate lepidolite from muscovite or other gangue minerals through the computation of lithium and fluorine distributions. Utilizing the LIBS mapping technique, we assess the successful liberation of lepidolite, while also uncovering scientific and technical constraints. Furthermore, by applying LIBS mapping to non-floated products, we can precise the contribution of amblygonite, a lithium-bearing phosphate present in the Beauvoir granite, during the flotation stage.The findings from this study shed light on the strengths and limitations of the developed flowsheet, leading to a comprehensive understanding and potential enhancement of the process recovery of lepidolite and by-products from the Beauvoir granite in different streams. Ultimately, this research contributes to the sustainable supply of lithium, vital for advancing Europe's clean energy ambitions.
- 11 March 2024
- Published by Copernicus GmbH
Open AccessEnhancing Lepidolite Recovery from Beauvoir (Li, Be, F) Rare Metals Granite through Advanced LIBS Mapping Techniques
The ongoing global energy transformation heavily relies on a steady supply of metals and minerals. Amonh all, lithium occupies a crucial role in facilitating this transition, particularly in energy storage through Li-ion batteries. Consequently, lepidolite, a lithium-bearing phyllosilicate, has emerged as a promising source of lithium for European countries. Notably, lepidolite is enriched in the Beauvoir granite of Allier, France, which also contains other critical elements, including fluorine, tin, niobium, tantalum, and beryllium. This valuable mineral is concentrated from other silicates using froth flotation with amine under acidic conditions.In this study, we explore the liberation of lepidolite, focusing on its significant shape factor, and the impact of size fraction on lithium recovery. Four different size fractions (<180, <250, <355, and <500 µm) undergo a standardized beneficiation route, encompassing crushing, grinding, desliming, flotation, and centrifugal separation. By employing mineralogical studies and automated mineralogy methods, the limitations of the flowsheet are identified. Particularly, the integration of Laser-Induced Breakdown Spectroscopy (LIBS) mapping enables precise elemental distribution analysis of Li, F, and Be, which conventional methods like SEM or µXRF cannot provide. This powerful tool allows to effectively differentiate lepidolite from muscovite or other gangue minerals through the computation of lithium and fluorine distributions. Utilizing the LIBS mapping technique, we assess the successful liberation of lepidolite, while also uncovering scientific and technical constraints. Furthermore, by applying LIBS mapping to non-floated products, we can precise the contribution of amblygonite, a lithium-bearing phosphate present in the Beauvoir granite, during the flotation stage.The findings from this study shed light on the strengths and limitations of the developed flowsheet, leading to a comprehensive understanding and potential enhancement of the process recovery of lepidolite and by-products from the Beauvoir granite in different streams. Ultimately, this research contributes to the sustainable supply of lithium, vital for advancing Europe's clean energy ambitions.