Yaneli Reséndiz-Trejo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yaneli Reséndiz-Trejo has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Félix Sánchez De Jesús
Universidad Autónoma del Estado de Hidalgo
7 shared publications - Ana María Bolarín Miró
Universidad Autónoma del Estado de Hidalgo
6 shared publications - Luis Gerardo Betancourt Cantera
Universidad Autónoma del Estado de Hidalgo
6 shared publications - Claudia Alicia Cortes Escobedo
Centro de Investigación e Innovación Tecnológica, Instituto Politécnico Nacional
5 shared publications - María Isabel Reyes-Valderrama
Universidad Autónoma del Estado de Hidalgo
3 shared publications - Christian Ivan Enriquez Flores
CINVESTAV Unidad Querétaro, Lib. Norponiente 2000, Real de Juriquilla, 76230 Querétaro, Qro., Mexico
2 shared publications
Latest Publications
- Open Access
- 29 July 2026
- Published by Elsevier in SSRN Electronic Journal
Adsorption and Solar-Driven Photocatalytic Removal of Cephalexin from Water over Zn-Based Materials: Influence of the Synthesis Route
The presence of antibiotic residues in aquatic environments represents a major environmental concern due to their persistence and contribution to antimicrobial resistance. In this work, Zn-based materials synthesized via different routes were investigated for the removal of cephalexin (CPHX) through combined adsorption and photocatalytic degradation. ZnO-E was prepared via an electrochemical route, while ZnO-M was obtained from the thermal conversion of MOF-5. Characterization revealed significant differences in crystallinity, defect density, and charge carrier dynamics between the materials. Despite its lower surface area, ZnO-E exhibited superior photocatalytic performance, achieving ~90% CPHX removal under UV-A irradiation and higher apparent rate constants than ZnO-M. Photocatalytic activity under visible light was negligible, whereas simulated solar irradiation significantly enhanced degradation efficiency (kobs = 0.020 min-1). Mechanistic studies indicated that photogenerated holes and hydroxyl radicals are the dominant oxidative species. ZnO-E also maintained significant activity in real wastewater despite matrix effects. These findings highlight the key role of the synthesis route in tuning ZnO properties and demonstrate the potential of ZnO-E for solar-driven and sustainable antibiotic removal from water.
- 29 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessAdsorption and Solar-Driven Photocatalytic Removal of Cephalexin from Water over Zn-Based Materials: Influence of the Synthesis Route
The presence of antibiotic residues in aquatic environments represents a major environmental concern due to their persistence and contribution to antimicrobial resistance. In this work, Zn-based materials synthesized via different routes were investigated for the removal of cephalexin (CPHX) through combined adsorption and photocatalytic degradation. ZnO-E was prepared via an electrochemical route, while ZnO-M was obtained from the thermal conversion of MOF-5. Characterization revealed significant differences in crystallinity, defect density, and charge carrier dynamics between the materials. Despite its lower surface area, ZnO-E exhibited superior photocatalytic performance, achieving ~90% CPHX removal under UV-A irradiation and higher apparent rate constants than ZnO-M. Photocatalytic activity under visible light was negligible, whereas simulated solar irradiation significantly enhanced degradation efficiency (kobs = 0.020 min-1). Mechanistic studies indicated that photogenerated holes and hydroxyl radicals are the dominant oxidative species. ZnO-E also maintained significant activity in real wastewater despite matrix effects. These findings highlight the key role of the synthesis route in tuning ZnO properties and demonstrate the potential of ZnO-E for solar-driven and sustainable antibiotic removal from water.
- 19 June 2026
- Published by Elsevier in Ceramics International
- Vol. 52 (21) , 38352-38364
Enhanced dielectric breakdown strength and energy-storage performance in Zr-substituted high-entropy relaxor ferroelectrics
- 19 June 2026
- Published by Elsevier in Ceramics International
- Vol. 52 (21) , 38352-38364
Enhanced dielectric breakdown strength and energy-storage performance in Zr-substituted high-entropy relaxor ferroelectrics
- Open Access
- 28 February 2026
- Published by Elsevier in SSRN Electronic Journal
Enhancement in energy efficiency in high entropy relaxor ferroelectric ceramics
In this study, we demonstrate the enhancement of dielectric breakdown strength and energy‐storage performance in a high-entropy relaxor ferroelectric ATiO3 ceramic achieved by substituting zirconium for titanium sites. Using high-energy ball milling followed by controlled sintering, a high-entropy composition was successfully synthesized in which Ti4+ was partially substituted by Zr4+. This substitution promotes the formation of secondary phases that disrupt long-range ferroelectric order, favor the development of polar nanoregions, and induce a characteristic relaxor-type response. The resulting material exhibits a significantly reduced remanent polarization (0.67 µC/cm2), an increased recoverable energy density (0.74 J/cm3), and a high energy efficiency (99.98%), outperforming conventional BaTiO3. These findings confirm that cationic adding in high-entropy ceramics provides an effective and environmentally friendly pathway for designing high-performance ferroelectric materials suitable for fast-charging, high-energy-density storage applications.
- 28 February 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessEnhancement in energy efficiency in high entropy relaxor ferroelectric ceramics
In this study, we demonstrate the enhancement of dielectric breakdown strength and energy‐storage performance in a high-entropy relaxor ferroelectric ATiO3 ceramic achieved by substituting zirconium for titanium sites. Using high-energy ball milling followed by controlled sintering, a high-entropy composition was successfully synthesized in which Ti4+ was partially substituted by Zr4+. This substitution promotes the formation of secondary phases that disrupt long-range ferroelectric order, favor the development of polar nanoregions, and induce a characteristic relaxor-type response. The resulting material exhibits a significantly reduced remanent polarization (0.67 µC/cm2), an increased recoverable energy density (0.74 J/cm3), and a high energy efficiency (99.98%), outperforming conventional BaTiO3. These findings confirm that cationic adding in high-entropy ceramics provides an effective and environmentally friendly pathway for designing high-performance ferroelectric materials suitable for fast-charging, high-energy-density storage applications.
- Open Access
- 16 February 2026
- Published by Asociacion Latinoamericana de Desarrollo Sustentable y Energias Renovables in Tendencias en energías renovables y sustentabilidad
- Vol. 5 (2) , 152-156
Materiales que Almacenan y Liberan Electricidad de Manera Sorprendentemente Rápida
Los materiales ferroeléctricos relaxores constituyen una familia de cerámicos avanzados capaces de almacenar y liberar energía de manera altamente eficiente, una propiedad clave para el desarrollo de dispositivos electrónicos modernos. Su comportamiento se debe a la presencia de pequeñas regiones internas conocidas como regiones polares nanométricas (PNRs), las cuales responden de una manera dinámica al campo eléctrico externo aplicado. A lo largo del texto se explican los principios que rigen su funcionamiento, las estrategias utilizadas para mejorar sus propiedades y sus principales aplicaciones en capacitores, sistemas de almacenamiento de energía y sensores de alta precisión. Finalmente, se presentan los retos que aun enfrenta su implementación tecnológica.
- 16 February 2026
- Published by Asociacion Latinoamericana de Desarrollo Sustentable y Energias Renovables in Tendencias en energías renovables y sustentabilidad
- Vol. 5 (2) , 152-156
Open AccessMateriales que Almacenan y Liberan Electricidad de Manera Sorprendentemente Rápida
Los materiales ferroeléctricos relaxores constituyen una familia de cerámicos avanzados capaces de almacenar y liberar energía de manera altamente eficiente, una propiedad clave para el desarrollo de dispositivos electrónicos modernos. Su comportamiento se debe a la presencia de pequeñas regiones internas conocidas como regiones polares nanométricas (PNRs), las cuales responden de una manera dinámica al campo eléctrico externo aplicado. A lo largo del texto se explican los principios que rigen su funcionamiento, las estrategias utilizadas para mejorar sus propiedades y sus principales aplicaciones en capacitores, sistemas de almacenamiento de energía y sensores de alta precisión. Finalmente, se presentan los retos que aun enfrenta su implementación tecnológica.
- 19 December 2025
- Published by Elsevier in Materials Research Bulletin
- Vol. 197
Relaxor ferroelectric transition and energy storage enhancement in BaTiO3 ceramics through high-energy ball milling
- 19 December 2025
- Published by Elsevier in Materials Research Bulletin
- Vol. 197
Relaxor ferroelectric transition and energy storage enhancement in BaTiO3 ceramics through high-energy ball milling
- 5 August 2025
- Published by Elsevier in Materialia
- Vol. 43
Facile synthesis of high-entropy lead-free relaxor ferroelectric ceramics via high-energy ball milling
- 5 August 2025
- Published by Elsevier in Materialia
- Vol. 43
Facile synthesis of high-entropy lead-free relaxor ferroelectric ceramics via high-energy ball milling
- 18 October 2024
- Published by Elsevier in Ceramics International
- Vol. 50 (24) , 53533-53543
Evidence of multiferroic behavior in sintered BaTiO3 obtained from high-energy ball-milled powders
- 18 October 2024
- Published by Elsevier in Ceramics International
- Vol. 50 (24) , 53533-53543
Evidence of multiferroic behavior in sintered BaTiO3 obtained from high-energy ball-milled powders
- Open Access
Low Sintering Temperature Effect on Crystal Structure and Dielectric Properties of Lead-Free Piezoelectric Bi0.5Na0.5TiO3-NaFeTiO4
Bi0.5Na0.5TiO3 (BNT) emerges as a promising ferroelectric and piezoelectric lead-free candidate to substitute the contaminant Pb[TixZr1−x]O3 (PZT). However, to obtain optimal ferroelectric and piezoelectric properties, BNT must be sintered at high temperatures. In this work, the reduction of sintering temperature by using iron added to BNT is demonstrated, without significant detriment to the dielectric properties. BNT-xFe with iron from x = 0 to 0.1 mol (∆x = 0.025) were synthesized using high-energy ball milling followed by sintering at 900 °C. XRD analysis confirmed the presence of rhombohedral BNT together with a new phase of NaFeTiO4 (NFT), which was also corroborated using optical and electronic microscopy. The relative permittivity, in the range of 400 to 500 across all the frequencies, demonstrated the stabilization effect of the iron in BNT. Additionally, the presence of iron elevates the transition from ferroelectric to paraelectric structure, increasing it from 330 °C in the iron-free sample to 370 °C in the sample with the maximum iron concentration (0.1 mol). The dielectric losses maintain constant values lower than 0.1. In this case, low dielectric loss values are ideal for ferroelectric and piezoelectric materials, as they ensure minimal energy dissipation. Likewise, the electrical conductivity maintains a semiconductor behavior across a range of 50 Hz to 1 × 106 Hz, indicating the potential of these materials for applications at different frequencies. Additionally, the piezoelectric constant (d33) values decrease slightly when low concentrations of iron are added, maintaining values between 30 and 48 pC/N for BNT-0.025Fe and BNT-0.05Fe, respectively.
Open AccessLow Sintering Temperature Effect on Crystal Structure and Dielectric Properties of Lead-Free Piezoelectric Bi0.5Na0.5TiO3-NaFeTiO4
Bi0.5Na0.5TiO3 (BNT) emerges as a promising ferroelectric and piezoelectric lead-free candidate to substitute the contaminant Pb[TixZr1−x]O3 (PZT). However, to obtain optimal ferroelectric and piezoelectric properties, BNT must be sintered at high temperatures. In this work, the reduction of sintering temperature by using iron added to BNT is demonstrated, without significant detriment to the dielectric properties. BNT-xFe with iron from x = 0 to 0.1 mol (∆x = 0.025) were synthesized using high-energy ball milling followed by sintering at 900 °C. XRD analysis confirmed the presence of rhombohedral BNT together with a new phase of NaFeTiO4 (NFT), which was also corroborated using optical and electronic microscopy. The relative permittivity, in the range of 400 to 500 across all the frequencies, demonstrated the stabilization effect of the iron in BNT. Additionally, the presence of iron elevates the transition from ferroelectric to paraelectric structure, increasing it from 330 °C in the iron-free sample to 370 °C in the sample with the maximum iron concentration (0.1 mol). The dielectric losses maintain constant values lower than 0.1. In this case, low dielectric loss values are ideal for ferroelectric and piezoelectric materials, as they ensure minimal energy dissipation. Likewise, the electrical conductivity maintains a semiconductor behavior across a range of 50 Hz to 1 × 106 Hz, indicating the potential of these materials for applications at different frequencies. Additionally, the piezoelectric constant (d33) values decrease slightly when low concentrations of iron are added, maintaining values between 30 and 48 pC/N for BNT-0.025Fe and BNT-0.05Fe, respectively.