Qiwang Cai
Research Subjects
Qiwang Cai has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Guoqiang Luo
Wuhan University of Technology
1 shared publication - Junguo Li
State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan 430070, China
1 shared publication - Qiang Shen
State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan 430070, China
1 shared publication - Renchi Ding
Chaozhou Branch of Chemistry and Chemical Engineering Guangdong Laboratory, Chaozhou 521000, China
1 shared publication - Rong Tu
Wuhan University of Technology
1 shared publication - Xiaoping Guo
Chaozhou Branch of Chemistry and Chemical Engineering Guangdong Laboratory, Chaozhou 521000, China
1 shared publication
Latest Publications
- Open Access
Zirconia Toughened Alumina Ceramics via Forming Intragranular Structure
The distribution of second phase particles in the microstructure of composite ceramics affects the mechanical properties, and the intragranular structures often result in better properties compared to the intergranular structures. However, it is difficult to obtain composite ceramics with intragranular structure by conventional route. To produce composite ceramics with an intragranular structure in a simpler route. In this work, starting powders with different phase compositions were obtained by the co-precipitation method, and zirconia toughened alumina (ZTA) composite ceramics were prepared with these starting powders by spark plasma sintering (SPS). The results show that it is easier to fabricate ZTA composite ceramics with an intragranular structure by using composite powders containing amorphous or transition phase Al2O3 as starting materials. The phase composition of the powder prepared by the co-precipitation method after calcination at 1100 °C is θ-Al2O3 and t-ZrO2, and the average grain size after sintering at 1500 °C is 1.04 ± 0.28 µm, and the maximum Vickers hardness and fracture toughness of the specimens reach 19.37 ± 0.43 GPa and 6.18 ± 0.06 MPa·m1/2, respectively. The ZrO2 particles were the core of crystallization and grow together with the Al2O3 matrix, forming the intragranular structure of ZTA ceramics. This work may provide a new idea for preparing composite ceramics with intragranular structure.
Open AccessZirconia Toughened Alumina Ceramics via Forming Intragranular Structure
The distribution of second phase particles in the microstructure of composite ceramics affects the mechanical properties, and the intragranular structures often result in better properties compared to the intergranular structures. However, it is difficult to obtain composite ceramics with intragranular structure by conventional route. To produce composite ceramics with an intragranular structure in a simpler route. In this work, starting powders with different phase compositions were obtained by the co-precipitation method, and zirconia toughened alumina (ZTA) composite ceramics were prepared with these starting powders by spark plasma sintering (SPS). The results show that it is easier to fabricate ZTA composite ceramics with an intragranular structure by using composite powders containing amorphous or transition phase Al2O3 as starting materials. The phase composition of the powder prepared by the co-precipitation method after calcination at 1100 °C is θ-Al2O3 and t-ZrO2, and the average grain size after sintering at 1500 °C is 1.04 ± 0.28 µm, and the maximum Vickers hardness and fracture toughness of the specimens reach 19.37 ± 0.43 GPa and 6.18 ± 0.06 MPa·m1/2, respectively. The ZrO2 particles were the core of crystallization and grow together with the Al2O3 matrix, forming the intragranular structure of ZTA ceramics. This work may provide a new idea for preparing composite ceramics with intragranular structure.