JFJoão Victor Guimarães França

João Victor Guimarães França

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


João Victor Guimarães França has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A Review of DC-DC Converters for Modular Solid-State Transformers: Challenges, Comparative Analysis, and Design

    by João Victor G. França, Levy F. Costa, Samuel S. Queiroz, Binhong Cao, Zhicheng Guo

    Solid-State Transformer (SST) technology has advanced significantly in recent decades, driven by the development of wide-bandgap semiconductors, progress in magnetic component design, and continuous optimization of power converter topologies. The modular SST architecture employs multiple power electronic building blocks (PEBBs) that constitute the DC-DC stage. Selecting the most suitable PEBB topology is critical to the overall performance of the SST and remains an open research question. This paper presents a comprehensive overview of the main requirements and challenges associated with the PEBB and reviews the most suitable DC-DC converter topologies for modular SST applications, including a comparative analysis of efficiencies reported in the literature in recent years. The most promising topologies are then identified, and a case study with a detailed design methodology is presented. A review of the latest advancements in medium-frequency transformer technology, which represents a key bottleneck in DC–DC converter design, is also included. Finally, experimental validations considering three different PEBB topologies are performed, achieving high efficiency (98.55% peak), confirming its feasibility for modular SST systems.


  • Voltage and Power Sharing in $LLC$-Based DC/DC Stages of Solid-State Transformer Architectures

    by Samuel S. Queiroz, João Victor G. França, Levy F. Costa

    This paper investigates the power sharing behavior of the dc/dc stage in two main modular solid-state transformer (SST) architectures: modular multilevel converter (MMC)-based and cascaded H-bridge (CHB)-based systems. The dc/dc power module is considered to be an LLC resonant converter operating as a dc transformer. An analytical approach is developed to characterize the impact of component mismatch on module input voltages and power distribution.The analysis enables direct evaluation of the influence of dc/dc stage parameters and identifies the transformer turns ratio $n_{T}$ as the dominant factor governing imbalance. In MMC-based systems, all modules remain active under $n_{T}$ deviations, although voltage and power imbalances occur. In contrast, CHB-based systems are more sensitive to variations in $V_{i}$ and $n_{T}$, and adverse conditions may block power transfer. Experimental results validate the analysis and confirm the accuracy of the developed study.


  • Open Access

    Inherent Third-Harmonic Circulating Current in Delta-CHB STATCOM: Analysis and Compensation

    by João Victor Guimarães França, Dayane Do Carmo Mendonça, Heverton Augusto Pereira, Yu Jin, Qian Xiao, Allan Fagner Cupertino

    The Delta-connected Cascaded H-Bridge (Delta-CHB) is one of the most commonly adopted topologies for Static Synchronous Compensator (STATCOM) systems. Due to the oscillating instantaneous power resulting from the multiplication of sinusoidal voltage and current, a second-order harmonic arises in the Delta-CHB dc-link. In addition to increasing the required capacitance, it introduces a third-harmonic circulating current (THCC), increasing power losses and semiconductor stress. This paper analytically describes this phenomenon and compares two suppression strategies. The proposed model stands out for its simplicity and effectiveness in STATCOM applications, providing a straightforward approach to estimating both the circulating current and the capacitor voltage ripple, also accounting for their mutual influence. The capacitor voltage model exhibited errors lower than 4.5% compared to the simulation and lower than 6.9% compared to the experiment. Similarly, the circulating current model showed an error lower than 3.1% compared to the simulation and under 15% in the experiment. The first suppression strategy analyzed, which involves adding a resonant controller for the circulating current, was able to practically eliminate the circulating current. The second suppression strategy, based on normalization, reduced the circulating current by 30.27% in the experiment, demonstrating sensitivity to the measurement and control implementation delays.


  • Open Access

    On Control of Delta-CHB STATCOM

    by João Victor Guimarães França, Dayane Do Carmo Mendonça, Seleme Isaac Seleme, Heverton Augusto Pereira, Allan Fagner Cupertino

    Static Synchronous Compensators (STATCOMs) are a widespread solution for reactive power compensation and offer advantages such as fast response, smaller footprint, and voltage disturbance support. The Delta-CHB converter is one of the most preferred medium- and high-voltage STATCOM topologies in the industry. However, this topology poses challenges for those researchers who intend to develop new modulation strategies, new strategies for power loss reduction, capacitance reduction schemes, and fault-tolerant schemes due to the relatively complex control structure with several objectives required. Previous publications present control strategies for this topology, but they still lack approaches where the system modeling and the control tuning are performed straightforwardly with enough details and validity. Thus, this paper presents the dynamic model of the Delta-CHB STATCOM that allows the employment of well-known and analytical control tuning strategies for all control loops involved. Also, this work provides some insights regarding the normalization strategy employed and its effects on circulating current. The proposed modeling dynamic response is compared with the simulation results of a real 90MVA STATCOM plant. This paper also provides experimental results that demonstrate the effectiveness of the adopted approach, which reaches all the control objectives (capacitor voltage control, capacitor voltage balancing, circulating current suppression, and reactive power control at the point of common coupling). Furthermore, the normalization strategy reduced the experimental circulating current ripple by 29.95%.


  • Open Access

    Zero Sequence Injection in Delta-CHB STATCOM: Towards Optimum Silicon Area Through Typical Power IGBT/diode Model

    by Dayane Do Carmo Mendonça, João Victor Guimarães França, Heverton Augusto Pereira, Seleme Isaac Seleme Júnior, Allan Fagner Cupertino

    This work quantifies the impact of third harmonic circulating current injection (THCCI) in a Cascaded H-bridge converter in delta configuration (Delta-CHB) for Static Synchronous Compensator (STATCOM) application. The analyses consist of evaluating the impact of THCCI on the silicon area of semiconductor devices. To achieve this objective, this work develops a typical IGBT/Diode model to determine the nominal current of the devices for a given maximum junction temperature. Commercial devices in the voltage classes of 1700 V, 3300 V, 4500 V, and 6500 V were considered, with nominal currents ranging from 150 A to 3600 A. A hybrid approach based on physical-oriented scaling laws and black-box modeling allows to reach a coefficient of determination higher than 79\% for all modeled variables. The results showed an increase of 43.8\% in the active area of the IGBT and 30.87\% in the active area of the diode when the peak cluster current increased by 62\% due to THCCI.


  • Open Access

    Development of a Didactic Platform for Flexible Power Electronic Converters

    by João Victor Guimarães França, Jonathan Hunder Dutra Gherard Pinto, Dayane Do Carmo Mendonça, Renata Oliveira de Sousa, Heverton Augusto Pereira, Seleme Isaac Seleme Júnior, Allan Fagner Cupertino

    Power electronic converters are the subject of several studies and applications. Knowledge about those converters is essential for several technical and undergraduate courses in the field of Electrical Engineering and related areas. The presence of converter modules in laboratories can be beneficial for experimental validations in academic research and educational purposes, for allowing students to have practical contact with different converter topologies and applications. However, the commercially available power converters are generally manufactured for specific applications, with poor versatility and high cost, when applied for academic purposes. For this reason, several laboratories propose the design of versatile converters, mainly for multilevel converter research. Nevertheless, most of these projects present module designs based on half bridge topology due to their low cost. Therefore, this project topology requires more modules to operate as topologies based on a full-bridge converter. Besides, modules based on full-bridge topology can also work in a half-bridge configuration. Thus, this work presents the design of full-bridge modules capable of operating as different types of converters, as well as the project of the dc-link voltage measurement, isolated power supply and bypass circuits. Moreover, this work addresses the heatsink choice, the thermal evaluation for the semiconductor devices and the realization of galvanic isolation between the signal and power circuits.


  • Design considerations for high resolution pipeline ADCs in digital CMOS technology

    by J. Guilherme, P. Figueiredo, P. Azevedo, G. Minderico, A. Leal, J. Vital, J. Franca

    The trade-offs between bandwidth, resolution and power in high dynamic range pipeline analog-to-digital converters are studied when a pure digital CMOS technology is considered. Calibration techniques are presented to achieve the required resolution, and the design optimization methodology of the relevant pipeline building blocks are discussed. An example of a 15-bit 10 Ms/s analog-to-digital pipeline converter implemented in a 0.35 /spl mu/m digital CMOS technology is presented.