Fu Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Fu Liu has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
Jiulian Wang
School of Intelligent Manufacturing and Control Engineering Shanghai Polytechnic University Shanghai China
2 shared publications- Jiulian Wang
School of Intelligent Manufacturing and Control Engineering, Shanghai Polytechnic University, Shanghai 201209, China
2 shared publications Xiong Pan
Aircraft Structure and Stress Division Shanghai Aircraft Design and Research Institute Shanghai China
2 shared publicationsXulong Xi
National Key Laboratory of Strength and Structural Integrity Aircraft Strength Research Institute of China Xi'an China
2 shared publicationsChong Mei
School of Intelligent Manufacturing and Control Engineering Shanghai Polytechnic University Shanghai China
1 shared publication- Chong Mei
School of Intelligent Manufacturing and Control Engineering, Shanghai Polytechnic University, Shanghai 201209, China
1 shared publication
Latest Publications
- Open Access
Mechanistic Elucidation of Dynamic Deformation Transitions and Energy Absorption in Gyroid Structures Across Relative Densities and Compression Velocities
Understanding the rate-dependent deformation and energy absorption behavior of architected lattice structures is essential for developing lightweight impact-resistant materials. This study investigates the effects of loading rate and relative density on the mechanical response of additively manufactured acrylonitrile butadiene styrene (ABS) gyroid structures. Quasi-static and dynamic compression experiments were conducted, and PAM-CRASH finite element simulations were validated against the experimentally investigated compression conditions and subsequently used to explore responses beyond the experimentally accessible velocity range. The results show that both the initial peak crushing force and mean crushing force increase with increasing relative density and loading velocity, with distinct strengthening characteristics from quasi-static loading to high-velocity impact. Increasing loading velocity induces a transition in deformation behavior from homogeneous layer collapse to localized shear banding and fracture. At 100 m/s, the numerical simulations further predict a transition toward inertia-dominated layer-by-layer collapse. Lower-density structures exhibit higher sensitivity to loading rate, with deformation transitions occurring at lower velocities. Although total energy absorption increases with loading velocity, the specific energy absorption shows limited dependence on relative density under high-velocity loading. These results highlight the coupled effects of loading rate and relative density on the deformation and energy absorption of gyroid structures and provide insights into the design of lightweight lattice structures for impact-resistant applications.
Open AccessMechanistic Elucidation of Dynamic Deformation Transitions and Energy Absorption in Gyroid Structures Across Relative Densities and Compression Velocities
Understanding the rate-dependent deformation and energy absorption behavior of architected lattice structures is essential for developing lightweight impact-resistant materials. This study investigates the effects of loading rate and relative density on the mechanical response of additively manufactured acrylonitrile butadiene styrene (ABS) gyroid structures. Quasi-static and dynamic compression experiments were conducted, and PAM-CRASH finite element simulations were validated against the experimentally investigated compression conditions and subsequently used to explore responses beyond the experimentally accessible velocity range. The results show that both the initial peak crushing force and mean crushing force increase with increasing relative density and loading velocity, with distinct strengthening characteristics from quasi-static loading to high-velocity impact. Increasing loading velocity induces a transition in deformation behavior from homogeneous layer collapse to localized shear banding and fracture. At 100 m/s, the numerical simulations further predict a transition toward inertia-dominated layer-by-layer collapse. Lower-density structures exhibit higher sensitivity to loading rate, with deformation transitions occurring at lower velocities. Although total energy absorption increases with loading velocity, the specific energy absorption shows limited dependence on relative density under high-velocity loading. These results highlight the coupled effects of loading rate and relative density on the deformation and energy absorption of gyroid structures and provide insights into the design of lightweight lattice structures for impact-resistant applications.
- Open Access
Rigid–Flexible Coupling Dynamic Analysis and Material Comparison for a Landing Gear Door Linkage with a Critical Flexible Link
To address the structural deformation and mechanism jamming frequently observed in critical linkages during retraction and extension of door-coupled landing gear systems, this study proposes a rigid–flexible coupled dynamic modeling approach. A representative landing gear system was studied, and a high-fidelity rigid–flexible multibody dynamics model was developed based on a conventional rigid-body framework. The left linkage, which was prone to failure, was modeled as a flexible finite element component, while the remaining parts were treated as rigid bodies. A multibody dynamics method based on nonlinear finite element was adopted, incorporating elastoplastic constitutive relations and Lagrange constraint equations. Two materials, ultra-high-strength 300M steel and high-strength 7075-T6 aluminum alloy, were evaluated to investigate the influence of structural stiffness on critical linkage stress and door kinematics during deployment. Results showed that maximum stress occurred at the hinge joint, identified as the critical region for strength assessment. The peak stress for 300M reached approximately 168 MPa, about 8.4% higher than that of 7075-T6. However, 7075-T6 exhibited lower stress oscillation frequency and superior damping performance, which helped suppress high-frequency vibration. Material selection had negligible influence on door centroid displacement, velocity, and opening angle, and the motion trajectories remained highly consistent.
Open AccessRigid–Flexible Coupling Dynamic Analysis and Material Comparison for a Landing Gear Door Linkage with a Critical Flexible Link
To address the structural deformation and mechanism jamming frequently observed in critical linkages during retraction and extension of door-coupled landing gear systems, this study proposes a rigid–flexible coupled dynamic modeling approach. A representative landing gear system was studied, and a high-fidelity rigid–flexible multibody dynamics model was developed based on a conventional rigid-body framework. The left linkage, which was prone to failure, was modeled as a flexible finite element component, while the remaining parts were treated as rigid bodies. A multibody dynamics method based on nonlinear finite element was adopted, incorporating elastoplastic constitutive relations and Lagrange constraint equations. Two materials, ultra-high-strength 300M steel and high-strength 7075-T6 aluminum alloy, were evaluated to investigate the influence of structural stiffness on critical linkage stress and door kinematics during deployment. Results showed that maximum stress occurred at the hinge joint, identified as the critical region for strength assessment. The peak stress for 300M reached approximately 168 MPa, about 8.4% higher than that of 7075-T6. However, 7075-T6 exhibited lower stress oscillation frequency and superior damping performance, which helped suppress high-frequency vibration. Material selection had negligible influence on door centroid displacement, velocity, and opening angle, and the motion trajectories remained highly consistent.
- 24 June 2026
- Published by Wiley in Polymer Composites
- Vol. 47 (18) , 16606-16622
Crashworthiness Analysis of CFRP Composite Stanchion Assemblies of Single‐Frame Sections in Civil Aircraft Sub‐Cargo Structure
To investigate how the inclination angle between the stanchion and the cargo floor beam affects the specific energy absorption (SEA) of sub‐cargo structures under vertical crash loading, vertical drop impact tests are conducted on carbon fiber reinforced polymer (CFRP) composite stanchion assemblies in single‐frame sub‐cargo sections at three angles (78°, 85°, and 90°). Crash numerical models based on the continuum damage mechanics (CDM) are developed using the PAM‐CRASH solver. The simulations accurately reproduce the double‐peak contact force‐time response observed in the experiments, as well as the velocity evolution and failure modes, thereby confirming the reliability of the models. Using the validated approach, additional simulations are performed for five inclination angles between 73° and 90° (73°, 75°, 80°, 83°, and 88°), enabling systematic evaluation of their effects on failure behavior, dynamic response, and SEA . The results show that SEA increases with inclination angle following a sigmoidal trend, characterized by gradual initial growth, a rapid rise, and eventual saturation. The fitted relationship between SEA and inclination angle provides predictive guidance for crashworthiness design of sub‐cargo structures in civil aircraft fuselages.
- 24 June 2026
- Published by Wiley in Polymer Composites
- Vol. 47 (18) , 16606-16622
Crashworthiness Analysis of CFRP Composite Stanchion Assemblies of Single‐Frame Sections in Civil Aircraft Sub‐Cargo Structure
To investigate how the inclination angle between the stanchion and the cargo floor beam affects the specific energy absorption (SEA) of sub‐cargo structures under vertical crash loading, vertical drop impact tests are conducted on carbon fiber reinforced polymer (CFRP) composite stanchion assemblies in single‐frame sub‐cargo sections at three angles (78°, 85°, and 90°). Crash numerical models based on the continuum damage mechanics (CDM) are developed using the PAM‐CRASH solver. The simulations accurately reproduce the double‐peak contact force‐time response observed in the experiments, as well as the velocity evolution and failure modes, thereby confirming the reliability of the models. Using the validated approach, additional simulations are performed for five inclination angles between 73° and 90° (73°, 75°, 80°, 83°, and 88°), enabling systematic evaluation of their effects on failure behavior, dynamic response, and SEA . The results show that SEA increases with inclination angle following a sigmoidal trend, characterized by gradual initial growth, a rapid rise, and eventual saturation. The fitted relationship between SEA and inclination angle provides predictive guidance for crashworthiness design of sub‐cargo structures in civil aircraft fuselages.
- 20 December 2025
- Published by SAGE Publications in Journal of Sandwich Structures & Materials
- Vol. 28 (5) , 817-849
Impact resistance and damage mechanisms of CFRP/foam/aluminum sandwich structures under impact loading by fragments
To enhance the impact resistance of composite sandwich structures subjected to high-velocity fragment impacts, a thin aluminum alloy plate was embedded into a conventional carbon fiber reinforced polymer (CFRP)/foam sandwich. Seven CFRP/foam/aluminum (CFA) configurations with varying aluminum alloy positions were designed and fabricated. High-velocity impact tests were conducted to investigate the dynamic response, energy absorption characteristics, and failure mechanisms of these structures. The results showed that the position of the aluminum alloy plate significantly influenced the impact resistance. Configurations with the aluminum alloy plate positioned near the front CFRP facesheet demonstrated superior performance, as the plate effectively dissipated energy through plastic deformation without contacting the rear facesheet throughout the impact event, thereby avoiding compression stress concentrations and aggravated damage. This configuration led to improved energy absorption and overall impact resistance. As the aluminum alloy plate was moved closer to the rear facesheet, the foam failure mode transitioned from compaction to fragmentation and plug formation, reducing the structure’s energy absorption efficiency. However, when the aluminum alloy plate was located within the rear half of the core, its exact position had a less pronounced effect. Across all configurations, the front facesheet consistently exhibited brittle fracture, while failure of the rear facesheet evolved from fiber breakage to a mixed mode involving fiber fracture and interlaminar delamination as the aluminum plate shifted rearward. Significant interfacial debonding between the aluminum alloy plate and adjacent layers was also observed. Numerical simulations corresponding to the experiments were performed using PAM-CRASH software, and the calculated results showed good agreement with the experimental data, confirming the rationality and accuracy of the numerical model. By combining the fitted correlation equation between the aluminum alloy plate embedding position and the structural energy absorption, the study further revealed the damage evolution of the CFA sandwich structure during the impact process.
- 20 December 2025
- Published by SAGE Publications in Journal of Sandwich Structures & Materials
- Vol. 28 (5) , 817-849
Impact resistance and damage mechanisms of CFRP/foam/aluminum sandwich structures under impact loading by fragments
To enhance the impact resistance of composite sandwich structures subjected to high-velocity fragment impacts, a thin aluminum alloy plate was embedded into a conventional carbon fiber reinforced polymer (CFRP)/foam sandwich. Seven CFRP/foam/aluminum (CFA) configurations with varying aluminum alloy positions were designed and fabricated. High-velocity impact tests were conducted to investigate the dynamic response, energy absorption characteristics, and failure mechanisms of these structures. The results showed that the position of the aluminum alloy plate significantly influenced the impact resistance. Configurations with the aluminum alloy plate positioned near the front CFRP facesheet demonstrated superior performance, as the plate effectively dissipated energy through plastic deformation without contacting the rear facesheet throughout the impact event, thereby avoiding compression stress concentrations and aggravated damage. This configuration led to improved energy absorption and overall impact resistance. As the aluminum alloy plate was moved closer to the rear facesheet, the foam failure mode transitioned from compaction to fragmentation and plug formation, reducing the structure’s energy absorption efficiency. However, when the aluminum alloy plate was located within the rear half of the core, its exact position had a less pronounced effect. Across all configurations, the front facesheet consistently exhibited brittle fracture, while failure of the rear facesheet evolved from fiber breakage to a mixed mode involving fiber fracture and interlaminar delamination as the aluminum plate shifted rearward. Significant interfacial debonding between the aluminum alloy plate and adjacent layers was also observed. Numerical simulations corresponding to the experiments were performed using PAM-CRASH software, and the calculated results showed good agreement with the experimental data, confirming the rationality and accuracy of the numerical model. By combining the fitted correlation equation between the aluminum alloy plate embedding position and the structural energy absorption, the study further revealed the damage evolution of the CFA sandwich structure during the impact process.
- Open Access
Tensile and Interfacial Mechanical Properties for Single Aramid III Fibers under Dynamic Loading
In this study, the traditional mini split Hopkinson tension bar (SHTB) was enhanced for the dynamic mechanical performance testing of single fiber/resin interface of composites. Single Aramid III fibers were modified using a polyamine modification treatment. Quasi-static and dynamic tensile tests of modified single Aramid III fibers were conducted using an electronic tensile testing machine and mini SHTB. The test results indicated that the surface modification employing the Catechol-Tetraethylenepentamine (Cat-TEPA) approach had a negligible effect on the tensile mechanical properties of single Aramid III fibers. The microdroplet method was introduced to measure the dynamic interfacial shear strength (IFSS) of Aramid III fiber/waterborne polyurethane resin using a mini SHTB. The dynamic shear test results revealed an increase in the dynamic shear strength of the modified Aramid III fiber/resin interface from 36.16 MPa to 41.51 MPa. Furthermore, the Scanning Electron Microscope (SEM) photography of the modified single Aramid III fiber after debonding exhibited regular grid structures on the debonding area, which can prevent debonding between the single fiber and the microdroplet, thereby enhancing interfacial shear performance.
Open AccessTensile and Interfacial Mechanical Properties for Single Aramid III Fibers under Dynamic Loading
In this study, the traditional mini split Hopkinson tension bar (SHTB) was enhanced for the dynamic mechanical performance testing of single fiber/resin interface of composites. Single Aramid III fibers were modified using a polyamine modification treatment. Quasi-static and dynamic tensile tests of modified single Aramid III fibers were conducted using an electronic tensile testing machine and mini SHTB. The test results indicated that the surface modification employing the Catechol-Tetraethylenepentamine (Cat-TEPA) approach had a negligible effect on the tensile mechanical properties of single Aramid III fibers. The microdroplet method was introduced to measure the dynamic interfacial shear strength (IFSS) of Aramid III fiber/waterborne polyurethane resin using a mini SHTB. The dynamic shear test results revealed an increase in the dynamic shear strength of the modified Aramid III fiber/resin interface from 36.16 MPa to 41.51 MPa. Furthermore, the Scanning Electron Microscope (SEM) photography of the modified single Aramid III fiber after debonding exhibited regular grid structures on the debonding area, which can prevent debonding between the single fiber and the microdroplet, thereby enhancing interfacial shear performance.
- Open Access
- 1 March 2023
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 2459 (1) , 012016
Study on the Bearing Capacity of Stringer of Large Civil Aircraft Composite Fuselage after Impact Damage
This paper analyzes the post-impact pressure loss test data of eight test configurations of composite fuselage hat-type stringers and measures each composite stringer’s residual compressive strength. It compares the bearing capacity and failure strain of different configurations of stringers with and without BVID initial impact damage. Based on the test data and analysis, the optimal configuration of the stringer is selected, which plays a guiding role in the structural design of composite panels.
- 1 March 2023
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 2459 (1) , 012016
Open AccessStudy on the Bearing Capacity of Stringer of Large Civil Aircraft Composite Fuselage after Impact Damage
This paper analyzes the post-impact pressure loss test data of eight test configurations of composite fuselage hat-type stringers and measures each composite stringer’s residual compressive strength. It compares the bearing capacity and failure strain of different configurations of stringers with and without BVID initial impact damage. Based on the test data and analysis, the optimal configuration of the stringer is selected, which plays a guiding role in the structural design of composite panels.